The abuse of intellectual property rights and regulations in China: a law and economic analysis

From the institutional point of view, the legal system of IPR (intellectual property right, hereafter, IPR) is one of incentive institutions of innovation and it plays very important role in the development of economy. According to the law, the owner of the IPR enjoy a kind of exclusive right to use his IP(intellectual property, hereafter, IP), in other words, he enjoys a kind of legal monopoly position in the market. How to well protect the IPR and at the same time to regulate the abuse of IPR is very interested topic in this knowledge-orientated market and it is the basic research question in this dissertation. In this paper, by way of comparing study and by way of law and economic analyses, and based on the Austrian Economics School’s theories, the writer claims that there is no any contradiction between the IPR and competition law. However, in this new economy (high-technology industries), there is really probability of the owner of IPR to abuse his dominant position. And with the characteristics of the new economy, such as, the high rates of innovation, “instant scalability”, network externality and lock-in effects, the IPR “will vest the dominant undertakings with the power not just to monopolize the market but to shift such power from one market to another, to create strong barriers to enter and, in so doing, granting the perpetuation of such dominance for quite a long time.”1 Therefore, in order to keep the order of market, to vitalize the competition and innovation, and to benefit the customer, in EU and US, it is common ways to apply the competition law to regulate the IPR abuse. In Austrian Economic School perspective, especially the Schumpeterian theories, the innovation/competition/monopoly and entrepreneurship are inter-correlated, therefore, we should apply the dynamic antitrust model based on the AES theories to analysis the relationship between the IPR and competition law. China is still a developing country with relative not so high ability of innovation. Therefore, at present, to protect the IPR and to make good use of the incentive mechanism of IPR legal system is the first important task for Chinese government to do. However, according to the investigation reports,2 based on their IPR advantage and capital advantage, some multinational companies really obtained the dominant or monopoly market position in some aspects of some industries, and there are some IPR abuses conducted by such multinational companies. And then, the Chinese government should be paying close attention to regulate any IPR abuse. However, how to effectively regulate the IPR abuse by way of competition law in Chinese situation, from the law and economic theories’ perspective, from the legislation perspective, and from the judicial practice perspective, there is a long way for China to go!

Alle origini delle case di correzione. Indagine storico-educativa sulle pratiche di internamento in Italia e in Inghilterra

La presente tesi intende compiere un’indagine, dal punto di vista storico-educativo, sulla storia delle case di correzione. Nello specifico si è tentato di analizzare il “caso” del Discolato bolognese, operando un confronto con altre analoghe istituzioni, sorte in due città campione, come Roma e Milano, per quanto riguarda il contesto italiano, e con la situazione inglese, per quanto riguarda il contesto internazionale. Il focus della ricerca si è incentrato sul rapporto tra devianza e internamento, considerato secondo una declinazione pedagogica. A tal proposito si è cercato di far emergere le modalità educative, nonché i principi e le finalità che sottostavano agli interventi istituzionali, non solo soffermandosi su quanto i regolamenti e gli statuti prescrivevano all’interno delle strutture correzionali, ma analizzando la reclusione nella sua effettiva organizzazione quotidiana. Per quanto riguarda la situazione bolognese è stata analizzata un’ampissima documentazione, conservata presso l’Archivio storico Provinciale di Bologna, che ha permesso di svolgere un’analisi di tipo quantitativo su un totale di 1105 individui al fine di delineare le principali caratteristiche demografiche e sociali delle persone internate nel Discolato bolognese. L’interpretazione delle fonti ha permesso anche un’indagine qualitativa, nel tentativo di ricostruire le storie di vita dei singoli reclusi. Da questa ricerca emerge un’immagine complessa delle case di correzione. Nel corso dei secoli, in modo particolare nelle diverse realtà prese in esame, esse hanno assunto caratteristiche e peculiarità differenti. La loro inefficacia fu la motivazione principale che condusse alla definitiva chiusura, quando si fece via via sempre più evidente la difficoltà a tradurre in pratica ciò che regolamenti e statuti - a livello teorico - prescrivevano.

Fiscal Constitutions: An Empirical Approach

The overarching question of this dissertation is: “why does the public debt grow, and why are fiscal (debt) crises repetitive and so widespread?” A special focus in answering this question is given to a fiscal constitution, which contains a country-specific set of laws, rules and regulations, and guides decision making in the area of fiscal policy. By shaping incentives and limiting arbitrariness, the fiscal constitution determines the course of fiscal policy and fiscal outcomes in the long term. This dissertation does not give, however, an exhaustive response to the overarching question. Instead it asks much narrower questions, which are selected after reviewing and identifying the main weaknesses and gaps in the modern literature on fiscal constitutions.

Constraint handling rules. Compositional semantics and program transformation

This thesis intends to investigate two aspects of Constraint Handling Rules (CHR). It proposes a compositional semantics and a technique for program transformation. CHR is a concurrent committed-choice constraint logic programming language consisting of guarded rules, which transform multi-sets of atomic formulas (constraints) into simpler ones until exhaustion [Frü06] and it belongs to the declarative languages family. It was initially designed for writing constraint solvers but it has recently also proven to be a general purpose language, being as it is Turing equivalent [SSD05a]. Compositionality is the first CHR aspect to be considered. A trace based compositional semantics for CHR was previously defined in [DGM05]. The reference operational semantics for such a compositional model was the original operational semantics for CHR which, due to the propagation rule, admits trivial non-termination. In this thesis we extend the work of [DGM05] by introducing a more refined trace based compositional semantics which also includes the history. The use of history is a well-known technique in CHR which permits us to trace the application of propagation rules and consequently it permits trivial non-termination avoidance [Abd97, DSGdlBH04]. Naturally, the reference operational semantics, of our new compositional one, uses history to avoid trivial non-termination too. Program transformation is the second CHR aspect to be considered, with particular regard to the unfolding technique. Said technique is an appealing approach which allows us to optimize a given program and in more detail to improve run-time efficiency or spaceconsumption. Essentially it consists of a sequence of syntactic program manipulations which preserve a kind of semantic equivalence called qualified answer [Frü98], between the original program and the transformed ones. The unfolding technique is one of the basic operations which is used by most program transformation systems. It consists in the replacement of a procedure-call by its definition. In CHR every conjunction of constraints can be considered as a procedure-call, every CHR rule can be considered as a procedure and the body of said rule represents the definition of the call. While there is a large body of literature on transformation and unfolding of sequential programs, very few papers have addressed this issue for concurrent languages. We define an unfolding rule, show its correctness and discuss some conditions in which it can be used to delete an unfolded rule while preserving the meaning of the original program. Finally, confluence and termination maintenance between the original and transformed programs are shown. This thesis is organized in the following manner. Chapter 1 gives some general notion about CHR. Section 1.1 outlines the history of programming languages with particular attention to CHR and related languages. Then, Section 1.2 introduces CHR using examples. Section 1.3 gives some preliminaries which will be used during the thesis. Subsequentely, Section 1.4 introduces the syntax and the operational and declarative semantics for the first CHR language proposed. Finally, the methodologies to solve the problem of trivial non-termination related to propagation rules are discussed in Section 1.5. Chapter 2 introduces a compositional semantics for CHR where the propagation rules are considered. In particular, Section 2.1 contains the definition of the semantics. Hence, Section 2.2 presents the compositionality results. Afterwards Section 2.3 expounds upon the correctness results. Chapter 3 presents a particular program transformation known as unfolding. This transformation needs a particular syntax called annotated which is introduced in Section 3.1 and its related modified operational semantics !0t is presented in Section 3.2. Subsequently, Section 3.3 defines the unfolding rule and prove its correctness. Then, in Section 3.4 the problems related to the replacement of a rule by its unfolded version are discussed and this in turn gives a correctness condition which holds for a specific class of rules. Section 3.5 proves that confluence and termination are preserved by the program modifications introduced. Finally, Chapter 4 concludes by discussing related works and directions for future work.

Meta-models, environment and layers: agent-oriented engineering of complex systems

Traditional software engineering approaches and metaphors fall short when applied to areas of growing relevance such as electronic commerce, enterprise resource planning, and mobile computing: such areas, in fact, generally call for open architectures that may evolve dynamically over time so as to accommodate new components and meet new requirements. This is probably one of the main reasons that the agent metaphor and the agent-oriented paradigm are gaining momentum in these areas. This thesis deals with the engineering of complex software systems in terms of the agent paradigm. This paradigm is based on the notions of agent and systems of interacting agents as fundamental abstractions for designing, developing and managing at runtime typically distributed software systems. However, today the engineer often works with technologies that do not support the abstractions used in the design of the systems. For this reason the research on methodologies becomes the basic point in the scientific activity. Currently most agent-oriented methodologies are supported by small teams of academic researchers, and as a result, most of them are in an early stage and still in the first context of mostly \academic" approaches for agent-oriented systems development. Moreover, such methodologies are not well documented and very often defined and presented only by focusing on specific aspects of the methodology. The role played by meta- models becomes fundamental for comparing and evaluating the methodologies. In fact a meta-model specifies the concepts, rules and relationships used to define methodologies. Although it is possible to describe a methodology without an explicit meta-model, formalising the underpinning ideas of the methodology in question is valuable when checking its consistency or planning extensions or modifications. A good meta-model must address all the different aspects of a methodology, i.e. the process to be followed, the work products to be generated and those responsible for making all this happen. In turn, specifying the work products that must be developed implies dening the basic modelling building blocks from which they are built. As a building block, the agent abstraction alone is not enough to fully model all the aspects related to multi-agent systems in a natural way. In particular, different perspectives exist on the role that environment plays within agent systems: however, it is clear at least that all non-agent elements of a multi-agent system are typically considered to be part of the multi-agent system environment. The key role of environment as a first-class abstraction in the engineering of multi-agent system is today generally acknowledged in the multi-agent system community, so environment should be explicitly accounted for in the engineering of multi-agent system, working as a new design dimension for agent-oriented methodologies. At least two main ingredients shape the environment: environment abstractions - entities of the environment encapsulating some functions -, and topology abstractions - entities of environment that represent the (either logical or physical) spatial structure. In addition, the engineering of non-trivial multi-agent systems requires principles and mechanisms for supporting the management of the system representation complexity. These principles lead to the adoption of a multi-layered description, which could be used by designers to provide different levels of abstraction over multi-agent systems. The research in these fields has lead to the formulation of a new version of the SODA methodology where environment abstractions and layering principles are exploited for en- gineering multi-agent systems.

Catalytic liquid- and gas-phase oxidations for the synthesis of intermediates and specialty chemicals: some examples of industrial relevance

Nowadays, it is clear that the target of creating a sustainable future for the next generations requires to re-think the industrial application of chemistry. It is also evident that more sustainable chemical processes may be economically convenient, in comparison with the conventional ones, because fewer by-products means lower costs for raw materials, for separation and for disposal treatments; but also it implies an increase of productivity and, as a consequence, smaller reactors can be used. In addition, an indirect gain could derive from the better public image of the company, marketing sustainable products or processes. In this context, oxidation reactions play a major role, being the tool for the production of huge quantities of chemical intermediates and specialties. Potentially, the impact of these productions on the environment could have been much worse than it is, if a continuous efforts hadn’t been spent to improve the technologies employed. Substantial technological innovations have driven the development of new catalytic systems, the improvement of reactions and process technologies, contributing to move the chemical industry in the direction of a more sustainable and ecological approach. The roadmap for the application of these concepts includes new synthetic strategies, alternative reactants, catalysts heterogenisation and innovative reactor configurations and process design. Actually, in order to implement all these ideas into real projects, the development of more efficient reactions is one primary target. Yield, selectivity and space-time yield are the right metrics for evaluating the reaction efficiency. In the case of catalytic selective oxidation, the control of selectivity has always been the principal issue, because the formation of total oxidation products (carbon oxides) is thermodynamically more favoured than the formation of the desired, partially oxidized compound. As a matter of fact, only in few oxidation reactions a total, or close to total, conversion is achieved, and usually the selectivity is limited by the formation of by-products or co-products, that often implies unfavourable process economics; moreover, sometimes the cost of the oxidant further penalizes the process. During my PhD work, I have investigated four reactions that are emblematic of the new approaches used in the chemical industry. In the Part A of my thesis, a new process aimed at a more sustainable production of menadione (vitamin K3) is described. The “greener” approach includes the use of hydrogen peroxide in place of chromate (from a stoichiometric oxidation to a catalytic oxidation), also avoiding the production of dangerous waste. Moreover, I have studied the possibility of using an heterogeneous catalytic system, able to efficiently activate hydrogen peroxide. Indeed, the overall process would be carried out in two different steps: the first is the methylation of 1-naphthol with methanol to yield 2-methyl-1-naphthol, the second one is the oxidation of the latter compound to menadione. The catalyst for this latter step, the reaction object of my investigation, consists of Nb2O5-SiO2 prepared with the sol-gel technique. The catalytic tests were first carried out under conditions that simulate the in-situ generation of hydrogen peroxide, that means using a low concentration of the oxidant. Then, experiments were carried out using higher hydrogen peroxide concentration. The study of the reaction mechanism was fundamental to get indications about the best operative conditions, and improve the selectivity to menadione. In the Part B, I explored the direct oxidation of benzene to phenol with hydrogen peroxide. The industrial process for phenol is the oxidation of cumene with oxygen, that also co-produces acetone. This can be considered a case of how economics could drive the sustainability issue; in fact, the new process allowing to obtain directly phenol, besides avoiding the co-production of acetone (a burden for phenol, because the market requirements for the two products are quite different), might be economically convenient with respect to the conventional process, if a high selectivity to phenol were obtained. Titanium silicalite-1 (TS-1) is the catalyst chosen for this reaction. Comparing the reactivity results obtained with some TS-1 samples having different chemical-physical properties, and analyzing in detail the effect of the more important reaction parameters, we could formulate some hypothesis concerning the reaction network and mechanism. Part C of my thesis deals with the hydroxylation of phenol to hydroquinone and catechol. This reaction is already industrially applied but, for economical reason, an improvement of the selectivity to the para di-hydroxilated compound and a decrease of the selectivity to the ortho isomer would be desirable. Also in this case, the catalyst used was the TS-1. The aim of my research was to find out a method to control the selectivity ratio between the two isomers, and finally to make the industrial process more flexible, in order to adapt the process performance in function of fluctuations of the market requirements. The reaction was carried out in both a batch stirred reactor and in a re-circulating fixed-bed reactor. In the first system, the effect of various reaction parameters on catalytic behaviour was investigated: type of solvent or co-solvent, and particle size. With the second reactor type, I investigated the possibility to use a continuous system, and the catalyst shaped in extrudates (instead of powder), in order to avoid the catalyst filtration step. Finally, part D deals with the study of a new process for the valorisation of glycerol, by means of transformation into valuable chemicals. This molecule is nowadays produced in big amount, being a co-product in biodiesel synthesis; therefore, it is considered a raw material from renewable resources (a bio-platform molecule). Initially, we tested the oxidation of glycerol in the liquid-phase, with hydrogen peroxide and TS-1. However, results achieved were not satisfactory. Then we investigated the gas-phase transformation of glycerol into acrylic acid, with the intermediate formation of acrolein; the latter can be obtained by dehydration of glycerol, and then can be oxidized into acrylic acid. Actually, the oxidation step from acrolein to acrylic acid is already optimized at an industrial level; therefore, we decided to investigate in depth the first step of the process. I studied the reactivity of heterogeneous acid catalysts based on sulphated zirconia. Tests were carried out both in aerobic and anaerobic conditions, in order to investigate the effect of oxygen on the catalyst deactivation rate (one main problem usually met in glycerol dehydration). Finally, I studied the reactivity of bifunctional systems, made of Keggin-type polyoxometalates, either alone or supported over sulphated zirconia, in this way combining the acid functionality (necessary for the dehydrative step) with the redox one (necessary for the oxidative step). In conclusion, during my PhD work I investigated reactions that apply the “green chemistry” rules and strategies; in particular, I studied new greener approaches for the synthesis of chemicals (Part A and Part B), the optimisation of reaction parameters to make the oxidation process more flexible (Part C), and the use of a bioplatform molecule for the synthesis of a chemical intermediate (Part D).

Stone architecture in Carso plateau. Settlement patterns and construction techniques of historic buildings

The use of stone and its types of processing have been very important in the vernacular architecture of the cross-border Carso. In Carso this represents an important legacy of centuries and has a uniform typological characteristic to a great extent. The stone was the main constituent of the local architecture, setting and shaping the human environment, incorporating the history of places through their specific symbolic and constructive language. The primary aim of this research is the recognition of the constructive rules and the values embedded in the Carso rural architecture by use and processing of stone. Central to this investigation is the typological reading, aimed to analyze the constructive language expressed by this legacy, through the analysis of the relationship between type, technique and material.

La responsabilità del vettore terrestre nel trasporto di cose per conto terzi: riflessi assicurativi.

La ricerca ha ad oggetto l’analisi della disciplina della responsabilità del vettore terrestre di merci per conto terzi ed i riflessi che detta disciplina ha avuto modo di svilupparsi nel mercato assicurativo. L’attenzione è stata rivolta al contratto di trasporto di cose in generale, seguendone la disciplina codicistica e le evoluzioni legislative intervenute. Particolare rilievo assume la novella apportata all’art. 1696 c.c., introdotta dall’art. 10 del Dlgs. 286/2005, grazie alla quale l’ordinamento italiano ha potuto codificare il limite di indennizzo dovuto dal vettore nell’ipotesi di colpa lieve, L’introduzione del limite legale di indennizzo per le ipotesi di responsabilità per perdita o avaria della merce trasportata ha generato nel mondo assicurativo interessanti reazioni. L’elaborato esamina anche l’evoluzione giurisprudenziale formatisi in tema di responsabilità vettoriale, evidenziando il crescente rigore imposto dalla giurisprudenza fondato sul principio del receptum. Tale fenomeno ha visto immediata reazione nel mercato assicurativo il quale, sulla base di testi contrattuali non dissimili tra le diverse compagnie di assicurazioni operanti sul mercato domestico e che traevano origine dai formulari approvati dall’ANIA, ha seguito l’evoluzione giurisprudenziale apportando significative restrizioni al rischio tipico previsto dalle coperture della responsabilità civile vettoriale. La ricerca si è poi focalizzata sull’esame delle più comuni clausole contemplate dalle polizze di assicurazioni di responsabilità civile e sul loro significato alla luce delle disposizioni di legge in materia. Tale analisi riveste preminente interesse poiché consente di verificare in concreto come l’assicurazione possa effettivamente costituire per l’impresa di trasporto non tanto un costo bensì una opportunità di risparmio da un lato ed un modello comportamentale, sebbene indotto, dall’altro lato per il raggiungimento di quei canoni di diligenza che qualsiasi operatore del settore dovrebbe tenere durante l’esecuzione del trasporto ed il cui venir meno determina, come detto, sensibili effetti pregiudizievoli di carattere economico.

Sicurezza dei prodotti alimentari e la responsabilità civile nell'Unione europea e negli Stati Uniti: tecniche a confronto

Le profonde trasformazioni che hanno interessato l’industria alimentare, unitamente alle accresciute capacità delle scienze mediche ed epidemiologiche di individuare nessi causali tra il consumo di determinate sostanze e l’insorgere di patologie, hanno imposto al legislatore di intervenire nella materia della c.d. sicurezza alimentare mettendo in atto sistemi articolati e complessi tesi a tutelare la salute dei consociati. Quest’ultimo obiettivo viene perseguito, da un lato, mediante disposizioni di natura pubblicistica e di carattere preventivo e, dall’altro lato, dallo strumento della responsabilità civile. Le due prospettive di tutela della salute delle persone costituiscono parti distinte ma al tempo stesso fortemente integrate in una logica unitaria. Questa prospettiva emerge chiaramente nel sistema statunitense: in quel ordinamento la disciplina pubblicistica della sicurezza degli alimenti – definita dalla Food and Drug Administration – costituisce un punto di riferimento imprescindibile anche quando si tratta di stabilire se un prodotto alimentare è difettoso e se, di conseguenza, il produttore è chiamato a risarcire i danni che scaturiscono dal suo utilizzo. L’efficace sinergia che si instaura tra la dimensione pubblicistica del c.d. Public Enforcement e quella risarcitoria (Private Enforcement) viene ulteriormente valorizzata dalla presenza di efficaci strumenti di tutela collettiva tra i quali la class action assume una importanza fondamentale. Proprio muovendo dall’analisi del sistema statunitense, l’indagine si appunta in un primo momento sull’individuazione delle lacune e delle criticità che caratterizzano il sistema nazionale e, più in generale quello comunitario. In un secondo momento l’attenzione si focalizza sull’individuazione di soluzioni interpretative e de iure condendo che, anche ispirandosi agli strumenti di tutela propri del diritto statunitense, contribuiscano a rendere maggiormente efficace la sinergia tra regole preventive sulla sicurezza alimentare e regole risarcitorie in materia di responsabilità del produttore.

Agrofood chain analysis: production, commercialisation and consumption of healthy food for population at risk of poverty in Italy

Italy registers a fast increase of low income population. Academics and policy makers consider income inequalities as a key determinant for low or inadequate healthy food consumption. Thus the objective is to understand how to overcome the agrofood chain barriers towards healthy food production, commercialisation and consumption for population at risk of poverty (ROP) in Italy. The study adopts a market oriented food chain approach, focusing the research ambit on ROP consumers, processing industries and retailers. The empirical investigation adopts a qualitative methodology with an explorative approach. The actors are investigated through 4 focus groups for consumers and carrying out 27 face to face semi-structured interviews for industries and retailers’ representatives. The results achieved provide the perceptions of each actor integrated into an overall chain approach. The analysis shows that all agrofood actors lack of an adequate level of knowledge towards healthy food definition. Food industries and retailers also show poor awareness about ROP consumers’ segment. In addition they perceive that the high costs for producing healthy food conflict with the low economic performances expected from ROP consumers’ segment. These aspects induce a scarce interest in investing on commercialisation strategies for healthy food for ROP consumers. Further ROP consumers show other notable barriers to adopt healthy diets caused, among others, by a personal strong negative attitude and lack of motivation. The personal barriers are also negatively influenced by several external socio-economic factors. The solutions to overcome the barriers shall rely on the improvement of the agrofood chain internal relations to identify successful strategies for increasing interest on low cost healthy food. In particular the focus should be on improved collaboration on innovation adoption and marketing strategies, considering ROP consumers’ preferences and needs. An external political intervention is instead necessary to fill the knowledge and regulations’ gaps on healthy food issues.

Il finanziamento dei partiti politici e delle campagne elettorali: modelli a confronto.

La tesi si propone come obiettivo di dimostrare nel quadro di un’indagine comparatistica l’importanza della tematica del finanziamento della politica, del rapporto tra denaro e politica, nelle democrazie contemporanee. In questo senso ci si propone di sviluppare i nessi esistenti nell’ambito del tema del finanziamento fra disciplina dei partiti, disciplina delle campagne elettorali e, più in generale, disciplina del sistema elettorale in senso stretto e della forma di governo; di descrivere il complesso quadro giuridico in materia di diritto della finanza politica, oggetto di frequenti aggiornamenti e in continua evoluzione, in alcuni casi anche in via giurisprudenziale, quale risulta emergere dallo studio di ciascun ordinamento considerato; e di definire in conclusione i precisi contorni dei due distinti modelli di «finanziamento della politica» ricostruiti dalla ricerca politologica come modello statalista o pubblico, da una parte, e modello liberale o volontario, dall’altra, pur nelle specificità di ogni contesto istituzionale

Interpreting Judgements using Knowledge Representation Methods and Computational Models of Argument

The goal of the present research is to define a Semantic Web framework for precedent modelling, by using knowledge extracted from text, metadata, and rules, while maintaining a strong text-to-knowledge morphism between legal text and legal concepts, in order to fill the gap between legal document and its semantics. The framework is composed of four different models that make use of standard languages from the Semantic Web stack of technologies: a document metadata structure, modelling the main parts of a judgement, and creating a bridge between a text and its semantic annotations of legal concepts; a legal core ontology, modelling abstract legal concepts and institutions contained in a rule of law; a legal domain ontology, modelling the main legal concepts in a specific domain concerned by case-law; an argumentation system, modelling the structure of argumentation. The input to the framework includes metadata associated with judicial concepts, and an ontology library representing the structure of case-law. The research relies on the previous efforts of the community in the field of legal knowledge representation and rule interchange for applications in the legal domain, in order to apply the theory to a set of real legal documents, stressing the OWL axioms definitions as much as possible in order to enable them to provide a semantically powerful representation of the legal document and a solid ground for an argumentation system using a defeasible subset of predicate logics. It appears that some new features of OWL2 unlock useful reasoning features for legal knowledge, especially if combined with defeasible rules and argumentation schemes. The main task is thus to formalize legal concepts and argumentation patterns contained in a judgement, with the following requirement: to check, validate and reuse the discourse of a judge - and the argumentation he produces - as expressed by the judicial text.

Fresh Produce Safety and Good Agricultural Practices: Stakeholders' Perception and Consumers' Choice in Thailand

Concerns of Thai consumers on food safety have been recently increasing, especially in urban areas and for fresh produce because food safety scandals, such as chemical residues on fresh produce (e.g., cabbage) still frequently occur. The Thai government tried to meet consumer needs by imposing in the domestic market a stronger regulation aimed at increasing the baseline level of food safety assurance and by introducing a voluntary standard (based on Good Agricultural Practices or GAPs and known as Q-GAP) and the related food safety label (i.e., Q mark). However, since standards and regulations are weakly implemented in the domestic market compared to exported products, there is still a lack of Thai consumers’ confidence in the safety of local food products. In this work the current situation of GAPs adoption in Thai fresh produce production is analysed. Furthermore, it is studied whether Thai consumers place value on food safety labels available on the market, to know whether consumer demand could drive the market of certified safer products. This study contains three essays: 1) a review of the literature, 2) a qualitative study on stakeholders' perception toward GAPs adoption and 3) a quantitative study, aimed at analysing consumers' preferences and willingness-to-pay for food safety labels on fresh produce using a discrete choice experiment. This dissertation contributes to the economics of quality assurance and labelling, specifically addressing GAPs and food safety label in the fresh produce supply chain. Results show that Q-GAP could be effectively used to improve food safety in Thai domestic market, but its credibility should be improved. Stakeholder’s awareness toward food safety issues and the delivery of reliable and sound information are crucial. Thai consumers are willing to pay a premium price for food safety labelled produce over unlabelled ones. Implications for both government and business decision-makers are discussed.