What Happened to Participation? Urban Development and Authoritarian Upgrading in Cairo's Informal Neighbourhoods

Participation appeared in development discourses for the first time in the 1970s, as a generic call for the involvement of the poor in development initiatives. Over the last three decades, the initial perspectives on participation intended as a project method for poverty reduction have evolved into a coherent and articulated theoretical elaboration, in which participation figures among the paraphernalia of good governance promotion: participation has acquired the status of “new orthodoxy”. Nevertheless, the experience of the implementation of participatory approaches in development projects seemed to be in the majority of cases rather disappointing, since the transformative potential of ‘participation in development’ depends on a series of factors in which every project can actually differ from others: the ultimate aim of the approach promoted, its forms and contents and, last but not least, the socio-political context in which the participatory initiative is embedded. In Egypt, the signature of a project agreement between the Arab Republic of Egypt and the Federal Republic of Germany, in 1998, inaugurated a Participatory Urban Management Programme (PUMP) to be implemented in Greater Cairo by the German Technical Cooperation (Deutsche Gesellschaft für Technische Zusammenarbeit, GTZ) and the Ministry of Planning (now Ministry of Local Development) and the Governorates of Giza and Cairo as the main counterparts. Now, ten years after the beginning of the PUMP/PDP and close to its end (December 2010), it is possible to draw some conclusions about the scope, the significance and the effects of the participatory approach adopted by GTZ and appropriated by the Egyptian counterparts in dealing with the issue of informal areas and, more generally, of urban development. Our analysis follows three sets of questions: the first set regards the way ‘participation’ has been interpreted and concretised by PUMP and PDP. The second is about the emancipating potential of the ‘participatory approach’ and its ability to ‘empower’ the ‘marginalised’. The third focuses on one hand on the efficacy of GTZ strategy to lead to an improvement of the delivery service in informal areas (especially in terms of planning and policies), and on the other hand on the potential of GTZ development intervention to trigger an incremental process of ‘democratisation’ from below.

Politiche di sviluppo e questione etnica. La cooperazione italiana IN Bosnia Erzegovina

The globalization process of the last twenty years has changed the world through international flows of people, policies and practices. International cooperation to development is a part of that process and brought International Organizations (IOs) and Non Governmental Organizations (NGOs) from the West to the rest of the world. In my thesis I analyze the Italian NGOs that worked in Bosnia Herzegovina (BH) to understand which development projects they realized and how they faced the ethnic issue that characterized BH. I consider the relation shaped between Italian NGOs and Bosnian civil society as an object of ethnic interests. In BH, once part of former Yugoslavia, the transition from the communist regime to a democratic country has not been completed. BH’s social conditions are characterized by strong ethnic divisions. The legacy of the early 1990s crisis was a phenomenon of ethnic identities created before the war and that still endure today. The Dayton Peace Agreement signed in 1995 granted the peace and reinforced the inter-ethnic hate between the newly recognized three principal ethnicities: Serbs, Croats and Bosniak. Through the new constitution, the institutions were characterized by division at every level, from the top to the bottom of society. Besides it was the first constitution ever written and signed outside the own country; that was the root of the state of exception that characterized BH. Thus ethnic identities culture survived through the international political involvement. At the same time ethnic groups that dominated the political debate clashed with the international organization’s democratic purpose to build a multicultural and democratic state. Ethnic and also religious differences were the instruments for a national statement that might cause the transition and development projects failure. Fifteen years later social fragmentation was still present and it established an atmosphere of daily cultural violence. Civil society suffered this condition and attended to recreate the ethnic fragmentation in every day life. Some cities became physically divided and other cities don’t tolerated the minority presence. In rural areas, the division was more explicit, from village to village, without integration. In my speech, the anthropology for development – the derivative study from applied anthropology – constitutes the point of view that I used to understand how ethnic identities still influenced the development process in BH. I done ethnographic research about the Italian cooperation for development projects that were working there in 2007. The target of research were the Italian NGOs that created a relation with Bosnian civil society; they were almost twenty divided in four main field of competences: institutional building, education, agriculture and democratization. I assumed that NGOs work needed a deep study because the bottom of society is the place where people could really change their representation and behavior. Italian NGOs operated in BH with the aim of creating sustainable development. They found cultural barricade that both institutions and civil society erected when development projects have been applied. Ethnic and religious differences were stressed to maintain boundaries and fragmented power. Thus NGOs tried to negotiate development projects by social integration. I found that NGOs worked among ethnic groups by pursuing a new integration. They often gained success among people; civil society was ready to accept development projects and overcome differences. On the other hand NGOs have been limited by political level that sustained the ethnic talk and by their representation of Bosnian issue. Thus development policies have been impeded by ethnic issue and by cooperation practices established on a top down perspective. Paradoxically, since international community has approved the political ethnic division within DPA, then the willing of development followed by funding NGOs cooperation projects was not completely successful.

Il concetto di sezione nel metodo compositivo di Aldo Rossi.

Purpose of this research is to deepen the study on the section in architecture. The survey aims as important elements in the project Teatro Domestico by Aldo Rossi built for the XVII Triennale di Milano in 1986 and, through the implementation on several topics of architecture, verify the timeliness and fertility in the new compositional exercises. Through the study of certain areas of the Rossi’s theory we tried to find a common thread for the reading of the theater project. The theater is the place of the ephemeral and the artificial, which is why his destiny is the end and the fatal loss. The design and construction of theater setting has always had a double meaning between the value of civil architecture and testing of new technologies available. Rossi's experience in this area are clear examples of the inseparable relationship between the representation of architecture as art and design of architecture as a model of reality. In the Teatro Domestico, the distinction between representation and the real world is constantly canceled and returned through the reversal of the meaning and through the skip of scale. At present, studies conducted on the work of Rossi concern the report that the architectural composition is the theory of form, focusing compositional development of a manufacturing process between the typological analysis and form invention. The research, through the analysis of some projects few designs, will try to analyze this issue through the rules of composition both graphical and concrete construction, hoping to decipher the mechanism underlying the invention. The almost total lack of published material on the project Teatro Domestico and the opportunity to visit the archives that preserve the drawings, has allowed the author of this study to deepen the internal issues in the project, thus placing this search as a first step toward possible further analysis on the works of Rossi linked to performance world. The final aim is therefore to produce material that can best describe the work of Rossi. Through the reading of the material published by the same author and the vision of unpublished material preserved in the archives, it was possible to develop new material and increasing knowledge about the work, otherwise difficult to analyze. The research is divided into two groups. The first, taking into account the close relationship most frequently mentioned by Rossi himself between archeology and architectural composition, stresses the importance of tipo such as urban composition reading system as well as open tool of invention. Resuming Ezio Bonfanti’s essay on the work of the architect we wanted to investigate how the paratactic method is applied to the early work conceived and, subsequently as the process reaches a complexity accentuated, while keeping stable the basic terms. Following a brief introduction related to the concept of the section and the different interpretations that over time the term had, we tried to identify with this facility a methodology for reading Rossi’s projects. The result is a constant typological interpretation of the term, not only related to the composition in plant but also through the elevation plans. The section is therefore intended as the overturning of such elevation is marked on the same plane of the terms used, there is a different approach, but a similarity of characters. The identification of architectural phonemes allows comparison with other arts. The research goes in the direction of language trying to identify the relationship between representation and construction, between the ephemeral and the real world. In this sense it will highlight the similarities between the graphic material produced by Ross and some important examples of contemporary author. The comparison between the composition system with the surrealist world of painting and literature will facilitate the understanding and identification of possible rules applied by Rossi. The second part of the research is characterized by a focus on the intent of the project chosen. Teatro Domestico embodies a number of elements that seem to conclude (assuming an end point but also to start) a curriculum author. With it, the experiments carried out on the theater started with the project for the Teatrino Scientifico (1978) through the project for the Teatro del Mondo (1979), into a Laic Tabernacle representative collective and private memory of the city. Starting from a reading of the draft, through the collection of published material, we’ve made an analysis on the explicit themes of the work, finding the conceptual references. Following the taking view of the original materials not published kept at Aldo Rossi's Archive Collection of the Canadian Center for Architecture in Montréal, will be implemented through the existing techniques for digital representation, a virtual reconstruction of the project, adding little to the material, a new element for future studies. The reconstruction is part of a larger research studies where the current technologies of composition and representation in architecture stand side by side with research on the method of composition of this architect. The results achieved are in addition to experiences in the past dealt with the reconstruction of some of the lost works of Aldo Rossi. A partial objective is to reactivate a discourse around this work is considered non-principal, among others born in the prolific activities. Reassessment of development projects which would bring the level of ephemeral works most frequented by giving them the value earned. In conclusion, the research aims to open a new field of interest on the part not only as a technical instrument of representation of an idea but as an actual mechanism through which composition is formed and the idea is developed.

Catalytic liquid- and gas-phase oxidations for the synthesis of intermediates and specialty chemicals: some examples of industrial relevance

Nowadays, it is clear that the target of creating a sustainable future for the next generations requires to re-think the industrial application of chemistry. It is also evident that more sustainable chemical processes may be economically convenient, in comparison with the conventional ones, because fewer by-products means lower costs for raw materials, for separation and for disposal treatments; but also it implies an increase of productivity and, as a consequence, smaller reactors can be used. In addition, an indirect gain could derive from the better public image of the company, marketing sustainable products or processes. In this context, oxidation reactions play a major role, being the tool for the production of huge quantities of chemical intermediates and specialties. Potentially, the impact of these productions on the environment could have been much worse than it is, if a continuous efforts hadn’t been spent to improve the technologies employed. Substantial technological innovations have driven the development of new catalytic systems, the improvement of reactions and process technologies, contributing to move the chemical industry in the direction of a more sustainable and ecological approach. The roadmap for the application of these concepts includes new synthetic strategies, alternative reactants, catalysts heterogenisation and innovative reactor configurations and process design. Actually, in order to implement all these ideas into real projects, the development of more efficient reactions is one primary target. Yield, selectivity and space-time yield are the right metrics for evaluating the reaction efficiency. In the case of catalytic selective oxidation, the control of selectivity has always been the principal issue, because the formation of total oxidation products (carbon oxides) is thermodynamically more favoured than the formation of the desired, partially oxidized compound. As a matter of fact, only in few oxidation reactions a total, or close to total, conversion is achieved, and usually the selectivity is limited by the formation of by-products or co-products, that often implies unfavourable process economics; moreover, sometimes the cost of the oxidant further penalizes the process. During my PhD work, I have investigated four reactions that are emblematic of the new approaches used in the chemical industry. In the Part A of my thesis, a new process aimed at a more sustainable production of menadione (vitamin K3) is described. The “greener” approach includes the use of hydrogen peroxide in place of chromate (from a stoichiometric oxidation to a catalytic oxidation), also avoiding the production of dangerous waste. Moreover, I have studied the possibility of using an heterogeneous catalytic system, able to efficiently activate hydrogen peroxide. Indeed, the overall process would be carried out in two different steps: the first is the methylation of 1-naphthol with methanol to yield 2-methyl-1-naphthol, the second one is the oxidation of the latter compound to menadione. The catalyst for this latter step, the reaction object of my investigation, consists of Nb2O5-SiO2 prepared with the sol-gel technique. The catalytic tests were first carried out under conditions that simulate the in-situ generation of hydrogen peroxide, that means using a low concentration of the oxidant. Then, experiments were carried out using higher hydrogen peroxide concentration. The study of the reaction mechanism was fundamental to get indications about the best operative conditions, and improve the selectivity to menadione. In the Part B, I explored the direct oxidation of benzene to phenol with hydrogen peroxide. The industrial process for phenol is the oxidation of cumene with oxygen, that also co-produces acetone. This can be considered a case of how economics could drive the sustainability issue; in fact, the new process allowing to obtain directly phenol, besides avoiding the co-production of acetone (a burden for phenol, because the market requirements for the two products are quite different), might be economically convenient with respect to the conventional process, if a high selectivity to phenol were obtained. Titanium silicalite-1 (TS-1) is the catalyst chosen for this reaction. Comparing the reactivity results obtained with some TS-1 samples having different chemical-physical properties, and analyzing in detail the effect of the more important reaction parameters, we could formulate some hypothesis concerning the reaction network and mechanism. Part C of my thesis deals with the hydroxylation of phenol to hydroquinone and catechol. This reaction is already industrially applied but, for economical reason, an improvement of the selectivity to the para di-hydroxilated compound and a decrease of the selectivity to the ortho isomer would be desirable. Also in this case, the catalyst used was the TS-1. The aim of my research was to find out a method to control the selectivity ratio between the two isomers, and finally to make the industrial process more flexible, in order to adapt the process performance in function of fluctuations of the market requirements. The reaction was carried out in both a batch stirred reactor and in a re-circulating fixed-bed reactor. In the first system, the effect of various reaction parameters on catalytic behaviour was investigated: type of solvent or co-solvent, and particle size. With the second reactor type, I investigated the possibility to use a continuous system, and the catalyst shaped in extrudates (instead of powder), in order to avoid the catalyst filtration step. Finally, part D deals with the study of a new process for the valorisation of glycerol, by means of transformation into valuable chemicals. This molecule is nowadays produced in big amount, being a co-product in biodiesel synthesis; therefore, it is considered a raw material from renewable resources (a bio-platform molecule). Initially, we tested the oxidation of glycerol in the liquid-phase, with hydrogen peroxide and TS-1. However, results achieved were not satisfactory. Then we investigated the gas-phase transformation of glycerol into acrylic acid, with the intermediate formation of acrolein; the latter can be obtained by dehydration of glycerol, and then can be oxidized into acrylic acid. Actually, the oxidation step from acrolein to acrylic acid is already optimized at an industrial level; therefore, we decided to investigate in depth the first step of the process. I studied the reactivity of heterogeneous acid catalysts based on sulphated zirconia. Tests were carried out both in aerobic and anaerobic conditions, in order to investigate the effect of oxygen on the catalyst deactivation rate (one main problem usually met in glycerol dehydration). Finally, I studied the reactivity of bifunctional systems, made of Keggin-type polyoxometalates, either alone or supported over sulphated zirconia, in this way combining the acid functionality (necessary for the dehydrative step) with the redox one (necessary for the oxidative step). In conclusion, during my PhD work I investigated reactions that apply the “green chemistry” rules and strategies; in particular, I studied new greener approaches for the synthesis of chemicals (Part A and Part B), the optimisation of reaction parameters to make the oxidation process more flexible (Part C), and the use of a bioplatform molecule for the synthesis of a chemical intermediate (Part D).

Development of glass-ceramics from combination of industrial wastes together with boron mining waste

The utilization of borate mineral wastes with glass-ceramic technology was first time studied and primarily not investigated combinations of wastes were incorporated into the research. These wastes consist of; soda lime silica glass, meat bone and meal ash and fly ash. In order to investigate possible and relevant application areas in ceramics, kaolin clay, an essential raw material for ceramic industry was also employed in some studied compositions. As a result, three different glass-ceramic articles obtained by using powder sintering method via individual sintering processes. Light weight micro porous glass-ceramic from borate mining waste, meat bone and meal ash and kaolin clay was developed. In some compositions in related study, soda lime silica glass waste was used as an additive providing lightweight structure with a density below 0.45 g/cm3 and a crushing strength of 1.8±0.1 MPa. In another study within the research, compositions respecting the B2O3–P2O5–SiO2 glass-ceramic ternary system were prepared from; borate wastes, meat bone and meal ash and soda lime silica glass waste and sintered up to 950ºC. Low porous, highly crystallized glass-ceramic structures with density ranging between 1.8 ± 0,7 to 2.0 ± 0,3 g/cm3 and tensile strength ranging between 8,0 ± 2 to 15,0 ± 0,5 MPa were achieved. Lastly, diopside - wollastonite (SiO2-Al2O3-CaO )glass-ceramics from borate wastes, fly ash and soda lime silica glass waste were successfully obtained with controlled rapid sintering between 950 and 1050ºC. The wollastonite and diopside crystal sizes were improved by adopting varied combinations of formulations and heating rates. The properties of the obtained materials show; the articles with a uniform pore structure could be useful for thermal and acoustic insulations and can be embedded in lightweight concrete where low porous glass-ceramics can be employed as building blocks or additive in cement and ceramic industries.

Sustainable processes using heterogeneous acid catalysts. Some examples of industrial interest.

In recent years the need for the design of more sustainable processes and the development of alternative reaction routes to reduce the environmental impact of the chemical industry has gained vital importance. Main objectives especially regard the use of renewable raw materials, the exploitation of alternative energy sources, the design of inherently safe processes and of integrated reaction/separation technologies (e.g. microreactors and membranes), the process intensification, the reduction of waste and the development of new catalytic pathways. The present PhD thesis reports results derived during a three years research period at the School of Chemical Sciences of Alma Mater Studiorum-University of Bologna, Dept. of Industrial Chemistry and Materials (now Dept. of Industrial Chemistry “Toso Montanari”), under the supervision of Prof. Fabrizio Cavani (Catalytic Processes Development Group). Three research projects in the field of heterogeneous acid catalysis focused on potential industrial applications were carried out. The main project, regarding the conversion of lignocellulosic materials to produce monosaccharides (important intermediates for production of biofuels and bioplatform molecules) was financed and carried out in collaboration with the Italian oil company eni S.p.A. (Istituto eni Donegani-Research Center for non-Conventional Energies, Novara, Italy) The second and third academic projects dealt with the development of green chemical processes for fine chemicals manufacturing. In particular, (a) the condensation reaction between acetone and ammonia to give triacetoneamine (TAA), and (b) the Friedel-Crafts acylation of phenol with benzoic acid were investigated.