Pyrolysis-Gas Chromatography-Mass Spectometry and Chemometric Analysis for the Characterization of Complex Matrices

The present PhD thesis was focused on the development and application of chemical methodology (Py-GC-MS) and data-processing method by multivariate data analysis (chemometrics). The chromatographic and mass spectrometric data obtained with this technique are particularly suitable to be interpreted by chemometric methods such as PCA (Principal Component Analysis) as regards data exploration and SIMCA (Soft Independent Models of Class Analogy) for the classification. As a first approach, some issues related to the field of cultural heritage were discussed with a particular attention to the differentiation of binders used in pictorial field. A marker of egg tempera the phosphoric acid esterified, a pyrolysis product of lecithin, was determined using HMDS (hexamethyldisilazane) rather than the TMAH (tetramethylammonium hydroxide) as a derivatizing reagent. The validity of analytical pyrolysis as tool to characterize and classify different types of bacteria was verified. The FAMEs chromatographic profiles represent an important tool for the bacterial identification. Because of the complexity of the chromatograms, it was possible to characterize the bacteria only according to their genus, while the differentiation at the species level has been achieved by means of chemometric analysis. To perform this study, normalized areas peaks relevant to fatty acids were taken into account. Chemometric methods were applied to experimental datasets. The obtained results demonstrate the effectiveness of analytical pyrolysis and chemometric analysis for the rapid characterization of bacterial species. Application to a samples of bacterial (Pseudomonas Mendocina), fungal (Pleorotus ostreatus) and mixed- biofilms was also performed. A comparison with the chromatographic profiles established the possibility to: • Differentiate the bacterial and fungal biofilms according to the (FAMEs) profile. • Characterize the fungal biofilm by means the typical pattern of pyrolytic fragments derived from saccharides present in the cell wall. • Individuate the markers of bacterial and fungal biofilm in the same mixed-biofilm sample.

Chemical analysis and reactivity of biomass pyrolysis products. Application to the development of carbon-neutral biofuels and chemicals

In this dissertation the pyrolytic conversion of biomass into chemicals and fuels was investigated from the analytical point of view. The study was focused on the liquid (bio-oil) and solid (char) fractions obtainable from biomass pyrolysis. The drawbacks of Py-GC-MS described so far were partially solved by coupling different analytical configurations (Py-GC-MS, Py-GC-MIP-AED and off-line Py-SPE and Py-SPME-GC-MS with derivatization procedures). The application of different techniques allowed a satisfactory comparative analysis of pyrolysis products of different biomass and a high throughput screening on effect of 33 catalysts on biomass pyrolysis. As the results of the screening showed, the most interesting catalysts were those containing copper (able to reduce the high molecular weight fraction of bio-oil without large yield decrease) and H-ZSM-5 (able to entirely convert the bio-oil into “gasoline like” aromatic products). In order to establish the noxious compounds content of the liquid product, a clean-up step was included in the Py-SPE procedure. This allowed to investigate pollutants (PAHs) generation from pyrolysis and catalytic pyrolysis of biomass. In fact, bio-oil from non-catalytic pyrolysis of biomass showed a moderate PAHs content, while the use of H-ZSM-5 catalyst for bio-oil up-grading determined an astonishing high production of PAHs (if compared to what observed in alkanes cracking), indicating an important concern in the substitution fossil fuel with bio-oil derived from biomass. Moreover, the analytical procedures developed in this thesis were directly applied for the detailed study of the most useful process scheme and up-grading route to chemical intermediates (anhydrosugars), transportation fuels or commodity chemicals (aromatic hydrocarbons). In the applied study, poplar and microalgae biomass were investigated and overall GHGs balance of pyrolysis of agricultural residues in Ravenna province was performed. A special attention was put on the comparison of the effect of bio-char different use (fuel or as soil conditioner) on the soil health and GHGs emissions.

Fiber-reinforced ceramics for thermostructural applications, produced by polymer impregnation pyrolysis

Several CFCC (Continuous Fiber Composite Ceramics) production processes were tested, concluding that PIP (Polymer Impregnation, or Infiltration, Pyrolysis) and CBC (Chemically Bonded Ceramics) based procedures have interesting potential applications in the construction and transportation fields, thanks to low costs to get potentially useful thermomechanical performances. Among the different processes considered during the Doctorate (from the synthesis of new preceramic polymers, to the PIP production of SiC / SiC composites) the more promising results came from the PIP process with poly-siloxanes on basalt fabrics preforms. Low processing time and costs, together with fairly good thermomechanical properties were demonstrated, even after only one or two PIP steps in nitrogen flow. In alternative, pyrolysis in vacuum was also tested, a procedure still not discussed in literature, but which could originate an interesting reduction of production costs, with only a moderate detrimental effect on the mechanical properties. The resulting CFCC is a basalt / SiCO composite that can be applied for continuous operation up to 600°C, also in oxidant environment, as TG and XRD demonstrated. The failure upon loading is generally pseudo-plastic, being interlaminar delamination the most probable rupture mechanism. . The strength depends on several different factors (microstructure, polymer curing and subsequent ceramic phase evolution, fiber pull-out, fiber strength, fiber percentage) and can only be optimized empirically. In order to be open minded in selecting the best technology, also CBC (Chemically Bonded Ceramics) matrixes were considered during this Doctorate, making some preliminary investigations on fire-resistant phosphate cements. Our results on a commercial product evidenced some interesting thermomechanical capabilities, even after thermal treatments. However the experiments showed also phase change and possible cracking and deformations even on slow drying (at 130°C) and easy rehydration upon exposure to environmental humidity.

Liquid biofuels for aviation: valorisation of the by-product biochar

Biochar is a carbonaceous material produced through pyrolysis of biomass. One promising application of biochar is phosphorus recovery from wastewater. Phosphorus is a vital nutrient for plant growth, but its use in fertilizers often leads to runoff or leaching. Wastewater treatment plants discharge large amounts of phosphorus-rich wastewater, contributing to eutrophication and ecological harm. Biochar can sorb phosphorus, retaining it in solid form. In this thesis, two composites made of biomass and dolomite or shells exhibited superior phosphate sorption compared to biochar alone, reaching up to 100% sorption. Biochar also finds use in soil remediation, specifically in cleaning up contaminated soil. Polycyclic aromatic hydrocarbons (PAHs), which can be carcinogenic and toxic, can be present in soil. Biochar adsorb PAHs, preventing their leakage or bioaccumulation. Hetero-PAHs, a subclass of PAHs with nitrogen, sulfur, or oxygen atoms in their ring structures, are particularly challenging to degrade. Little is known about their behavior or sorption onto biochar. In this thesis, biochar and activated carbon were effective in immobilizing PAHs and hetero-PAHs in real soils, with rates of immobilization reaching 100%. Biochar performed equally or better than activated carbon, offering a cost-effective alternative due to its lower price. Biochar reduce of metal(loid)s mobility in soil. Metal(loid)s like lead, zinc, and arsenic can contaminate soil through industrial sources, agricultural runoff, and other pollution, and are toxic to plants and animals, rendering the soil unsuitable for agriculture. When biochar is added to contaminated soil, it binds to metal(loid)s, preventing leaching into the environment. A biomass-dolomite composite was compared to activated carbon for immobilizing metal(loid)s in contaminated soils. The composite generally outperformed activated carbon and exhibited the ability to immobilize arsenic. In summary, biochar shows promise for phosphorus recovery, soil remediation, and reducing the mobility of heavy metals, offering cost-effective and sustainable solutions to these environmental challenges.

Product placement e libertà di espressione

Object of the search is the advertising phenomenon of the "product placement", with reference to that it has been investigated legality’s limits, as well as the relationship with the constitutionally protected liberty of expression. Particularly, it has been analyzed, in first place, the problem of the relationship between the freedom of expression and the liberty of economic initiative, with particular reference to the different circles of guardianship to these prepared: or, larger, the one provided for the first from the 21th article of Costitution, more circumscribed, instead, the one established in the 41th article of Costitution, with reference to the second. This analysis has been made with the purpose to investigate the coordination among such liberties in those forms of communications that, for the proper peculiarities that characterize them, can be qualified, according to the concrete circumstances in which they are spread, so much forms of liberty of expression, how much exercise of an activity of enterprise. Under this last profile, it has been taken attention on the advertising activity and, specially, on the non transparent publicities, or not immediately perceivable as such from their receivers, and, therefore, in contrast with the advertising trasparence’s principle: or, the so-called cases of hidden publicity, what the editorial publicity, both "in narrow sense" both "in general sense", as well as the phenomenon of the product placement (or positioning of product), by now diffused in the commercial routine. Therefore, it has been proceeded to a complete and exhaustive examination of innovations introduced by the recent legislative discipline in subject of “planned placement of marks and products” in the cinema works, appraising, in the specific one, the effects, juridical and no juridical, consequential from the introduction of a first form of regulation of the phenomenon of the product placement and, particularly, from the express provision about the legality of the use to such advertising, if it has realized according to specific requirements or condition. In relationship to such profile, it has been also investigate limits (sub kind of normative gaps) from which the recently introduced discipline in subject would seem characterized. Finally, a further circle of investigation has concerned the possible organization of the phenomenon under a negotiate aspect, as particular contract of advertising, in which the object consists in an promotional activity. Concerning this, the experience of foreign countries (above all the Anglo-Saxon one) has been very important, because of the absence, in our arrangement, of a general normative discipline about advertising contracts. Consequently, I’ve investigated principal characteristics of similar contracts, in first place the atypicalness, because of the lack, in Italy, of a legislative discipline of this contract. Such investigation has also been developed through a comparation between the positioning of product and the other advertising contracts, among which, particularly, the sponsorship, as well as the contracts for the advertising exploitation of the name and other people's image, and, specially, the contract of testimonial and the contract of endorsement.

The effect of adding features on product attractiveness: the role of product perceived congruity

Technological progress has been enabling companies to add disparate features to their existing products. This research investigates the effect of adding more features on consumers’ evaluation of the product, by examining in particular the role of the congruity of the features added with the base product as a variable the moderates the effect of increasing the number of features. Grounding on schema-congruity theory, I propose that the cognitive elaboration associated with the product congruity of the features added explains consumers’ evaluation as the number of new features increases. In particular, it is shown that consumers perceive a benefit from increasing the number of features only when these features are congruent with the product. The underlying mechanisms that explains this finding predicts that when the number of incongruent features increases the cognitive resources necessary to elaborate such incongruities increase and consumers are not willing to spend such resources. However, I further show that when encouraged to consider the new features thoughtfully, consumers do seem able to infer value from increasing the number of moderately incongruent features. Nonetheless, this finding does not apply for those new features that are extremely incongruent with the product. Further evidence for consumers’ ability to resolve the moderate incongruity associated with adding more features is also shown, by studying the moderating role of temporal construal. I propose that consumers perceive an increase in product evaluation as the number of moderately incongruent features increases when consumers consider purchasing the product in the distant future, whereas such an increase is not predicted for the near future scenario. I verify these effect in three experimental studies. Theoretical and managerial implications, and possible avenues of future research are also suggested.

The secondary market for life insurance policies in the United States market evolution and product valuation

In this work we discuss the secondary market for life insurance policies in the United States of America. First, we give an overview of the life settlement market: how it came into existence, its growth prospects and the ethical issues it arises. Secondly, we discuss the characteristics of the different life insurance products present in the market and describe how life settlements are originated. Life settlement transactions tend to be long and complex transactions that require the involvement of a number of parties. Also, a direct investment into life insurance policies is fraught with a number of practical issues and entails risks that are not directly related to longevity. This may reduce the efficiency of a direct investment in physical policies. For these reasons, a synthetic longevity market has evolved. The number of parties involved in a synthetic longevity transaction is typically smaller and the broker-dealer transferring the longevity exposure will be retaining most or all of the risks a physical investment entails. Finally, we describe the main methods used in the market to evaluate life settlement investments and the role of life expectancy providers.

Creative process in globally distributed teams: a study of new product development in Volvo

With the business environments no longer confined to geographical borders, the new wave of digital technologies has given organizations an enormous opportunity to bring together their distributed workforce and develop the ability to work together despite being apart (Prasad & Akhilesh, 2002). resupposing creativity to be a social process, the way that this phenomenon occurs when the configuration of the team is substantially modified will be questioned. Very little is known about the impact of interpersonal relationships in the creativity (Kurtzberg & Amabile, 2001). In order to analyse the ways in which the creative process may be developed, we ought to be taken into consideration the fact that participants are dealing with a quite an atypical situation. Firstly, in these cases socialization takes place amongst individuals belonging to a geographically dispersed workplace, where interpersonal relationships are mediated by the computer, and where trust must be developed among persons who have never met one another. Participants not only have multiple addresses and locations, but above all different nationalities, and different cultures, attitudes, thoughts, and working patterns, and languages. Therefore, the central research question of this thesis is as follows: “How does the creative process unfold in globally distributed teams?” With a qualitative approach, we used the case study of the Business Unit of Volvo 3P, an arm of Volvo Group. Throughout this research, we interviewed seven teams engaged in the development of a new product in the chassis and cab areas, for the brands Volvo and Renault Trucks, teams that were geographically distributed in Brazil, Sweden, France and India. Our research suggests that corporate values, alongside with intrinsic motivation and task which lay down the necessary foundations for the development of the creative process in GDT.

Teoria e prassi del product placement. Il caso dei film contemporanei per adolescenti (ITA/USA 2006-2010)

Through this research I have tried to demonstrate how the evolution of the newest marketing strategies - that work towards engaging relationships with consumers, thus building an emotional connection between the brand and the user- can be considered as a response to the evolution of young audiences and consumers. More specifically, I have analized product placement as a cultural and social phenomena above all, and not only as an economical one, thus demonstrating all the social and cultural practices that this tool implies. The approach I have chosen to do so, is historical-analytical, particularly focusing on the evolution of the society and of the consumer, especially for what teenagers (both as audiences and as consumers) are concerned.

The influence of career histories on team perfomance in new product development: a study of the video game industry

The purpose of this research is to contribute to the literature on organizational demography and new product development by investigating how diverse individual career histories impact team performance. Moreover we highlighted the importance of considering also the institutional context and the specific labour market arrangements in which a team is embedded, in order to interpret correctly the effect of career-related diversity measures on performance. The empirical setting of the study is the videogame industry, and the teams in charge of the development of new game titles. Video games development teams are the ideal setting to investigate the influence of career histories on team performance, since the development of videogames is performed by multidisciplinary teams composed by specialists with a wide variety of technical and artistic backgrounds, who execute a significant amounts of creative thinking. We investigate our research question both with quantitative methods and with a case study on the Japanese videogame industry: one of the most innovative in this sector. Our results show how career histories in terms of occupational diversity, prior functional diversity and prior product diversity, usually have a positive influence on team performance. However, when the moderating effect of the institutional setting is taken in to account, career diversity has different or even opposite effect on team performance, according to the specific national context in which a team operates.

Pyrolysis of peptides and proteins. Analytical study and environmental applications

Analytical pyrolysis was used to investigate the formation of diketopiperazines (DKPs) which are cyclic dipeptides formed from the thermal degradation of proteins. A quali/quantitative procedure was developed combining microscale flash pyrolysis at 500 °C with gas chromatography-mass spectrometry (GC-MS) of DKPs trapped onto an adsorbent phase. Polar DKPs were silylated prior to GC-MS. Particular attention was paid to the identification of proline (Pro) containing DKPs due to their greater facility of formation. The GC-MS characteristics of more than 80 original and silylated DKPs were collected from the pyrolysis of sixteen linear dipeptides and four model proteins (e.g. bovine serum albumin, BSA). The structure of a novel DKP, cyclo(pyroglutamic-Pro) was established by NMR and ESI-MS analysis, while the structures of other novel DKPs remained tentative. DKPs resulted rather specific markers of amino acid sequence in proteins, even though the thermal degradation of DKPs should be taken into account. Structural information of DKPs gathered from the pyrolysis of model compounds was employed to the identification of these compounds in the pyrolysate of proteinaceous samples, including intrinsecally unfolded protein (IUP). Analysis of the liquid fraction (bio-oil) obtained from the pyrolysis of microalgae Nannochloropsis gaditana, Scenedesmus spp with a bench scale reactor showed that DKPs constituted an important pool of nitrogen-containing compounds. Conversely, the level of DKPs was rather low in the bio-oil of Botryococcus braunii. The developed micropyrolysis procedure was applied in combination with thermogravimetry (TGA) and infrared spectroscopy (FT-IR) to investigate surface interaction between BSA and synthetic chrysotile. The results showed that the thermal behavior of BSA (e.g. DKPs formation) was affected by the different form of doped synthetic chrysotile. The typical DKPs evolved from collagen were quantified in the pyrolysates of archaeological bones from Vicenne Necropolis in order to evaluate their conservation status in combination with TGA, FTIR and XRD analysis.

Patent Strategies and R&D in Complex Product Industries

The study aims at providing a framework conceptualizing patenting activities under the condition of intellectual property rights fragmentation. Such a framework has to deal with the interrelated problems of technological complexity in the modern patent landscape. In that respect, ex-post licensing agreements have been incorporated into the analysis. More precisely, by consolidating the right to use patents required for commercialization of a product, private market solutions, such as cross-licensing agreements and patent pools help firms to overcome problems triggered by the intellectual property rights fragmentation. Thereby, private bargaining between parties as such cannot be isolated from the legal framework. A result of this analysis is that policies ignoring market solutions and only focusing on static gains can mitigate the dynamic efficiency gains as induced by the patent system. The evidence found in this thesis supports the opinion that legal reforms that aim to decrease the degree of patent protection or to lift it all together can hamper the functioning of the current system.

Development of an innovative pyrolysis plant for the production of secondary raw materials

This project was born with the aim of developing an environmentally and financially sustainable process to dispose of end-life tires. In this perspective was devised an innovative static bed batch pilot reactor where pyrolysis can be carried out on the whole tires in order to recover energy and materials and simultaneously save the energy costs of their shredding. The innovative plant is also able to guarantee a high safety of the process thanks to the presence of a hydraulic guard. The pilot plant was used to pyrolyze new and end-life tires at temperatures from 400 to 600°C with step of 50°C in presence of steam. The main objective of this research was to evaluate the influence of the maximum process temperature on yields and chemical-physics properties of pyrolysis products. In addition, in view of a scale-up of the plant in continuous mode, the influence of the nature of several different tires as well as the effects of the aging on the final products were studied. The same pilot plant was also used to carry out pyrolysis on polymeric matrix composites in order to obtain chemical feedstocks from the resin degradation together with the recovery of the reinforcement in the form of fibers. Carbon fibers reinforced composites ad fiberglass was treated in the 450-600°C range and the products was fully characterized. A second oxidative step was performed on the pyrolysis solid residue in order to obtain the fibers in a suitable condition for a subsequent re-impregnation in order to close the composite Life Cycle in a cradle-to-cradle approach. These investigations have demonstrated that steel wires, char, carbon and glass fibers recovered in the prototypal plant as solid residues can be a viable alternative to pristine materials, making use of them to obtain new products with a commercial added value.