Innovative Homogeneous and Heterogeneous Systems for Electrochemically Generated Luminescence Investigations: Towards One-Dimensional ECL

My research PhD work is focused on the Electrochemically Generated Luminescence (ECL) investigation of several different homogeneous and heterogeneous systems. ECL is a redox induced emission, a process whereby species, generated at electrodes, undergo a high-energy electron transfer reaction to form excited states that emit light. Since its first application, the ECL technique has become a very powerful analytical tool and has widely been used in biosensor transduction. ECL presents an intrinsically low noise and high sensitivity; moreover, the electrochemical generation of the excited state prevents scattering of the light source: for all these characteristics, it is an elective technique for ultrasensitive immunoassay detection. The majority of ECL systems involve species in solution where the emission occurs in the diffusion layer near to the electrode surface. However, over the past few years, an intense research has been focused on the ECL generated from species constrained on the electrode surface. The aim of my work is to study the behavior of ECL-generating molecular systems upon the progressive increase of their spatial constraints, that is, passing from isolated species in solution, to fluorophores embedded within a polymeric film and, finally, to patterned surfaces bearing “one-dimensional” emitting spots. In order to describe these trends, I use different “dimensions” to indicate the different classes of compounds. My thesis was mostly developed in the electrochemistry group of Bologna with the supervision of Prof Francesco Paolucci and Dr Massimo Marcaccio. With their help and also thanks to their long experience in the molecular and supramolecular ECL fields and in the surface investigations using scanning probe microscopy techniques, I was able to obtain the results herein described. Moreover, during my research work, I have established a new collaboration with the group of Nanobiotechnology of Prof. Robert Forster (Dublin City University) where I spent a research period. Prof. Forster has a broad experience in the biomedical field, especially he focuses his research on film surfaces biosensor based on the ECL transduction. This thesis can be divided into three sections described as follows: (i) in the fist section, homogeneous molecular and supramolecular ECL-active systems, either organic or inorganic species (i.e., corannulene, dendrimers and iridium metal complex), are described. Driving force for this kind of studies includes the search for new luminophores that display on one hand higher ECL efficiencies and on the other simple mechanisms for modulating intensity and energy of their emission in view of their effective use in bioconjugation applications. (ii) in the second section, the investigation of some heterogeneous ECL systems is reported. Redox polymers comprising inorganic luminophores were described. In such a context, a new conducting platform, based on carbon nanotubes, was developed aimed to accomplish both the binding of a biological molecule and its electronic wiring to the electrode. This is an essential step for the ECL application in the field of biosensors. (iii) in the third section, different patterns were produced on the electrode surface using a Scanning Electrochemical Microscopy. I developed a new methods for locally functionalizing an inert surface and reacting this surface with a luminescent probe. In this way, I successfully obtained a locally ECL active platform for multi-array application.

La fotografia, il film e il video nella Land art tra documentazione e sperimentazione

La tesi affronta il ruolo problematico della documentazione nella Land art, sia per quanto riguarda l’immagine diffusa dai magazine e dalle riviste d’arte, sia affrontando nello specifico il rapporto con i media nella poetica degli artisti, dedicando particolare attenzione a De Maria, Heizer, Oppenheim, Smithson, Holt, Dibbets, Long, Fulton e Christo e Jeanne-Claude.

In-situ and real time scanning probe microscopy of organic ultra thin films

In recent decades, Organic Thin Film Transistors (OTFTs) have attracted lots of interest due to their low cost, large area and flexible properties which have brought them to be considered the building blocks of the future organic electronics. Experimentally, devices based on the same organic material deposited in different ways, i.e. by varying the deposition rate of the molecules, show different electrical performance. As predicted theoretically, this is due to the speed and rate by which charge carriers can be transported by hopping in organic thin films, transport that depends on the molecular arrangement of the molecules. This strongly suggests a correlation between the morphology of the organic semiconductor and the performance of the OTFT and hence motivated us to carry out an in-situ real time SPM study of organic semiconductor growth as an almost unprecedent experiment with the aim to fully describe the morphological evolution of the ultra-thin film and find the relevant morphological parameters affecting the OTFT electrical response. For the case of 6T on silicon oxide, we have shown that the growth mechanism is 2D+3D, with a roughening transition at the third layer and a rapid roughening. Relevant morphological parameters have been extracted by the AFM images. We also developed an original mathematical model to estimate theoretically and more accurately than before, the capacitance of an EFM tip in front of a metallic substrate. Finally, we obtained Ultra High Vacuum (UHV) AFM images of 6T at lying molecules layer both on silicon oxide and on top of 6T islands. Moreover, we performed ex-situ AFM imaging on a bilayer film composed of pentacene (a p-type semiconductor) and C60 (an n-type semiconductor).

On Designing Compliant Actuators Based On Dielectric Elastomers

Dielectric Elastomers (DE) are incompressible dielectrics which can experience deviatoric (isochoric) finite deformations in response to applied large electric fields. Thanks to the strong electro-mechanical coupling, DE intrinsically offer great potentialities for conceiving novel solid-state mechatronic devices, in particular linear actuators, which are more integrated, lightweight, economic, silent, resilient and disposable than equivalent devices based on traditional technologies. Such systems may have a huge impact in applications where the traditional technology does not allow coping with the limits of weight or encumbrance, and with problems involving interaction with humans or unknown environments. Fields such as medicine, domotic, entertainment, aerospace and transportation may profit. For actuation usage, DE are typically shaped in thin films coated with compliant electrodes on both sides and piled one on the other to form a multilayered DE. DE-based Linear Actuators (DELA) are entirely constituted by polymeric materials and their overall performance is highly influenced by several interacting factors; firstly by the electromechanical properties of the film, secondly by the mechanical properties and geometry of the polymeric frame designed to support the film, and finally by the driving circuits and activation strategies. In the last decade, much effort has been focused in the devolvement of analytical and numerical models that could explain and predict the hyperelastic behavior of different types of DE materials. Nevertheless, at present, the use of DELA is limited. The main reasons are 1) the lack of quantitative and qualitative models of the actuator as a whole system 2) the lack of a simple and reliable design methodology. In this thesis, a new point of view in the study of DELA is presented which takes into account the interaction between the DE film and the film supporting frame. Hyperelastic models of the DE film are reported which are capable of modeling the DE and the compliant electrodes. The supporting frames are analyzed and designed as compliant mechanisms using pseudo-rigid body models and subsequent finite element analysis. A new design methodology is reported which optimize the actuator performances allowing to specifically choose its inherent stiffness. As a particular case, the methodology focuses on the design of constant force actuators. This class of actuators are an example of how the force control could be highly simplified. Three new DE actuator concepts are proposed which highlight the goodness of the proposed method.

Advanced Numerical Simulation of Silicon-Based Solar Cells

Photovoltaic (PV) conversion is the direct production of electrical energy from sun without involving the emission of polluting substances. In order to be competitive with other energy sources, cost of the PV technology must be reduced ensuring adequate conversion efficiencies. These goals have motivated the interest of researchers in investigating advanced designs of crystalline silicon solar (c-Si) cells. Since lowering the cost of PV devices involves the reduction of the volume of semiconductor, an effective light trapping strategy aimed at increasing the photon absorption is required. Modeling of solar cells by electro-optical numerical simulation is helpful to predict the performance of future generations devices exhibiting advanced light-trapping schemes and to provide new and more specific guidelines to industry. The approaches to optical simulation commonly adopted for c-Si solar cells may lead to inaccurate results in case of thin film and nano-stuctured solar cells. On the other hand, rigorous solvers of Maxwell equations are really cpu- and memory-intensive. Recently, in optical simulation of solar cells, the RCWA method has gained relevance, providing a good trade-off between accuracy and computational resources requirement. This thesis is a contribution to the numerical simulation of advanced silicon solar cells by means of a state-of-the-art numerical 2-D/3-D device simulator, that has been successfully applied to the simulation of selective emitter and the rear point contact solar cells, for which the multi-dimensionality of the transport model is required in order to properly account for all physical competing mechanisms. In the second part of the thesis, the optical problems is discussed. Two novel and computationally efficient RCWA implementations for 2-D simulation domains as well as a third RCWA for 3-D structures based on an eigenvalues calculation approach have been presented. The proposed simulators have been validated in terms of accuracy, numerical convergence, computation time and correctness of results.

Il critico teatrale come operatore di scrittura scenica. La critica teatrale italiana tra pratica organizzativa e utilizzo dei nuovi media nel Nuovo Teatro e in alcune esperienze dal 2003 ad oggi

La crisi del “teatro come servizio pubblico” degli Stabili, Piccolo Teatro in testa, si manifesta allo stadio di insoddisfazione interna già alla fine degli anni Cinquanta. Se dal punto di vista della pratica scenica, la prima faglia di rottura è pressoché unanimemente ricondotta alla comparsa delle primissime messe in scena –discusse, irritanti e provocatorie- di Carmelo Bene e Quartucci (1959-60) più difficile è individuare il corrispettivo di un critico-intellettuale apportatore di una altrettanto deflagrante rottura. I nomi di Arbasino e di Flaiano sono, in questo caso, i primi che vengono alla mente, ma, seppure portatori di una critica sensibile al “teatro ufficiale”, così come viene ribattezzato dopo il Convegno di Ivrea (1967) il modello attuato dagli Stabili, essi non possono, a ben vedere, essere considerati i veri promotori di una modalità differente di fare critica che, a partire da quel Convegno, si accompagnerà stabilmente alla ricerca scenica del Nuovo Teatro. Ma in cosa consiste, allora, questa nuova “operatività” critica? Si tratta principalmente di una modalità capace di operare alle soglie della scrittura, abbracciando una progressiva, ma costante fuoriuscita dalla redazione di cronache teatrali, per ripensare radicalmente la propria attività in nuovi spazi operativi quali le riviste e l’editoria di settore, un rapporto sempre più stretto con i mass-media quali radio e televisione e la pratica organizzativa di momenti spettacolari e teorici al contempo -festival, convegni, rassegne e premi- per una forma di partecipazione poi identificata come “sporcarsi le mani”. La seconda parte della tesi è una raccolta documentaria sull’oggi. A partire dal Manifesto dei Critici Impuri redatto nel 2003 a Prato da un gruppo di critici dell'ultima generazione, la tesi utilizza quella dichiarazione come punto di partenza per creare un piccolo archivio sull’oggi raccogliendo le elaborazioni di alcune delle esperienze più significative di questi dieci anni. Ricca appendice di materiali.

Valutazione dello spostamento tridimensionale degli impianti in giovani pazienti affetti da EDs riabilitati con overdenture implanto-supportati

Ectodermal Dysplasias syndrome (EDs) are a heterogeneous group of inherited disorders characterized by dysplasia of tissues of ectodermal origin. Complete or partial anodontia are the most frequent dental findings. Prosthetic rehabilitation is recommended from functional, esthetic, and psychological points of view. Because of the anatomical abnormalities of existing teeth and alveolar ridges, conventional prosthetic rehabilitation in young patient is often difficult. Five growing patients (age 9 to 11 years) with oligo- or anodontia were prosthetically rehabilitated. Panoramic film and Cone Bean Computerized Tomography were performed and a resin model of mandibular bone was made. Despite a remarkable multi-dimensional atrophy of the alveolar bone, the insertion of two tapered implants was possible. After a submerged healing period of 2 month, the implants were exposed and abutment connection was performed. Implants were connected with an expansion bar that permits mandibular growth and prosthetic retention. A removable prosthesis was constructed with ball attachments. Mandibular growth was followed and evaluated using the expansion guide and cephalometric radiographs. Mandibular growth in sagittal and transverse direction had no adverse effects on implant position. The expansion bar permitted the undisturbed growth of the mandible. After 4.5 years of follow-up, this study showed that Implant-supported overdenture may improve oral function, phonesis and esthetics. The mandibular rotation accompanying growth had not caused a significant problem relative to the angulation and migration of the implants. Implants can be successfully placed, restored and loaded in growing EDs patients. The cephalometric analysis supported that EDs patients show midface hypoplasia with a class III tendency, which can be avoided by early rehabilitation. Thanks to the good stability and retention of the implant-supported overdenture, patients considered the prostheses as comparable to natural teeth.

Framing Death. La morte in diretta, tra cinema e media digitali

Come dimostrano i sempre più numerosi casi di cronaca riportati dai notiziari, la preoccupazione per la gestione delle immagini di morte si configura come un nodo centrale che coinvolge spettatori, produttori di contenuti e broadcaster, dato che la sua emersione nel panorama mediale in cui siamo immersi è sempre più evidente. Se la letteratura socio-antropologica è generalmente concorde nel ritenere che, rispetto al passato, oggi la morte si manifesti con meno evidenza nella vita comune delle persone, che tendono a rimuovere i segni della contiguità vivendo il lutto in forma privata, essa è però percepita in modo pervasivo perché disseminata nei (e dai) media. L'elaborato, concentrandosi in maniera specifica sulle produzioni audiovisive, e quindi sulla possibilità intrinseca al cinema – e alle sue forme derivate – di registrare un evento in diretta, tenta di mappare alcune dinamiche di produzione e fruizione considerando una particolare manifestazione della morte: quella che viene comunemente indicata come “morte in diretta”. Dopo una prima ricognizione dedicata alla tensione continua tra la spinta a considerare la morte come l'ultimo tabù e le manifestazioni che essa assume all'interno della “necrocultura”, appare chiaro che il paradigma pornografico risulta ormai inefficace a delineare compiutamente le emersioni della morte nei media, soggetta a opacità e interdizioni variabili, e necessita dunque di prospettive analitiche più articolate. Il fulcro dell'analisi è dunque la produzione e il consumo di precisi filoni quali snuff, cannibal e mondo movie e quelle declinazioni del gore che hanno ibridato reale e fittizio: il tentativo è tracciare un percorso che, a partire dal cinema muto, giunga al panorama contemporaneo e alle pratiche di remix rese possibili dai media digitali, toccando episodi controversi come i Video Nasties, le dinamiche di moral panic scatenate dagli snuff film e quelle di contagio derivanti dalla manipolazione e diffusione delle immagini di morte.