Rimesse e sviluppo locale nel sistema migratorio del Golfo Persico

The thesis concerns, from an economic and institutional point of view, the migration process in connection with development issues, focusing on the Middle East and North Africa region. Adopting a south-south perspective of migration flows, which is focusing on migration from the Maghreb and Mashreq towards the GCC, the research focuses on the linkage between migration and local development (LED), considering the economic implication that temporary migration flows (trough physical and human capital accumulation) have for the labour exporting countries of the region. Since south-south migration flows are both temporary and skilled, the research points out that return migrants from the GCC can have a significant impact for the growth of recipient countries, as they transfer capital through remittances on regular basis and, once back, they can use human capital acquired abroad to promote economic initiatives. Starting from the descriptive analysis on international migration flows (from an historical to a systemic point of view), and focusing on the patterns of people movements in the Gulf Migration System and on the role remittances have in the region as a strategy for both household survival and local development, the research considers the economics of migrant remittances from a micro and macro perspective and the main direct and indirect effects that remittances have on the local communities. The review of the economic literature on international remittances and on local development shows how migration is an alternative strategy of financing local economic development (LED) especially for low-middle income countries (among them the Maghreb countries). The linkage between return migration, remittances, human capital formation and the promotion of local development in the Egyptian case is the focus of the empirical investigation.

Dalla città alla casa, dalla casa alla città: la mutevole ricerca di un Piano per il ben-essere urbano

La ricerca si propone di definire le linee guida per la stesura di un Piano che si occupi di qualità della vita e di benessere. Il richiamo alla qualità e al benessere è positivamente innovativo, in quanto impone agli organi decisionali di sintonizzarsi con la soggettività attiva dei cittadini e, contemporaneamente, rende evidente la necessità di un approccio più ampio e trasversale al tema della città e di una più stretta relazione dei tecnici/esperti con i responsabili degli organismi politicoamministrativi. La ricerca vuole indagare i limiti dell’urbanistica moderna di fronte alla complessità di bisogni e di nuove necessità espresse dalle popolazioni urbane contemporanee. La domanda dei servizi è notevolmente cambiata rispetto a quella degli anni Sessanta, oltre che sul piano quantitativo anche e soprattutto sul piano qualitativo, a causa degli intervenuti cambiamenti sociali che hanno trasformato la città moderna non solo dal punto di vista strutturale ma anche dal punto di vista culturale: l’intermittenza della cittadinanza, per cui le città sono sempre più vissute e godute da cittadini del mondo (turisti e/o visitatori, temporaneamente presenti) e da cittadini diffusi (suburbani, provinciali, metropolitani); la radicale trasformazione della struttura familiare, per cui la famiglia-tipo costituita da una coppia con figli, solido riferimento per l’economia e la politica, è oggi minoritaria; l’irregolarità e flessibilità dei calendari, delle agende e dei ritmi di vita della popolazione attiva; la mobilità sociale, per cui gli individui hanno traiettorie di vita e pratiche quotidiane meno determinate dalle loro origini sociali di quanto avveniva nel passato; l’elevazione del livello di istruzione e quindi l’incremento della domanda di cultura; la crescita della popolazione anziana e la forte individualizzazione sociale hanno generato una domanda di città espressa dalla gente estremamente variegata ed eterogenea, frammentata e volatile, e per alcuni aspetti assolutamente nuova. Accanto a vecchie e consolidate richieste – la città efficiente, funzionale, produttiva, accessibile a tutti – sorgono nuove domande, ideali e bisogni che hanno come oggetto la bellezza, la varietà, la fruibilità, la sicurezza, la capacità di stupire e divertire, la sostenibilità, la ricerca di nuove identità, domande che esprimono il desiderio di vivere e di godere la città, di stare bene in città, domande che non possono essere più soddisfatte attraverso un’idea di welfare semplicemente basata sull’istruzione, la sanità, il sistema pensionistico e l’assistenza sociale. La città moderna ovvero l’idea moderna della città, organizzata solo sui concetti di ordine, regolarità, pulizia, uguaglianza e buon governo, è stata consegnata alla storia passata trasformandosi ora in qualcosa di assai diverso che facciamo fatica a rappresentare, a descrivere, a raccontare. La città contemporanea può essere rappresentata in molteplici modi, sia dal punto di vista urbanistico che dal punto di vista sociale: nella letteratura recente è evidente la difficoltà di definire e di racchiudere entro limiti certi l’oggetto “città” e la mancanza di un convincimento forte nell’interpretazione delle trasformazioni politiche, economiche e sociali che hanno investito la società e il mondo nel secolo scorso. La città contemporanea, al di là degli ambiti amministrativi, delle espansioni territoriali e degli assetti urbanistici, delle infrastrutture, della tecnologia, del funzionalismo e dei mercati globali, è anche luogo delle relazioni umane, rappresentazione dei rapporti tra gli individui e dello spazio urbano in cui queste relazioni si muovono. La città è sia concentrazione fisica di persone e di edifici, ma anche varietà di usi e di gruppi, densità di rapporti sociali; è il luogo in cui avvengono i processi di coesione o di esclusione sociale, luogo delle norme culturali che regolano i comportamenti, dell’identità che si esprime materialmente e simbolicamente nello spazio pubblico della vita cittadina. Per studiare la città contemporanea è necessario utilizzare un approccio nuovo, fatto di contaminazioni e saperi trasversali forniti da altre discipline, come la sociologia e le scienze umane, che pure contribuiscono a costruire l’immagine comunemente percepita della città e del territorio, del paesaggio e dell’ambiente. La rappresentazione del sociale urbano varia in base all’idea di cosa è, in un dato momento storico e in un dato contesto, una situazione di benessere delle persone. L’urbanistica moderna mirava al massimo benessere del singolo e della collettività e a modellarsi sulle “effettive necessità delle persone”: nei vecchi manuali di urbanistica compare come appendice al piano regolatore il “Piano dei servizi”, che comprende i servizi distribuiti sul territorio circostante, una sorta di “piano regolatore sociale”, per evitare quartieri separati per fasce di popolazione o per classi. Nella città contemporanea la globalizzazione, le nuove forme di marginalizzazione e di esclusione, l’avvento della cosiddetta “new economy”, la ridefinizione della base produttiva e del mercato del lavoro urbani sono espressione di una complessità sociale che può essere definita sulla base delle transazioni e gli scambi simbolici piuttosto che sui processi di industrializzazione e di modernizzazione verso cui era orientata la città storica, definita moderna. Tutto ciò costituisce quel complesso di questioni che attualmente viene definito “nuovo welfare”, in contrapposizione a quello essenzialmente basato sull’istruzione, sulla sanità, sul sistema pensionistico e sull’assistenza sociale. La ricerca ha quindi analizzato gli strumenti tradizionali della pianificazione e programmazione territoriale, nella loro dimensione operativa e istituzionale: la destinazione principale di tali strumenti consiste nella classificazione e nella sistemazione dei servizi e dei contenitori urbanistici. E’ chiaro, tuttavia, che per poter rispondere alla molteplice complessità di domande, bisogni e desideri espressi dalla società contemporanea le dotazioni effettive per “fare città” devono necessariamente superare i concetti di “standard” e di “zonizzazione”, che risultano essere troppo rigidi e quindi incapaci di adattarsi all’evoluzione di una domanda crescente di qualità e di servizi e allo stesso tempo inadeguati nella gestione del rapporto tra lo spazio domestico e lo spazio collettivo. In questo senso è rilevante il rapporto tra le tipologie abitative e la morfologia urbana e quindi anche l’ambiente intorno alla casa, che stabilisce il rapporto “dalla casa alla città”, perché è in questa dualità che si definisce il rapporto tra spazi privati e spazi pubblici e si contestualizzano i temi della strada, dei negozi, dei luoghi di incontro, degli accessi. Dopo la convergenza dalla scala urbana alla scala edilizia si passa quindi dalla scala edilizia a quella urbana, dal momento che il criterio del benessere attraversa le diverse scale dello spazio abitabile. Non solo, nei sistemi territoriali in cui si è raggiunto un benessere diffuso ed un alto livello di sviluppo economico è emersa la consapevolezza che il concetto stesso di benessere sia non più legato esclusivamente alla capacità di reddito collettiva e/o individuale: oggi la qualità della vita si misura in termini di qualità ambientale e sociale. Ecco dunque la necessità di uno strumento di conoscenza della città contemporanea, da allegare al Piano, in cui vengano definiti i criteri da osservare nella progettazione dello spazio urbano al fine di determinare la qualità e il benessere dell’ambiente costruito, inteso come benessere generalizzato, nel suo significato di “qualità dello star bene”. E’ evidente che per raggiungere tale livello di qualità e benessere è necessario provvedere al soddisfacimento da una parte degli aspetti macroscopici del funzionamento sociale e del tenore di vita attraverso gli indicatori di reddito, occupazione, povertà, criminalità, abitazione, istruzione, etc.; dall’altra dei bisogni primari, elementari e di base, e di quelli secondari, culturali e quindi mutevoli, trapassando dal welfare state allo star bene o well being personale, alla wellness in senso olistico, tutte espressioni di un desiderio di bellezza mentale e fisica e di un nuovo rapporto del corpo con l’ambiente, quindi manifestazione concreta di un’esigenza di ben-essere individuale e collettivo. Ed è questa esigenza, nuova e difficile, che crea la diffusa sensazione dell’inizio di una nuova stagione urbana, molto più di quanto facciano pensare le stesse modifiche fisiche della città.

Studio e sviluppo di un motore a 2 tempi diesel veloce di nuova concezione per applicazioni automobilistiche

The Department of Mechanical and Civil Engineering (DIMeC) of the University of Modena and Reggio Emilia is developing a new type of small capacity HSDI 2-Stroke Diesel engine (called HSD2), featuring a specifically designed combustion system, aimed to reduce weight, size and manufacturing costs, and improving pollutant emissions at partial load. The present work is focused on the analysis of the combustion and the scavenging process, investigated by means of a version of the KIVA-3V code customized by the University of Chalmers and modified by DIMeC. The customization of the KIVA-3V code includes a detailed combustion chemistry approach, coupled with a comprehensive oxidation mechanism for diesel oil surrogate and the modeling of turbulence/chemistry interaction through the PaSR (Partially Stirred Reactor) model. A four stroke automobile Diesel engine featuring a very close bore size is taken as a reference, for both the numerical models calibration and for a comparison with the 2-Stroke engine. Analysis is carried out trough a comparison between HSD2 and FIAT 1300 MultiJet in several operating conditions, at full and partial load. Such a comparison clearly demonstrates the effectiveness of the two stroke concept in terms of emissions reduction and high power density. However, HSD2 is still a virtual engine, and experimental results are needed to assume the reliability of numerical results.

Mechanisms of cell senescence: p21 and DNA damage response in aging and longevity

Theory of aging postulates that aging is a remodeling process where the body of survivors progressively adapts to internal and external damaging agents they are exposed to during several decades. Thus , stress response and adaptation mechanisms play a fundamental role in the aging process where the capability of adaptating effects, certainly, also is related the lifespan of each individual. A key gene linking aging to stress response is indeed p21, an induction of cyclin-dependent kinase inhibitor which triggers cell growth arrest associated with senescence and damage response and notably is involved in the up-regulation of multiple genes that have been associated with senescence or implicated in age-related . This PhD thesis project that has been performed in collaboration with the Roninson Lab at Ordway Research Institute in Albany, NY had two main aims: -the testing the hypothesis that p21 polymorphisms are involved in longevity -Evaluating age-associated differences in gene expression and transcriptional response to p21 and DNA damage In the first project, trough PCR-sequencing and Sequenom strategies, we we found out that there are about 30 polymorphic variants in the p21 gene. In addition, we found an haplotpype located in -5kb region of the p21 promoter whose frequency is ~ 2 fold higher in centenarians than in the general population (Large-scale analysis of haplotype frequencies is currently in progress). Functional studies I carried out on the promoter highilighted that the ―centenarian‖ haplotype doesn’t affect the basal p21 promoter activity or its response to p53. However, there are many other possible physiological conditions in which the centenarian allele of the p21 promoter may potentially show a different response (IL6, IFN,progesterone, vitamin E, Vitamin D etc). In the second part, project #2, trough Microarrays we seeked to evaluate the differences in gene expression between centenarians, elderly, young in dermal fibroblast cultures and their response to p21 and DNA damage. Microarray analysis of gene expression in dermal fibroblast cultures of individuals of different ages yielded a tentative "centenarian signature". A subset of genes that were up- or downregulated in centenarians showed the same response to ectopic expression of p21, yielding a putative "p21-centenarian" signature. Trough RQ-PCR (as well Microarrays studies whose analysis is in progress) we tested the DNA damage response of the p21-centenarian signature genes showing a correlation stress/aging in additional sets of young and old samples treated with p21-inducing drug doxorubicin thus finding for a subset of of them , a response to stress age-related.

Crustal heterogeneities and complexities of fault processes

In this work we study the relation between crustal heterogeneities and complexities in fault processes. The first kind of heterogeneity considered involves the concept of asperity. The presence of an asperity in the hypocentral region of the M = 6.5 earthquake of June 17-th, 2000 in the South Iceland Seismic Zone was invoked to explain the change of seismicity pattern before and after the mainshock: in particular, the spatial distribution of foreshock epicentres trends NW while the strike of the main fault is N 7◦ E and aftershocks trend accordingly; the foreshock depths were typically deeper than average aftershock depths. A model is devised which simulates the presence of an asperity in terms of a spherical inclusion, within a softer elastic medium in a transform domain with a deviatoric stress field imposed at remote distances (compressive NE − SW, tensile NW − SE). An isotropic compressive stress component is induced outside the asperity, in the direction of the compressive stress axis, and a tensile component in the direction of the tensile axis; as a consequence, fluid flow is inhibited in the compressive quadrants while it is favoured in tensile quadrants. Within the asperity the isotropic stress vanishes but the deviatoric stress increases substantially, without any significant change in the principal stress directions. Hydrofracture processes in the tensile quadrants and viscoelastic relaxation at depth may contribute to lower the effective rigidity of the medium surrounding the asperity. According to the present model, foreshocks may be interpreted as induced, close to the brittle-ductile transition, by high pressure fluids migrating upwards within the tensile quadrants; this process increases the deviatoric stress within the asperity which eventually fails, becoming the hypocenter of the mainshock, on the optimally oriented fault plane. In the second part of our work we study the complexities induced in fault processes by the layered structure of the crust. In the first model proposed we study the case in which fault bending takes place in a shallow layer. The problem can be addressed in terms of a deep vertical planar crack, interacting with a shallower inclined planar crack. An asymptotic study of the singular behaviour of the dislocation density at the interface reveals that the density distribution has an algebraic singularity at the interface of degree ω between -1 and 0, depending on the dip angle of the upper crack section and on the rigidity contrast between the two media. From the welded boundary condition at the interface between medium 1 and 2, a stress drop discontinuity condition is obtained which can be fulfilled if the stress drop in the upper medium is lower than required for a planar trough-going surface: as a corollary, a vertically dipping strike-slip fault at depth may cross the interface with a sedimentary layer, provided that the shallower section is suitably inclined (fault "refraction"); this results has important implications for our understanding of the complexity of the fault system in the SISZ; in particular, we may understand the observed offset of secondary surface fractures with respect to the strike direction of the seismic fault. The results of this model also suggest that further fractures can develop in the opposite quadrant and so a second model describing fault branching in the upper layer is proposed. As the previous model, this model can be applied only when the stress drop in the shallow layer is lower than the value prescribed for a vertical planar crack surface. Alternative solutions must be considered if the stress drop in the upper layer is higher than in the other layer, which may be the case when anelastic processes relax deviatoric stress in layer 2. In such a case one through-going crack cannot fulfil the welded boundary conditions and unwelding of the interface may take place. We have solved this problem within the theory of fracture mechanics, employing the boundary element method. The fault terminates against the interface in a T-shaped configuration, whose segments interact among each other: the lateral extent of the unwelded surface can be computed in terms of the main fault parameters and the stress field resulting in the shallower layer can be modelled. A wide stripe of high and nearly uniform shear stress develops above the unwelded surface, whose width is controlled by the lateral extension of unwelding. Secondary shear fractures may then open within this stripe, according to the Coulomb failure criterion, and the depth of open fractures opening in mixed mode may be computed and compared with the well studied fault complexities observed in the field. In absence of the T-shaped decollement structure, stress concentration above the seismic fault would be difficult to reconcile with observations, being much higher and narrower.

La figure de Méduse. Réécritures ovidiennes entre XVIe et XVIIe siècle

Starting from an original assumption that Ovid is one of the most influential and studied European mythographers from ancient times till at least the end of the XVII century, my research is about rediscovering Medusa's myth which has been brought to us from Metamorphosis during the period of time between the mid XVI and the last years of the XVII century. The main thread that leads the research trough English, French, Spanish and Italian Literatures gets particularly clarified in the crucial crux that binds the image of Gorgon, the protector of hight mysteries, tightly correlated to the goddess of knowledge, Minerva, and the attraction/dismay for knowing so far considered inaccessible but now perceived as possible (so more attractive than before) thanks to the scientific and geographic discoveries of the Renaissance.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Le strategie di internazionalizzazione delle imprese distrettuali: un'analisi comparata di tre diversi sistemi locali di produzione in Emilia Romagna

Since the Nineties, the process of globalization has caused a sharp increase in the real and financial integration of the worldwide economy, reducing the obstacles to international trade and minimizing the cost of transaction. The entrance of foreign firms in the domestic market has deeply modified the competitive situation of Italian enterprises, which have been forced to change their strategies in order to cope with those of the new competitors. In this scenario, internationalization is no longer one of the different strategic options available for the firm, but it becomes a forced choice to maintain or acquire a competitive advantage sustainable over time. Internationalization strategies of SMEs, however, are hindered by the shortage of financial resources and entrepreneurial skills, therefore this kind of firms tends toward light forms of foreign expansion, like export and subcontracting. Despite this, many studies have demonstrated that the district localisation increases the firms’ productivity and innovative capacity, so their competiveness both at a domestic and international level. The majority of these empirical contributions has focused mainly on the analysis of commercial flows, confirming that district enterprises reach a superior international performance compared to their external competitors. On the contrary, only few works have tried to evaluate the existence of a district effect on the firms’ ability to invest abroad, but the obtained results are not straightforward. One of the reason of these conclusions is that the phenomena has been analysed without taking into account the differences existing between districts in terms of enterprises’ dimension, diffusion of industrial groups and, above all, the sector of productive specialization, because the technological content of production could improve the innovativeness of district firms, allowing them to adopt advanced forms of internationalisation as foreign direct investments (FDI). The aim of the thesis is to further investigate the district effect on internationalisation, trough an econometric analysis of the international strategies carried out by firms localised in three different local system of production characterised by different technological specialization.

Spatial and temporal variability and ecological processes in the epibenthic assemblages of the northern Adriatic Sea

Several coralligenous reefs occur in the soft bottoms of the northern Adriatic continental shelf. Mediterranean coralligenous habitats are characterised by high species diversity and are intrinsically valuable for their biological diversity and for the ecological processes they support. The conservation and management of these habitats require quantifying spatial and temporal variability of their benthic assemblages. This PhD thesis aims to give a relevant contribution to the knowledge of the structure and dynamics of the epibenthic assemblages on the coralligenous subtidal reefs occurring in the northern Adriatic Sea. The epibenthic assemblages showed a spatial variation larger compared to temporal changes, with a temporal persistence of reef-forming organisms. Assemblages spatial heterogeneity has been related to morphological features and geographical location of the reefs, together with variation in the hydrological conditions. Manipulative experiments help to understand the ecological processes structuring the benthic assemblages and maintaining their diversity. In this regards a short and long term experiment on colonization patterns of artificial substrata over a 3-year period has been performed in three reefs, corresponding to the three main types of assemblages detected in the previous study. The first colonisers, largely depending by the different larval supply, played a key role in determining the heterogeneity of the assemblages in the early stage of colonisation. Lateral invasion, from the surrounding assemblages, was the driver in structuring the mature assemblages. These complex colonisation dynamics explained the high heterogeneity of the assemblages dwelling on the northern Adriatic biogenic reefs. The buildup of these coralligenous reefs mainly depends by the bioconstruction-erosion processes that has been analysed through a field experiment. Bioconstruction, largely due to serpulid polychaetes, prevailed on erosion processes and occurred at similar rates in all sites. Similarly, the total energy contents in the benthic communities do not differ among sites, despite being provided by different species. Therefore, we can hypothesise that both bioconstruction processes and energetic storage may be limited by the availability of resources. Finally the major contribution of the zoobenthos compared to the phytobenthos to the total energetic content of assemblages suggests that the energy flow in these benthic habitats is primarily supported by planktonic food web trough the filter feeding invertebrates.

Abiotic and prebiotic phosphorus chemistry

The chief obstacle to understand the metabolic origin of life or RNA-based life is to identify a plausible mechanism for overcoming the clutter wrought by abiotic chemistry. Probably trough simple abiotic and then prebiotic reactions we could arrive to simple pre-RNA molecules. Here we report a possible preibiotic synthesis for heterocyclic compounds, and a self-assembling process of adenosine phosphates a constituent of RNA. In these processes we use a simple and prebiotic phosphorus cyclic compounds, as P4O10 and its derivatives. The processes are driven by the formation of hypercoordinated species that activate the processes by a factor of 106-8.

Numerical optimization,modeling and system evaluation of a thermophotovoltaic hybrid panel

Photovoltaic (PV) solar panels generally produce electricity in the 6% to 16% efficiency range, the rest being dissipated in thermal losses. To recover this amount, hybrid photovoltaic thermal systems (PVT) have been devised. These are devices that simultaneously convert solar energy into electricity and heat. It is thus interesting to study the PVT system globally from different point of views in order to evaluate advantages and disadvantages of this technology and its possible uses. In particular in Chapter II, the development of the PVT absorber numerical optimization by a genetic algorithm has been carried out analyzing different internal channel profiles in order to find a right compromise between performance and technical and economical feasibility. Therefore in Chapter III ,thanks to a mobile structure built into the university lab, it has been compared experimentally electrical and thermal output power from PVT panels with separated photovoltaic and solar thermal productions. Collecting a lot of experimental data based on different seasonal conditions (ambient temperature,irradiation, wind...),the aim of this mobile structure has been to evaluate average both thermal and electrical increasing and decreasing efficiency values obtained respect to separate productions through the year. In Chapter IV , new PVT and solar thermal equation based models in steady state conditions have been developed by software Dymola that uses Modelica language. This permits ,in a simplified way respect to previous system modelling softwares, to model and evaluate different concepts about PVT panel regarding its structure before prototyping and measuring it. Chapter V concerns instead the definition of PVT boundary conditions into a HVAC system . This was made trough year simulations by software Polysun in order to finally assess the best solar assisted integrated structure thanks to F_save(solar saving energy)factor. Finally, Chapter VI presents the conclusion and the perspectives of this PhD work.

Una grande narrazione del capitalismo: potere e scienze sociali nel pensiero politico di Daniel Bell

Questa tesi punta a ricostruire il pensiero politico di Bell tra il secondo dopoguerra e la metà degli anni Settanta. In tale arco cronologico, la riflessione politica di Bell si profila, per usare una formula di Jean-François Lyotard, come una «grande narrazione» del capitalismo. Nel complesso, cioè, l’opera di Bell appare come una storia sociologica del capitalismo, che nella fine delle ideologie registra l’apogeo del fordismo e, in seguito, ne mette in luce le trasformazioni in senso post-industriale, indagando le ricadute che tali mutamenti implicano sul piano dei rapporti di potere e della legittimazione del sistema. Nell’ottica di Bell, pertanto, il capitalismo non costituisce soltanto un sistema economico, ma la forma specifica attraverso cui si dispiega la società nel suo complesso, attivando una serie di rapporti di potere mediante i quali gli individui vengono coordinati e subordinati. Una siffatta concezione del capitalismo agisce immediatamente la questione del potere e solleva un interrogativo a esso connesso: «che cosa tiene insieme una società?». Una domanda che attraversa la traiettoria intellettuale di Bell e, sia pure declinata mediante una terminologia sociologica, riflette in realtà l’ambizione delle scienze sociali di farsi teoria politica. Esse si presentano quindi come teoria politica della modernità, nella misura in cui distinguono il potere sociale dal potere politico e, al tempo stesso, instaurano tra i due poli una tensione dialettica produttiva. Mettendo a fuoco la concettualizzazione del potere nell’opera di Bell si analizzeranno le mutazioni nel rapporto tra Stato e società negli Stati Uniti durante la Golden Age del capitalismo. In particolare, si metterà in luce nella grande narrazione di Bell l’ascesa e il declino di un ordine istituzionale che, alla metà degli anni Settanta, appare percorso da molteplici tensioni politiche e sociali che preannunciano l’avvento dell’età globale e il bisogno di una nuova “scala” di governo.

An Input-Process-Output Approach to Interorganizational Teams: The Influence of Work Group Diversity, Trust and Shared Leadership on Communication Network and Team Outputs.

The market’s challenges bring firms to collaborate with other organizations in order to create Joint Ventures, Alliances and Consortia that are defined as “Interorganizational Networks” (IONs) (Provan, Fish and Sydow; 2007). Some of these IONs are managed through a shared partecipant governance (Provan and Kenis, 2008): a team composed by entrepreneurs and/or directors of each firm of an ION. The research is focused on these kind of management teams and it is based on an input-process-output model: some input variables (work group’s diversity, intra-team's friendship network density) have a direct influence on the process (team identification, shared leadership, interorganizational trust, team trust and intra-team's communication network density), which influence some team outputs, individual innovation behaviors and team effectiveness (team performance, work group satisfaction and ION affective commitment). Data was collected on a sample of 101 entrepreneurs grouped in 28 ION’s government teams and the research hypotheses are tested trough the path analysis and the multilevel models. As expected trust in team and shared leadership are positively and directly related to team effectiveness while team identification and interorganizational trust are indirectly related to the team outputs. The friendship network density among the team’s members has got positive effects on the trust in team and on the communication network density, and also, through the communication network density it improves the level of the teammates ION affective commitment. The shared leadership and its effects on the team effectiveness are fostered from higher level of team identification and weakened from higher level of work group diversity, specifically gender diversity. Finally, the communication network density and shared leadership at the individual level are related to the frequency of individual innovative behaviors. The dissertation’s results give a wider and more precise indication about the management of interfirm network through “shared” form of governance.

Media activism on and off line by Italian adolescents and young adults

From several researchers it appears that Italian adolescents and young people are grown up with commercial television which is accused to contain too much violence, sex, reality shows, advertising, cartoons which are watched from 1 to 4 hours daily. Adolescents are also great users of mobile phones and spend a lot of time to use it. Their academic results are below the average of Ocse States. However the widespread use of communication technology and social networks display also another side of adolescents who engage in media activism and political movement such as Ammazzateci tutti!, Indymedia, Movimento 5 Stelle, Movimento No Tav. In which way does the world economic crisis -with the specific problems of Italy as the cutting founds for school, academic research and welfare, the corruption of political class, mafia and camorra organisation induce a reaction in our adolescents and young people? Several researches inform us about their use of internet in terms of spending time but, more important, how internet, and the web 2.0, could be an instrument for their reaction? What do they do online? How they do it? Which is the meaning of their presence online? And, has their online activity a continuity offline? The research aims are: 1. Trough a participant observation of Social Network profiles opened by 10 young active citizens, I would seek to understand which kind of social or political activities they engage in online as individuals and which is the meaning of their presence online. 2. To observe and understand if adolescents and young people have a continuity of their socio-political engagement online in offline activities and which kind of experiences it is. 3. Try to comprehend which was (or which were) the significant, learning experiences that convinced them about the potential of the web as tool for their activism.

Valutazione ambientale di tecnologie di bonifica per acquiferi contaminati attraverso la metodologia LCA

La bonifica di acquiferi contaminati è una pratica che oggi dispone di diverse soluzioni a livello tecnologico, caratterizzate tuttavia da costi (ambientali ed economici) e problematiche tecniche di entità tale da rendere in alcuni casi poco conveniente la realizzazione dell’intervento stesso. Per questo motivo sempre maggiore interesse viene rivolto nell’ambito della ricerca alle tecnologie di bioremediation, ovvero sistemi in cui la degradazione degli inquinanti avviene ad opera di microorganismi e batteri opportunamente selezionati e coltivati. L’impiego di queste tecniche consente un minor utilizzo di risorse ed apparati tecnologici per il raggiungimento degli obiettivi di bonifica rispetto ai sistemi tradizionali. Il lavoro di ricerca presentato in questa tesi ha l’obiettivo di fornire, tramite l’utilizzo della metodologia LCA, una valutazione della performance ambientale di una tecnologia di bonifica innovativa (BEARD) e due tecnologie largamente usate nel settore, una di tipo passivo (Permeable Reactive Barrier) ed una di tipo attivo (Pump and Treat con Carboni Attivi).