CT perfusion image processing: analysis of liver tumors

Perfusion CT imaging of the liver has potential to improve evaluation of tumour angiogenesis. Quantitative parameters can be obtained applying mathematical models to Time Attenuation Curve (TAC). However, there are still some difficulties for an accurate quantification of perfusion parameters due, for example, to algorithms employed, to mathematical model, to patient’s weight and cardiac output and to the acquisition system. In this thesis, new parameters and alternative methodologies about liver perfusion CT are presented in order to investigate the cause of variability of this technique. Firstly analysis were made to assess the variability related to the mathematical model used to compute arterial Blood Flow (BFa) values. Results were obtained implementing algorithms based on “ maximum slope method” and “Dual input one compartment model” . Statistical analysis on simulated data demonstrated that the two methods are not interchangeable. Anyway slope method is always applicable in clinical context. Then variability related to TAC processing in the application of slope method is analyzed. Results compared with manual selection allow to identify the best automatic algorithm to compute BFa. The consistency of a Standardized Perfusion Index (SPV) was evaluated and a simplified calibration procedure was proposed. At the end the quantitative value of perfusion map was analyzed. ROI approach and map approach provide related values of BFa and this means that pixel by pixel algorithm give reliable quantitative results. Also in pixel by pixel approach slope method give better results. In conclusion the development of new automatic algorithms for a consistent computation of BFa and the analysis and definition of simplified technique to compute SPV parameter, represent an improvement in the field of liver perfusion CT analysis.

Aureobasidium pullulans as biological control agent: modes of action

The postharvest phase has been considered an environment very suitable for successful application of biological control agents (BCAs). However, the tri-interaction between fungal pathogen, host (fruit) and antagonist is influenced by several parameters such as temperature, oxidative stresses, oxygen composition, water activity, etc. that could be determining for the success of biocontrol. Knowledge of the modes of action of BCAs is essential in order to enhance their viability and increase their potentialities in disease control. The thesis focused on the possibility to explain the modes of action of a biological control agent (BCA): Aureobasidium pullulans, in particular the strains L1 and L8, control effective against fruit postharvest fungal pathogen. In particular in this work were studied the different modes of action of BCA, such as: i) the ability to produce volatile organic compounds (VOCs), identified by SPME- gas chromatography-mass spectrometry (GC-MS) and tested by in vitro and in vivo assays against Penicillium spp., Botrytis cinerea, Colletotrichum acutatum; ii) the ability to produce lytic enzymes (exo and endo chitinase and β-1,3-glucanase) tested against Monilinia laxa, causal agent of brown rot of stone fruits. L1 and L8 lytic enzymes were also evaluated through their relative genes by molecular tools; iii) the competition for space and nutrients, such as sugars (sucrose, glucose and fructose) and iron; the latter induced the production of siderophores, molecules with high affinity for iron chelation. A molecular investigation was carried out to better understand the gene regulation strictly correlated to the production of these chelating molucules. The competition for space against M. laxa was verified by electron microscopy techniques; iv) a depth bibliographical analysis on BCAs mechanisms of action and their possible combination with physical and chemical treatments was conducted.

The Perception of American Adolescent Culture Through the Dubbing and Fansubbing of a Selection of US Teen Series from 1990 to 2013

The present dissertation aims at analyzing the construction of American adolescent culture through teen-targeted television series and the shift in perception that occurs as a consequence of the translation process. In light of the recent changes in television production and consumption modes, largely caused by new technologies, this project explores the evolution of Italian audiences, focusing on fansubbing (freely distributed amateur subtitles made by fans for fan consumption) and social viewing (the re-aggregation of television consumption based on social networks and dedicated platforms, rather than on physical presence). These phenomena are symptoms of a sort of ‘viewership 2.0’ and of a new type of active viewing, which calls for a revision of traditional AVT strategies. Using a framework that combines television studies, new media studies, and fandom studies with an approach to AVT based on Descriptive Translation Studies (Toury 1995), this dissertation analyzes the non-Anglophone audience’s growing need to participation in the global dialogue and appropriation process based on US scheduling and informed by the new paradigm of convergence culture, transmedia storytelling, and affective economics (Jenkins 2006 and 2007), as well as the constraints intrinsic to multimodal translation and the different types of linguistic and cultural adaptation performed through dubbing (which tends to be more domesticating; Venuti 1995) and fansubbing (typically more foreignizing). The study analyzes a selection of episodes from six of the most popular teen television series between 1990 and 2013, which has been divided into three ages based on the different modes of television consumption: top-down, pre-Internet consumption (Beverly Hills, 90210, 1990 – 2000), emergence of audience participation (Buffy the Vampire Slayer, 1997 – 2003; Dawson’s Creek, 1998 – 2003), age of convergence and Viewership 2.0 (Gossip Girl, 2007 – 2012; Glee, 2009 – present; The Big Bang Theory, 2007 - present).

Mode-I fracture parameters of quasi-brittle materials: direct evaluation using DIC and relationship with Mode-II interfacial parameters

The objective of this thesis is the investigation of the Mode-I fracture mechanics parameters of quasi-brittle materials to shed light onto the influence of the width and size of the specimen on the fracture response of notched beams. To further the knowledge on the fracture process, 3D digital image correlation (DIC) was employed. A new method is proposed to determine experimentally the critical value of the crack opening, which is then used to determine the size of the fracture process zone (FPZ). In addition, the Mode-I fracture mechanics parameters are compared with the Mode-II interfacial properties of composites materials that feature as matrices the quasi-brittle materials studied in Mode-I conditions. To investigate the Mode II fracture parameters, single-lap direct shear tests are performed. Notched concrete beams with six cross-sections has been tested using a three-point bending (TPB) test set-up (Mode-I fracture mechanics). Two depths and three widths of the beam are considered. In addition to concrete beams, alkali-activated mortar beams (AAMs) that differ by the type and size of the aggregates have been tested using the same TPB set-up. Two dimensions of AAMs are considered. The load-deflection response obtained from DIC is compared with the load-deflection response obtained from the readings of two linear variable displacement transformers (LVDT). Load responses, peak loads, strain profiles along the ligament from DIC, fracture energy and failure modes of TPB tests are discussed. The Mode-II problem is investigated by testing steel reinforced grout (SRG) composites bonded to masonry and concrete elements under single-lap direct shear tests. Two types of anchorage systems are proposed for SRG reinforced masonry and concrete element to study their effectiveness. An indirect method is proposed to find the interfacial properties, compare them with the Mode-I fracture properties of the matrix and to model the effect of the anchorage.

GÉOARCHÉOLOGIE DU VILLAGE: Variabilité des modes d’occupation de la fin du Néolithique à l’âge du Bronze en Italie et en France méridionale. Implications culturelles

Entre la fin du Néolithique et l’âge du Bronze, la présence d’habitats groupés de type village est un phénomène diffus, tant en Italie qu’en France méridionale. Néanmoins, la prise en compte de la variabilité des formes de la stratification des sites interroge. En quoi l’enregistrement sédimentaire des sols d’habitat permet-il d’appréhender la question de l’organisation villageoise et de sa variabilité entre la fin du Néolithique et l’âge du Bronze ? Quelle image cet enregistrement sédimentaire donne-t-il de l’organisation sociale et économique du village ? Afin d’aborder ces questions, nous avons choisi de mener une étude géoarchéologique sur des sites de formes différentes, issus de contextes chrono-culturels et environnementaux variés. La démarche, fondée sur l’emploi de la micromorphologie des sols en tant qu’outil analytique, vise à caractériser l’organisation spatio-temporelle des sols d’occupation à l’échelle du site, selon une approche spatiale des processus de formation de la stratification archéologique. L’élaboration d’un modèle, qui repose sur une classification des micro-faciès sédimentaires selon le système d’activité, et son application à des sites-laboratoires permettent de qualifier les techniques de construction en terre, l’usage du sol et les dynamiques d’occupation propres à chaque site, dans le but de déterminer les comportements socio-économiques et les spécificités du mode de vie villageois enregistrées par les sols. Cette approche permet d’évaluer les constantes et les variables qui qualifient les différents types d’occupation. Le sol, conçu comme matérialité de l’espace villageois, devient ainsi un témoignage direct de la variabilité culturelle et des différentes formes d’organisation des communautés de la fin du Néolithique et de l’âge du Bronze.