Gli affidamenti c.d. in house nell'ordinamento comunitario e nazionale con particolare riferimento al settore dei trasporti pubblici

Il presente progetto di ricerca analizza quella particolare forma di affidamento diretto dei servizi pubblici denominata in house providing e si articola in tre sezioni. Nella prima sezione viene analizzata la disciplina dei servizi pubblici locali nell’ordinamento italiano mediante un excursus normativo dai primi del 900 ad oggi; la seconda sezione è dedicata alla disciplina dell’affidamento dei servizi pubblici locali di trasporto; la terza sezione, infine, descrive l’in house providing e l’elaborazione pretoria di tale istituto operata dalla giurisprudenza comunitaria. Come noto, la pubblica amministrazione può soddisfare le sue esigenze secondo due diverse modalità: ricorrendo al libero mercato come qualsiasi altro operatore economico oppure auto-producendo i beni e i servizi di cui necessita. Infatti, nonostante il diritto comunitario imponga il rispetto del principio di tutela della concorrenza, lascia impregiudicato il potere di auto-organizzazione in capo alle pubbliche amministrazioni negli Stati membri, le quali potranno scegliere di agire “in economia” o di ricorrere alle prestazioni di operatori terzi. Con la locuzione di derivazione comunitaria in house providing si definisce quel modello organizzativo mediante il quale le pubbliche amministrazioni realizzano le attività di loro competenza attraverso i propri organismi, cioè senza ricorrere al libero mercato per procurarsi i lavori, i servizi e le forniture ad esse occorrenti o per erogare alla collettività prestazioni di pubblico servizio, in deroga ai principi comunitari sulla tutela della concorrenza stabiliti nel Trattato istitutivo della Comunità Europea, che invece imporrebbero lo svolgimento di gare ad evidenza pubblica per l'affidamento di tali servizi. Tuttavia, come chiarito dalla giurisprudenza comunitaria e nazionale, affinché la procedura di gara non sia necessaria, occorre che tra l’amministrazione e il prestatore ci sia sostanziale identità, nonostante le distinte personalità giuridiche, in modo tale da configurare il contratto tra le stesse intercorso come un atto di organizzazione interna.

Advanced lithium and lithium-ion rechargeable batteries for automotive applications

The worldwide demand for a clean and low-fuel-consuming transport promotes the development of safe, high energy and power electrochemical storage and conversion systems. Lithium-ion batteries (LIBs) are considered today the best technology for this application as demonstrated by the recent interest of automotive industry in hybrid (HEV) and electric vehicles (EV) based on LIBs. This thesis work, starting from the synthesis and characterization of electrode materials and the use of non-conventional electrolytes, demonstrates that LIBs with novel and safe electrolytes and electrode materials meet the targets of specific energy and power established by U.S.A. Department of Energy (DOE) for automotive application in HEV and EV. In chapter 2 is reported the origin of all chemicals used, the description of the instruments used for synthesis and chemical-physical characterizations, the electrodes preparation, the batteries configuration and the electrochemical characterization procedure of electrodes and batteries. Since the electrolyte is the main critical point of a battery, in particular in large- format modules, in chapter 3 we focused on the characterization of innovative and safe electrolytes based on ionic liquids (characterized by high boiling/decomposition points, thermal and electrochemical stability and appreciable conductivity) and mixtures of ionic liquid with conventional electrolyte. In chapter 4 is discussed the microwave accelerated sol–gel synthesis of the carbon- coated lithium iron phosphate (LiFePO 4 -C), an excellent cathode material for LIBs thanks to its intrinsic safety and tolerance to abusive conditions, which showed excellent electrochemical performance in terms of specific capacity and stability. In chapter 5 are presented the chemical-physical and electrochemical characterizations of graphite and titanium-based anode materials in different electrolytes. We also characterized a new anodic material, amorphous SnCo alloy, synthetized with a nanowire morphology that showed to strongly enhance the electrochemical stability of the material during galvanostatic full charge/discharge cycling. Finally, in chapter 6, are reported different types of batteries, assembled using the LiFePO 4 -C cathode material, different anode materials and electrolytes, characterized by deep galvanostatic charge/discharge cycles at different C-rates and by test procedures of the DOE protocol for evaluating pulse power capability and available energy. First, we tested a battery with the innovative cathode material LiFePO 4 -C and conventional graphite anode and carbonate-based electrolyte (EC DMC LiPF 6 1M) that demonstrated to surpass easily the target for power-assist HEV application. Given that the big concern of conventional lithium-ion batteries is the flammability of highly volatile organic carbonate- based electrolytes, we made safe batteries with electrolytes based on ionic liquid (IL). In order to use graphite anode in IL electrolyte we added to the IL 10% w/w of vinylene carbonate (VC) that produces a stable SEI (solid electrolyte interphase) and prevents the graphite exfoliation phenomenon. Then we assembled batteries with LiFePO 4 -C cathode, graphite anode and PYR 14 TFSI 0.4m LiTFSI with 10% w/w of VC that overcame the DOE targets for HEV application and were stable for over 275 cycles. We also assembled and characterized ―high safety‖ batteries with electrolytes based on pure IL, PYR 14 TFSI with 0.4m LiTFSI as lithium salt, and on mixture of this IL and standard electrolyte (PYR 14 TFSI 50% w/w and EC DMC LiPF 6 50% w/w), using titanium-based anodes (TiO 2 and Li 4 Ti 5 O 12 ) that are commonly considered safer than graphite in abusive conditions. The batteries bearing the pure ionic liquid did not satisfy the targets for HEV application, but the batteries with Li 4 Ti 5 O 12 anode and 50-50 mixture electrolyte were able to surpass the targets. We also assembled and characterized a lithium battery (with lithium metal anode) with a polymeric electrolyte based on poly-ethilenoxide (PEO 20 – LiCF 3 SO 3 +10%ZrO 2 ), which satisfied the targets for EV application and showed a very impressive cycling stability. In conclusion, we developed three lithium-ion batteries of different chemistries that demonstrated to be suitable for application in power-assist hybrid vehicles: graphite/EC DMC LiPF 6 /LiFePO 4 -C, graphite/PYR 14 TFSI 0.4m LiTFSI with 10% VC/LiFePO 4 -C and Li 4 T i5 O 12 /PYR 14 TFSI 50%-EC DMC LiPF 6 50%/LiFePO 4 -C. We also demonstrated that an all solid-state polymer lithium battery as Li/PEO 20 –LiCF 3 SO 3 +10%ZrO 2 /LiFePO 4 -C is suitable for application on electric vehicles. Furthermore we developed a promising anodic material alternative to the graphite, based on SnCo amorphous alloy.