Studio delle proprietà oncotiche e non incotiche dell'albumina nel paziente con cirrosi epatica e ascite

L’albumina umana (HA) è usata per le sue proprietà oncotiche per ricostituire il volume circolante in pazienti critici e nella cirrosi epatica avanzata. Tuttavia, l’albumina non è solo semplice espansore plasmatico, ma è provvista anche di proprietà non oncotiche, quali, la capacità di legare e trasportare molecole insolubili in acqua, come metalli e farmaci, il suo potere antiossidante e di detossificazione di sostanze sia endogene che esogene. Il nostro studio, è stato progettato da un lato per dimostrare che il trattamento in cronico con albumina umana nei pazienti cirrotici con ascite è in grado di ridurre l’incidenza di ascite refrattaria, delle complicanze legate all’uso dei diuretici e la ricorrenza delle ospedalizzazioni (studio randomizzato), dall’altro per determinare se le alterazioni delle proprietà non oncotiche dell’albumina, possono rappresentare degli indicatori di un aumentato rischio di complicanze cliniche e di una prognosi sfavorevole di questi pazienti (studio di coorte). METODI Studio multicentrico, prospettico, randomizzato, in 440 pts cirrotici con ascite: due bracci di trattamento: t. medica standard vs t. medica standard + albumina; Studio di coorte con 110 cirrotici vs 50 individui sani, valutati mediante -analisi proteomica per individuare con le modifiche post-trascrizionali; - Cobalt Binding Albumina (ACB) per quantificare la quota di albumina modificata dall’ischemia e IMA-Ratio. RISULTATI Studio randomizzato: non è possibile trarre conclusioni, ma emerge un dato incoraggiante, cioè i pazienti del braccio standard hanno una maggiore tendenza a chiudere lo studio per tre paracentesi / mese; Studio Coorte:-IMA e IMA-R sono aumentati in cirrosi, ma non associate a complicanze della cirrosi, l'infezione batterica è associata ad un aumento IMA e IMA-R in cirrosi. CONCLUSIONE: Lo studio randomizzato è in corso ma i dati preliminari sono incoraggianti. Lo studio coorte, ha dimostrato che la cirrosi è associata da alterazioni post-trascrizionali che coinvolgono il N-terminale ed i siti di legame Cys-34.

Efficient ultrasonic signal processing techniques for aided medical diagnostics

Ultrasound imaging is widely used in medical diagnostics as it is the fastest, least invasive, and least expensive imaging modality. However, ultrasound images are intrinsically difficult to be interpreted. In this scenario, Computer Aided Detection (CAD) systems can be used to support physicians during diagnosis providing them a second opinion. This thesis discusses efficient ultrasound processing techniques for computer aided medical diagnostics, focusing on two major topics: (i) Ultrasound Tissue Characterization (UTC), aimed at characterizing and differentiating between healthy and diseased tissue; (ii) Ultrasound Image Segmentation (UIS), aimed at detecting the boundaries of anatomical structures to automatically measure organ dimensions and compute clinically relevant functional indices. Research on UTC produced a CAD tool for Prostate Cancer detection to improve the biopsy protocol. In particular, this thesis contributes with: (i) the development of a robust classification system; (ii) the exploitation of parallel computing on GPU for real-time performance; (iii) the introduction of both an innovative Semi-Supervised Learning algorithm and a novel supervised/semi-supervised learning scheme for CAD system training that improve system performance reducing data collection effort and avoiding collected data wasting. The tool provides physicians a risk map highlighting suspect tissue areas, allowing them to perform a lesion-directed biopsy. Clinical validation demonstrated the system validity as a diagnostic support tool and its effectiveness at reducing the number of biopsy cores requested for an accurate diagnosis. For UIS the research developed a heart disease diagnostic tool based on Real-Time 3D Echocardiography. Thesis contributions to this application are: (i) the development of an automated GPU based level-set segmentation framework for 3D images; (ii) the application of this framework to the myocardium segmentation. Experimental results showed the high efficiency and flexibility of the proposed framework. Its effectiveness as a tool for quantitative analysis of 3D cardiac morphology and function was demonstrated through clinical validation.

Musculoskeletal tissue regeneration by human non-embryonic stem cells

The aim of this thesis was to investigate the regenerative potential of alternative sources of stem cells, derived from human dental pulp (hDPSCs) and amniotic fluid (hAFSCs) and, specifically, to evaluate their capability to be committed towards osteogenic and myogenic lineages, for the eventual applicability of these stem cells to translational strategies in regenerative medicine of bone and skeletal muscle tissues. The in vitro bone production by stem cells may represent a radical breakthrough in the treatment of pathologies and traumas characterized by critical bone mass defects, with no medical or surgical solution. Human DPSCs and AFSCs were seeded and pre-differentiated on different scaffolds to test their capability to subsequently reach the osteogenic differentiation in vivo, in order to recover critical size bone defects. Fibroin scaffold resulted to be the best scaffold promoting mature bone formation and defect correction when combined to both hDPSCs and hAFSCs. This study also described a culture condition that might allow human DPSCs to be used for human cell therapy in compliance with good manufacturing practices (GMPs): the use of human serum (HS) promoted the expansion and the osteogenic differentiation of hDPSCs in vitro and, furthermore, allowed pre-differentiated hDPSCs to regenerate critical size bone defects in vivo. This thesis also showed that hDPSCs and hAFSCs can be differentiated towards the myogenic lineage in vitro, either when co-cultured with murine myoblasts and when differentiated alone after DNA demethylation treatment. Interestingly, when injected into dystrophic muscles of SCID/mdx mice - animal model of Duchenne Muscular Dystrophy (DMD) - hDPSCs and hAFSCs pre-differentiated after demethylating treatment were able to regenerate the skeletal muscle tissue and, particularly, to restore dystrophin expression. These observations suggest that human DPSCs and AFSCs might be eventually applied to translational strategies, in order to enhance the repair of injured skeletal muscles in DMD patients.

Advanced aspects of radiation protection in the use of particle accelerators in the medical field

In this work, the well-known MC code FLUKA was used to simulate the GE PETrace cyclotron (16.5 MeV) installed at “S. Orsola-Malpighi” University Hospital (Bologna, IT) and routinely used in the production of positron emitting radionuclides. Simulations yielded estimates of various quantities of interest, including: the effective dose distribution around the equipment; the effective number of neutron produced per incident proton and their spectral distribution; the activation of the structure of the cyclotron and the vault walls; the activation of the ambient air, in particular the production of 41Ar, the assessment of the saturation yield of radionuclides used in nuclear medicine. The simulations were validated against experimental measurements in terms of physical and transport parameters to be used at the energy range of interest in the medical field. The validated model was also extensively used in several practical applications uncluding the direct cyclotron production of non-standard radionuclides such as 99mTc, the production of medical radionuclides at TRIUMF (Vancouver, CA) TR13 cyclotron (13 MeV), the complete design of the new PET facility of “Sacro Cuore – Don Calabria” Hospital (Negrar, IT), including the ACSI TR19 (19 MeV) cyclotron, the dose field around the energy selection system (degrader) of a proton therapy cyclotron, the design of plug-doors for a new cyclotron facility, in which a 70 MeV cyclotron will be installed, and the partial decommissioning of a PET facility, including the replacement of a Scanditronix MC17 cyclotron with a new TR19 cyclotron.