Caratterizzazione meccanica multiscala di materiali rocciosi strutturalmente complessi

The research work was aimed at studying, with a deterministic approach, the relationships between the rock’s texture and its mechanical properties determined at the laboratory scale. The experimentation was performed on a monomineralic crystalline rock, varying in texture, i.e. grains shape. Multi-scale analysis has been adopted to determine the elasto-mechanical properties of the crystals composing the rock and its strength and deformability at the macro-scale. This let us to understand how the structural variability of the investigated rock affects its macromechanical behaviour. Investigations have been performed on three different scales: nano-scale (order of nm), micro-scale (tens of m) and macro-scale (cm). Innovative techniques for rock mechanics, i.e. Depth Sensing Indentation (DSI), have been applied, in order to determine the elasto-mechanical properties of the calcite grains. These techniques have also allowed to study the influence of grain boundaries on the mechanical response of calcite grains by varying the indents’ sizes and to quantify the effect of the applied load on the hardness and elastic modulus of the grain (indentation size effect, ISE). The secondary effects of static indentation Berkovich, Vickers and Knoop were analyzed by SEM, and some considerations on the rock’s brittle behaviour and the effect of microcracks can be made.

Effect of Laser Shock Peening on Fatigue Crack Propagation of Aeronautical Structures

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses up to several mm underneath the surface of metal components in order to improve the detrimental effects of crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior of thin Aluminum specimens with one or more LSP stripes defining a compressive residual stress area. The LSP treatment has been applied as crack retardation stripes perpendicular to the crack growing direction, with the objective of slowing down the crack when approaching the LSP patterns. Different finite element approaches have been implemented to predict the residual stress field left by the laser treatment, mostly by means of the commercial software Abaqus/Explicit. The Afgrow software has been used to predict the crack growth behavior of the component following the laser peening treatment and to detect the improvement in fatigue life comparing to the specimen baseline. Furthermore, an analytical model has been implemented on the Matlab software to make more accurate predictions on fatigue life of the treated components. An educational internship at the Research and Technologies Germany- Hamburg department of Airbus helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: -To up to date Literature Survey related to laser shock peening in metallic structures -To validate the FE models developed against experimental measurements at coupon level -To develop design of crack growth slow down in centered and edge cracked tension specimens based on residual stress engineering approach using laser peened patterns transversal to the crack path -To predict crack growth behavior of thin aluminum panels -To validate numerical and analytical results by means of experimental tests.

Studio prospettico osservazionale sull'interruzione volontaria farmacologica di gravidanza: fattori predittivi di dolore pelvico durante il trattamento

INTRODUZIONE Pochi studi in Letteratura hanno indagato la correlazione tra la sintomatologia dolorosa associata all’interruzione farmacologica di gravidanza (IVG) e i livelli d’ansia pre-trattamento. L’obiettivo primario del nostro studio è stato di valutare la correlazione tra la sintomatologia dolorosa in corso di IVG farmacologica e i livelli d’ansia pre-trattamento. Inoltre, sono stati indagati i fattori predittivi di dolore e la correlazione con l’epoca gestazionale. MATERIALI E METODI È stato condotto uno studio osservazionale, prospettico, multicentrico presso l’Unità Operativa di Ostetricia e Ginecologia dell’Azienda USL e presso l’Unità Operativa di Ginecologia dell’IRCCS Sant’Orsola Malpighi di Bologna. Sono state incluse le pazienti sottoposte a IVG farmacologica tra giugno 2021 e novembre 2021, che rispettassero i criteri di inclusione ed esclusione. Sono stati somministrati 5 questionari (GHQ-12, GAD-7, STAI-6, VAS) e raccolti i dati anamnestici ed ecografici. I potenziali fattori di rischio sono stati, quindi, selezionati per l’inclusione nell'analisi di regressione multivariata. RISULTATI Delle 242 pazienti incluse, il 38,0% ha riferito una sintomatologia dolorosa severa (VAS >70). Dall’analisi di regressione multivariata, la dismenorrea intensa è risultata essere il fattore di rischio più forte per il dolore (OR = 6,30, IC 95% 2,66 – 14,91), seguita da alti livelli di ansia valutati mediante il punteggio del GHQ-12 > 9 (OR = 3,33, IC 95% 1,43 – 7,76). Al contrario, la nostra analisi ha confermato che un precedente parto vaginale rappresentava una caratteristica protettiva contro il dolore (OR 0,26, IC 95% 0,14 – 0,50). CONCLUSIONI Nel nostro studio alti livelli d’ansia pre-trattamento e la dismenorrea sono associati ad intensa sintomatologia dolorosa, mentre il parto vaginale è risultato protettivo. L’IVG farmacologica è una metodica efficace e sicura, ma spesso associata a sintomatologia dolorosa. È quindi fondamentale delineare fattori di predittivi di dolore ed individuare le pazienti a maggior rischio a cui somministrare un’idonea terapia antalgica.

Studio del comportamento meccanico di smalti porcellanati per substrati metallici

Composite porcelain enamels are inorganic coatings for metallic components based on a special ceramic-vitreous matrix in which specific additives are randomly dispersed. The ceramic-vitreous matrix is made by a mixture of various raw materials and elements and in particular it is based on boron-silicate glass added with metal oxides(1) of titanium, zinc, tin, zirconia, alumina, ecc. These additions are often used to improve and enhance some important performances such as corrosion(2) and wear resistance, mechanical strength, fracture toughness and also aesthetic functions. The coating process, called enamelling, depends on the nature of the surface, but also on the kind of the used porcelain enamel. For metal sheets coatings two industrial processes are actually used: one based on a wet porcelain enamel and another based on a dry-silicone porcelain enamel. During the firing process, that is performed at about 870°C in the case of a steel substrate, the enamel raw material melts and interacts with the metal substrate so enabling the formation of a continuous varying structure. The interface domain between the substrate and the external layer is made of a complex material system where the ceramic vitreous and the metal constituents are mixed. In particular four main regions can be identified, (i) the pure metal region, (ii) the region where the metal constituents are dominant compared with the ceramic vitreous components, (iii) the region where the ceramic vitreous constituents are dominant compared with the metal ones, and the fourth region (iv) composed by the pure ceramic vitreous material. It has also to be noticed the presence of metallic dendrites that hinder the substrate and the external layer passing through the interphase region. Each region of the final composite structure plays a specific role: the metal substrate has mainly the structural function, the interphase region and the embedded dendrites guarantee the adhesion of the external vitreous layer to the substrate and the external vitreous layer is characterized by an high tribological, corrosion and thermal shock resistance. Such material, due to its internal composition, functionalization and architecture can be considered as a functionally graded composite material. The knowledge of the mechanical, tribological and chemical behavior of such composites is not well established and the research is still in progress. In particular the mechanical performances data about the composite coating are not jet established. In the present work the Residual Stresses, the Young modulus and the First Crack Failure of the composite porcelain enamel coating are studied. Due to the differences of the porcelain composite enamel and steel thermal properties the enamelled steel sheets have residual stresses: compressive residual stress acts on the coating and tensile residual stress acts on the steel sheet. The residual stresses estimation has been performed by measuring the curvature of rectangular one-side coated specimens. The Young modulus and the First Crack Failure (FCF) of the coating have been estimated by four point bending tests (3-7) monitored by means of the Acoustic Emission (AE) technique(5,6). In particular the AE information has been used to identify, during the bending tests, the displacement domain over which no coating failure occurs (Free Failure Zone, FFZ). In the FFZ domain, the Young modulus has been estimated according to ASTM D6272-02. The FCF has been calculated as the ratio between the displacement at the first crack of the coating and the coating thickness on the cracked side. The mechanical performances of the tested coated specimens have also been related and discussed to respective microstructure and surface characteristics by double entry charts.

Numerical methods for the dispersion analysis of Guided Waves

The use of guided ultrasonic waves (GUW) has increased considerably in the fields of non-destructive (NDE) testing and structural health monitoring (SHM) due to their ability to perform long range inspections, to probe hidden areas as well as to provide a complete monitoring of the entire waveguide. Guided waves can be fully exploited only once their dispersive properties are known for the given waveguide. In this context, well stated analytical and numerical methods are represented by the Matrix family methods and the Semi Analytical Finite Element (SAFE) methods. However, while the former are limited to simple geometries of finite or infinite extent, the latter can model arbitrary cross-section waveguides of finite domain only. This thesis is aimed at developing three different numerical methods for modelling wave propagation in complex translational invariant systems. First, a classical SAFE formulation for viscoelastic waveguides is extended to account for a three dimensional translational invariant static prestress state. The effect of prestress, residual stress and applied loads on the dispersion properties of the guided waves is shown. Next, a two-and-a-half Boundary Element Method (2.5D BEM) for the dispersion analysis of damped guided waves in waveguides and cavities of arbitrary cross-section is proposed. The attenuation dispersive spectrum due to material damping and geometrical spreading of cavities with arbitrary shape is shown for the first time. Finally, a coupled SAFE-2.5D BEM framework is developed to study the dispersion characteristics of waves in viscoelastic waveguides of arbitrary geometry embedded in infinite solid or liquid media. Dispersion of leaky and non-leaky guided waves in terms of speed and attenuation, as well as the radiated wavefields, can be computed. The results obtained in this thesis can be helpful for the design of both actuation and sensing systems in practical application, as well as to tune experimental setup.

Analysis of the main phenomena affecting solid rocket motors internal ballistics

In solid rocket motors, the absence of combustion controllability and the large amount of financial resources involved in full-scale firing tests, increase the importance of numerical simulations in order to asses stringent mission thrust requirements and evaluate the influence of thrust chamber phenomena affecting the grain combustion. Among those phenomena, grain local defects (propellant casting inclusions and debondings), combustion heat accumulation involving pressure peaks (Friedman Curl effect), and case-insulating thermal protection material ablation affect thrust prediction in terms of not negligible deviations with respect to the nominal expected trace. Most of the recent models have proposed a simplified treatment to the problem using empirical corrective functions, with the disadvantages of not fully understanding the physical dynamics and thus of not obtaining predictive results for different configurations of solid rocket motors in a boundary conditions-varied scenario. This work is aimed to introduce different mathematical approaches to model, analyze, and predict the abovementioned phenomena, presenting a detailed physical interpretation based on existing SRMs configurations. Internal ballistics predictions are obtained with an in-house simulation software, where the adoption of a dynamic three-dimensional triangular mesh together with advanced computer graphics methods, allows the previous target to be reached. Numerical procedures are explained in detail. Simulation results are carried out and discussed based on experimental data.

Effect of host genotype and prion strain on the phenotypic heterogeneity of Creutzfeldt-Jakob disease: the peripheral nervous system involvement and the spectrum of the genetic form

The first study was designed to assess whether the involvement of the peripheral nervous system (PNS) belongs to the phenotypic spectrum of sporadic Creutzfeldt-Jakob disease (sCJD). To this aim, we reviewed medical records of 117 sCJDVV2, 65 sCJDMV2K, and 121 sCJDMM(V)1 subjects for symptoms/signs and neurophysiological data. We looked for the presence of PrPSc in postmortem PNS samples from 14 subjects by western blotting and real-time quaking-induced conversion (RT-QuIC) assay. Seventy-five (41.2%) VV2-MV2K patients, but only 11 (9.1%) MM(V)1, had symptoms/signs suggestive of PNS involvement and neuropathy was documented in half of the VV2-MV2K patients tested. RT-QuIC was positive in all PNS samples, whereas western blotting detected PrPSc in the sciatic nerve in only one VV2 and one MV2K. These results support the conclusion that peripheral neuropathy, likely related to PrPSc deposition, belongs to the phenotypic spectrum of sCJDMV2K and VV2, the two variants linked to the V2 strain. The second study aimed to characterize the genetic/molecular determinants of phenotypic variability in genetic CJD (gCJD). To this purpose, we compared 157 cases of gCJD to 300 of sCJD. We analyzed: demographic aspects, neurological symptoms/signs, histopathologic features and biochemical characteristics of PrPSc. The results strongly indicated that the clinicopathological phenotypes of gCJD largely overlap with those of sCJD and that the genotype at codon 129 in cis with the mutation (i.e. haplotype) contributes more than the latter to the disease phenotype. Some mutations, however, cause phenotypic variations including haplotype-specific patterns of PrPSc deposition such as the “dense” synaptic pattern (E200K-129M), the intraneuronal dots (E200K-129V), and the linear stripes perpendicular to the surface in the molecular layer of cerebellum (OPRIs-129M). Overall, these results suggest that in gCJD PRNP mutations do not cause the emergence of novel prion strains, but rather confer increased susceptibility to the disease in conjunction with “minor” clinicopathological variations.