Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

An Input-Process-Output Approach to Interorganizational Teams: The Influence of Work Group Diversity, Trust and Shared Leadership on Communication Network and Team Outputs.

The market’s challenges bring firms to collaborate with other organizations in order to create Joint Ventures, Alliances and Consortia that are defined as “Interorganizational Networks” (IONs) (Provan, Fish and Sydow; 2007). Some of these IONs are managed through a shared partecipant governance (Provan and Kenis, 2008): a team composed by entrepreneurs and/or directors of each firm of an ION. The research is focused on these kind of management teams and it is based on an input-process-output model: some input variables (work group’s diversity, intra-team's friendship network density) have a direct influence on the process (team identification, shared leadership, interorganizational trust, team trust and intra-team's communication network density), which influence some team outputs, individual innovation behaviors and team effectiveness (team performance, work group satisfaction and ION affective commitment). Data was collected on a sample of 101 entrepreneurs grouped in 28 ION’s government teams and the research hypotheses are tested trough the path analysis and the multilevel models. As expected trust in team and shared leadership are positively and directly related to team effectiveness while team identification and interorganizational trust are indirectly related to the team outputs. The friendship network density among the team’s members has got positive effects on the trust in team and on the communication network density, and also, through the communication network density it improves the level of the teammates ION affective commitment. The shared leadership and its effects on the team effectiveness are fostered from higher level of team identification and weakened from higher level of work group diversity, specifically gender diversity. Finally, the communication network density and shared leadership at the individual level are related to the frequency of individual innovative behaviors. The dissertation’s results give a wider and more precise indication about the management of interfirm network through “shared” form of governance.

A bayesian model for mixed responses and skew laten variable to measure HRQoL in children

The aim of the thesi is to formulate a suitable Item Response Theory (IRT) based model to measure HRQoL (as latent variable) using a mixed responses questionnaire and relaxing the hypothesis of normal distributed latent variable. The new model is a combination of two models already presented in literature, that is, a latent trait model for mixed responses and an IRT model for Skew Normal latent variable. It is developed in a Bayesian framework, a Markov chain Monte Carlo procedure is used to generate samples of the posterior distribution of the parameters of interest. The proposed model is test on a questionnaire composed by 5 discrete items and one continuous to measure HRQoL in children, the EQ-5D-Y questionnaire. A large sample of children collected in the schools was used. In comparison with a model for only discrete responses and a model for mixed responses and normal latent variable, the new model has better performances, in term of deviance information criterion (DIC), chain convergences times and precision of the estimates.

Sviluppo e validazione di indicatori di qualità dell’assistenza nell’ambito della salute mentale in Emilia-Romagna

In Italia, il processo di de-istituzionalizzazione e di implementazione di modelli di assistenza per la salute mentale sono caratterizzati da carenza di valutazione. In particolare, non sono state intraprese iniziative per monitorare le attività relative all’assistenza dei pazienti con disturbi psichiatrici. Pertanto, l’obiettivo della tesi è effettuare una valutazione comparativa dei percorsi di cura nell’ambito della salute mentale nei Dipartimenti di Salute Mentale e Dipendenze Patologiche della regione Emilia-Romagna utilizzando indicatori ottenuti dai flussi amministrativi correnti.. I dati necessari alla costruzione degli indicatori sono stati ottenuti attraverso un data linkage dei flussi amministrativi correnti regionali delle schede di dimissione ospedaliera, delle attività territoriali dei Centri di Salute Mentale e delle prescrizioni farmaceutiche, con riferimento all’anno 2010. Gli indicatori sono stati predisposti per tutti i pazienti con diagnosi principale psichiatrica e poi suddivisi per categoria diagnostica in base al ICD9-CM. . Il set di indicatori esaminato comprende i tassi di prevalenza trattata e di incidenza dei disturbi mentali, i tassi di ospedalizzazione, la ri-ospedalizzazione a 7 e 30 giorni dalla dimissione dai reparti psichiatrici, la continuità assistenziale ospedale-territorio, l’adesione ai trattamenti ed il consumo e appropriatezza prescrittiva di farmaci. Sono state rilevate alcune problematiche nella ricostruzione della continuità assistenziale ospedale-territorio ed alcuni limiti degli indicatori relativi alle prescrizioni dei farmaci. Il calcolo degli indicatori basato sui flussi amministrativi correnti si presenta fattibile, pur con i limiti legati alla qualità, completezza ed accuratezza dei dati presenti. L’implementazione di questi indicatori su larga scala (regionale e nazionale) e su base regolare può essere una opportunità per impostare un sistema di sorveglianza, monitoraggio e valutazione dell’assistenza psichiatrica nei DSM.

Production of bioactive peptides through sequencial action of Yarrowia lipolytica proteases and chemical glycation

This PhD thesis is aimed at studying the suitability of proteases realised by Yarrowia lipolytica to hydrolyse proteins of different origins available as industrial food by-products. Several strains of Y. lipolytica have been screened for the production of extracellular proteases by zymography. On the basis of the results some strains released only a protease having a MW of 37 kDa, which corresponds to the already reported acidic protease, while other produced prevalently or only a protease with a MW higher than 200 kDa. The proteases have been screened for their "cold attitude" on gelatin, gluten and skim milk. This property can be relevant from a biotechnological point of view in order to save energy consumption during industrial processes. Most of the strains used were endowed with proteolytic activity at 6 °C on all the three proteins. The proteolytic breakdown profiles of the proteins, detected at 27 °C, were different related to the specific strains of Y. lipolytica. The time course of the hydrolysis, tested on gelatin, affected the final bioactivities of the peptide mixtures produced. In particular, an increase in both the antioxidant and antimicrobial activities was detected when the protease of the strain Y. lipolytica 1IIYL4A was used. The final part of this work was focused on the improvement of the peptides bioactivities through a novel process based on the production of glycopeptides. Firstly, the main reaction parameters were optimized in a model system, secondly a more complex system, based on gluten hydrolysates, was taken into consideration to produce glycopeptides. The presence of the sugar moiety reduced the hydrophobicity of the glycopeptides, thus affecting the final antimicrobial activity which was significantly improved. The use of this procedure could be highly effective to modify peptides and can be employed to create innovative functional peptides using a mild temperature process.

La cooperazione giudiziaria in rete nello spazio di liberta', sicurezza e giustizia

L’oggetto del lavoro si concentra sull’analisi in chiave giuridica del modello di cooperazione in rete tra le autorità nazionali degli Stati membri nel quadro dello Spazio LSG, allo scopo di valutarne il contributo, le prospettive e il potenziale. La trattazione si suddivide in due parti, precedute da una breve premessa teorica incentrata sull’analisi della nozione di rete e la sua valenza giuridica. La prima parte ricostruisce il percorso di maturazione della cooperazione in rete, dando risalto tanto ai fattori di ordine congiunturale quanto ai fattori giuridici e d’ordine strutturale che sono alla base del processo di retificazione dei settori giustizia e sicurezza. In particolare, vengono elaborati taluni rilievi critici, concernenti l’operatività degli strumenti giuridici che attuano il principio di mutuo riconoscimento e di quelli che danno applicazione al principio di disponibilità delle informazioni. Ciò allo scopo di evidenziare gli ostacoli che, di frequente, impediscono il buon esito delle procedure di cooperazione e di comprendere le potenzialità e le criticità derivanti dall’utilizzo della rete rispetto alla concreta applicazione di tali procedure. La seconda parte si focalizza sull’analisi delle principali reti attive in materia di giustizia e sicurezza, con particolare attenzione ai rispettivi meccanismi di funzionamento. La trattazione si suddivide in due distinte sezioni che si concentrano sulle a) reti che operano a supporto dell’applicazione delle procedure di assistenza giudiziaria e degli strumenti di mutuo riconoscimento e sulle b) reti che operano nel settore della cooperazione informativa e agevolano lo scambio di informazioni operative e tecniche nelle azioni di prevenzione e lotta alla criminalità - specialmente nel settore della protezione dell’economia lecita. La trattazione si conclude con la ricostruzione delle caratteristiche di un modello di rete europea e del ruolo che questo esercita rispetto all’esercizio delle competenze dell’Unione Europea in materia di giustizia e sicurezza.

L'inclusione lavorativa tra accesso e partecipazione

La Convenzione delle Nazioni Unite sui Diritti delle Persone con Disabilità (UNCRPD) riconosce il diritto di tutte le persone al lavoro “gli Stati Parti adottano misure adeguate a garantire alle persone con disabilità, su base di uguaglianza con gli altri, l’accesso all’ambiente fisico, ai trasporti, all’informazione e alla comunicazione, compresi i sistemi e le tecnologie di informazione e comunicazione e ad altre attrezzature e servizi aperti o forniti al pubblico”(United Nation 2016 p.14). Nonostante i progressi (in ambito politico culturale) che si stanno compiendo in ambito internazionale in termini di pari opportunità e di inclusione, le persone in situazione di disabilità continuano a incontrare barriere che limitano la loro partecipazione attiva al mondo del lavoro. A partire da questo scenario, la ricerca si propone di indagare i bisogni (es. di accoglienza, di accesso al contesto fisico e digitale, di partecipazione nella vita dell’azienda ecc.) delle persone con disabilità e di sviluppare una applicazione digitale (web app), rivolta alle imprese, finalizzata a monitorare e a promuovere l'inclusione lavorativa. Ripercorrendo il modello di progettazione del design thinking e valorizzando un processo di ricerca basato su metodi misti (qualitativi e qualitativi) è stato ideato Job inclusion for all; un ambiente digitale fondato sull’adattamento di due strumenti di “metariflessione”: l’Index for inclusion job version e l’employment role mapping. Lo strumento digitale prototipato è stato testato e validato, durante l’ultimo anno di ricerca, da parte di una equipe multidisciplinare internazionale; tale processo ha consentito di raccogliere feedback (rispetto alla rilevanza e alla chiarezza degli item, rispetto ai punti di forza e di debolezza) che hanno consentito di migliorare e implementare la versione finale del prototipo di web app.

Valutazione delle politiche di sviluppo locale: una comparazione internazionale

Lo sviluppo locale rappresenta, non solo per gli economisti, un tema di analisi sempre più rilevante sia al livello istituzionale che al livello scientifico. La complessità degli aspetti inerenti lo sviluppo locale richiede il coinvolgimento di diverse discipline, in ambito economico, politico, sociale e ambientale e di tutti i livelli istituzionali. Parallelamente è cresciuta l’esigenza di processi valutativi coerenti e sistematici, basati su di un numero sempre maggiore di strumenti e metodologie di valutazione. Dall’orientamento della Commissione Europea emerge del resto con sempre maggiore evidenza il binomio fra politica di sviluppo locale e valutazione, che coinvolge i diversi livelli di governo. Il presente lavoro realizza un quadro delle politiche di sviluppo locale, partendo dal livello europeo fino ad arrivare al livello locale, ed una successiva analisi di metodologie e strumenti di valutazione consolidati e di frontiera. La considerazione della valutazione come strumento strategico per le politiche di sviluppo locale trova applicazione nella realizzazione di una analisi comparativa di due aree di montagna. Tali aree, identificate nell’Appennino Bolognese e nell’area montana della Contea di Brasov in Romania, pur collocate in paesi a diverso livello di sviluppo, risultano confrontabili, in termini di similitudini e criticità, al fine di trarre considerazioni di policy inerenti il disegno di adeguate politiche di riqualificazione, mettendo in luce l’importanza del processo valutativo e la necessità di contribuire a diffondere una vera e propria cultura della valutazione.

Multi-level models and infrastructures for simulating biological system development

The hierarchical organisation of biological systems plays a crucial role in the pattern formation of gene expression resulting from the morphogenetic processes, where autonomous internal dynamics of cells, as well as cell-to-cell interactions through membranes, are responsible for the emergent peculiar structures of the individual phenotype. Being able to reproduce the systems dynamics at different levels of such a hierarchy might be very useful for studying such a complex phenomenon of self-organisation. The idea is to model the phenomenon in terms of a large and dynamic network of compartments, where the interplay between inter-compartment and intra-compartment events determines the emergent behaviour resulting in the formation of spatial patterns. According to these premises the thesis proposes a review of the different approaches already developed in modelling developmental biology problems, as well as the main models and infrastructures available in literature for modelling biological systems, analysing their capabilities in tackling multi-compartment / multi-level models. The thesis then introduces a practical framework, MS-BioNET, for modelling and simulating these scenarios exploiting the potential of multi-level dynamics. This is based on (i) a computational model featuring networks of compartments and an enhanced model of chemical reaction addressing molecule transfer, (ii) a logic-oriented language to flexibly specify complex simulation scenarios, and (iii) a simulation engine based on the many-species/many-channels optimised version of Gillespie’s direct method. The thesis finally proposes the adoption of the agent-based model as an approach capable of capture multi-level dynamics. To overcome the problem of parameter tuning in the model, the simulators are supplied with a module for parameter optimisation. The task is defined as an optimisation problem over the parameter space in which the objective function to be minimised is the distance between the output of the simulator and a target one. The problem is tackled with a metaheuristic algorithm. As an example of application of the MS-BioNET framework and of the agent-based model, a model of the first stages of Drosophila Melanogaster development is realised. The model goal is to generate the early spatial pattern of gap gene expression. The correctness of the models is shown comparing the simulation results with real data of gene expression with spatial and temporal resolution, acquired in free on-line sources.

Advanced modelling of time domain electromagnetic data with updated hydrogeological interpretations

Several countries have acquired, over the past decades, large amounts of area covering Airborne Electromagnetic data. Contribution of airborne geophysics has dramatically increased for both groundwater resource mapping and management proving how those systems are appropriate for large-scale and efficient groundwater surveying. We start with processing and inversion of two AEM dataset from two different systems collected over the Spiritwood Valley Aquifer area, Manitoba, Canada respectively, the AeroTEM III (commissioned by the Geological Survey of Canada in 2010) and the “Full waveform VTEM” dataset, collected and tested over the same survey area, during the fall 2011. We demonstrate that in the presence of multiple datasets, either AEM and ground data, due processing, inversion, post-processing, data integration and data calibration is the proper approach capable of providing reliable and consistent resistivity models. Our approach can be of interest to many end users, ranging from Geological Surveys, Universities to Private Companies, which are often proprietary of large geophysical databases to be interpreted for geological and\or hydrogeological purposes. In this study we deeply investigate the role of integration of several complimentary types of geophysical data collected over the same survey area. We show that data integration can improve inversions, reduce ambiguity and deliver high resolution results. We further attempt to use the final, most reliable output resistivity models as a solid basis for building a knowledge-driven 3D geological voxel-based model. A voxel approach allows a quantitative understanding of the hydrogeological setting of the area, and it can be further used to estimate the aquifers volumes (i.e. potential amount of groundwater resources) as well as hydrogeological flow model prediction. In addition, we investigated the impact of an AEM dataset towards hydrogeological mapping and 3D hydrogeological modeling, comparing it to having only a ground based TEM dataset and\or to having only boreholes data.

The Perception of American Adolescent Culture Through the Dubbing and Fansubbing of a Selection of US Teen Series from 1990 to 2013

The present dissertation aims at analyzing the construction of American adolescent culture through teen-targeted television series and the shift in perception that occurs as a consequence of the translation process. In light of the recent changes in television production and consumption modes, largely caused by new technologies, this project explores the evolution of Italian audiences, focusing on fansubbing (freely distributed amateur subtitles made by fans for fan consumption) and social viewing (the re-aggregation of television consumption based on social networks and dedicated platforms, rather than on physical presence). These phenomena are symptoms of a sort of ‘viewership 2.0’ and of a new type of active viewing, which calls for a revision of traditional AVT strategies. Using a framework that combines television studies, new media studies, and fandom studies with an approach to AVT based on Descriptive Translation Studies (Toury 1995), this dissertation analyzes the non-Anglophone audience’s growing need to participation in the global dialogue and appropriation process based on US scheduling and informed by the new paradigm of convergence culture, transmedia storytelling, and affective economics (Jenkins 2006 and 2007), as well as the constraints intrinsic to multimodal translation and the different types of linguistic and cultural adaptation performed through dubbing (which tends to be more domesticating; Venuti 1995) and fansubbing (typically more foreignizing). The study analyzes a selection of episodes from six of the most popular teen television series between 1990 and 2013, which has been divided into three ages based on the different modes of television consumption: top-down, pre-Internet consumption (Beverly Hills, 90210, 1990 – 2000), emergence of audience participation (Buffy the Vampire Slayer, 1997 – 2003; Dawson’s Creek, 1998 – 2003), age of convergence and Viewership 2.0 (Gossip Girl, 2007 – 2012; Glee, 2009 – present; The Big Bang Theory, 2007 - present).

Epigenetic signature in persons with Down Syndrome

Persons affected by Down Syndrome show a heterogeneous phenotype that includes developmental defects and cognitive and haematological disorders. Premature accelerated aging and the consequent development of age associated diseases like Alzheimer Disease (AD) seem to be the cause of higher mortality late in life of DS persons. Down Syndrome is caused by the complete or partial trisomy of chromosome 21, but it is not clear if the molecular alterations of the disease are triggered by the specific functions of a limited number of genes on chromosome 21 or by the disruption of genetic homeostasis due the presence of a trisomic chromosome. As epigenomic studies can help to shed light on this issue, here we used the Infinium HumanMethilation450 BeadChip to analyse blood DNA methylation patterns of 29 persons affected by Down syndrome (DSP), using their healthy siblings (DSS) and mothers (DSM) as controls. In this way we obtained a family-based model that allowed us to monitor possible confounding effects on DNA methylation patterns deriving from genetic and environmental factors. We showed that defects in DNA methylation map in genes involved in developmental, neurological and haematological pathways. These genes are enriched on chromosome 21 but localize also in the rest of the genome, suggesting that the trisomy of specific genes on chromosome 21 induces a cascade of events that engages many genes on other chromosomes and results in a global alteration of genomic function. We also analysed the methylation status of three target regions localized at the promoter (Ribo) and at the 5’ sequences of 18S and 28S regions of the rDNA, identifying differently methylated CpG sites. In conclusion, we identified an epigenetic signature of Down Syndrome in blood cells that sustains a link between developmental defects and disease phenotype, including segmental premature aging.

Modelling biogeochemical cycles in forest ecosystems: a Bayesian approach

Forest models are tools for explaining and predicting the dynamics of forest ecosystems. They simulate forest behavior by integrating information on the underlying processes in trees, soil and atmosphere. Bayesian calibration is the application of probability theory to parameter estimation. It is a method, applicable to all models, that quantifies output uncertainty and identifies key parameters and variables. This study aims at testing the Bayesian procedure for calibration to different types of forest models, to evaluate their performances and the uncertainties associated with them. In particular,we aimed at 1) applying a Bayesian framework to calibrate forest models and test their performances in different biomes and different environmental conditions, 2) identifying and solve structure-related issues in simple models, and 3) identifying the advantages of additional information made available when calibrating forest models with a Bayesian approach. We applied the Bayesian framework to calibrate the Prelued model on eight Italian eddy-covariance sites in Chapter 2. The ability of Prelued to reproduce the estimated Gross Primary Productivity (GPP) was tested over contrasting natural vegetation types that represented a wide range of climatic and environmental conditions. The issues related to Prelued's multiplicative structure were the main topic of Chapter 3: several different MCMC-based procedures were applied within a Bayesian framework to calibrate the model, and their performances were compared. A more complex model was applied in Chapter 4, focusing on the application of the physiology-based model HYDRALL to the forest ecosystem of Lavarone (IT) to evaluate the importance of additional information in the calibration procedure and their impact on model performances, model uncertainties, and parameter estimation. Overall, the Bayesian technique proved to be an excellent and versatile tool to successfully calibrate forest models of different structure and complexity, on different kind and number of variables and with a different number of parameters involved.