Agrofood chain analysis: production, commercialisation and consumption of healthy food for population at risk of poverty in Italy

Italy registers a fast increase of low income population. Academics and policy makers consider income inequalities as a key determinant for low or inadequate healthy food consumption. Thus the objective is to understand how to overcome the agrofood chain barriers towards healthy food production, commercialisation and consumption for population at risk of poverty (ROP) in Italy. The study adopts a market oriented food chain approach, focusing the research ambit on ROP consumers, processing industries and retailers. The empirical investigation adopts a qualitative methodology with an explorative approach. The actors are investigated through 4 focus groups for consumers and carrying out 27 face to face semi-structured interviews for industries and retailers’ representatives. The results achieved provide the perceptions of each actor integrated into an overall chain approach. The analysis shows that all agrofood actors lack of an adequate level of knowledge towards healthy food definition. Food industries and retailers also show poor awareness about ROP consumers’ segment. In addition they perceive that the high costs for producing healthy food conflict with the low economic performances expected from ROP consumers’ segment. These aspects induce a scarce interest in investing on commercialisation strategies for healthy food for ROP consumers. Further ROP consumers show other notable barriers to adopt healthy diets caused, among others, by a personal strong negative attitude and lack of motivation. The personal barriers are also negatively influenced by several external socio-economic factors. The solutions to overcome the barriers shall rely on the improvement of the agrofood chain internal relations to identify successful strategies for increasing interest on low cost healthy food. In particular the focus should be on improved collaboration on innovation adoption and marketing strategies, considering ROP consumers’ preferences and needs. An external political intervention is instead necessary to fill the knowledge and regulations’ gaps on healthy food issues.

Processi di biorefining per l'estrazione di secondary chemical building blocks da sottoprotti dell'agro-industria

Phenol and cresols represent a good example of primary chemical building blocks of which 2.8 million tons are currently produced in Europe each year. Currently, these primary phenolic building blocks are produced by refining processes from fossil hydrocarbons: 5% of the world-wide production comes from coal (which contains 0.2% of phenols) through the distillation of the tar residue after the production of coke, while 95% of current world production of phenol is produced by the distillation and cracking of crude oil. In nature phenolic compounds are present in terrestrial higher plants and ferns in several different chemical structures while they are essentially absent in lower organisms and in animals. Biomass (which contain 3-8% of phenols) represents a substantial source of secondary chemical building blocks presently underexploited. These phenolic derivatives are currently used in tens thousand of tons to produce high cost products such as food additives and flavours (i.e. vanillin), fine chemicals (i.e. non-steroidal anti-inflammatory drugs such as ibuprofen or flurbiprofen) and polymers (i.e. poly p-vinylphenol, a photosensitive polymer for electronic and optoelectronic applications). European agrifood waste represents a low cost abundant raw material (250 millions tons per year) which does not subtract land use and processing resources from necessary sustainable food production. The class of phenolic compounds is essentially constituted by simple phenols, phenolic acids, hydroxycinnamic acid derivatives, flavonoids and lignans. As in the case of coke production, the removal of the phenolic contents from biomass upgrades also the residual biomass. Focusing on the phenolic component of agrifood wastes, huge processing and marketing opportunities open since phenols are used as chemical intermediates for a large number of applications, ranging from pharmaceuticals, agricultural chemicals, food ingredients etc. Following this approach we developed a biorefining process to recover the phenolic fraction of wheat bran based on enzymatic commercial biocatalysts in completely water based process, and polymeric resins with the aim of substituting secondary chemical building blocks with the same compounds naturally present in biomass. We characterized several industrial enzymatic product for their ability to hydrolize the different molecular features that are present in wheat bran cell walls structures, focusing on the hydrolysis of polysaccharidic chains and phenolics cross links. This industrial biocatalysts were tested on wheat bran and the optimized process allowed to liquefy up to the 60 % of the treated matter. The enzymatic treatment was also able to solubilise up to the 30 % of the alkali extractable ferulic acid. An extraction process of the phenolic fraction of the hydrolyzed wheat bran based on an adsorbtion/desorption process on styrene-polyvinyl benzene weak cation-exchange resin Amberlite IRA 95 was developed. The efficiency of the resin was tested on different model system containing ferulic acid and the adsorption and desorption working parameters optimized for the crude enzymatic hydrolyzed wheat bran. The extraction process developed had an overall yield of the 82% and allowed to obtain concentrated extracts containing up to 3000 ppm of ferulic acid. The crude enzymatic hydrolyzed wheat bran and the concentrated extract were finally used as substrate in a bioconversion process of ferulic acid into vanillin through resting cells fermentation. The bioconversion process had a yields in vanillin of 60-70% within 5-6 hours of fermentation. Our findings are the first step on the way to demonstrating the economical feasibility for the recovery of biophenols from agrifood wastes through a whole crop approach in a sustainable biorefining process.

Ricerca, mediante tecniche di proteomica, di biomarcatori proteici utili nella valutazione della qualità degli alimenti di origine animale

In the last decades, the increase of industrial activities and of the request for the world food requirement, the intensification of natural resources exploitation, directly connected to pollution, have aroused an increasing interest of the public opinion towards initiatives linked to the regulation of food production, as well to the institution of a modern legislation for the consumer guardianship. This work was planned taking into account some important thematics related to marine environment, collecting and showing the data obtained from the studies made on different marine species of commercial interest (Chamelea gallina, Mytilus edulis, Ostrea edulis, Crassostrea gigas, Salmo salar, Gadus morhua). These studies have evaluated the effects of important physic and chemical parameters variations (temperature, xenobiotics like drugs, hydrocarbons and pesticides) on cells involved in the immune defence (haemocytes) and on some important enzymatic systems involved in xenobiotic biotransformation processes (cytochrome P450 complex) and in the related antioxidant defence processes (Superoxide dismutase, Catalase, Heat Shock Protein), from a biochemical and bimolecular point of view. Oxygen is essential in the biological answer of a living organism. Its consume in the normal cellular breathing physiological processes and foreign substances biotransformation, leads to reactive oxygen species (ROS) formation, potentially toxic and responsible of biological macromolecules damages with consequent pathologies worsening. Such processes can bring to a qualitative alteration of the derived products, but also to a general state of suffering that in the most serious cases can provoke the death of the organism, with important repercussions in economic field, in the output of the breedings, of fishing and of aquaculture. In this study it seemed interesting to apply also alternative methodologies currently in use in the medical field (cytofluorimetry) and in proteomic studies (bidimensional electrophoresis, mass spectrometry) with the aim of identify new biomarkers to place beside the traditional methods for the control of the animal origin food quality. From the results it’s possible to point out some relevant aspects from each experiment: 1. The cytofluorimetric techniques applied to O. edulis and C. gigas could bring to important developments in the search of alternative methods that quickly allows to identify with precision the origin of a specific sample, contributing to oppose possible alimentary frauds, in this case for example related to presence of a different species, also under a qualitative profile, but morpholgically similar. A concrete perspective for the application in the inspective field of this method has to be confirmed by further laboratory tests that take also in account in vivo experiments to evaluate the effect in the whole organism of the factors evaluated only on haemocytes in vitro. These elements suggest therefore the possibility to suit the cytofluorimetric methods for the study of animal organisms of food interest, still before these enter the phase of industrial working processes, giving useful information about the possible presence of contaminants sources that can induce an increase of the immune defence and an alteration of normal cellular parameter values. 2. C. gallina immune system has shown an interesting answer to benzo[a]pyrene (B[a]P) exposure, dose and time dependent, with a significant decrease of the expression and of the activity of one of the most important enzymes involved in the antioxidant defence in haemocytes and haemolymph. The data obtained are confirmed by several measurements of physiological parameters, that together with the decrease of the activity of 7-etossi-resourifine-O-deetilase (EROD linked to xenobiotic biotransformation processes) during exposure, underline the major effects of B[a]P action. The identification of basal levels of EROD supports the possible presence of CYP1A subfamily in the invertebrates, still today controversial, never identified previously in C. gallina and never isolated in the immune cells, as confirmed instead in this study with the identification of CYP1A-immunopositive protein (CYP1A-IPP). This protein could reveal a good biomarker at the base of a simple and quick method that could give clear information about specific pollutants presence, even at low concentrations in the environment where usually these organisms are fished before being commercialized. 3. In this experiment it has been evaluated the effect of the antibiotic chloramphenicol (CA) in an important species of commercial interest, Chamelea gallina. Chloramphenicol is a drug still used in some developing countries, also in veterinary field. Controls to evaluate its presence in the alimentary products of animal origin, can reveal ineffective whereas the concentration results to be below the limit of sensitivity of the instruments usually used in this type of analysis. Negative effects of CA towards the CYP1A- IPP proteins, underlined in this work, seem to be due to the attack of free radicals resultant from the action of the antibiotic. This brings to a meaningful alteration of the biotransformation mechanisms through the free radicals. It seems particularly interesting to pay attention to the narrow relationships in C. gallina, between SOD/CAT and CYP450 system, actively involved in detoxification mechanism, especially if compared with the few similar works today present about mollusc, a group that is composed by numerous species that enter in the food field and on which constant controls are necessary to evaluate in a rapid and effective way the presence of possible contaminations. 4. The investigations on fishes (Gadus morhua, and Salmo salar) and on a bivalve mollusc (Mytilus edulis) have allowed to evaluate different aspects related to the possibility to identify a biomarker for the evaluation of the health of organisms of food interest and consequently for the quality of the final product through 2DE methodologies. In the seafood field these techniques are currently used with a discreet success only for vertebrates (fishes), while in the study of the invertebrates (molluscs) there are a lot of difficulties. The results obtained in this work have underline several problems in the correct identification of the isolated proteins in animal organisms of which doesn’t currently exist a complete genomic sequence. This brings to attribute some identities on the base of the comparison with similar proteins in other animal groups, incurring in the possibility to obtain inaccurate data and above all discordant with those obtained on the same animals by other authors. Nevertheless the data obtained in this work after MALDI-ToF analysis, result however objective and the spectra collected could be again analyzed in the future after the update of genomic database related to the species studied. 4-A. The investigation about the presence of HSP70 isoforms directly induced by different phenomena of stress like B[a]P presence, has used bidimensional electrophoresis methods in C. gallina, that have allowed to isolate numerous protein on 2DE gels, allowing the collection of several spots currently in phase of analysis with MALDI-ToF-MS. The present preliminary work has allowed therefore to acquire and to improve important methodologies in the study of cellular parameters and in the proteomic field, that is not only revealed of great potentiality in the application in medical and veterinary field, but also in the field of the inspection of the foods with connections to the toxicology and the environmental pollution. Such study contributes therefore to the search of rapid and new methodologies, that can increase the inspective strategies, integrating themselves with those existing, but improving at the same time the general background of information related to the state of health of the considered animal organism, with the possibility, still hypothetical, to replace in particular cases the employment of the traditional techniques in the alimentary field.

Filiera corta: percorsi di innovazione tecnici, organizzativi e sociali nella gestione strategica delle nicchie. Esperienze in Toscana e in Provenza

There is a widening consensus around the fact that, in many developed countries, food production-consumption patterns are in recent years interested by a process of deep change towards diversification and re-localisation practices, as a counter-tendency to the trend to the increasing disconnection between farming and food, producers and consumers. The relevance of these initiatives doesn't certainly lie on their economic dimension, but rather in their intense diffusion and growth rate, their spontaneous and autonomous nature and, especially, their intrinsic innovative potential. These dynamics involve a wide range of actors around local food patterns, embedding short food supply chains initiatives within a more complex and wider process of rural development, based on principles of sustainability, multifunctionality and valorisation of endogenous resources. In this work we have been analysing these features through a multi-level perspective, with reference to the dynamics between niche and regime and the inherent characteristics of the innovation paths. We apply this approach, through a qualitative methodology, to the analysis of the experience of farmers’ markets and Solidarity-Based Consumers Groups (Gruppi di Acquisto Solidale) ongoing in Tuscany, seeking to highlight the dynamics that are affecting the establishment of this alternative food production-consumption model (and its related innovative potential) from within and from without. To verify if and in which conditions they can constitute a niche, a protected space where radical innovations can develop, we make reference to the three interrelated analytic dimensions of socio-technical systems: the actors (i.e. individuals. social groups, organisations), the rules and institutions system, and the artefacts (i.e. the material and immaterial contexts in which the actors move). Through it, we analyse the innovative potential of niches and the level of their structuration and , then, the mechanisms of system transition, focusing on the new dynamics within the niche and between the niche and the policy regime emerging after the growth of interest by mass-media and public institutions and their direct involvement in the initiatives. Following the development of these significant experiences, we explore more deeply social, economic, cultural, political and organisational factors affecting innovations in face-to-face interactions, underpinning the critical aspects (sharing of alternative values, coherence at individual choices level, frictions on organisational aspects, inclusion/exclusion, attitudes towards integration at territorial level), towards uncovering until to the emergence of tensions and the risks of opportunistic behaviours that might arise from their growth. Finally, a comparison with similar experiences abroad is drawn (specifically with Provence), in order to detect food for thought, potentially useful for leading regional initiativestowards transition path.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Applicazioni industriali e di ricerca della spettroscopia NIR per la valutazione di indici qualitativi di prodotti alimentari

In the present work qualitative aspects of products that fall outside the classic Italian of food production view will be investigated, except for the apricot, a fruit, however, less studied by the methods considered here. The development of computer systems and the advanced software systems dedicated for statistical processing of data, has permitted the application of advanced technologies including the analysis of niche products. The near-infrared spectroscopic analysis was applied to the chemical industry for over twenty years and, subsequently, was applied in food industry with great success for non-destructive in line and off-line analysis. The work that will be presented below range from the use of spectroscopy for the determination of some rheological indices of ice cream applications to the characterization of the main quality indices of apricots, fresh dates, determination of the production areas of pistachio. Next to the spectroscopy will be illustrated different methods of multivariate analysis for spectra interpretation or for the construction of qualitative models of estimation. The thesis is divided into four separate studies that consider the same number of products. Each one of it is introduced by its own premise and ended with its own bibliography. This studies are preceded by a general discussion on the state of art and the basics of NIR spectroscopy.

Evaluation of Silver European EEL (anguilla anguilla) for the implementation of an Effective EEL Management plan in Mediterranean Coastal Lagoons

This thesis presents SEELF (Sustainable EEL fishery) Index, a methodology for evaluation of European eel (Anguilla anguilla) for the implementation of an effective Eel Management Plan, as defined by EU Regulation No.1100/2007. SEELF uses internal and external indices, age and blood parameters, and selects suitable specimen for restocking; it is also a reliable tool for eel stock management. In fact, SEELF Index, was developed in two versions: SEELF A, to be used in field operations (catch&release, eel status monitoring) and SEELF B to be used for quality control (food production) and research (eel status monitoring). Health status was evaluated also by biomarker analysis (ChE), and data were compared with age of eel. Age determination was performed with otolith reading and fish scale reading and a calibration between the two methods was possible. The study area was the Comacchio lagoon, a brackish coastal lagoon in Italy, well known as an example of suitable environment for eel fishery, where the capability to use the local natural resources has long been a key factor for a successful fishery management. Comacchio lagoon is proposed as an area where an effective EMP can be performed, in agreement with the main features (management of basins, reduction of mortality due to predators,etc.) highlighted for designation of European Restocking Area (ERA). The ERA is a new concept, proposed as a pillar of a new strategy on eel management and conservation. Furthermore, the features of ERAs can be useful in the framework of European Scale Eel Management Plan (ESEMP), proposed as a European scale implementation of EMP, providing a more effectiveness of conservation measures for eel management.

Ricerca di Escherichia coli produttori di verocitotossine e definizione di obiettivi di performance nella produzione primaria di alimenti di origine animale

La presenza di Escherichia coli produttori di verocitotossine (VTEC o STEC) rappresenta una tra le più importanti cause di malattia alimentare attualmente presenti in Europa. La sua presenza negli allevamenti di animali destinati alla produzione di alimenti rappresenta un importante rischio per la salute del consumatore. In conseguenza di comuni contaminazioni che si realizzano nel corso della macellazione, della mungitura i VTEC possono essere presenti nelle carni e nel latte e rappresentano un grave rischio se la preparazione per il consumo o i processi di lavorazione non comportano trattamenti in grado d’inattivarli (es. carni crude o poco cotte, latte non pastorizzato, formaggi freschi a latte crudo). La contaminazione dei campi coltivati conseguente alla dispersione di letame o attraverso acque contaminate può veicolare questi stipiti che sono normalmente albergati nell’intestino di ruminanti (domestici e selvatici) e anche prodotti vegetali consumati crudi, succhi e perfino sementi sono stati implicati in gravi episodi di malattia con gravi manifestazioni enteriche e complicazioni in grado di causare quadri patologici gravi e anche la morte. Stipiti di VTEC patogeni ingeriti con gli alimenti possono causare sintomi gastroenterici, con diarrea acquosa o emorragica (nel 50% dei casi), crampi addominali, febbre lieve e in una percentuale più bassa nausea e vomito. In alcuni casi (circa 5-10%) l’infezione gastroenterica si complica con manifestazioni tossiemiche caratterizzate da Sindrome Emolitico Uremica (SEU o HUS) con anemia emolitica, insufficienza renale grave e coinvolgimento neurologico o con una porpora trombotica trombocitopenica. Il tasso di mortalità dei pazienti che presentano l’infezione da E. coli è inferiore all’1%. I dati forniti dall’ECDC sulle infezioni alimentari nel periodo 2006-2010 hanno evidenziato un trend in leggero aumento del numero di infezioni a partire dal 2007. L’obiettivo degli studi condotti è quello di valutare la prevalenza ed il comportamento dei VTEC per una analisi del rischio più approfondita.

Hybrid portable systems for bio-nanosensors

The promising development in the routine nanofabrication and the increasing knowledge of the working principles of new classes of highly sensitive, label-free and possibly cost-effective bio-nanosensors for the detection of molecules in liquid environment, has rapidly increased the possibility to develop portable sensor devices that could have a great impact on many application fields, such as health-care, environment and food production, thanks to the intrinsic ability of these biosensors to detect, monitor and study events at the nanoscale. Moreover, there is a growing demand for low-cost, compact readout structures able to perform accurate preliminary tests on biosensors and/or to perform routine tests with respect to experimental conditions avoiding skilled personnel and bulky laboratory instruments. This thesis focuses on analysing, designing and testing novel implementation of bio-nanosensors in layered hybrid systems where microfluidic devices and microelectronic systems are fused in compact printed circuit board (PCB) technology. In particular the manuscript presents hybrid systems in two validating cases using nanopore and nanowire technology, demonstrating new features not covered by state of the art technologies and based on the use of two custom integrated circuits (ICs). As far as the nanopores interface system is concerned, an automatic setup has been developed for the concurrent formation of bilayer lipid membranes combined with a custom parallel readout electronic system creating a complete portable platform for nanopores or ion channels studies. On the other hand, referring to the nanowire readout hybrid interface, two systems enabling to perform parallel, real-time, complex impedance measurements based on lock-in technique, as well as impedance spectroscopy measurements have been developed. This feature enable to experimentally investigate the possibility to enrich informations on the bio-nanosensors concurrently acquiring impedance magnitude and phase thus investigating capacitive contributions of bioanalytical interactions on biosensor surface.

Aspetti di sostenibilità in agricoltura a diverse scale spaziali e temporali. Valutazioni ambientali, economiche ed energetiche.

La Tesi analizza le relazioni tra i processi di sviluppo agricolo e l’uso delle risorse naturali, in particolare di quelle energetiche, a livello internazionale (paesi in via di sviluppo e sviluppati), nazionale (Italia), regionale (Emilia Romagna) e aziendale, con lo scopo di valutare l’eco-efficienza dei processi di sviluppo agricolo, la sua evoluzione nel tempo e le principali dinamiche in relazione anche ai problemi di dipendenza dalle risorse fossili, della sicurezza alimentare, della sostituzione tra superfici agricole dedicate all’alimentazione umana ed animale. Per i due casi studio a livello macroeconomico è stata adottata la metodologia denominata “SUMMA” SUstainability Multi-method, multi-scale Assessment (Ulgiati et al., 2006), che integra una serie di categorie d’impatto dell’analisi del ciclo di vita, LCA, valutazioni costi-benefici e la prospettiva di analisi globale della contabilità emergetica. L’analisi su larga scala è stata ulteriormente arricchita da un caso studio sulla scala locale, di una fattoria produttrice di latte e di energia elettrica rinnovabile (fotovoltaico e biogas). Lo studio condotto mediante LCA e valutazione contingente ha valutato gli effetti ambientali, economici e sociali di scenari di riduzione della dipendenza dalle fonti fossili. I casi studio a livello macroeconomico dimostrano che, nonostante le politiche di supporto all’aumento di efficienza e a forme di produzione “verdi”, l’agricoltura a livello globale continua ad evolvere con un aumento della sua dipendenza dalle fonti energetiche fossili. I primi effetti delle politiche agricole comunitarie verso una maggiore sostenibilità sembrano tuttavia intravedersi per i Paesi Europei. Nel complesso la energy footprint si mantiene alta poiché la meccanizzazione continua dei processi agricoli deve necessariamente attingere da fonti energetiche sostitutive al lavoro umano. Le terre agricole diminuiscono nei paesi europei analizzati e in Italia aumentando i rischi d’insicurezza alimentare giacché la popolazione nazionale sta invece aumentando.

New water use efficiency strategies to cope with climate change

Crop water requirements are important elements for food production, especially in arid and semiarid regions. These regions are experience increasing population growth and less water for agriculture, which amplifies the need for more efficient irrigation. Improved water use efficiency is needed to produce more food while conserving water as a limited natural resource. Evaporation (E) from bare soil and Transpiration (T) from plants is considered a critical part of the global water cycle and, in recent decades, climate change could lead to increased E and T. Because energy is required to break hydrogen bonds and vaporize water, water and energy balances are closely connected. The soil water balance is also linked with water vapour losses to evapotranspiration (ET) that are dependent mainly on energy balance at the Earth’s surface. This work addresses the role of evapotranspiration for water use efficiency by developing a mathematical model that improves the accuracy of crop evapotranspiration calculation; accounting for the effects of weather conditions, e.g., wind speed and humidity, on crop coefficients, which relates crop evapotranspiration to reference evapotranspiration. The ability to partition ET into Evaporation and Transpiration components will help irrigation managers to find ways to improve water use efficiency by decreasing the ratio of evaporation to transpiration. The developed crop coefficient model will improve both irrigation scheduling and water resources planning in response to future climate change, which can improve world food production and water use efficiency in agriculture.

Advances in methods to detect, isolate and quantify foodborne pathogens

Foodborne diseases impact human health and economies worldwide in terms of health care and productivity loss. Prevention is necessary and methods to detect, isolate and quantify foodborne pathogens play a fundamental role, changing continuously to face microorganisms and food production evolution. Official methods are mainly based on microorganisms growth in different media and their isolation on selective agars followed by confirmation of presumptive colonies through biochemical and serological test. A complete identification requires form 7 to 10 days. Over the last decades, new molecular techniques based on antibodies and nucleic acids allow a more accurate typing and a faster detection and quantification. The present thesis aims to apply molecular techniques to improve official methods performances regarding two pathogens: Shiga-like Toxin-producing Escherichia coli (STEC) and Listeria monocytogenes. In 2011, a new strain of STEC belonging to the serogroup O104 provoked a large outbreak. Therefore, the development of a method to detect and isolate STEC O104 is demanded. The first objective of this work is the detection, isolation and identification of STEC O104 in sprouts artificially contaminated. Multiplex PCR assays and antibodies anti-O104 incorporated in reagents for immunomagnetic separation and latex agglutination were employed. Contamination levels of less than 1 CFU/g were detected. Multiplex PCR assays permitted a rapid screening of enriched food samples and identification of isolated colonies. Immunomagnetic separation and latex agglutination allowed a high sensitivity and rapid identification of O104 antigen, respectively. The development of a rapid method to detect and quantify Listeria monocytogenes, a high-risk pathogen, is the second objective. Detection of 1 CFU/ml and quantification of 10–1,000 CFU/ml in raw milk were achieved by a sample pretreatment step and quantitative PCR in about 3h. L. monocytogenes growth in raw milk was also evaluated.

Flow Field–Flow Fractionation for size analysis and characterization of nanoparticles for applications in Life Sciences

Nanotechnologies are rapidly expanding because of the opportunities that the new materials offer in many areas such as the manufacturing industry, food production, processing and preservation, and in the pharmaceutical and cosmetic industry. Size distribution of the nanoparticles determines their properties and is a fundamental parameter that needs to be monitored from the small-scale synthesis up to the bulk production and quality control of nanotech products on the market. A consequence of the increasing number of applications of nanomaterial is that the EU regulatory authorities are introducing the obligation for companies that make use of nanomaterials to acquire analytical platforms for the assessment of the size parameters of the nanomaterials. In this work, Asymmetrical Flow Field-Flow Fractionation (AF4) and Hollow Fiber F4 (HF5), hyphenated with Multiangle Light Scattering (MALS) are presented as tools for a deep functional characterization of nanoparticles. In particular, it is demonstrated the applicability of AF4-MALS for the characterization of liposomes in a wide series of mediums. Afterwards the technique is used to explore the functional features of a liposomal drug vector in terms of its biological and physical interaction with blood serum components: a comprehensive approach to understand the behavior of lipid vesicles in terms of drug release and fusion/interaction with other biological species is described, together with weaknesses and strength of the method. Afterwards the size characterization, size stability, and conjugation of azidothymidine drug molecules with a new generation of metastable drug vectors, the Metal Organic Frameworks, is discussed. Lastly, it is shown the applicability of HF5-ICP-MS for the rapid screening of samples of relevant nanorisk: rather than a deep and comprehensive characterization it this time shown a quick and smart methodology that within few steps provides qualitative information on the content of metallic nanoparticles in tattoo ink samples.

Food safety in wine: optimization of analytical controls and evaluation of production technologies

This PhD thesis has been proposed to validate and then apply innovative analytical methodologies for the determination of compounds with harmful impact on human health, such as biogenic amines and ochratoxin A in wines. Therefore, the influence of production technology (pH, amino acids precursor and use of different malolactic starters) on biogenic amines content in wines was evaluated. An HPLC method for simultaneous determination of amino acids and amines with precolumnderivatization with 9-Fluorenyl-methoxycarbonyl chloride (FMOC-Cl) and UV detection was developed. Initially, the influence of pH, time of derivatization, gradient profile were studied. In order to improve the separation of amino acids and amines and reduce the time of analysis, it was decided to study the influence of different flows and the use of different columns in the chromatographic method. Firstly, a C18 Luna column was used and later two monolithic columns Chromolith in series. It appeared to be suitable for an easy, precise and accurate determination of a relatively large number of amino acids and amines in wines. This method was then applied on different wines produced in the Emilia Romagna region. The investigation permitted to discriminate between red and white wines. Amino acids content is related to the winemaking process. Biogenic amines content in these wines does not represent a possible toxicological problem for human health. The results of the study of influence of technologies and wine composition demonstrated that pH of wines and amino acids content are the most important factors. Particularly wines with pH > 3,5 show higher concentration of biogenic amines than wines with lower pH. The enrichment of wines by nutrients also influences the content of some biogenic amines that are higher in wines added with amino acids precursors. In this study, amino acids and biogenic amines are not statistically affected by strain of lactic acid bacteria inoculated as a starter for malolactic fermentation. An evaluation of different clean-up (SPE-MycoSep; IACs and LLE) and determination methods (HPLC and ELISA) of ochratoxin A was carried out. The results obtained proved that the SPE clean-up are reliable at the same level while the LLE procedures shows lowest recovery. The ELISA method gave a lower determination and a low reproducibility than HPLC method.

Quality and safety of oils and fats obtained as co-products or by-products of the food chain and destined to animal production

The aim of the first part of this thesis was to evaluate the effect of trans fatty acid- (TFA), contaminant, polycyclic aromatic hydrocarbon (PAH)- and oxidation productenriched diets on the content of TFA and conjugated linoleic acid (CLA) isomers in meat and liver of both poultry and rabbit. The enriched feedings were prepared with preselected fatty co-and by-products that contained low and high levels of TFA (low, palm fatty acid distillate; high, hydrogenated palm fatty acid distillate), environmental contaminants (dioxins and PCBs) (two different fish oils), PAH (olive oil acid oils and pomace olive oil from chemical refining, for low and high levels) and oxidation products (sunflower-olive oil blend before and after frying), so as to obtain single feedings with three enrichment degrees (high, medium and low) of the compound of interest. This experimental set-up is a part of a large, collaborative European project (http://www.ub.edu/feedfat/), where other chemical and health parameters are assessed. Lipids were extracted, methylated with diazomethane, then transmethylated with 2N KOH/methanol and analyzed by GC and silver-ion TLC-GC. TFA and CLA were determined in the fats, the feedings, meat and liver of both poultry and rabbit. In general, the level of TFA and CLA in meat and liver mainly varied according to those originally found in the feeding fats. It must be pointed out, though, that TFA and CLA accumulation was different for the two animal species, as well as for the two types of tissues. The TFA composition of meat and liver changes according to the composition of the oils added to the feeds with some differences between species. Chicken meat with skin shows higher TFA content (2.6–5.4 fold) than rabbit meat, except for the “PAH” trial. Chicken liver shows higher TFA content (1.2–2.1 fold) than rabbit liver, except for the “TRANS” and “PAH” trials. In both chicken and rabbit meats, the TFA content was higher for the “TRANS” trial, followed by the “DIOXIN” trial. Slight differences were found on the “OXIDATION” and “PAH” trends in both types of meats. In both chicken and rabbit livers, the TFA content was higher for the “TRANS” trial, followed by those of the “PAH”, “DIOXIN” and “OXIDATION” trials. This trend, however, was not identical to that of feeds, where the TFA content varied as follows: “TRANS” > “DIOXIN” >“PAH” > “OXIDATION”. In chicken and rabbit meat samples, C18:1 TFA were the most abundant, followed by C18:2 TFA and C18:3 TFA, except for the “DIOXIN” trial where C18:3 TFA > C18:2 TFA. In chicken and rabbit liver samples of the “TRANS” and “OXIDATION” trials, C18:1 TFA were the most abundant, followed by C18:2 TFA and C18:3 TFA, whereas C18:3 TFA > C18:2 in the “DIOXIN” trial. Slight differences were found on the “PAH” trend in livers from both species. The second part of the thesis dealt with the study of lipid oxidation in washed turkey muscle added with different antioxidants. The evaluation on the oxidative stability of muscle foods found that oxidation could be measured by headspace solid phase microestraction (SPME) of hexanal and propanal. To make this method effective, an antioxidant system was added to stored muscle to stop the oxidative processes. An increase in ionic strength of the sample was also implemented to increase the concentration of aldehydes in the headspace. This method was found to be more sensitive than the commonly used thiobarbituric acid reactive substances (TBARs) method. However, after antioxidants were added and oxidation was stopped, the concentration of aldehydes decreased. It was found that the decrease in aldehyde concentration was due to the binding of the aldehydes to muscle proteins, thus decreasing the volatility and making them less detectable.