PCM-based battery thermal management systems, energy saving materials and LCA strategy for automotive

This PhD work arises from the necessity to give a contribution to the energy saving field, regarding automotive applications. The aim was to produce a multidisciplinary work to show how much important is to consider different aspects of an electric car realization: from innovative materials to cutting-edge battery thermal management systems (BTMSs), also dealing with the life cycle assessment (LCA) of the battery packs (BPs). Regarding the materials, it has been chosen to focus on carbon fiber composites as their use allows realizing light products with great mechanical properties. Processes and methods to produce carbon fiber goods have been analysed with a special attention on the university solar car Emilia 4. The work proceeds dealing with the common BTMSs on the market (air-cooled, cooling plates, heat pipes) and then it deepens some of the most innovative systems such as the PCM-based BTMSs after a previous experimental campaign to characterize the PCMs. After that, a complex experimental campaign regarding the PCM-based BTMSs has been carried on, considering both uninsulated and insulated systems. About the first category the tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs; the insulated tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs and both of these systems equipped with a liquid cooling circuit. The choice of lighter building materials and the optimization of the BTMS are strategies which helps in reducing the energy consumption, considering both the energy required by the car to move and the BP state of health (SOH). Focusing on this last factor, a clear explanation regarding the importance of taking care about the SOH is given by the analysis of a BP production energy consumption. This is why a final dissertation about the life cycle assessment (LCA) of a BP unit has been presented in this thesis.

Asymmetric aminocatalysis: a modern strategy for molecules, challenges and life

The studies conducted during my Phd thesis were focused on two different directions: 1. In one case we tried to face some long standing problems of the asymmetric aminocatalysis as the activation of encumbered carbonyl compounds and the control of the diastereoisomeric ratio in the diastero- and enantioselective construction of all carbon substituted quaternary stereocenters adjacent a tertiary one. In this section (Challenges) was described the asymmetric aziridination of ,-unsaturated ketones, the activation of ,-unsaturated -branched aldehydes and the Michael addition of oxindoles to enals and enones. For the activation via iminium ion formation of sterically demanding substrates, as ,-unsaturated ketones and ,-unsaturated -branched aldehydes, we exploited a chiral primary amine in order to overcome the problem of the iminium ion formation between the catalyst and encumbered carbonylic componds. For the control of diastereoisomeric ratio in the diastero- and enantioselective construction of all carbon substituted quaternary stereocenters adjacent a tertiary one we envisaged that a suitable strategy was the Michael addition to 3 substituted oxindoles to enals activated via LUMO-lowering catalysis. In this synthetic protocol we designed a new bifunctional catalyst with an amine moiety for activate the aldehyde and a tioureidic fragment for direct the approach of the oxindole. This part of the thesis (Challenges) could be considered pure basic research, where the solution of the synthetic problem was the goal itself of the research. 2. In the other hand (Molecules) we applied our knowledge about the carbonylic compounds activation and about cascade reaction to the synthesis of three new classes of spirooxindole in enantiopure form. The construction of libraries of these bioactive compounds represented a scientific bridge between medicinal chemistry or biology and the asymmetric catalysis.

On land management: landowners' attitudes to land and farming in Valdera, Tuscany

This thesis aims at explaining the intersecting dynamics of structural changes in agriculture and urbanisation, which involves changes in urban-rural relationships. The research questions are: how and why do landowners differ in their attitudes to land and farming? what are the main implications on rural landscapes and the policy implications? Relationships between urbanisation and agriculture are firstly analysed through a critical literature review; the analysis focuses on the 'landowner' as the key actor who actively takes decisions on the rural landscape From the empirical study – which is based on a Tuscan area (Valdera), and addressed through qualitative methods – a great diversity of landowners' attitudes to land and farming emerge, thus contributing to the agricultural restructuring, such as: 1) the emphasis on recreational function of the countryside for urban people 2) contracting out of land management, especially when landowners live or/and have 'urban' employment 3) the active role of hobby farmers in land management 4) agricultural operations simplification and lack of investments (especially in case of property rights expropriation). The thesis is framed in three papers, with the same methods and research questions. It seems evident that rural landscapes is subjected to functional changes (e.g. residential) and structural changes (landscape polarisation), which requires the need 1) to consider that rural landscape management is increasingly less connected to agricultural production as economic activity; 2) to give a coherence to the range of policy interventions (physical planning, landscape, sectoral).

Code synchronization and interference management techniques for satellite navigation and communications

This thesis collects the outcomes of a Ph.D. course in Telecommunications engineering and it is focused on enabling techniques for Spread Spectrum (SS) navigation and communication satellite systems. It provides innovations for both interference management and code synchronization techniques. These two aspects are critical for modern navigation and communication systems and constitute the common denominator of the work. The thesis is organized in two parts: the former deals with interference management. We have proposed a novel technique for the enhancement of the sensitivity level of an advanced interference detection and localization system operating in the Global Navigation Satellite System (GNSS) bands, which allows the identification of interfering signals received with power even lower than the GNSS signals. Moreover, we have introduced an effective cancellation technique for signals transmitted by jammers, exploiting their repetitive characteristics, which strongly reduces the interference level at the receiver. The second part, deals with code synchronization. More in detail, we have designed the code synchronization circuit for a Telemetry, Tracking and Control system operating during the Launch and Early Orbit Phase; the proposed solution allows to cope with the very large frequency uncertainty and dynamics characterizing this scenario, and performs the estimation of the code epoch, of the carrier frequency and of the carrier frequency variation rate. Furthermore, considering a generic pair of circuits performing code acquisition, we have proposed a comprehensive framework for the design and the analysis of the optimal cooperation procedure, which minimizes the time required to accomplish synchronization. The study results particularly interesting since it enables the reduction of the code acquisition time without increasing the computational complexity. Finally, considering a network of collaborating navigation receivers, we have proposed an innovative cooperative code acquisition scheme, which allows exploit the shared code epoch information between neighbor nodes, according to the Peer-to-Peer paradigm.

Effects and Modes od Action of Canopy Management Practices on Vine Physiology and Berry Composition in Organically-Cultivated cv. Sangiovese (Vitis Vinifera L.)

In organic and biodynamic vineyards, canopy management practices should be carefully and timely modulated, particularly in a context of climate change, for successfully achieving balanced plants, ventilated and exposed berries, elevated grape and wine quality. In 2013 and 2014, characterized by contrasting climatic conditions, the implications of post-veraison (late) or pea-size trimming, post-veraison or pre-harvest late defoliations and shoot-positioning (post-veraison) were assessed against long-shoots non treated controls, under field conditions on organically-cultivated cv. Sangiovese. The key agronomic and enological relevance of late trimming and defoliations clearly emerged in both seasons. Berry skin phenolics (e.g. anthocyanins, flavonols) increased markedly, without changes in technological parameters. In case of early trimming, such positive effects were observed only in 2013. Maintaining long shoots for shading decreased anthocyanins, flavonols and total phenolics concentrations and promoted the production of compact bunches. Experimental data strongly designated late trimming, a practice proved to contain yield and bunch compactness, as a valuable alternative to cluster thinning. Late trimming, defoliations and shoot positioning reduced the severity of Botrytis cluster rot. The highest levels of berry skins phenolic compounds in late trimmed and defoliated plants could have contributed control the severity of this pathogen. The enological benefits induced by late trimming and defoliations and shoot positioning emerged in both young and aged wines. For the first time, cell cultures from cv. Sangiovese berry tissues were obtained and enabled to investigate, in controlled conditions, the relations between mechanisms regulating secondary metabolism in grapevine cells and changes induced by environmental and agronomic factors. The Doctoral Dissertation strongly highlights the need to consider, for a proper interpretation of the multiple modifications induced by canopy management strategies, physiological mechanisms other than the canonic source-sink relationships, in particular their impact on the vine hormonal status.

3D Surveying and Data Management towards the Realization of a Knowledge System for Cultural Heritage

The research activities involved the application of the Geomatic techniques in the Cultural Heritage field, following the development of two themes: Firstly, the application of high precision surveying techniques for the restoration and interpretation of relevant monuments and archaeological finds. The main case regards the activities for the generation of a high-fidelity 3D model of the Fountain of Neptune in Bologna. In this work, aimed to the restoration of the manufacture, both the geometrical and radiometrical aspects were crucial. The final product was the base of a 3D information system representing a shared tool where the different figures involved in the restoration activities shared their contribution in a multidisciplinary approach. Secondly, the arrangement of 3D databases for a Building Information Modeling (BIM) approach, in a process which involves the generation and management of digital representations of physical and functional characteristics of historical buildings, towards a so-called Historical Building Information Model (HBIM). A first application was conducted for the San Michele in Acerboli’s church in Santarcangelo di Romagna. The survey was performed by the integration of the classical and modern Geomatic techniques and the point cloud representing the church was used for the development of a HBIM model, where the relevant information connected to the building could be stored and georeferenced. A second application regards the domus of Obellio Firmo in Pompeii, surveyed by the integration of the classical and modern Geomatic techniques. An historical analysis permitted the definitions of phases and the organization of a database of materials and constructive elements. The goal is the obtaining of a federate model able to manage the different aspects: documental, analytic and reconstructive ones.

Deep and near space tracking stations in support of lunar and planetary exploration missions

The aim of this dissertation is to describe the methodologies required to design, operate, and validate the performance of ground stations dedicated to near and deep space tracking, as well as the models developed to process the signals acquired, from raw data to the output parameters of the orbit determination of spacecraft. This work is framed in the context of lunar and planetary exploration missions by addressing the challenges in receiving and processing radiometric data for radio science investigations and navigation purposes. These challenges include the designing of an appropriate back-end to read, convert and store the antenna voltages, the definition of appropriate methodologies for pre-processing, calibration, and estimation of radiometric data for the extraction of information on the spacecraft state, and the definition and integration of accurate models of the spacecraft dynamics to evaluate the goodness of the recorded signals. Additionally, the experimental design of acquisition strategies to perform direct comparison between ground stations is described and discussed. In particular, the evaluation of the differential performance between stations requires the designing of a dedicated tracking campaign to maximize the overlap of the recorded datasets at the receivers, making it possible to correlate the received signals and isolate the contribution of the ground segment to the noise in the single link. Finally, in support of the methodologies and models presented, results from the validation and design work performed on the Deep Space Network (DSN) affiliated nodes DSS-69 and DSS-17 will also be reported.