Magnetohydrodynamic Effects On Mixed Convection Flows In Channels And Ducts

This work focuses on magnetohydrodynamic (MHD) mixed convection flow of electrically conducting fluids enclosed in simple 1D and 2D geometries in steady periodic regime. In particular, in Chapter one a short overview is given about the history of MHD, with reference to papers available in literature, and a listing of some of its most common technological applications, whereas Chapter two deals with the analytical formulation of the MHD problem, starting from the fluid dynamic and energy equations and adding the effects of an external imposed magnetic field using the Ohm's law and the definition of the Lorentz force. Moreover a description of the various kinds of boundary conditions is given, with particular emphasis given to their practical realization. Chapter three, four and five describe the solution procedure of mixed convective flows with MHD effects. In all cases a uniform parallel magnetic field is supposed to be present in the whole fluid domain transverse with respect to the velocity field. The steady-periodic regime will be analyzed, where the periodicity is induced by wall temperature boundary conditions, which vary in time with a sinusoidal law. Local balance equations of momentum, energy and charge will be solved analytically and numerically using as parameters either geometrical ratios or material properties. In particular, in Chapter three the solution method for the mixed convective flow in a 1D vertical parallel channel with MHD effects is illustrated. The influence of a transverse magnetic field will be studied in the steady periodic regime induced by an oscillating wall temperature. Analytical and numerical solutions will be provided in terms of velocity and temperature profiles, wall friction factors and average heat fluxes for several values of the governing parameters. In Chapter four the 2D problem of the mixed convective flow in a vertical round pipe with MHD effects is analyzed. Again, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the wall. A numerical solution is presented, obtained using a finite element approach, and as a result velocity and temperature profiles, wall friction factors and average heat fluxes are derived for several values of the Hartmann and Prandtl numbers. In Chapter five the 2D problem of the mixed convective flow in a vertical rectangular duct with MHD effects is discussed. As seen in the previous chapters, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the four walls. The numerical solution obtained using a finite element approach is presented, and a collection of results, including velocity and temperature profiles, wall friction factors and average heat fluxes, is provided for several values of, among other parameters, the duct aspect ratio. A comparison with analytical solutions is also provided, as a proof of the validity of the numerical method. Chapter six is the concluding chapter, where some reflections on the MHD effects on mixed convection flow will be made, in agreement with the experience and the results gathered in the analyses presented in the previous chapters. In the appendices special auxiliary functions and FORTRAN program listings are reported, to support the formulations used in the solution chapters.

MCAO for Extremely Large Telescopes: the cases of LBT and E-ELT

Several MCAO systems are under study to improve the angular resolution of the current and of the future generation large ground-based telescopes (diameters in the 8-40 m range). The subject of this PhD Thesis is embedded in this context. Two MCAO systems, in dierent realization phases, are addressed in this Thesis: NIRVANA, the 'double' MCAO system designed for one of the interferometric instruments of LBT, is in the integration and testing phase; MAORY, the future E-ELT MCAO module, is under preliminary study. These two systems takle the sky coverage problem in two dierent ways. The layer oriented approach of NIRVANA, coupled with multi-pyramids wavefront sensors, takes advantage of the optical co-addition of the signal coming from up to 12 NGS in a annular 2' to 6' technical FoV and up to 8 in the central 2' FoV. Summing the light coming from many natural sources permits to increase the limiting magnitude of the single NGS and to improve considerably the sky coverage. One of the two Wavefront Sensors for the mid- high altitude atmosphere analysis has been integrated and tested as a stand- alone unit in the laboratory at INAF-Osservatorio Astronomico di Bologna and afterwards delivered to the MPIA laboratories in Heidelberg, where was integrated and aligned to the post-focal optical relay of one LINC-NIRVANA arm. A number of tests were performed in order to characterize and optimize the system functionalities and performance. A report about this work is presented in Chapter 2. In the MAORY case, to ensure correction uniformity and sky coverage, the LGS-based approach is the current baseline. However, since the Sodium layer is approximately 10 km thick, the articial reference source looks elongated, especially when observed from the edge of a large aperture. On a 30-40 m class telescope, for instance, the maximum elongation varies between few arcsec and 10 arcsec, depending on the actual telescope diameter, on the Sodium layer properties and on the laser launcher position. The centroiding error in a Shack-Hartmann WFS increases proportionally to the elongation (in a photon noise dominated regime), strongly limiting the performance. To compensate for this effect a straightforward solution is to increase the laser power, i.e. to increase the number of detected photons per subaperture. The scope of Chapter 3 is twofold: an analysis of the performance of three dierent algorithms (Weighted Center of Gravity, Correlation and Quad-cell) for the instantaneous LGS image position measurement in presence of elongated spots and the determination of the required number of photons to achieve a certain average wavefront error over the telescope aperture. An alternative optical solution to the spot elongation problem is proposed in Section 3.4. Starting from the considerations presented in Chapter 3, a first order analysis of the LGS WFS for MAORY (number of subapertures, number of detected photons per subaperture, RON, focal plane sampling, subaperture FoV) is the subject of Chapter 4. An LGS WFS laboratory prototype was designed to reproduce the relevant aspects of an LGS SH WFS for the E-ELT and to evaluate the performance of different centroid algorithms in presence of elongated spots as investigated numerically and analytically in Chapter 3. This prototype permits to simulate realistic Sodium proles. A full testing plan for the prototype is set in Chapter 4.

La qualità del servizio sportivo come strumento di miglioramento del benessere psico-fisico dell'utente

La ricerca approfondisce le modalità  di applicazione degli standard di qualità  nell'ambito del servizio sportivo, qualità  certificata attraverso sistemi convenzionali o auto verificata attraverso strumenti quali carte di servizio. L'applicazione e verifica dei sistemi di qualità  ad un servizio, seppur non considerato pubblico ma comunque di interesse generale, deve essere messa in relazione con i risultati che il servizio stesso si prefigge sia dal punto di vista del privato (o pubblico) che gestisce ed esercita l'attività  sportiva, sia dal punto di vista del cittadino che lo utilizza. Pertanto la ricerca è stata dedicata all'incidenza della qualità  nei miglioramenti del benessere psico-fisico dell'utente e all'eventuale efficacia della stessa come strumento di marketing per la diffusione del servizio. Sono state prese in esame tre diverse realtà  sportive, tre piscine. Due delle quali, dopo una prima rilevazione esplorativa, si sono dotate di una Carta dei Servizi. La terza piscina è invece gestita da una società  certificata ISO 9001. Sono stati proposti ed elaborati oltre 800 questionari dai quali sono emerse interessanti indicazioni su quanto e come la qualità  del servizio sia stato percepito dall'utente sotto forma di miglioramento del proprio stato psico-fisico ma anche di come sia ritenuta indispensabile una attenzione del gestore verso l'utente affinchè egli possa considerare utile l'attività  motoria dal punto di vista del miglioramento del proprio benessere. Più in particolare, attraverso l'utilizzo dell'analisi fattoriale prima e di modelli Lisrel poi, si è ottenuta una riduzione della complessità  del numero di fattori che spiegano il fenomeno. Questi fattori sono stati messi in correlazione con il livello di soddisfazione complessiva degli utenti e, dalle due rilevazioni per le quali il modello Lisrel ha restituito dati attendibili, è emerso come il fattore "servizi per gli utenti", comprendente aspetti quali lo spazio in acqua e la comodità  degli spogliatoi, sia quello che ha una maggior correlazione con la soddisfazione complessiva. La Carta dei Servizi, pur ritenuta utile dagli utenti che la conoscono, risulta uno strumento poco conosciuto ed in generale privo di appeal anche dal punto di vista del marketing. Nella percezione dell'utente questo strumento non contribuisce al miglioramento del proprio stato psico-fisico. E' interessante rilevare, invece, che gli utenti che conoscono la Certificazione di qualità  hanno una miglior percezione del servizio. In generale i molteplici interessi commerciali legati alle certificazioni o "autocertificazioni" hanno generato, in questi ultimi anni, confusione nelle società  sportive e negli enti che gestiscono impianti sportivi tra il concetto di qualità  (come cultura e occasione di miglioramento) e quello di "certificazione di qualità". In tale contesto "l'apparire" è divenuto più importante dell'"essere" perchè, la maggiore attenzione all'uso di tecniche piuttosto che all'approfondimento dei principi manageriali grazie ai quali è possibile fare qualità , ha finito per banalizzarne il concetto. Ma se il cliente/utente (interno o esterno) è insoddisfatto nonostante il rispetto di standard e specifiche da parte dell'azienda si può ancora parlare di qualità ?

Laser guide stars wavefront sensors for the EELT

The Adaptive Optics is the measurement and correction in real time of the wavefront aberration of the star light caused by the atmospheric turbulence, that limits the angular resolution of ground based telescopes and thus their capabilities to deep explore faint and crowded astronomical objects. The lack of natural stars enough bright to be used as reference sources for the Adaptive Optics, over a relevant fraction of the sky, led to the introduction of artificial reference stars. The so-called Laser Guide Stars are produced by exciting the Sodium atoms in a layer laying at 90km of altitude, by a powerful laser beam projected toward the sky. The possibility to turn on a reference star close to the scientific targets of interest has the drawback in an increased difficulty in the wavefront measuring, mainly due to the time instability of the Sodium layer density. These issues are increased with the telescope diameter. In view of the construction of the 42m diameter European Extremely Large Telescope a detailed investigation of the achievable performances of Adaptive Optics becomes mandatory to exploit its unique angular resolution . The goal of this Thesis was to present a complete description of a laboratory Prototype development simulating a Shack-Hartmann wavefront sensor using Laser Guide Stars as references, in the expected conditions for a 42m telescope. From the conceptual design, through the opto-mechanical design, to the Assembly, Integration and Test, all the phases of the Prototype construction are explained. The tests carried out shown the reliability of the images produced by the Prototype that agreed with the numerical simulations. For this reason some possible upgrades regarding the opto-mechanical design are presented, to extend the system functionalities and let the Prototype become a more complete test bench to simulate the performances and drive the future Adaptive Optics modules design.

Oltre il limite invalicabile. Procedure, piani, progetti sostenibili per le aree militari dismissibili di Piacenza

The research project concerns the restoration of military real estate, starting from the procedures in progress in Italy related to dismission, with particular emphasis for Piacenza and the case study of Caserme Bixio and Nicolai (Comparto Nord/San Sisto-Cittadella). The work is aimed at defining the relationship between urban planning and rehabilitation of dismissed military areas, in order to create a synergic effort capable to face the transformation of these sites and their integration into the urban tissue. The results obtained from the various recordings performed in Italy and in USA during the preparation of this thesis may help to find a new possible scenario for the Comparto Nord and its historic buildings.