Halogenated aliphatic and aromatic aerobic biodegradation via direct metabolism and cometabolism: batch and continuous tests

In this thesis the application of biotechnological processes based on microbial metabolic degradation of halogenated compound has been investigated. Several studies showed that most of these pollutants can be biodegraded by single bacterial strains or mixed microbial population via aerobic direct metabolism or cometabolism using as a growth substrates aromatic or aliphatic hydrocarbons. The enhancement of two specific processes has been here object of study in relation with its own respective scenario described as follow: 1st) the bioremediation via aerobic cometabolism of soil contaminated by a high chlorinated compound using a mixed microbial population and the selection and isolation of consortium specific for the compound. 2nd) the implementation of a treatment technology based on direct metabolism of two pure strains at the exact point source of emission, preventing dilution and contamination of large volumes of waste fluids polluted by several halogenated compound minimizing the environmental impact. In order to verify the effect of these two new biotechnological application to remove halogenated compound and purpose them as a more efficient alternative continuous and batch tests have been set up in the experimental part of this thesis. Results obtained from the continuous tests in the second scenario have been supported by microbial analysis via Fluorescence in situ Hybridisation (FISH) and by a mathematical model of the system. The results showed that both process in its own respective scenario offer an effective solutions for the biological treatment of chlorinate compound pollution.

Fault detection, diagnosis and active fault tolerant control for a satellite attitude control system

Modern control systems are becoming more and more complex and control algorithms more and more sophisticated. Consequently, Fault Detection and Diagnosis (FDD) and Fault Tolerant Control (FTC) have gained central importance over the past decades, due to the increasing requirements of availability, cost efficiency, reliability and operating safety. This thesis deals with the FDD and FTC problems in a spacecraft Attitude Determination and Control System (ADCS). Firstly, the detailed nonlinear models of the spacecraft attitude dynamics and kinematics are described, along with the dynamic models of the actuators and main external disturbance sources. The considered ADCS is composed of an array of four redundant reaction wheels. A set of sensors provides satellite angular velocity, attitude and flywheel spin rate information. Then, general overviews of the Fault Detection and Isolation (FDI), Fault Estimation (FE) and Fault Tolerant Control (FTC) problems are presented, and the design and implementation of a novel diagnosis system is described. The system consists of a FDI module composed of properly organized model-based residual filters, exploiting the available input and output information for the detection and localization of an occurred fault. A proper fault mapping procedure and the nonlinear geometric approach are exploited to design residual filters explicitly decoupled from the external aerodynamic disturbance and sensitive to specific sets of faults. The subsequent use of suitable adaptive FE algorithms, based on the exploitation of radial basis function neural networks, allows to obtain accurate fault estimations. Finally, this estimation is actively exploited in a FTC scheme to achieve a suitable fault accommodation and guarantee the desired control performances. A standard sliding mode controller is implemented for attitude stabilization and control. Several simulation results are given to highlight the performances of the overall designed system in case of different types of faults affecting the ADCS actuators and sensors.

NLGA based Active Control in Aerospace: fault tolerability, disturbance rejection, and parameter estimation

A new control scheme has been presented in this thesis. Based on the NonLinear Geometric Approach, the proposed Active Control System represents a new way to see the reconfigurable controllers for aerospace applications. The presence of the Diagnosis module (providing the estimation of generic signals which, based on the case, can be faults, disturbances or system parameters), mean feature of the depicted Active Control System, is a characteristic shared by three well known control systems: the Active Fault Tolerant Controls, the Indirect Adaptive Controls and the Active Disturbance Rejection Controls. The standard NonLinear Geometric Approach (NLGA) has been accurately investigated and than improved to extend its applicability to more complex models. The standard NLGA procedure has been modified to take account of feasible and estimable sets of unknown signals. Furthermore the application of the Singular Perturbations approximation has led to the solution of Detection and Isolation problems in scenarios too complex to be solved by the standard NLGA. Also the estimation process has been improved, where multiple redundant measuremtent are available, by the introduction of a new algorithm, here called "Least Squares - Sliding Mode". It guarantees optimality, in the sense of the least squares, and finite estimation time, in the sense of the sliding mode. The Active Control System concept has been formalized in two controller: a nonlinear backstepping controller and a nonlinear composite controller. Particularly interesting is the integration, in the controller design, of the estimations coming from the Diagnosis module. Stability proofs are provided for both the control schemes. Finally, different applications in aerospace have been provided to show the applicability and the effectiveness of the proposed NLGA-based Active Control System.

The Making of a Shiite Bourgeoisie in Lebanon Political Mobilisation, Economic Resources and Formation of a Social Group

The thesis analyses the making of the Shiite middle- and upper/entrepreneurial-class in Lebanon from the 1960s till the present day. The trajectory explores the historical, political and social (internal and external) factors that brought a sub-proletariat to mobilise and become an entrepreneurial bourgeoisie in the span of less than three generations. This work proposes the main theoretical hypothesis to unpack and reveal the trajectory of a very recent social class that through education, diaspora, political and social mobilisation evolved in a few years into a very peculiar bourgeoisie: whereas Christian-Maronite middle class practically produced political formations and benefited from them and from Maronite’s state supremacy (National Pact, 1943) reinforcing the community’s status quo, Shiites built their own bourgeoisie from within, and mobilised their “cadres” (Boltanski) not just to benefit from their renovated presence at the state level, but to oppose to it. The general Social Movement Theory (SMT), as well as a vast amount of the literature on (middle) class formation are therefore largely contradicted, opening up new territories for discussion on how to build a bourgeoisie without the state’s support (Social Mobilisation Theory, Resource Mobilisation Theory) and if, eventually, the middle class always produces democratic movements (the emergence of a social group out of backwardness and isolation into near dominance of a political order). The middle/upper class described here is at once an economic class related to the control of multiple forms of capital, and produced by local, national, and transnational networks related to flows of services, money, and education, and a culturally constructed social location and identity structured by economic as well as other forms of capital in relation to other groups in Lebanon.

Survey on the spirilar flora of Lagomorphs

Members of the genera Campylobacter and Helicobacter have been in the spotlight in recent decades because of their status as animals and/or humans pathogens, both confirmed and emerging, and because of their association with food-borne and zoonotic diseases. First observations of spiral shaped bacteria or Campylobacter-like organisms (CLO) date back to the end of the 19th century, however the lack of adequate isolation methods hampered further research. With the introduction of methods such as selective media and a filtration procedure during the 1970s led to a renewed interest in Campylobacter, especially as this enabled elucidation of their role in human hosts. On the other hand the classification and identification of these bacteria was troublesome, mainly because of the biochemical inertness and fastidious growth requirements. In 1991, the taxonomy of Campylobacter and related organisms was thoroughly revised, since this revision several new Campylobacter and Helicobacter species have been described. Moreover, thanks to the introduction of a polyphasic taxonomic practice, the classification of these novel species is well-founded. Indeed, a polyphasic approach was here followed for characterizing eight isolates obtained from rabbits epidemiologically not correlated and as a result a new Campylobacter species was proposed: Campylobacter cuniculorum (Chapter 1). Furthermore, there is a paucity of data regarding the occurrence of spiral shaped enteric flora in leporids. In order to define the prevalence both of this new species and other CLO in leporids (chapter 2), a total of 85 whole intestinal tracts of rabbits reared in 32 farms and 29 capture hares, epidemiologically not correlated, were collected just after evisceration at the slaughterhouse or during necroscopy. Examination and isolation methods were varied in order to increase the sensibility level of detection, and 100% of rabbit farms resulted positive for C. cuniculorum in high concentrations. Moreover, in 3.53% of the total rabbits examined, a Helicobacter species was detected. Nevertheless, all hares resulted negative both for Campylobacter or Helicobacter species. High prevalence of C. cuniculorum were found in rabbits, and in order to understand if this new species could play a pathological role, a study on some virulence determinants of C. cuniculorum was conducted (Chapter 3). Although this new species were able to adhere and invade, exert cytolethal distending toxin-like effects although at a low titre, a cdtB was not detected. There was no clear relationship between source of isolation or disease manifestation and possession of statistically significantly levels of particular virulence-associated factors although, cell adhesion and invasion occurred. Furthermore, antibiotic susceptibility was studied (chapter 4) in Campylobacter and in Escherichia coli strains, isolated from rabbits. It was possible to find acquired resistance of C. cuniculorum to enrofloxacin, ciprofloxacin and erytromycin. C. coli isolate was susceptible to all antimicrobial tested and moreover it is considered as a wild-type strain. Moreover, E. coli was found at low caecal concentration in rabbits and 30 phenotypes of antibiotic resistance were founded as well as the high rate of resistances to at least one antibiotic (98.1%). The majority of resistances were found from strains belonging to intensive farming system. In conclusion, in the course of the present study a new species isolated from rabbits was described, C. cuniculorum, and its high prevalence was established. Nevertheless, in hare samples no Campylobacter and Helicobacter species were detected. Some virulence determinants were further analyzed, however further studied are needed to understand the potential pathogenicity of this new species. On the other hand, antimicrobial susceptibility was monitored both in C. cuniculorum and indicator bacteria and acquired resistance was observed towards some antibiotics, indicating a possible role of rabbitries in the diffusion of antibiotic resistance. Further studies are necessary to describe and evaluate the eventual zoonotic role of Campylobacter cuniculorum.

Development of muliplexed analytical methods based on bioluminescent whole-cell biosensors

The subject of this Ph.D. research thesis is the development and application of multiplexed analytical methods based on bioluminescent whole-cell biosensors. One of the main goals of analytical chemistry is multianalyte testing in which two or more analytes are measured simultaneously in a single assay. The advantages of multianalyte testing are work simplification, high throughput, and reduction in the overall cost per test. The availability of multiplexed portable analytical systems is of particular interest for on-field analysis of clinical, environmental or food samples as well as for the drug discovery process. To allow highly sensitive and selective analysis, these devices should combine biospecific molecular recognition with ultrasensitive detection systems. To address the current need for rapid, highly sensitive and inexpensive devices for obtaining more data from each sample,genetically engineered whole-cell biosensors as biospecific recognition element were combined with ultrasensitive bioluminescence detection techniques. Genetically engineered cell-based sensing systems were obtained by introducing into bacterial, yeast or mammalian cells a vector expressing a reporter protein whose expression is controlled by regulatory proteins and promoter sequences. The regulatory protein is able to recognize the presence of the analyte (e.g., compounds with hormone-like activity, heavy metals…) and to consequently activate the expression of the reporter protein that can be readily measured and directly related to the analyte bioavailable concentration in the sample. Bioluminescence represents the ideal detection principle for miniaturized analytical devices and multiplexed assays thanks to high detectability in small sample volumes allowing an accurate signal localization and quantification. In the first chapter of this dissertation is discussed the obtainment of improved bioluminescent proteins emitting at different wavelenghts, in term of increased thermostability, enhanced emission decay kinetic and spectral resolution. The second chapter is mainly focused on the use of these proteins in the development of whole-cell based assay with improved analytical performance. In particular since the main drawback of whole-cell biosensors is the high variability of their analyte specific response mainly caused by variations in cell viability due to aspecific effects of the sample’s matrix, an additional bioluminescent reporter has been introduced to correct the analytical response thus increasing the robustness of the bioassays. The feasibility of using a combination of two or more bioluminescent proteins for obtaining biosensors with internal signal correction or for the simultaneous detection of multiple analytes has been demonstrated by developing a dual reporter yeast based biosensor for androgenic activity measurement and a triple reporter mammalian cell-based biosensor for the simultaneous monitoring of two CYP450 enzymes activation, involved in cholesterol degradation, with the use of two spectrally resolved intracellular luciferases and a secreted luciferase as a control for cells viability. In the third chapter is presented the development of a portable multianalyte detection system. In order to develop a portable system that can be used also outside the laboratory environment even by non skilled personnel, cells have been immobilized into a new biocompatible and transparent polymeric matrix within a modified clear bottom black 384 -well microtiter plate to obtain a bioluminescent cell array. The cell array was placed in contact with a portable charge-coupled device (CCD) light sensor able to localize and quantify the luminescent signal produced by different bioluminescent whole-cell biosensors. This multiplexed biosensing platform containing whole-cell biosensors was successfully used to measure the overall toxicity of a given sample as well as to obtain dose response curves for heavy metals and to detect hormonal activity in clinical samples (PCT/IB2010/050625: “Portable device based on immobilized cells for the detection of analytes.” Michelini E, Roda A, Dolci LS, Mezzanotte L, Cevenini L , 2010). At the end of the dissertation some future development steps are also discussed in order to develop a point of care (POCT) device that combine portability, minimum sample pre-treatment and highly sensitive multiplexed assays in a short assay time. In this POCT perspective, field-flow fractionation (FFF) techniques, in particular gravitational variant (GrFFF) that exploit the earth gravitational field to structure the separation, have been investigated for cells fractionation, characterization and isolation. Thanks to the simplicity of its equipment, amenable to miniaturization, the GrFFF techniques appears to be particularly suited for its implementation in POCT devices and may be used as pre-analytical integrated module to be applied directly to drive target analytes of raw samples to the modules where biospecifc recognition reactions based on ultrasensitive bioluminescence detection occurs, providing an increase in overall analytical output.

Sviluppo dei materiali innovativi e studio della loro interazione con sistemi biologici e biomimetici

Nell’ambito della Chimica Sostenibile e dell’applicazione dei suoi principi per la salvaguardia dell’ambiente, il progetto di dottorato ha riguardato lo sviluppo di materiali innovativi e lo studio della loro interazione con sistemi biologici e biomimetici. In particolare l’attività si è focalizzata sulla sintesi di liquidi ionici ed indagini delle interazioni con membrane cellulari e sull’utilizzo ed isolamento di molecole da fonti rinnovabili. I liquidi ionici sono sali organici liquidi a temperature inferiori ai 100 °C; sono considerati promettenti solventi a ridotta tossicità, ma vanno chiarite a pieno le modalità di interazione con i sistemi biologici ed i meccanismi di tossicità. A questo scopo è stata impiegata una batteria di test bio-chimici, con saggi di fluorescenza e colorimetrici, che hanno permesso di discriminare le diverse tipologie di interazioni con varie strutture di membrana. Le informazioni raccolte sono servite per progettare sostanze meno dannose per le strutture cellulari, al fine di scegliere le funzionalità molecolari che consentano ai liquidi ionici di mantenere la loro attività ma di essere meno dannosi per l’ambiente. Per quanto riguarda l’utilizzo ed isolamento di molecole da fonte rinnovabili, si è utilizzata la tecnica della pirolisi per l’ottenimento di starting materials ed il loro impiego nella sintesi di chemicals in alternativa a composti derivanti da fonti fossili. La pirolisi tradizionale della cellulosa fornisce una molecola interessante, per semplicità denominata LAC, in quantità insufficienti ad un uso applicativo. Nell’ambito delle ricerche svolte è stato scoperto che la pirolisi condotta in presenza di catalizzatori meso-strutturati (MCM-41) drogati con metalli di transizione, fornisce buone quantità di LAC. LAC si è dimostrato promettente sia per la produzione di nuove molecole con possibili applicazioni nella chimica fine e farmaceutica, che come monomero per nuovi polimeri (copolimero ed omopolimero).

Circulating Endothelial Progenitor Cells: isolation and biological characterization of EPCs from healthy subjects and nephropatic patients

Nel 1997 venne isolata una popolazione cellulare con caratteristiche appartenenti a cellule endoteliali mature e a cellule progenitrici ; le cellule appartenenti a queste popolazione furono denominate EPCs (cellule endoteliali progenitrici circolanti) e fu messa in evidenza la loro capacità di dare origine a vasculogenesi postnatale. Lo scopo dello studio è stata la caratterizzazione di tale popolazione cellulare in termini biologici e la valutazione delle differenze delle EPCs in soggetti sani e nefropatici in emodialisi. È stata infine valutata l’eventuale capacità della Vitamina D di influenzare le capacità delle Late EPCs in termini di formazione di colonie in vitro e di attività anticalcifica in soggetti in insufficienza renale cronica.