Aldo Rossi, autobiografia scientifica: scrittura come progetto. Indagine critica tra scrittura e progetto di architettura

«In altri termini mi sfuggiva e ancora oggi mi sfugge gran parte del significato dell’evoluzione del tempo; come se il tempo fosse una materia che osservo dall’esterno. Questa mancanza di evoluzione è fonte di alcune mie sventure ma anche mi appartiene con gioia.» Aldo Rossi, Autobiografia scientifica. The temporal dimension underpinning the draft of Autobiografia scientifica by Aldo Rossi may be referred to what Lucien Lévy-Bruhl, the well-known French anthropologist, defines as “primitive mentality” and “prelogical” conscience : the book of life has lost its page numbers, even punctuation. For Lévy-Bruhl, but certainly for Rossi, life or its summing up becomes a continuous account of ellipses, gaps, repetitions that may be read from left to right or viceversa, from head to foot or viceversa without distinction. Rossi’s autobiographical writing seems to accept and support the confusion with which memories have been collected, recording them after the order memory gives them in the mental distillation or simply according to the chronological order in which they have happened. For Rossi, the confusion reflects the melting of memory elements into a composite image which is the result of a fusion. He is aware that the same sap pervades all memories he is going to put in order: each of them has got a common denominator. Differences have diminished, almost faded; the quick glance is prevalent over the distinction of each episode. Rossi’s writing is beyond the categories dependent on time: past and present, before and now. For Rossi, the only repetition – the repetition the text will make possible for an indefinite number of times – gives peculiarity to the event. As Gilles Deleuze knows, “things” may only last as “singleness”: more frequent the repetition is, more singular is the memory phenomenon that recurs, because only what is singular magnifies itself and happens endlessly forever. Rossi understands that “to raise the first time to nth forever”, repetition becomes glorification . It may be an autobiography that, celebrating the originality, enhances the memory event in the repetition; in fact it greatly differs from the biographical reproduction, in which each repetition is but a weaker echo, a duller copy, provided with a smaller an smaller power in comparison with the original. Paradoxically, for Deleuze the repetition asserts the originality and singularity of what is repeated. Rossi seems to share the thought expressed by Kierkegaard in the essay Repetition: «The hope is a graceful maiden slipping through your fingers; the memory of an elderly woman, indeed pretty, but never satisfactory if necessary; the repetition is a loved friend you are never tired of, as it is only the new to make you bored. The old never bores you and its presence makes you happy [...] life is but a repetition [...] here is the beauty of life» . Rossi knows well that repetition hints at the lasting stability of cosmic time. Kierkegaard goes on: «The world exists, and it exists as a repetition» . Rossi devotes himself, on purpose and in all conscience, to collect, to inventory and «to review life», his own life, according to a recovery not from the past but of the past: a search work, the «recherche du temps perdu», as Proust entitled his masterpiece on memory. If you want the past time to be not wasted, you must give it presence. «Memoria e specifico come caratteristiche per riconoscere se stesso e ciò che è estraneo mi sembravano le più chiare condizioni e spiegazioni della realtà. Non esiste uno specifico senza memoria, e una memoria che non provenga da un momento specifico; e solo questa unione permette la conoscenza della propria individualità e del contrario (self e non-self)» . Rossi wants to understand himself, his own character; it is really his own character that requires to be understood, to increase its own introspective ability and intelligence. «Può sembrare strano che Planck e Dante associno la loro ricerca scientifica e autobiografica con la morte; una morte che è in qualche modo continuazione di energia. In realtà, in ogni artista o tecnico, il principio della continuazione dell’energia si mescola con la ricerca della felicità e della morte» . The eschatological incipit of Rossi’s autobiography refers to Freud’s thought in the exact circularity of Dante’s framework and in as much exact circularity of the statement of the principle of the conservation of energy: in fact it was Freud to connect repetition to death. For Freud, the desire of repetition is an instinct rooted in biology. The primary aim of such an instinct would be to restore a previous condition, so that the repeated history represents a part of the past (even if concealed) and, relieving the removal, reduces anguish and tension. So, Freud ask himself, what is the most remote state to which the instinct, through the repetition, wants to go back? It is a pre-vital condition, inorganic of the pure entropy, a not-to-be condition in which doesn’t exist any tension; in other words, Death. Rossi, with the theme of death, introduces the theme of circularity which further on refers to the sense of continuity in transformation or, in the opposite way, the transformation in continuity. «[...] la descrizione e il rilievo delle forme antiche permettevano una continuità altrimenti irripetibile, permettevano anche una trasformazione, una volta che la vita fosse fermata in forme precise» . Rossi’s attitude seems to hint at the reflection on time and – in a broad sense – at the thought on life and things expressed by T.S. Eliot in Four Quartets: «Time present and time past / Are both perhaps present in time future, / And time future is contained in time past. / I all time is eternally present / All time is unredeemable. / What might have been is an abstraction / Remaining perpetual possibility / Only in a word of speculation. / What might have been and what has been / Point to one end, which is always present. [...]» . Aldo Rossi’s autobiographical story coincides with the description of “things” and the description of himself through the things in the exact parallel with craft or art. He seems to get all things made by man to coincide with the personal or artistic story, with the consequent immediate necessity of formulating a new interpretation: the flow of things has never met a total stop; all that exists nowadays is but a repetition or a variant of something existing some time ago and so on, without any interruption until the early dawnings of human life. Nevertheless, Rossi must operate specific subdivisions inside the continuous connection in time – of his time – even if limited by a present beginning and end of his own existence. This artist, as an “historian” of himself and his own life – as an auto-biographer – enjoys the privilege to be able to decide if and how to operate the cutting in a certain point rather than in another one, without being compelled to justify his choice. In this sense, his story is a matter very ductile and flexible: a good story-teller can choose any moment to start a certain sequence of events. Yet, Rossi is aware that, beyond the mere narration, there is the problem to identify in history - his own personal story – those flakings where a clean cut enables the separation of events of different nature. In order to do it, he has to make not only an inventory of his own “things”, but also to appeal to authority of the Divina Commedia started by Dante when he was 30. «A trent’anni si deve compiere o iniziare qualcosa di definitivo e fare i conti con la propria formazione» . For Rossi, the poet performs his authority not only in the text, but also in his will of setting out on a mystical journey and handing it down through an exact descriptive will. Rossi turns not only to the authority of poetry, but also evokes the authority of science with Max Plank and his Scientific Autobiography, published, in Italian translation, by Einaudi, 1956. Concerning Planck, Rossi resumes an element seemingly secondary in hit account where the German physicist «[...] risale alle scoperte della fisica moderna ritrovando l’impressione che gli fece l’enunciazione del principio di conservazione dell’energia; [...]» . It is again the act of describing that links Rossi to Planck, it is the description of a circularity, the one of conservation of energy, which endorses Rossi’s autobiographical speech looking for both happiness and death. Rossi seems to agree perfectly to the thought of Planck at the opening of his own autobiography: «The decision to devote myself to science was a direct consequence of a discovery which was never ceased to arouse my enthusiasm since my early youth: the laws of human thought coincide with the ones governing the sequences of the impressions we receive from the world surrounding us, so that the mere logic can enable us to penetrate into the latter one’s mechanism. It is essential that the outer world is something independent of man, something absolute. The search of the laws dealing with this absolute seems to me the highest scientific aim in life» . For Rossi the survey of his own life represents a way to change the events into experiences, to concentrate the emotion and group them in meaningful plots: «It seems, as one becomes older. / That the past has another pattern, and ceases to be a mere sequence [...]» Eliot wrote in Four Quartet, which are a meditation on time, old age and memory . And he goes on: «We had the experience but missed the meaning, / And approach to the meaning restores the experience / In a different form, beyond any meaning [...]» . Rossi restores in his autobiography – but not only in it – the most ancient sense of memory, aware that for at least 15 centuries the Latin word memoria was used to show the activity of bringing back images to mind: the psychology of memory, which starts with Aristotele (De Anima), used to consider such a faculty totally essential to mind. Keith Basso writes: «The thought materializes in the form of “images”» . Rossi knows well – as Aristotele said – that if you do not have a collection of mental images to remember – imagination – there is no thought at all. According to this psychological tradition, what today we conventionally call “memory” is but a way of imagining created by time. Rossi, entering consciously this stream of thought, passing through the Renaissance ars memoriae to reach us gives a great importance to the word and assumes it as a real place, much more than a recollection, even more than a production and an emotional elaboration of images.

The porcine animal model goes through the 3Rs: development of in vitro and ex vivo system to study vascular biology

Since the publication of the book of Russell and Burch in 1959, scientific research has never stopped improving itself with regard to the important issue of animal experimentation. The European Directive 2010/63/EU “On the protection of animals used for scientific purposes” focuses mainly on the animal welfare, fixing the Russell and Burch’s 3Rs principles as the foundations of the document. In particular, the legislator clearly states the responsibility of the scientific community to improve the number of alternative methods to animal experimentation. The swine is considered a species of relevant interest for translational research and medicine due to its biological similarities with humans. The surgical community has, in fact, recognized the swine as an excellent model replicating the human cardiovascular system. There have been several wild-type and transgenic porcine models which were produced for biomedicine and translational research. Among these, the cardiovascular ones are the most represented. The continuous involvement of the porcine animal model in the biomedical research, as the continuous advances achieved using swine in translational medicine, support the need for alternative methods to animal experimentation involving pigs. The main purpose of the present work was to develop and characterize novel porcine alternative methods for cardiovascular translational biology/medicine. The work was mainly based on two different models: the first consisted in an ex vivo culture of porcine aortic cylinders and the second consisted in an in vitro culture of porcine aortic derived progenitor cells. Both the models were properly characterized and results indicated that they could be useful to the study of vascular biology. Nevertheless, both the models aim to reduce the use of experimental animals and to refine animal based-trials. In conclusion, the present research aims to be a small, but significant, contribution to the important and necessary field of study of alternative methods to animal experimentation.

Sensitivity of the Top quark mass measurement with the CMS experiment at LHC using t-tbar multijet simulated events

This thesis comes after a strong contribution on the realization of the CMS computing system, which can be seen as a relevant part of the experiment itself. A physics analysis completes the road from Monte Carlo production and analysis tools realization to the final physics study which is the actual goal of the experiment. The topic of physics work of this thesis is the study of tt events fully hadronic decay in the CMS experiment. A multi-jet trigger has been provided to fix a reasonable starting point, reducing the multi-jet sample to the nominal trigger rate. An offline selection has been provided to reduce the S/B ratio. The b-tag is applied to provide a further S/B improvement. The selection is applied to the background sample and to the samples generated at different top quark masses. The top quark mass candidate is reconstructed for all those samples using a kinematic fitter. The resulting distributions are used to build p.d.f.’s, interpolating them with a continuous arbitrary curve. These curves are used to perform the top mass measurement through a likelihood comparison

A new approach for the dynamic modelling of the human knee

Mathematical models of the knee joint are important tools which have both theoretical and practical applications. They are used by researchers to fully understand the stabilizing role of the components of the joint, by engineers as an aid for prosthetic design, by surgeons during the planning of an operation or during the operation itself, and by orthopedists for diagnosis and rehabilitation purposes. The principal aims of knee models are to reproduce the restraining function of each structure of the joint and to replicate the relative motion of the bones which constitute the joint itself. It is clear that the first point is functional to the second one. However, the standard procedures for the dynamic modelling of the knee tend to be more focused on the second aspect: the motion of the joint is correctly replicated, but the stabilizing role of the articular components is somehow lost. A first contribution of this dissertation is the definition of a novel approach — called sequential approach — for the dynamic modelling of the knee. The procedure makes it possible to develop more and more sophisticated models of the joint by a succession of steps, starting from a first simple model of its passive motion. The fundamental characteristic of the proposed procedure is that the results obtained at each step do not worsen those already obtained at previous steps, thus preserving the restraining function of the knee structures. The models which stem from the first two steps of the sequential approach are then presented. The result of the first step is a model of the passive motion of the knee, comprehensive of the patello-femoral joint. Kinematical and anatomical considerations lead to define a one degree of freedom rigid link mechanism, whose members represent determinate components of the joint. The result of the second step is a stiffness model of the knee. This model is obtained from the first one, by following the rules of the proposed procedure. Both models have been identified from experimental data by means of an optimization procedure. The simulated motions of the models then have been compared to the experimental ones. Both models accurately reproduce the motion of the joint under the corresponding loading conditions. Moreover, the sequential approach makes sure the results obtained at the first step are not worsened at the second step: the stiffness model can also reproduce the passive motion of the knee with the same accuracy than the previous simpler model. The procedure proved to be successful and thus promising for the definition of more complex models which could also involve the effect of muscular forces.

The social construction of cooperation: exchange, identification and collective intentions within the organization

My aim is to develop a theory of cooperation within the organization and empirically test it. Drawing upon social exchange theory, social identity theory, the idea of collective intentions, and social constructivism, the main assumption of my work implies that both cooperation and the organization itself are continually shaped and restructured by actions, judgments, and symbolic interpretations of the parties involved. Therefore, I propose that the decision to cooperate, expressed say as an intention to cooperate, reflects and depends on a three step social process shaped by the interpretations of the actors involved. The first step entails an instrumental evaluation of cooperation in terms of social exchange. In the second step, this “social calculus” is translated into cognitive, emotional and evaluative reactions directed toward the organization. Finally, once the identification process is completed and membership awareness is established, I propose that individuals will start to think largely in terms of “We” instead of “I”. Self-goals are redefined at the collective level, and the outcomes for self, others, and the organization become practically interchangeable. I decided to apply my theory to an important cooperative problem in management research: knowledge exchange within organizations. Hence, I conducted a quantitative survey among the members of the virtual community, “www.borse.it” (n=108). Within this community, members freely decide to exchange their knowledge about the stock market among themselves. Because of the confirmatory requirements and the structural complexity of the theory proposed (i.e., the proposal that instrumental evaluations will induce social identity and this in turn will causes collective intentions), I use Structural Equation Modeling to test all hypotheses in this dissertation. The empirical survey-based study found support for the theory of cooperation proposed in this dissertation. The findings suggest that an appropriate conceptualization of the decision to exchange knowledge is one where collective intentions depend proximally on social identity (i.e., cognitive identification, affective commitment, and evaluative engagement) with the organization, and this identity depends on instrumental evaluations of cooperators (i.e., perceived value of the knowledge received, assessment of past reciprocity, expected reciprocity, and expected social outcomes of the exchange). Furthermore, I find that social identity fully mediates the effects of instrumental motives on collective intentions.

Technical innovations for the diagnosis and the rehabilitation of motor and perceptive impairments of the child with Cerebral Palsy

The treatment of the Cerebral Palsy (CP) is considered as the “core problem” for the whole field of the pediatric rehabilitation. The reason why this pathology has such a primary role, can be ascribed to two main aspects. First of all CP is the form of disability most frequent in childhood (one new case per 500 birth alive, (1)), secondarily the functional recovery of the “spastic” child is, historically, the clinical field in which the majority of the therapeutic methods and techniques (physiotherapy, orthotic, pharmacologic, orthopedic-surgical, neurosurgical) were first applied and tested. The currently accepted definition of CP – Group of disorders of the development of movement and posture causing activity limitation (2) – is the result of a recent update by the World Health Organization to the language of the International Classification of Functioning Disability and Health, from the original proposal of Ingram – A persistent but not unchangeable disorder of posture and movement – dated 1955 (3). This definition considers CP as a permanent ailment, i.e. a “fixed” condition, that however can be modified both functionally and structurally by means of child spontaneous evolution and treatments carried out during childhood. The lesion that causes the palsy, happens in a structurally immature brain in the pre-, peri- or post-birth period (but only during the firsts months of life). The most frequent causes of CP are: prematurity, insufficient cerebral perfusion, arterial haemorrhage, venous infarction, hypoxia caused by various origin (for example from the ingestion of amniotic liquid), malnutrition, infection and maternal or fetal poisoning. In addition to these causes, traumas and malformations have to be included. The lesion, whether focused or spread over the nervous system, impairs the whole functioning of the Central Nervous System (CNS). As a consequence, they affect the construction of the adaptive functions (4), first of all posture control, locomotion and manipulation. The palsy itself does not vary over time, however it assumes an unavoidable “evolutionary” feature when during growth the child is requested to meet new and different needs through the construction of new and different functions. It is essential to consider that clinically CP is not only a direct expression of structural impairment, that is of etiology, pathogenesis and lesion timing, but it is mainly the manifestation of the path followed by the CNS to “re”-construct the adaptive functions “despite” the presence of the damage. “Palsy” is “the form of the function that is implemented by an individual whose CNS has been damaged in order to satisfy the demands coming from the environment” (4). Therefore it is only possible to establish general relations between lesion site, nature and size, and palsy and recovery processes. It is quite common to observe that children with very similar neuroimaging can have very different clinical manifestations of CP and, on the other hand, children with very similar motor behaviors can have completely different lesion histories. A very clear example of this is represented by hemiplegic forms, which show bilateral hemispheric lesions in a high percentage of cases. The first section of this thesis is aimed at guiding the interpretation of CP. First of all the issue of the detection of the palsy is treated from historical viewpoint. Consequently, an extended analysis of the current definition of CP, as internationally accepted, is provided. The definition is then outlined in terms of a space dimension and then of a time dimension, hence it is highlighted where this definition is unacceptably lacking. The last part of the first section further stresses the importance of shifting from the traditional concept of CP as a palsy of development (defect analysis) towards the notion of development of palsy, i.e., as the product of the relationship that the individual however tries to dynamically build with the surrounding environment (resource semeiotics) starting and growing from a different availability of resources, needs, dreams, rights and duties (4). In the scientific and clinic community no common classification system of CP has so far been universally accepted. Besides, no standard operative method or technique have been acknowledged to effectively assess the different disabilities and impairments exhibited by children with CP. CP is still “an artificial concept, comprising several causes and clinical syndromes that have been grouped together for a convenience of management” (5). The lack of standard and common protocols able to effectively diagnose the palsy, and as a consequence to establish specific treatments and prognosis, is mainly because of the difficulty to elevate this field to a level based on scientific evidence. A solution aimed at overcoming the current incomplete treatment of CP children is represented by the clinical systematic adoption of objective tools able to measure motor defects and movement impairments. A widespread application of reliable instruments and techniques able to objectively evaluate both the form of the palsy (diagnosis) and the efficacy of the treatments provided (prognosis), constitutes a valuable method able to validate care protocols, establish the efficacy of classification systems and assess the validity of definitions. Since the ‘80s, instruments specifically oriented to the analysis of the human movement have been advantageously designed and applied in the context of CP with the aim of measuring motor deficits and, especially, gait deviations. The gait analysis (GA) technique has been increasingly used over the years to assess, analyze, classify, and support the process of clinical decisions making, allowing for a complete investigation of gait with an increased temporal and spatial resolution. GA has provided a basis for improving the outcome of surgical and nonsurgical treatments and for introducing a new modus operandi in the identification of defects and functional adaptations to the musculoskeletal disorders. Historically, the first laboratories set up for gait analysis developed their own protocol (set of procedures for data collection and for data reduction) independently, according to performances of the technologies available at that time. In particular, the stereophotogrammetric systems mainly based on optoelectronic technology, soon became a gold-standard for motion analysis. They have been successfully applied especially for scientific purposes. Nowadays the optoelectronic systems have significantly improved their performances in term of spatial and temporal resolution, however many laboratories continue to use the protocols designed on the technology available in the ‘70s and now out-of-date. Furthermore, these protocols are not coherent both for the biomechanical models and for the adopted collection procedures. In spite of these differences, GA data are shared, exchanged and interpreted irrespectively to the adopted protocol without a full awareness to what extent these protocols are compatible and comparable with each other. Following the extraordinary advances in computer science and electronics, new systems for GA no longer based on optoelectronic technology, are now becoming available. They are the Inertial and Magnetic Measurement Systems (IMMSs), based on miniature MEMS (Microelectromechanical systems) inertial sensor technology. These systems are cost effective, wearable and fully portable motion analysis systems, these features gives IMMSs the potential to be used both outside specialized laboratories and to consecutive collect series of tens of gait cycles. The recognition and selection of the most representative gait cycle is then easier and more reliable especially in CP children, considering their relevant gait cycle variability. The second section of this thesis is focused on GA. In particular, it is firstly aimed at examining the differences among five most representative GA protocols in order to assess the state of the art with respect to the inter-protocol variability. The design of a new protocol is then proposed and presented with the aim of achieving gait analysis on CP children by means of IMMS. The protocol, named ‘Outwalk’, contains original and innovative solutions oriented at obtaining joint kinematic with calibration procedures extremely comfortable for the patients. The results of a first in-vivo validation of Outwalk on healthy subjects are then provided. In particular, this study was carried out by comparing Outwalk used in combination with an IMMS with respect to a reference protocol and an optoelectronic system. In order to set a more accurate and precise comparison of the systems and the protocols, ad hoc methods were designed and an original formulation of the statistical parameter coefficient of multiple correlation was developed and effectively applied. On the basis of the experimental design proposed for the validation on healthy subjects, a first assessment of Outwalk, together with an IMMS, was also carried out on CP children. The third section of this thesis is dedicated to the treatment of walking in CP children. Commonly prescribed treatments in addressing gait abnormalities in CP children include physical therapy, surgery (orthopedic and rhizotomy), and orthoses. The orthotic approach is conservative, being reversible, and widespread in many therapeutic regimes. Orthoses are used to improve the gait of children with CP, by preventing deformities, controlling joint position, and offering an effective lever for the ankle joint. Orthoses are prescribed for the additional aims of increasing walking speed, improving stability, preventing stumbling, and decreasing muscular fatigue. The ankle-foot orthosis (AFO), with a rigid ankle, are primarily designed to prevent equinus and other foot deformities with a positive effect also on more proximal joints. However, AFOs prevent the natural excursion of the tibio-tarsic joint during the second rocker, hence hampering the natural leaning progression of the whole body under the effect of the inertia (6). A new modular (submalleolar) astragalus-calcanear orthosis, named OMAC, has recently been proposed with the intention of substituting the prescription of AFOs in those CP children exhibiting a flat and valgus-pronated foot. The aim of this section is thus to present the mechanical and technical features of the OMAC by means of an accurate description of the device. In particular, the integral document of the deposited Italian patent, is provided. A preliminary validation of OMAC with respect to AFO is also reported as resulted from an experimental campaign on diplegic CP children, during a three month period, aimed at quantitatively assessing the benefit provided by the two orthoses on walking and at qualitatively evaluating the changes in the quality of life and motor abilities. As already stated, CP is universally considered as a persistent but not unchangeable disorder of posture and movement. Conversely to this definition, some clinicians (4) have recently pointed out that movement disorders may be primarily caused by the presence of perceptive disorders, where perception is not merely the acquisition of sensory information, but an active process aimed at guiding the execution of movements through the integration of sensory information properly representing the state of one’s body and of the environment. Children with perceptive impairments show an overall fear of moving and the onset of strongly unnatural walking schemes directly caused by the presence of perceptive system disorders. The fourth section of the thesis thus deals with accurately defining the perceptive impairment exhibited by diplegic CP children. A detailed description of the clinical signs revealing the presence of the perceptive impairment, and a classification scheme of the clinical aspects of perceptual disorders is provided. In the end, a functional reaching test is proposed as an instrumental test able to disclosure the perceptive impairment. References 1. Prevalence and characteristics of children with cerebral palsy in Europe. Dev Med Child Neurol. 2002 Set;44(9):633-640. 2. Bax M, Goldstein M, Rosenbaum P, Leviton A, Paneth N, Dan B, et al. Proposed definition and classification of cerebral palsy, April 2005. Dev Med Child Neurol. 2005 Ago;47(8):571-576. 3. Ingram TT. A study of cerebral palsy in the childhood population of Edinburgh. Arch. Dis. Child. 1955 Apr;30(150):85-98. 4. Ferrari A, Cioni G. The spastic forms of cerebral palsy : a guide to the assessment of adaptive functions. Milan: Springer; 2009. 5. Olney SJ, Wright MJ. Cerebral Palsy. Campbell S et al. Physical Therapy for Children. 2nd Ed. Philadelphia: Saunders. 2000;:533-570. 6. Desloovere K, Molenaers G, Van Gestel L, Huenaerts C, Van Campenhout A, Callewaert B, et al. How can push-off be preserved during use of an ankle foot orthosis in children with hemiplegia? A prospective controlled study. Gait Posture. 2006 Ott;24(2):142-151.

Experimental and numerical analyses about the efficiency of flow through devices for the sediment controll in urban runoff

As land is developed, the impervious surfaces that are created increase the amount of runoff during rainfall events, disrupting the natural hydrologic cycle, with an increment in volume of runoff and in pollutant loadings. Pollutants deposited or derived from an activity on the land surface will likely end up in stormwater runoff in some concentration, such as nutrients, sediment, heavy metals, hydrocarbons, gasoline additives, pathogens, deicers, herbicides and pesticides. Several of these pollutants are particulate-bound, so it appears clear that sediment removal can provide significant water-quality improvements and it appears to be important the knowledge of the ability of stromwater treatment devices to retain particulate matter. For this reason three different units which remove sediments have been tested through laboratory. In particular a roadside gully pot has been tested under steady hydraulic conditions, varying the characteristics of the influent solids (diameter, particle size distribution and specific gravity). The efficiency in terms of particles retained has been evaluated as a function of influent flow rate and particles characteristics; results have been compared to efficiency evaluated applying an overflow rate model. Furthermore the role of particles settling velocity in efficiency determination has been investigated. After the experimental runs on the gully pot, a standard full-scale model of an hydrodynamic separator (HS) has been tested under unsteady influent flow rate condition, and constant solid concentration at the input. The results presented in this study illustrate that particle separation efficiency of the unit is predominately influenced by operating flow rate, which strongly affects the particles and hydraulic residence time of the system. The efficiency data have been compared to results obtained from a modified overflow rate model; moreover the residence time distribution has been experimentally determined through tracer analyses for several steady flow rates. Finally three testing experiments have been performed for two different configurations of a full-scale model of a clarifier (linear and crenulated) under unsteady influent flow rate condition, and constant solid concentration at the input. The results illustrate that particle separation efficiency of the unit is predominately influenced by the configuration of the unit itself. Turbidity measures have been used to compare turbidity with the suspended sediments concentration, in order to find a correlation between these two values, which can allow to have a measure of the sediments concentration simply installing a turbidity probe.

Study of the X(3872) state with the CMS experiment at LHC

The surprising discovery of the X(3872) resonance by the Belle experiment in 2003, and subsequent confirmation by BaBar, CDF and D0, opened up a new chapter of QCD studies and puzzles. Since then, detailed experimental and theoretical studies have been performed in attempt to determine and explain the proprieties of this state. Since the end of 2009 the world’s largest and highest-energy particle accelerator, the Large Hadron Collider (LHC), started its operations at the CERN laboratories in Geneva. One of the main experiments at LHC is CMS (Compact Muon Solenoid), a general purpose detector projected to address a wide range of physical phenomena, in particular the search of the Higgs boson, the only still unconfirmed element of the Standard Model (SM) of particle interactions and, new physics beyond the SM itself. Even if CMS has been designed to study high energy events, it’s high resolution central tracker and superior muon spectrometer made it an optimal tool to study the X(3872) state. In this thesis are presented the results of a series of study on the X(3872) state performed with the CMS experiment. Already with the first year worth of data, a clear peak for the X(3872) has been identified, and the measurement of the cross section ratio with respect to the Psi(2S) has been performed. With the increased statistic collected during 2011 it has been possible to study, in bins of transverse momentum, the cross section ratio between X(3872) and Psi(2S) and separate their prompt and non-prompt component.

New mechanisms for modelling the motion of the human ankle complex

The relevance of human joint models was shown in the literature. In particular, the great importance of models for the joint passive motion simulation (i.e. motion under virtually unloaded conditions) was outlined. They clarify the role played by the principal anatomical structures of the articulation, enhancing the comprehension of surgical treatments, and in particular the design of total ankle replacement and ligament reconstruction. Equivalent rigid link mechanisms proved to be an efficient tool for an accurate simulation of the joint passive motion. This thesis focuses on the ankle complex (i.e. the anatomical structure composed of the tibiotalar and the subtalar joints), which has a considerable role in human locomotion. The lack of interpreting models of this articulation and the poor results of total ankle replacement arthroplasty have strongly suggested devising new mathematical models capable of reproducing the restraining function of each structure of the joint and of replicating the relative motion of the bones which constitute the joint itself. In this contest, novel equivalent mechanisms are proposed for modelling the ankle passive motion. Their geometry is based on the joint’s anatomical structures. In particular, the role of the main ligaments of the articulation is investigated under passive conditions by means of nine 5-5 fully parallel mechanisms. Based on this investigation, a one-DOF spatial mechanism is developed for modelling the passive motion of the lower leg. The model considers many passive structures constituting the articulation, overcoming the limitations of previous models which took into account few anatomical elements of the ankle complex. All the models have been identified from experimental data by means of optimization procedure. Then, the simulated motions have been compared to the experimental one, in order to show the efficiency of the approach and thus to deduce the role of each anatomical structure in the ankle kinematic behavior.

Rituali indigeni in Mesoamerica. La festa di Petición de Lluvias nella Montaña di Guerrero (Messico)

Questa tesi di carattere antropologico in ambito dottorale riguarda i rituali comunitari nelle comunità indigene messicane. Il principale oggetto della ricerca è il rituale della pioggia o di Petición de Lluvia, caratterizzato sia dal sacrificio animale che da una specifica relazione di causa-effetto con l’ambiente circostante. La ricerca etnografica è cominciata dall’ipotesi di voler verificare la persistenza nel tempo, e dunque nell’attualità, di procedure cerimoniali non appartenenti, almeno nella loro forma più lineare, alla religione cattolico-cristiana. Il luogo nel quale è avvenuta tale ricerca è la regione La Montaña di Guerrero, situata nel Messico sud-occidentale, e più precisamente la zona in cui vivono le comunità di etnia Nahua di San Pedro Petlacala, Acuilpa, e Xalpatláhuac che si trovano nelle vicinanze della cittadina di Tlapa de Comonfort. In un contesto ambientale profondamente rurale come quello della Montaña di Guerrero, la persistenza dei rituali evidenzia come le risorse naturali e gli agenti atmosferici - pioggia, vento, nubi - continuino a rappresentare gli elementi centrali che condizionano le variabili economiche di sussistenza e della riproduzione sociale. Il rituale di Petición de Lluvia rappresenta il momento di congiunzione tra la stagione secca e quella piovosa, tra la semina ed il raccolto del mais. Definito come una pratica religiosa nella quale il gruppo si identifica e partecipa con varie donazioni (ofrenda o deposito rituale), suddivisibili in alimenti/oggetti/preghiere ed azioni rituali, la cerimonia esprime l’auspicio di piogge abbondanti, con le quali irrigare i campi e continuare le attività umane. Il destinatario dell’offerta è la stessa divinità della pioggia, Tlaloc per le antiche civiltà mesoamericane, invocato sotto le mentite spoglie del santo patrono del 25 aprile, San Marcos. Il rituale è contraddistinto per tutta la sua durata dalla presenza del principale specialista religioso, sacerdote in lingua spagnola oppure «Tlahmáquetl» in lingua náhuatl.

A SMO inhibitor drug reduces the progenitor cell's maintenance in the Drosophila hematopoietic organ: a novel model to study Chronic Myelogenous Leukemia relapse

The chronic myeloid leukemia complexity and the difficulties of disease eradication have recently led to the development of drugs which, together with the inhibitors of TK, could eliminate leukemia stem cells preventing the occurrence of relapses in patients undergoing transplantation. The Hedgehog (Hh) signaling pathway positively regulates the self-renewal and the maintenance of leukemic stem cells and not, and this function is evolutionarily conserved. Using Drosophila as a model, we studied the efficacy of the SMO inhibitor drug that inhibit the human protein Smoothened (SMO). SMO is a crucial component in the signal transduction of Hh and its blockade in mammals leads to a reduction in the disease induction. Here we show that administration of the SMO inhibitor to animals has a specific effect directed against the Drosophila ortholog protein, causing loss of quiescence and hematopoietic precursors mobilization. The SMO inhibitor induces in L3 larvae the appearance of melanotic nodules generated as response by Drosophila immune system to the increase of its hemocytes. The same phenotype is induced even by the dsRNA:SMO specific expression in hematopoietic precursors of the lymph gland. The drug action is also confirmed at cellular level. The study of molecular markers has allowed us to demonstrate that SMO inhibitor leads to a reduction of the quiescent precursors and to an increase of the differentiated cells. Moreover administering the inhibitor to heterozygous for a null allele of Smo, we observe a significant increase in the phenotype penetrance compared to administration to wild type animals. This helps to confirm the specific effect of the drug itself. These data taken together indicate that the study of inhibitors of Smo in Drosophila can represent a useful way to dissect their action mechanism at the molecular-genetic level in order to collect information applicable to the studies of the disease in humans.

COSMIC-LAB: Terzan 5 as a fossil remnant of the Galactic bulge formation epoch

The formation and evolution of galaxy bulges is a greatly debated topic in modern astrophysics. An approach to address this issue is to look at the Galactic bulge, the closest to us. According to some theoretical models, our bulge built-up from the merger of substructures formed from the instability and fragmentation of a proto-disk in the early phases of Galactic evolution. We may have discovered the remnant of one of these substructures: the stellar system Terzan 5. Terzan 5 hosts two stellar populations with different iron abundances, thus suggesting it once was far more massive than today. Moreover, its peculiar chemistry resembles that observed only in the Galactic bulge. In this Thesis we perform a detailed photometric and spectroscopic analysis of this cluster to determine its formation and evolutionary histories. Form the photometric point of view we built a high-resolution differential reddening map in Terzan 5 direction and we measured relative proper motions to separate its member population from the contaminating field stars. This information represents the necessary work to measure the absolute ages of Terzan 5 populations via the Turn-off luminosity method. From the spectroscopic point of view we measured abundances for more than 600 stars belonging to Terzan 5 and its surroundings in order to build the largest field-decontaminated metallicity distribution for this system. We find that the metallicity distribution is extremely wide (more than 1 dex) and we discovered a third, metal-poor and alpha-enhanced population with average [Fe/H]=-0.8. The striking similarity between Terzan 5 and the bulge in terms of their chemical formation and evolution revealed by this Thesis suggests that Terzan 5 formed in situ with the bulge itself. In particular its metal-poor populations trace the early stages of the bulge formation, while its most metal-rich component contains crucial information on the bulge more recent evolution.

Statistical analysis of the error associated with the simplification of the stratigraphy in geotechnical models

The uncertainties in the determination of the stratigraphic profile of natural soils is one of the main problems in geotechnics, in particular for landslide characterization and modeling. The study deals with a new approach in geotechnical modeling which relays on a stochastic generation of different soil layers distributions, following a boolean logic – the method has been thus called BoSG (Boolean Stochastic Generation). In this way, it is possible to randomize the presence of a specific material interdigitated in a uniform matrix. In the building of a geotechnical model it is generally common to discard some stratigraphic data in order to simplify the model itself, assuming that the significance of the results of the modeling procedure would not be affected. With the proposed technique it is possible to quantify the error associated with this simplification. Moreover, it could be used to determine the most significant zones where eventual further investigations and surveys would be more effective to build the geotechnical model of the slope. The commercial software FLAC was used for the 2D and 3D geotechnical model. The distribution of the materials was randomized through a specifically coded MatLab program that automatically generates text files, each of them representing a specific soil configuration. Besides, a routine was designed to automate the computation of FLAC with the different data files in order to maximize the sample number. The methodology is applied with reference to a simplified slope in 2D, a simplified slope in 3D and an actual landslide, namely the Mortisa mudslide (Cortina d’Ampezzo, BL, Italy). However, it could be extended to numerous different cases, especially for hydrogeological analysis and landslide stability assessment, in different geological and geomorphological contexts.