Modelling the effects of nitrogen deposition and carbon dioxide enrichment on forest carbon balance

Atmospheric CO2 concentration ([CO2]) has increased over the last 250 years, mainly due to human activities. Of total anthropogenic emissions, almost 31% has been sequestered by the terrestrial biosphere. A considerable contribution to this sink comes from temperate and boreal forest ecosystems of the northern hemisphere, which contain a large amount of carbon (C) stored as biomass and soil organic matter. Several potential drivers for this forest C sequestration have been proposed, including increasing atmospheric [CO2], temperature, nitrogen (N) deposition and changes in management practices. However, it is not known which of these drivers are most important. The overall aim of this thesis project was to develop a simple ecosystem model which explicitly incorporates our best understanding of the mechanisms by which these drivers affect forest C storage, and to use this model to investigate the sensitivity of the forest ecosystem to these drivers. I firstly developed a version of the Generic Decomposition and Yield (G’DAY) model to explicitly investigate the mechanisms leading to forest C sequestration following N deposition. Specifically, I modified the G’DAY model to include advances in understanding of C allocation, canopy N uptake, and leaf trait relationships. I also incorporated a simple forest management practice subroutine. Secondly, I investigated the effect of CO2 fertilization on forest productivity with relation to the soil N availability feedback. I modified the model to allow it to simulate short-term responses of deciduous forests to environmental drivers, and applied it to data from a large-scale forest Free-Air CO2 Enrichment (FACE) experiment. Finally, I used the model to investigate the combined effects of recent observed changes in atmospheric [CO2], N deposition, and climate on a European forest stand. The model developed in my thesis project was an effective tool for analysis of effects of environmental drivers on forest ecosystem C storage. Key results from model simulations include: (i) N availability has a major role in forest ecosystem C sequestration; (ii) atmospheric N deposition is an important driver of N availability on short and long time-scales; (iii) rising temperature increases C storage by enhancing soil N availability and (iv) increasing [CO2] significantly affects forest growth and C storage only when N availability is not limiting.

Recognizing cultural concepts: Joyce, Woolf, Mann and Musil

The purpose of this thesis is to establish a direct relationship between literature and fields of knowledge such as science and technology, by focusing on some concepts that were fundamental for both science and the humanities at the beginning of the 20th century. The concepts are those of simultaneity, multiple points of view, map, relativity and acausality. In the spirit of several recent ideas, for example Katherine Hayles’ isomorphism notion, the dissertation shows how writers such as James Joyce, Virginia Woolf, Thomas Mann and Robert Musil developed the mentioned concepts within their narratives. The working hypothesis is that those concepts were at a crossroad of human activities, and that those authors used them extensively within their narratives. It is further argued that those same concepts – as developed by Joyce in Ulysses, Woolf’s shorts stories and novels from the end of the 1910’s until the end of the1920’s, Mann’s Der Zauberberg (The Magic Mountain), and Musil’s Der Mann ohne Eigenschaften (The Man Without Qualities) — are still fundamental for our conception of time and space today. The thesis is divided into two parts. The first two chapters will analyse the concepts of simultaneity and multiple points of view and their relationship to cartography as developed within English literature and culture. The next two chapters will address the concepts of relativity and acausality, as developed within German literature and culture.

Rituali indigeni in Mesoamerica. La festa di Petición de Lluvias nella Montaña di Guerrero (Messico)

Questa tesi di carattere antropologico in ambito dottorale riguarda i rituali comunitari nelle comunità indigene messicane. Il principale oggetto della ricerca è il rituale della pioggia o di Petición de Lluvia, caratterizzato sia dal sacrificio animale che da una specifica relazione di causa-effetto con l’ambiente circostante. La ricerca etnografica è cominciata dall’ipotesi di voler verificare la persistenza nel tempo, e dunque nell’attualità, di procedure cerimoniali non appartenenti, almeno nella loro forma più lineare, alla religione cattolico-cristiana. Il luogo nel quale è avvenuta tale ricerca è la regione La Montaña di Guerrero, situata nel Messico sud-occidentale, e più precisamente la zona in cui vivono le comunità di etnia Nahua di San Pedro Petlacala, Acuilpa, e Xalpatláhuac che si trovano nelle vicinanze della cittadina di Tlapa de Comonfort. In un contesto ambientale profondamente rurale come quello della Montaña di Guerrero, la persistenza dei rituali evidenzia come le risorse naturali e gli agenti atmosferici - pioggia, vento, nubi - continuino a rappresentare gli elementi centrali che condizionano le variabili economiche di sussistenza e della riproduzione sociale. Il rituale di Petición de Lluvia rappresenta il momento di congiunzione tra la stagione secca e quella piovosa, tra la semina ed il raccolto del mais. Definito come una pratica religiosa nella quale il gruppo si identifica e partecipa con varie donazioni (ofrenda o deposito rituale), suddivisibili in alimenti/oggetti/preghiere ed azioni rituali, la cerimonia esprime l’auspicio di piogge abbondanti, con le quali irrigare i campi e continuare le attività umane. Il destinatario dell’offerta è la stessa divinità della pioggia, Tlaloc per le antiche civiltà mesoamericane, invocato sotto le mentite spoglie del santo patrono del 25 aprile, San Marcos. Il rituale è contraddistinto per tutta la sua durata dalla presenza del principale specialista religioso, sacerdote in lingua spagnola oppure «Tlahmáquetl» in lingua náhuatl.

Effects of Resources Exploitation on Water Quality: case studies in Salt Water Intrusion and Acid Mine Drainage

Throughout the world, pressures on water resources are increasing, mainly as a result of human activity. Because of their accessibility, groundwater and surface water are the most used reservoirs. The evaluation of the water quality requires the identification of the interconnections among the water reservoirs, natural landscape features, human activities and aquatic health. This study focuses on the estimation of the water pollution linked to two different environmental issues: salt water intrusion and acid mine drainage related to the exploitation of natural resources. Effects of salt water intrusion occurring in the shallow aquifer north of Ravenna (Italy) was analysed through the study of ion- exchange occurring in the area and its variance throughout the year, applying a depth-specific sampling method. In the study area were identified ion exchange, calcite and dolomite precipitation, and gypsum dissolution and sulphate reduction as the main processes controlling the groundwater composition. High concentrations of arsenic detected only at specific depth indicate its connexion with the organic matter. Acid mine drainage effects related to the tin extraction in the Bolivian Altiplano was studied, on water and sediment matrix. Water contamination results strictly dependent on the seasonal variation, on pH and redox conditions. During the dry season the strong evaporation and scarce water flow lead to low pH values, high concentrations of heavy metals in surface waters and precipitation of secondary minerals along the river, which could be released in oxidizing conditions as demonstrated through the sequential extraction analysis. The increase of the water flow during the wet season lead to an increase of pH values and a decrease in heavy metal concentrations, due to dilution effect and, as e.g. for the iron, to precipitation.

Impatto ambientale dei rifiuti e degli sprechi agroalimentari in Europa e in Italia

Nonostante il fatto che una gran parte del mondo viva ancora oggi a livelli di sussistenza, i dati in nostro possesso ci indicano che le attività umane stanno esaurendo le risorse ambientali del pianeta. La causa di questo eccessivo sfruttamento delle risorse è da ricercare nei pattern non sostenibili di produzione e consumo dei paesi sviluppati. La preoccupazione per le conseguenze sull'ambiente e la lotta al cambiamento climatico hanno posto le politiche ambientali al centro dell'attenzione internazionale. Il Protocollo di Kyoto e la Commissione Europea hanno stabilito degli obiettivi di riduzione delle emissioni di gas serra, rispettivamente del 12% entro il 2012 e del 20% entro il 2020. All'interno del Protocollo di Kyoto l'obiettivo per l'Italia è ridurre del 6,5% le emissioni di gas serra nazionali rispetto al 1990. Le politiche mirate alla riduzione delle emissioni di gas serra hanno in genere come obiettivo gli impianti energetici e i trasporti. Poca attenzione viene data alla filiera agroalimentare pur sapendo che l'agricoltura ha un forte impatto sull'ambiente e recenti studi stimano che circa il 50% del cibo prodotto viene perso o buttato via dalla produzione al consumo. Alla luce di questi dati, il mio lavoro di tesi ha avuto come obiettivo quello di quantificare i rifiuti e gli sprechi agroalimentari in Europa e in Italia e stimare l'impatto ambientale associato. I dati raccolti in questa tesi mettono in evidenza l'importanza di migliorare l'efficienza della filiera agroalimentare per ridurre l'impatto ambientale nazionale e rispettare gli accordi internazionali sulla lotta ai cambiamenti climatici.

Fracture Mechanics Investigation of Structures with Defects

Fracture mechanics plays an important role in the material science, structure design and industrial production due to the failure of materials and structures are paid high attention in human activities. This dissertation, concentrates on some of the fractural aspects of shaft and composite which have being increasingly used in modern structures, consists four chapters within two parts. Chapters 1 to 4 are included in part 1. In the first chapter, the basic knowledge about the stress and displacement fields in the vicinity of a crack tip is introduced. A review involves the general methods of calculating stress intensity factors are presented. In Chapter 2, two simple engineering methods for a fast and close approximation of stress intensity factors of cracked or notched beams under tension, bending moment, shear force, as well as torque are presented. New formulae for calculating the stress intensity factors are proposed. One of the methods named Section Method is improved and applied to the three dimensional analysis of cracked circular section for calculating stress intensity factors. The comparisons between the present results and the solutions calculated by ABAQUS for single mode and mixed mode are studied. In chapter 3, fracture criteria for a crack subjected to mixed mode loading of two-dimension and three-dimension are reviewed. The crack extension angle for single mode and mixed mode, and the critical loading domain obtained by SEDF and MTS are compared. The effects of the crack depth and the applied force ratio on the crack propagation angle and the critical loading are investigated. Three different methods calculating the crack initiation angle for three-dimension analysis of various crack depth and crack position are compared. It should be noted that the stress intensity factors used in the criteria are calculated in section 2.1.

Alla ricerca della sostenibilità: lo sviluppo dell'agricoltura dall'Unità d'Italia alla Green Economy

L’elaborato finale presentato per la tesi di Dottorato analizza e riconduce a unitarietà, per quanto possibile, alcune delle attività di ricerca da me svolte durante questi tre anni, il cui filo conduttore è l'impatto ambientale delle attività umane e la promozione dello sviluppo sostenibile. Il mio filone di ricerca è stato improntato, dal punto di vista di politica economica, sull'analisi storica dello sviluppo del settore agricolo dall'Unità d'Italia ai giorni nostri e dei cambiamenti avvenuti in contemporanea nel contesto socio-economico e territoriale nazionale, facendo particolare riferimento alle tematiche legate ai consumi e alla dipendenza energetica ed all'impatto ambientale. Parte della mia ricerca è stata, infatti, incentrata sull'analisi dello sviluppo della Green Economy, in particolare per quanto riguarda il settore agroalimentare e la produzione di fonti di energia rinnovabile. Enfasi viene posta sia sulle politiche implementate a livello comunitario e nazionale, sia sul cambiamento dei consumi, in particolare per quanto riguarda gli acquisti di prodotti biologici. La Green Economy è vista come fattore di sviluppo e opportunità per uscire dall'attuale contesto di crisi economico-finanziaria. Crisi, che è strutturale e di carattere duraturo, affiancata da una crescente problematica ambientale dovuta all'attuale modello produttivo, fortemente dipendente dai combustibili fossili. Difatti la necessità di cambiare paradigma produttivo promuovendo la sostenibilità è visto anche in ottica di mitigazione del cambiamento climatico e dei suoi impatti socio-economici particolare dal punto di vista dei disastri ambientali. Questo punto è analizzato anche in termini di sicurezza internazionale e di emergenza umanitaria, con riferimento al possibile utilizzo da parte delle organizzazioni di intervento nei contesti di emergenza di tecnologie alimentate da energia rinnovabile. Dando così una risposta Green ad una problematica esacerbata dall'impatto dello sviluppo delle attività umane.

Il risparmio delle risorse alla scala abitativa e di insediamento. Tecnologie non convenzionali e valutazione ambientale attraverso metodologia LCA.

Nel corso del mio lavoro di ricerca mi sono occupata di identificare strategie che permettano il risparmio delle risorse a livello edilizio e di approfondire un metodo per la valutazione ambientale di tali strategie. La convinzione di fondo è che bisogna uscire da una visione antropocentrica in cui tutto ciò che ci circonda è merce e materiale a disposizione dell’uomo, per entrare in una nuova era di equilibrio tra le risorse della terra e le attività che l’uomo esercita sul pianeta. Ho quindi affrontato il tema dell’edilizia responsabile approfondendo l’ambito delle costruzioni in balle di paglia e terra. Sono convinta che l’edilizia industriale abbia un futuro molto breve davanti a sé e lascerà inevitabilmente spazio a tecniche non convenzionali che coinvolgono materiali di semplice reperimento e posa in opera. Sono altresì convinta che il solo utilizzo di materiali naturali non sia garanzia di danni ridotti sull’ecosistema. Allo stesso tempo ritengo che una mera certificazione energetica non sia sinonimo di sostenibilità. Per questo motivo ho valutato le tecnologie non convenzionali con approccio LCA (Life Cycle Assessment), approfondendo gli impatti legati alla produzione, ai trasporti degli stessi, alla tipologia di messa in opera, e ai loro possibili scenari di fine vita. Inoltre ho approfondito il metodo di calcolo dei danni IMPACT, identificando una carenza nel sistema, che non prevede una categoria di danno legata alle modifiche delle condizioni idrogeologiche del terreno. La ricerca si è svolta attraverso attività pratiche e sperimentali in cantieri di edilizia non convenzionale e attività di ricerca e studio sull’LCA presso l’Enea di Bologna (Ing. Paolo Neri).

Stream sediments analysis for geochemical mapping of Romagna Apennines (Northern Italy): monitoring and management tool of environmental resources at various scales

Geochemical mapping is a valuable tool for the control of territory that can be used not only in the identification of mineral resources and geological, agricultural and forestry studies but also in the monitoring of natural resources by giving solutions to environmental and economic problems. Stream sediments are widely used in the sampling campaigns carried out by the world's governments and research groups for their characteristics of broad representativeness of rocks and soils, for ease of sampling and for the possibility to conduct very detailed sampling In this context, the environmental role of stream sediments provides a good basis for the implementation of environmental management measures, in fact the composition of river sediments is an important factor in understanding the complex dynamics that develop within catchment basins therefore they represent a critical environmental compartment: they can persistently incorporate pollutants after a process of contamination and release into the biosphere if the environmental conditions change. It is essential to determine whether the concentrations of certain elements, in particular heavy metals, can be the result of natural erosion of rocks containing high concentrations of specific elements or are generated as residues of human activities related to a certain study area. This PhD thesis aims to extract from an extensive database on stream sediments of the Romagna rivers the widest spectrum of informations. The study involved low and high order stream in the mountain and hilly area, but also the sediments of the floodplain area, where intensive agriculture is active. The geochemical signals recorded by the stream sediments will be interpreted in order to reconstruct the natural variability related to bedrock and soil contribution, the effects of the river dynamics, the anomalous sites, and with the calculation of background values be able to evaluate their level of degradation and predict the environmental risk.

Biomechanical modelling of human knee during living activities

The knee joint is a key structure of the human locomotor system. The knowledge of how each single anatomical structure of the knee contributes to determine the physiological function of the knee, is of fundamental importance for the development of new prostheses and novel clinical, surgical, and rehabilitative procedures. In this context, a modelling approach is necessary to estimate the biomechanic function of each anatomical structure during daily living activities. The main aim of this study was to obtain a subject-specific model of the knee joint of a selected healthy subject. In particular, 3D models of the cruciate ligaments and of the tibio-femoral articular contact were proposed and developed using accurate bony geometries and kinematics reliably recorded by means of nuclear magnetic resonance and 3D video-fluoroscopy from the selected subject. Regarding the model of the cruciate ligaments, each ligament was modelled with 25 linear-elastic elements paying particular attention to the anatomical twisting of the fibres. The devised model was as subject-specific as possible. The geometrical parameters were directly estimated from the experimental measurements, whereas the only mechanical parameter of the model, the elastic modulus, had to be considered from the literature because of the invasiveness of the needed measurements. Thus, the developed model was employed for simulations of stability tests and during living activities. Physiologically meaningful results were always obtained. Nevertheless, the lack of subject-specific mechanical characterization induced to design and partially develop a novel experimental method to characterize the mechanics of the human cruciate ligaments in living healthy subjects. Moreover, using the same subject-specific data, the tibio-femoral articular interaction was modelled investigating the location of the contact point during the execution of daily motor tasks and the contact area at the full extension with and without the whole body weight of the subject. Two different approaches were implemented and their efficiency was evaluated. Thus, pros and cons of each approach were discussed in order to suggest future improvements of this methodologies. The final results of this study will contribute to produce useful methodologies for the investigation of the in-vivo function and pathology of the knee joint during the execution of daily living activities. Thus, the developed methodologies will be useful tools for the development of new prostheses, tools and procedures both in research field and in diagnostic, surgical and rehabilitative fields.

Equine and human mutual welfare: a whole subject? Critical aspects and possible strategies in equine-assisted activities and therapies

General aim of the study is equine welfare, particularly concerning different husbandry methodic and inter-specific relational factors. Specific aim is the evaluation of possible mutual (to humans and to equines) benefits and the analysis of critical factors/strength points, of human-horse relationship within Therapeutic Riding context (TR). The peculiarities of human-horse relationship (compared to the bond with “Pet”) are analyzed, concerning their socio-anthropological, psychological, psycho-dynamic distinctive characteristics. 8 European representative therapeutic riding centers (TRC) were therefore selected (on the basis of their different animals’ husbandry criteria, and of the different rehabilitative methodologies adopted). TRC were investigated through 2 different questionnaires, specifically settled to access objective/subjective animal welfare parameters; the quality of human-horse relationship; technicians’ emotional experienced. 3 Centers were further selected, and behavioral (145 hours of behavioral recording) and physiological parameters (heart rate and heart rate variability) were evaluated, aimed to access equine welfare and horses’ adaptive responses/coping (towards general environment and towards TR job). Moreover a specific “handling-task” was ideated and experimented, aimed to measure the quality of TR technicians-horses relationship. We did therefore evaluate both the individual horses’ responses and the possible differences among Centers. Data collected highlight the lack of univocal standardized methodic, concerning the general animals’ management and the specific methodologies (aimed to improve animal welfare and to empower TR efficacy). Some positive and some critical aspects were detected concerning TR personnel-horse relationship. Another experimental approach did evaluate the efficacy (concerning the mutual benefits’ empowerment) of an “ethologically-fitted” TR intervention, aimed to educate children to and through the relationship with horses. Our data evidenced that the improvement of human horse relationship, through structured educational programs for TR personnel might have important consequences both to human and equine welfare.