Pyrolysis-Gas Chromatography-Mass Spectometry and Chemometric Analysis for the Characterization of Complex Matrices

The present PhD thesis was focused on the development and application of chemical methodology (Py-GC-MS) and data-processing method by multivariate data analysis (chemometrics). The chromatographic and mass spectrometric data obtained with this technique are particularly suitable to be interpreted by chemometric methods such as PCA (Principal Component Analysis) as regards data exploration and SIMCA (Soft Independent Models of Class Analogy) for the classification. As a first approach, some issues related to the field of cultural heritage were discussed with a particular attention to the differentiation of binders used in pictorial field. A marker of egg tempera the phosphoric acid esterified, a pyrolysis product of lecithin, was determined using HMDS (hexamethyldisilazane) rather than the TMAH (tetramethylammonium hydroxide) as a derivatizing reagent. The validity of analytical pyrolysis as tool to characterize and classify different types of bacteria was verified. The FAMEs chromatographic profiles represent an important tool for the bacterial identification. Because of the complexity of the chromatograms, it was possible to characterize the bacteria only according to their genus, while the differentiation at the species level has been achieved by means of chemometric analysis. To perform this study, normalized areas peaks relevant to fatty acids were taken into account. Chemometric methods were applied to experimental datasets. The obtained results demonstrate the effectiveness of analytical pyrolysis and chemometric analysis for the rapid characterization of bacterial species. Application to a samples of bacterial (Pseudomonas Mendocina), fungal (Pleorotus ostreatus) and mixed- biofilms was also performed. A comparison with the chromatographic profiles established the possibility to: • Differentiate the bacterial and fungal biofilms according to the (FAMEs) profile. • Characterize the fungal biofilm by means the typical pattern of pyrolytic fragments derived from saccharides present in the cell wall. • Individuate the markers of bacterial and fungal biofilm in the same mixed-biofilm sample.

Speleogenesis and secondary cave minerals in quartz-sandstone and quartzite environment

The main objective of this research is to improve the comprehension of the processes controlling the formation of caves and karst-like morphologies in quartz-rich lithologies (more than 90% quartz), like quartz-sandstones and metamorphic quartzites. In the scientific community the processes actually most retained to be responsible of these formations are explained in the “Arenisation Theory”. This implies a slow but pervasive dissolution of the quartz grain/mineral boundaries increasing the general porosity until the rock becomes incohesive and can be easily eroded by running waters. The loose sands produced by the weathering processes are then evacuated to the surface through processes of piping due to the infiltration of waters from the fracture network or the bedding planes. To deal with these problems we adopted a multidisciplinary approach through the exploration and the study of several cave systems in different tepuis. The first step was to build a theoretical model of the arenisation process, considering the most recent knowledge about the dissolution kinetics of quartz, the intergranular/grain boundaries diffusion processes, the primary diffusion porosity, in the simplified conditions of an open fracture crossed by a continuous flow of undersatured water. The results of the model were then compared with the world’s widest dataset (more than 150 analyses) of water geochemistry collected till now on the tepui, in superficial and cave settings. All these studies allowed verifying the importance and the effectiveness of the arenisation process that is confirmed to be the main process responsible of the primary formation of these caves and of the karst-like superficial morphologies. The numerical modelling and the field observations allowed evaluating a possible age of the cave systems around 20-30 million of years.

Tecniche per il controllo dinamico del consumo di potenza per piattaforme system-on-chip

Providing support for multimedia applications on low-power mobile devices remains a significant research challenge. This is primarily due to two reasons: • Portable mobile devices have modest sizes and weights, and therefore inadequate resources, low CPU processing power, reduced display capabilities, limited memory and battery lifetimes as compared to desktop and laptop systems. • On the other hand, multimedia applications tend to have distinctive QoS and processing requirementswhichmake themextremely resource-demanding. This innate conflict introduces key research challenges in the design of multimedia applications and device-level power optimization. Energy efficiency in this kind of platforms can be achieved only via a synergistic hardware and software approach. In fact, while System-on-Chips are more and more programmable thus providing functional flexibility, hardwareonly power reduction techniques cannot maintain consumption under acceptable bounds. It is well understood both in research and industry that system configuration andmanagement cannot be controlled efficiently only relying on low-level firmware and hardware drivers. In fact, at this level there is lack of information about user application activity and consequently about the impact of power management decision on QoS. Even though operating system support and integration is a requirement for effective performance and energy management, more effective and QoSsensitive power management is possible if power awareness and hardware configuration control strategies are tightly integratedwith domain-specificmiddleware services. The main objective of this PhD research has been the exploration and the integration of amiddleware-centric energymanagement with applications and operating-system. We choose to focus on the CPU-memory and the video subsystems, since they are the most power-hungry components of an embedded system. A second main objective has been the definition and implementation of software facilities (like toolkits, API, and run-time engines) in order to improve programmability and performance efficiency of such platforms. Enhancing energy efficiency and programmability ofmodernMulti-Processor System-on-Chips (MPSoCs) Consumer applications are characterized by tight time-to-market constraints and extreme cost sensitivity. The software that runs on modern embedded systems must be high performance, real time, and even more important low power. Although much progress has been made on these problems, much remains to be done. Multi-processor System-on-Chip (MPSoC) are increasingly popular platforms for high performance embedded applications. This leads to interesting challenges in software development since efficient software development is a major issue for MPSoc designers. An important step in deploying applications on multiprocessors is to allocate and schedule concurrent tasks to the processing and communication resources of the platform. The problem of allocating and scheduling precedenceconstrained tasks on processors in a distributed real-time system is NP-hard. There is a clear need for deployment technology that addresses thesemulti processing issues. This problem can be tackled by means of specific middleware which takes care of allocating and scheduling tasks on the different processing elements and which tries also to optimize the power consumption of the entire multiprocessor platform. This dissertation is an attempt to develop insight into efficient, flexible and optimalmethods for allocating and scheduling concurrent applications tomultiprocessor architectures. It is a well-known problem in literature: this kind of optimization problems are very complex even in much simplified variants, therefore most authors propose simplified models and heuristic approaches to solve it in reasonable time. Model simplification is often achieved by abstracting away platform implementation ”details”. As a result, optimization problems become more tractable, even reaching polynomial time complexity. Unfortunately, this approach creates an abstraction gap between the optimization model and the real HW-SW platform. The main issue with heuristic or, more in general, with incomplete search is that they introduce an optimality gap of unknown size. They provide very limited or no information on the distance between the best computed solution and the optimal one. The goal of this work is to address both abstraction and optimality gaps, formulating accurate models which accounts for a number of ”non-idealities” in real-life hardware platforms, developing novel mapping algorithms that deterministically find optimal solutions, and implementing software infrastructures required by developers to deploy applications for the targetMPSoC platforms. Energy Efficient LCDBacklightAutoregulation on Real-LifeMultimediaAp- plication Processor Despite the ever increasing advances in Liquid Crystal Display’s (LCD) technology, their power consumption is still one of the major limitations to the battery life of mobile appliances such as smart phones, portable media players, gaming and navigation devices. There is a clear trend towards the increase of LCD size to exploit the multimedia capabilities of portable devices that can receive and render high definition video and pictures. Multimedia applications running on these devices require LCD screen sizes of 2.2 to 3.5 inches andmore to display video sequences and pictures with the required quality. LCD power consumption is dependent on the backlight and pixel matrix driving circuits and is typically proportional to the panel area. As a result, the contribution is also likely to be considerable in future mobile appliances. To address this issue, companies are proposing low power technologies suitable for mobile applications supporting low power states and image control techniques. On the research side, several power saving schemes and algorithms can be found in literature. Some of them exploit software-only techniques to change the image content to reduce the power associated with the crystal polarization, some others are aimed at decreasing the backlight level while compensating the luminance reduction by compensating the user perceived quality degradation using pixel-by-pixel image processing algorithms. The major limitation of these techniques is that they rely on the CPU to perform pixel-based manipulations and their impact on CPU utilization and power consumption has not been assessed. This PhDdissertation shows an alternative approach that exploits in a smart and efficient way the hardware image processing unit almost integrated in every current multimedia application processors to implement a hardware assisted image compensation that allows dynamic scaling of the backlight with a negligible impact on QoS. The proposed approach overcomes CPU-intensive techniques by saving system power without requiring either a dedicated display technology or hardware modification. Thesis Overview The remainder of the thesis is organized as follows. The first part is focused on enhancing energy efficiency and programmability of modern Multi-Processor System-on-Chips (MPSoCs). Chapter 2 gives an overview about architectural trends in embedded systems, illustrating the principal features of new technologies and the key challenges still open. Chapter 3 presents a QoS-driven methodology for optimal allocation and frequency selection for MPSoCs. The methodology is based on functional simulation and full system power estimation. Chapter 4 targets allocation and scheduling of pipelined stream-oriented applications on top of distributed memory architectures with messaging support. We tackled the complexity of the problem by means of decomposition and no-good generation, and prove the increased computational efficiency of this approach with respect to traditional ones. Chapter 5 presents a cooperative framework to solve the allocation, scheduling and voltage/frequency selection problem to optimality for energyefficient MPSoCs, while in Chapter 6 applications with conditional task graph are taken into account. Finally Chapter 7 proposes a complete framework, called Cellflow, to help programmers in efficient software implementation on a real architecture, the Cell Broadband Engine processor. The second part is focused on energy efficient software techniques for LCD displays. Chapter 8 gives an overview about portable device display technologies, illustrating the principal features of LCD video systems and the key challenges still open. Chapter 9 shows several energy efficient software techniques present in literature, while Chapter 10 illustrates in details our method for saving significant power in an LCD panel. Finally, conclusions are drawn, reporting the main research contributions that have been discussed throughout this dissertation.

Technology acquisition through licensing. Implications for firm strategy

Nowadays licensing practices have increased in importance and relevance driving the widespread diffusion of markets for technologies. Firms are shifting from a tactical to a strategic attitude towards licensing, addressing both business and corporate level objectives. The Open Innovation Paradigm has been embraced. Firms rely more and more on collaboration and external sourcing of knowledge. This new model of innovation requires firms to leverage on external technologies to unlock the potential of firms’ internal innovative efforts. In this context, firms’ competitive advantage depends both on their ability to recognize available opportunities inside and outside their boundaries and on their readiness to exploit them in order to fuel their innovation process dynamically. Licensing is one of the ways available to firm to ripe the advantages associated to an open attitude in technology strategy. From the licensee’s point view this implies challenging the so-called not-invented-here syndrome, affecting the more traditional firms that emphasize the myth of internal research and development supremacy. This also entails understanding the so-called cognitive constraints affecting the perfect functioning of markets for technologies that are associated to the costs for the assimilation, integration and exploitation of external knowledge by recipient firms. My thesis aimed at shedding light on new interesting issues associated to in-licensing activities that have been neglected by the literature on licensing and markets for technologies. The reason for this gap is associated to the “perspective bias” affecting the works within this stream of research. With very few notable exceptions, they have been generally concerned with the investigation of the so-called licensing dilemma of the licensor – whether to license out or to internally exploit the in-house developed technologies, while neglecting the licensee’s perspective. In my opinion, this has left rooms for improving the understanding of the determinants and conditions affecting licensing-in practices. From the licensee’s viewpoint, the licensing strategy deals with the search, integration, assimilation, exploitation of external technologies. As such it lies at the very hearth of firm’s technology strategy. Improving our understanding of this strategy is thus required to assess the full implications of in-licensing decisions as they shape firms’ innovation patterns and technological capabilities evolution. It also allow for understanding the so-called cognitive constraints associated to the not-invented-here syndrome. In recognition of that, the aim of my work is to contribute to the theoretical and empirical literature explaining the determinants of the licensee’s behavior, by providing a comprehensive theoretical framework as well as ad-hoc conceptual tools to understand and overcome frictions and to ease the achievement of satisfactory technology transfer agreements in the marketplace. Aiming at this, I investigate licensing-in in three different fashions developed in three research papers. In the first work, I investigate the links between licensing and the patterns of firms’ technological search diversification according to the framework of references of the Search literature, Resource-based Theory and the theory of general purpose technologies. In the second paper - that continues where the first one left off – I analyze the new concept of learning-bylicensing, in terms of development of new knowledge inside the licensee firms (e.g. new patents) some years after the acquisition of the license, according to the Dynamic Capabilities perspective. Finally, in the third study, Ideal with the determinants of the remuneration structure of patent licenses (form and amount), and in particular on the role of the upfront fee from the licensee’s perspective. Aiming at this, I combine the insights of two theoretical approaches: agency and real options theory.

La costruzione razionale della casa. Scritti e progetti di Giuseppe Pagano

The rational construction of the house. The writings and projects of Giuseppe Pagano Description, themes and research objectives The research aims at analysing the architecture of Giuseppe Pagano, which focuses on the theme of dwelling, through the reading of 3 of his house projects. On the one hand, these projects represent “minor” works not thoroughly known by Pagano’s contemporary critics; on the other they emphasise a particular methodological approach, which serves the author to explore a theme closely linked to his theoretical thought. The house project is a key to Pagano’s research, given its ties to the socio-cultural and political conditions in which the architect was working, so that it becomes a mirror of one of his specific and theoretical path, always in a state of becoming. Pagano understands architecture as a “servant of the human being”, subject to a “utilitarian slavery” since it is a clear, essential and “modest” answer to specific human needs, free from aprioristic aesthetic and formal choices. It is a rational architecture in sensu stricto; it constitutes a perfect synthesis between cause and effect and between function and form. The house needs to accommodate these principles because it is closely intertwined with human needs and intimately linked to a specific place, climatic conditions and technical and economical possibilities. Besides, differently from his public and common masterpieces such as the Palazzo Gualino, the Istituto di Fisica and the Università Commerciale Bocconi, the house projects are representative of a precise project will, which is expressed in a more authentic way, partially freed from political influences and dogmatic preoccupations and, therefore, far from the attempt to research a specific expressive language. I believe that the house project better represents that “ingenuity”, freshness and “sincerity” that Pagano identifies with the minor architecture, thereby revealing a more authentic expression of his understanding of a project. Therefore, the thesis, by tracing the theoretical research of Pagano through the analysis of some of his designed and built works, attempts to identify a specific methodological approach to Pagano’s project, which, developed through time, achieves a certain clarity in the 1930s. In fact, this methodological approach becomes more evident in his last projects, mainly regarding the house and the urban space. These reflect the attempt to respond to the new social needs and, at the same time, they also are an expression of a freer idea of built architecture, closely linked with the place and with the human being who dwells it. The three chosen projects (Villa Colli, La Casa a struttura d’acciaio and Villa Caraccio) make Pagano facing different places, different customers and different economic and technical conditions, which, given the author’s biography, correspond to important historical and political conditions. This is the reason why the projects become apparently distant works, both linguistically and conceptually, to the point that one can define them as ”eclectic”. However, I argue that this eclecticism is actually an added value to the architectural work of Pagano, steaming from the use of a method which, having as a basis the postulate of a rational architecture as essence and logic of building, finds specific variations depending on the multiple variables to be addressed by the project. This is the methodological heritage that Pagano learns from the tradition, especially that of the rural residential architecture, defined by Pagano as a “dictionary of the building logic of man”, as an “a-stylistic background”. For Pagano this traditional architecture is a clear expression of the relationships between a theme and its development, an architectural “fact” that is resolved with purely technical and utilitarian aims and with a spontaneous development far from any aprioristic theoretical principle. Architecture, therefore, cannot be an invention for Pagano and the personal contribution of each architect has to consider his/her close relationship with the specific historical context, place and new building methods. These are basic principles in the methodological approach that drives a great deal of his research and that also permits his thought to be modern. I argue that both ongoing and new collaborations with younger protagonists of the culture and architecture of the period are significant for the development of his methodology. These encounters represent the will to spread his own understanding of the “new architecture” as well as a way of self-renewal by confronting the self with new themes and realities and by learning from his collaborators. Thesis’ outline The thesis is divided in two principal parts, each articulated in four chapters attempting to offer a new reading of the theory and work of Pagano by emphasising the central themes of the research. The first chapter is an introduction to the thesis and to the theme of the rational house, as understood and developed in its typological and technical aspects by Pagano and by other protagonists of the Italian rationalism of the 1930s. Here the attention is on two different aspects defining, according to Pagano, the house project: on the one hand, the typological renewal, aimed at defining a “standard form” as a clear and essential answer to certain needs and variables of the project leading to different formal expressions. On the other, it focuses on the building, understood as a technique to “produce” architecture, where new technologies and new materials are not merely tools but also essential elements of the architectural work. In this way the villa becomes different from the theme of the common house or from that of the minimalist house, by using rules in the choice of material and in the techniques that are every time different depending on the theme under exploration and on the contingency of place. It is also visible the rigorous rationalism that distinguishes the author's appropriation of certain themes of rural architecture. The pages of “Casabella” and the events of the contemporary Triennali form the preliminary material for the writing of this chapter given that they are primary sources to individuate projects and writings produced by Pagano and contemporary architects on this theme. These writings and projects, when compared, reconstruct the evolution of the idea of the rational house and, specifically, of the personal research of Pagano. The second part regards the reading of three of Pagano’s projects of houses as a built verification of his theories. This section constitutes the central part of the thesis since it is aimed at detecting a specific methodological approach showing a theoretical and ideological evolution expressed in the vast edited literature. The three projects that have been chosen explore the theme of the house, looking at various research themes that the author proposes and that find continuity in the affirmation of a specific rationalism, focussed on concepts such as essentiality, utility, functionality and building honesty. These concepts guide the thought and the activities of Pagano, also reflecting a social and cultural period. The projects span from the theme of the villa moderna, Villa Colli, which, inspired by the architecture of North Europe, anticipates a specific rationalism of Pagano based on rigour, simplicity and essentiality, to the theme of the common house, Casa a struttura d’acciaio, la casa del domani, which ponders on the definition of new living spaces and, moreover, on new concepts of standardisation, economical efficiency and new materials responding to the changing needs of the modern society. Finally, the third project returns to the theme of the, Villa Caraccio, revisiting it with new perspectives. These perspectives find in the solution of the open plant, in the openness to nature and landscape and in the revisiting of materials and local building systems that idea of the freed house, which express clearly a new theoretical thought. Methodology It needs to be noted that due to the lack of an official Archive of Pagano’s work, the analysis of his work has been difficult and this explains the necessity to read the articles and the drawings published in the pages of «Casabella» and «Domus». As for the projects of Villa Colli and Casa a struttura d’acciaio, parts of the original drawings have been consulted. These drawings are not published and are kept in private archives of the collaborators of Pagano. The consultation of these documents has permitted the analysis of the cited works, which have been subject to a more complete reading following the different proposed solutions, which have permitted to understand the project path. The projects are analysed thought the method of comparison and critical reading which, specifically, means graphical elaborations and analytical schemes, mostly reconstructed on the basis of original projects but, where possible, also on a photographic investigation. The focus is on the project theme which, beginning with a specific living (dwelling) typology, finds variations because of the historico-political context in which Pagano is embedded and which partially shapes his research and theoretical thought, then translated in the built work. The analysis of the work follows, beginning, where possible, from a reconstruction of the evolution of the project as elaborated on the basis of the original documents and ending on an analysis of the constructive principles and composition. This second phase employs a methodology proposed by Pagano in his article Piante di ville, which, as expected, focuses on the plant as essential tool to identify the “true practical and poetic qualities of the construction”(Pagano, «Costruzioni-Casabella», 1940, p. 2). The reading of the project is integrated with the constructive analyses related to the technical aspects of the house which, in the case of Casa a struttura d’acciaio, play an important role in the project, while in Villa Colli and in Villa Caraccio are principally linked to the choice of materials for the construction of the different architectural elements. These are nonetheless key factors in the composition of the work. Future work could extend this reading to other house projects to deepen the research that could be completed with the consultation of Archival materials, which are missing at present. Finally, in the appendix I present a critical selection of the Pagano’s writings, which recall the themes discussed and embodied by the three projects. The texts have been selected among the articles published in Casabella and in other journals, completing the reading of the project work which cannot be detached from his theoretical thought. Moving from theory to project, we follow a path that brings us to define and deepen the central theme of the thesis: rational building as the principal feature of the architectural research of Pagano, which is paraphrased in multiple ways in his designed and built works.

Studio dei Vulcani di Fango per la definizione della Migrazione dei Fluidi Profondi

L’unione di approcci differenti durante lo studio dei sistemi petroliferi, come l’accoppiamento dello studio delle emissioni in superficie con le analisi geochimiche e strutturali, è un aspetto principale nelle strategie di sviluppo per la ricerca degli idrocarburi. La presenza di acqua connata nelle sequenze sedimentarie profonde e la sua sovrappressione che viene generata dalle spesse coperture sedimentarie, incrementata inoltre dalla generazione di idrocarburi in profondità, sono fattori di controllo primari per la migrazione e l’emissione di fluidi in superficie. I risultati ottenuti da questo studio forniscono nuovi elementi per la comprensione del ruolo dello studio dei vulcani di fango nell’esplorazione petrolifera, e nuove importanti prove per la caratterizzazione dei sistemi petroliferi nelle aree considerate.

Controllo Vettoriale generalizzato per Macchine Elettriche Trifase

Nell’ambito della presente tesi verrà descritto un approccio generalizzato per il controllo delle macchine elettriche trifasi; la prima parte è incentrata nello sviluppo di una metodologia di modellizzazione generale, ossia in grado di descrivere, da un punto di vista matematico, il comportamento di una generica macchina elettrica, che possa quindi includere in sé stessa tutte le caratteristiche salienti che possano caratterizzare ogni specifica tipologia di macchina elettrica. Il passo successivo è quello di realizzare un algoritmo di controllo per macchine elettriche che si poggi sulla teoria generalizzata e che utilizzi per il proprio funzionamento quelle grandezze offerte dal modello unico delle macchine elettriche. La tipologia di controllo che è stata utilizzata è quella che comunemente viene definita come controllo ad orientamento di campo (FOC), per la quale sono stati individuati degli accorgimenti atti a migliorarne le prestazioni dinamiche e di controllo della coppia erogata. Per concludere verrà presentata una serie di prove sperimentali con lo scopo di mettere in risalto alcuni aspetti cruciali nel controllo delle macchine elettriche mediante un algoritmo ad orientamento di campo e soprattutto di verificare l’attendibilità dell’approccio generalizzato alle macchine elettriche trifasi. I risultati sperimentali confermano quindi l’applicabilità del metodo a diverse tipologie di macchine (asincrone e sincrone) e sono stati verificate nelle condizioni operative più critiche: bassa velocità, alta velocità bassi carichi, dinamica lenta e dinamica veloce.

Lo sviluppo dell'allevamento in Emilia-Romagna Aspetti economici e implicazioni sociali nella gestione della risorsa animale durante l’età del Bronzo

Il dibattito sullo sviluppo delle culture dell’età del Bronzo nel territorio dell’Emilia-Romagna sta portando una rinnovata attenzione sull’area romagnola. Le indagini si sono concentrate sull’area compresa tra il fiume Panaro e il Mare Adriatico, riconoscibile nell’odierna Romagna ed in parte della bassa pianura emiliana. Si trattava un territorio strategico, un vero e proprio crocevia socio-economico fra la cultura terramaricola e quelle centro italiche di Grotta Nuova. La presente ricerca di dottorato ha portato alla ricostruzione dei sistemi di gestione e di sfruttamento delle risorse animali in Emilia-Romagna durante l’Età del Bronzo, con particolare attenzione alla definizione della capacità portante ambientale dei diversi territori indagati e delle loro modalità di sfruttamento in relazione alla razionalizzazione della pratiche di allevamento. Sono state studiate in dettaglio le filiere di trasformazione dei prodotti animali primari e secondari definendo, quindi, i caratteri delle paleoeconomie locali nel processo di evoluzione della Romagna durante l’età del Bronzo. La ricerca si è basata sullo studio archeozoologico completo su 13 siti recentemente indagati, distribuiti nelle provincie di: Bologna, Ferrara, Ravenna, Forlì/Cesena e Rimini, e su una revisione completa delle evidenze archeozoologiche prodotte da studi pregressi. Le analisi non si sono limitate al riconoscimento delle specie, ma hanno teso all’individuazione ed alla valutazione di parametri complessi per ricostruire le strategie di abbattimento e le tecniche di sfruttamento e macellazione dei diversi gruppi animali. E’ stato possibile, quindi, valutare il peso ecologico di mandrie e greggi sul territorio e l’impatto economico ed ecologico di un allevamento sempre più sistematico e razionale, sia dal punto di vista dell’organizzazione territoriale degli insediamenti, sia per quanto riguarda le ripercussioni sulla gestione delle risorse agricole ed ambientali in generale.

Essays in structural heuristics

This dissertation introduces and develops a new method of rational reconstruction called structural heuristics. Structural heuristics takes assignment of structure to any given object of investigation as the starting point for its rational reconstruction. This means to look at any given object as a system of relations and of transformation laws for those relations. The operational content of this heuristics can be summarized as follows: when facing any given system the best way to approach it is to explicitly look for a possible structure of it. The utilization of structural heuristics allows structural awareness, which is considered a fundamental epistemic disposition, as well as a fundamental condition for the rational reconstruction of systems of knowledge. In this dissertation, structural heuristics is applied to reconstructing the domain of economic knowledge. This is done by exploring four distinct areas of economic research: (i) economic axiomatics; (ii) realism in economics; (iii) production theory; (iv) economic psychology. The application of structural heuristics to these fields of economic inquiry shows the flexibility and potential of structural heuristics as epistemic tool for theoretical exploration and reconstruction.

Unveiling the unknown of cool stars with high-resolution spectroscopy

Cool giant and supergiant stars are among the brightest populations in any stellar system and they are easily observable out to large distances, especially at infrared wavelengths. These stars also dominate the integrated light of star clusters in a wide range of ages, making them powerful tracers of stellar populations in more distant galaxies. High-resolution near-IR spectroscopy is a key tool for quantitatively investigating their kinematic, evolutionary and chemical properties. However, the systematic exploration and calibration of the NIR spectral diagnostics to study these cool stellar populations based on high-resolution spectroscopy is still in its pioneering stage. Any effort to make progress in the field is innovative and of impact on stellar archaeology and stellar evolution. This PhD project takes the challenge of exploring that new parameter space and characterizing the physical properties, the chemical content and the kinematics of cool giants and supergiants in selected disc fields and clusters of our Galaxy, with the ultimate goal of tracing their past and recent star formation and chemical enrichment history. By using optical HARPS-N and near-infrared GIANO-B high-resolution stellar spectra in the context of the large program SPA-Stellar Population Astrophysics: the detailed, age-resolved chemistry of the Milky Way disk” (PI L. Origlia), an extensive study of Arcturus, a standard calibrator for red giant stars, has been performed. New diagnostics of stellar parameters as well as optimal linelists for chemical analysis have been provided. Then, such diagnostics have been used to determine evolutionary properties, detailed chemical abundances of almost 30 different elements and mixing processes of a homogeneous sample of red supergiant stars in the Perseus complex.

Gandhi nell'Atlantico Nero: geografie, movimenti, concetti

Questo lavoro ricostruisce l'uso strategico di Gandhi come “significante” nel pensiero politico dell'Atlantico Nero, nella lotta contro la supremazia bianca e nei processi di decolonizzazione. Le pratiche discorsive che hanno stretto alleanze metaforiche con il movimento gandhiano sono evidenziate come un mezzo con cui il discorso politico nero attraversa la linea di separazione tra metropoli e colonie, e sovverte la costruzione spaziale della modernità. L’analisi spazia dall'indomani della Prima guerra mondiale alla seconda metà degli anni Cinquanta. Questa parte di Secolo breve fu caratterizzata dalle due guerre mondiali, dalla Lega contro l'imperialismo e dai congressi panafricani - importanti punti di svolta che consolidarono la consapevolezza di un'esperienza comune di oppressione e sfruttamento razziale. La ricerca si concentra sui circuiti e movimenti editoriali e associativi, come i congressi panafricani (1919-1945), il movimento “New Negro”, l’UNIA di Marcus Garvey, il sindacalismo nero e i movimenti di liberazione africani - in particolare la Positive Action in Ghana, il movimento zikista in Nigeria e la Defiance Campaign in Sud Africa. Nel complesso quadro di gerarchie e idiosincrasie dell'Atlantico Nero, gli scarti semantici dell'uso di Gandhi come tropo politico sono connessi con diverse prospettive e visioni di solidarietà.

Mars delivery service - development of the electro-mechanical systems of the Sample Fetch Rover for the Mars Sample Return Campaign

This thesis describes the development of the Sample Fetch Rover (SFR), studied for Mars Sample Return (MSR), an international campaign carried out in cooperation between the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA). The focus of this document is the design of the electro-mechanical systems of the rover. After placing this work into the general context of robotic planetary exploration and summarising the state of the art for what concerns Mars rovers, the architecture of the Mars Sample Return Campaign is presented. A complete overview of the current SFR architecture is provided, touching upon all the main subsystems of the spacecraft. For each area, it is discussed what are the design drivers, the chosen solutions and whether they use heritage technology (in particular from the ExoMars Rover) or new developments. This research focuses on two topics of particular interest, due to their relevance for the mission and the novelty of their design: locomotion and sample acquisition, which are discussed in depth. The early SFR locomotion concepts are summarised, covering the initial trade-offs and discarded designs for higher traverse performance. Once a consolidated architecture was reached, the locomotion subsystem was developed further, defining the details of the suspension, actuators, deployment mechanisms and wheels. This technology is presented here in detail, including some key analysis and test results that support the design and demonstrate how it responds to the mission requirements. Another major electro-mechanical system developed as part of this work is the one dedicated to sample tube acquisition. The concept of operations of this machinery was defined to be robust against the unknown conditions that characterise the mission. The design process led to a highly automated robotic system which is described here in its main components: vision system, robotic arm and tube storage.

User scheduling for low earth orbit multi-user multiple-input-multiple-output non-terrestrial network systems

In rural and isolated areas without cellular coverage, Satellite Communication (SatCom) is the best candidate to complement terrestrial coverage. However, the main challenge for future generations of wireless networks will be to meet the growing demand for new services while dealing with the scarcity of frequency spectrum. As a result, it is critical to investigate more efficient methods of utilizing the limited bandwidth; and resource sharing is likely the only choice. The research community’s focus has recently shifted towards the interference management and exploitation paradigm to meet the increasing data traffic demands. In the Downlink (DL) and Feedspace (FS), LEO satellites with an on-board antenna array can offer service to numerous User Terminals (UTs) (VSAT or Handhelds) on-ground in FFR schemes by using cutting-edge digital beamforming techniques. Considering this setup, the adoption of an effective user scheduling approach is a critical aspect given the unusually high density of User terminals on the ground as compared to the on-board available satellite antennas. In this context, one possibility is that of exploiting clustering algorithms for scheduling in LEO MU-MIMO systems in which several users within the same group are simultaneously served by the satellite via Space Division Multiplexing (SDM), and then these different user groups are served in different time slots via Time Division Multiplexing (TDM). This thesis addresses this problem by defining a user scheduling problem as an optimization problem and discusses several algorithms to solve it. In particular, focusing on the FS and user service link (i.e., DL) of a single MB-LEO satellite operating below 6 GHz, the user scheduling problem in the Frequency Division Duplex (FDD) mode is addressed. The proposed State-of-the-Art scheduling approaches are based on graph theory. The proposed solution offers high performance in terms of per-user capacity, Sum-rate capacity, SINR, and Spectral Efficiency.

On the motion planning & control of nonlinear robotic systems

In the last decades, we saw a soaring interest in autonomous robots boosted not only by academia and industry, but also by the ever in- creasing demand from civil users. As a matter of fact, autonomous robots are fast spreading in all aspects of human life, we can see them clean houses, navigate through city traffic, or harvest fruits and vegetables. Almost all commercial drones already exhibit unprecedented and sophisticated skills which makes them suitable for these applications, such as obstacle avoidance, simultaneous localisation and mapping, path planning, visual-inertial odometry, and object tracking. The major limitations of such robotic platforms lie in the limited payload that can carry, in their costs, and in the limited autonomy due to finite battery capability. For this reason researchers start to develop new algorithms able to run even on resource constrained platforms both in terms of computation capabilities and limited types of endowed sensors, focusing especially on very cheap sensors and hardware. The possibility to use a limited number of sensors allowed to scale a lot the UAVs size, while the implementation of new efficient algorithms, performing the same task in lower time, allows for lower autonomy. However, the developed robots are not mature enough to completely operate autonomously without human supervision due to still too big dimensions (especially for aerial vehicles), which make these platforms unsafe for humans, and the high probability of numerical, and decision, errors that robots may make. In this perspective, this thesis aims to review and improve the current state-of-the-art solutions for autonomous navigation from a purely practical point of view. In particular, we deeply focused on the problems of robot control, trajectory planning, environments exploration, and obstacle avoidance.

"Contaminazione" e "Reinvenzione": ruoli critici multiculturali nella prospettiva dell'arte globale. "Caratteri cinesi" di Xu Bing, Hsiao Chin e Gu Wenda alla Biennale di Venezia

A partire dagli anni '20 del XX secolo, con la partecipazione a esposizioni internazionali, l'arte cinese ha intrapreso un'indagine approfondita sulla propria ricchezza e complessità culturale, inserendosi progressivamente nel contesto del panorama artistico globale. In questo quadro, l'adesione della Cina alla Biennale di Venezia si configura come sintesi della ricchezza culturale cinese, in cui l'impiego di opere connesse ai "Caratteri cinesi" si rivela uno strumento di divulgazione privilegiato per la propria cultura. Un'analisi dettagliata del percorso espositivo della Cina evidenzia tre momenti di rilievo legati ai "Caratteri cinesi": il "Book from the Sky" di Xu Bing (1993), "The Boat" di Hsiao Chin (2000) e "United Nations" di Gu Wenda (2017). Il presente lavoro si intende di esaminare criticamente queste tre esperienze, indagando l'interazione tra l'esplorazione culturale e la sua rappresentazione nell'ambito specifico della Biennale. Attraverso un'analisi fondata sul dibattito relativo all'arte globale e al multiculturalismo, all'arte contemporanea cinese e alla sua proiezione internazionale, nonché sullo studio della storia delle partecipazioni cinesi alle mostre internazionali e alla Biennale di Venezia a partire dal XX secolo, la ricerca si concentra sulle suddette partecipazioni legate ai "Caratteri cinesi", valutando l'impatto dei principi curatoriali della Biennale su di esse. Viene esplorato altresì il modo in cui gli artisti hanno investigato e manifestato le loro riflessioni culturali attraverso le loro opere, contribuendo al dialogo sulla diversità culturale e sull'articolazione di valori dalla prospettiva dell'arte globale contemporanea. L'analisi si sofferma sulle strategie culturali realizzate dagli artisti nel contesto delle esposizioni globalizzate, evidenziando uno stato di contaminazione culturale. L'invito è quello ad una riflessione critica e a una valutazione del suo impatto sulla reinvenzione del contributo cinese alla narrazione futura della storia dell'arte globale. In tal modo, lo studio apre nuovi orizzonti investigativi, proponendo direzioni future di ricerca.