Metrological characterization of sensors and instrumentation for distribution grid monitoring and electrical asset diagnostics

The Smart Grid needs a large amount of information to be operated and day by day new information is required to improve the operation performance. It is also fundamental that the available information is reliable and accurate. Therefore, the role of metrology is crucial, especially if applied to the distribution grid monitoring and the electrical assets diagnostics. This dissertation aims at better understanding the sensors and the instrumentation employed by the power system operators in the above-mentioned applications and studying new solutions. Concerning the research on the measurement applied to the electrical asset diagnostics: an innovative drone-based measurement system is proposed for monitoring medium voltage surge arresters. This system is described, and its metrological characterization is presented. On the other hand, the research regarding the measurements applied to the grid monitoring consists of three parts. The first part concerns the metrological characterization of the electronic energy meters’ operation under off-nominal power conditions. Original test procedures have been designed for both frequency and harmonic distortion as influence quantities, aiming at defining realistic scenarios. The second part deals with medium voltage inductive current transformers. An in-depth investigation on their accuracy behavior in presence of harmonic distortion is carried out by applying realistic current waveforms. The accuracy has been evaluated by means of the composite error index and its approximated version. Based on the same test setup, a closed-form expression for the measured current total harmonic distortion uncertainty estimation has been experimentally validated. The metrological characterization of a virtual phasor measurement unit is the subject of the third and last part: first, a calibrator has been designed and the uncertainty associated with its steady-state reference phasor has been evaluated; then this calibrator acted as a reference, and it has been used to characterize the phasor measurement unit implemented within a real-time simulator.

Designing Electricity Auctions in the Presence of Transmission Constraints

This paper analyzes the effect that different designs in the access to fnancial transmission rights has on spot electricity auctions. In particular, I characterize the equilibrium in the spot electricity market when financial transmission rights are assigned to the grid operator and when financial transmission rights are assigned to the firm that submits the lowest bid in the spot electricity auction. When financial transmission rights are assigned to the grid operator, my model, in contrast with the models available in the literature, works out the equilibrium for any transmission capacity. Moreover, I have found that an increase in transmission capacity not only increases competition between markets but also within a single market. When financial transmission rights are assigned to the firm that submits the lowest bid in the spot electricity auction, firms compete not only for electricity demand, but also for transmission rights and the arbitrage profits derived from its hold. I have found that introduce competition for transmission rights reduces competition in spot electricity auctions.

Modelling and analysis of networked control strategies in smart power distribution grids: development of co-simulation tools

This thesis is focused on Smart Grid applications in medium voltage distribution networks. For the development of new applications it appears useful the availability of simulation tools able to model dynamic behavior of both the power system and the communication network. Such a co-simulation environment would allow the assessment of the feasibility of using a given network technology to support communication-based Smart Grid control schemes on an existing segment of the electrical grid and to determine the range of control schemes that different communications technologies can support. For this reason, is presented a co-simulation platform that has been built by linking the Electromagnetic Transients Program Simulator (EMTP v3.0) with a Telecommunication Network Simulator (OPNET-Riverbed v18.0). The simulator is used to design and analyze a coordinate use of Distributed Energy Resources (DERs) for the voltage/var control (VVC) in distribution network. This thesis is focused control structure based on the use of phase measurement units (PMUs). In order to limit the required reinforcements of the communication infrastructures currently adopted by Distribution Network Operators (DNOs), the study is focused on leader-less MAS schemes that do not assign special coordinating rules to specific agents. Leader-less MAS are expected to produce more uniform communication traffic than centralized approaches that include a moderator agent. Moreover, leader-less MAS are expected to be less affected by limitations and constraint of some communication links. The developed co-simulator has allowed the definition of specific countermeasures against the limitations of the communication network, with particular reference to the latency and loss and information, for both the case of wired and wireless communication networks. Moreover, the co-simulation platform has bee also coupled with a mobility simulator in order to study specific countermeasures against the negative effects on the medium voltage/current distribution network caused by the concurrent connection of electric vehicles.

Società a partecipazione pubblica nel mercato dell'energia elettrica tra concorrenza e obblighi di servizio pubblico

La disciplina pubblicistica dell’energia elettrica presenta specificità rilevanti rispetto ad altri settori della regolazione economica. Il settore energetico si caratterizza infatti per una complessa regolazione, dovuta sia alle specificità dell’oggetto della disciplina, cioè l’energia elettrica come bene immateriale, sia alla molteplicità degli interessi pubblici coinvolti, che si innestano su fallimenti di mercato (i.e. il sistema a rete non duplicabile), sia agli obiettivi di politica internazionale e di sicurezza nazionale, che intercettano delicate interrelazioni con l’ambiente e il clima, come tutelati nel Green Deal, nelle normative europee e nazionali e negli accordi internazionali sulla decarbonizzazione e sullo sviluppo sostenibile. Inoltre, la filiera elettrica è “verticalmente integrata”, cioè suddivisa in attività diverse, cioè la produzione, il dispacciamento, la trasmissione, la distribuzione, la vendita all’ingrosso e al dettaglio di energia. Queste sono esercitate in regimi di mercato differenti: monopolio naturale (dovuto al carattere sub-additivo dei costi) per il dispacciamento, la trasmissione e la distribuzione di energia; libera concorrenza per la produzione e la vendita. L’esigenza di assicurare la concorrenza nel mercato energetico si contempera con la necessità di rispettare gli obblighi di servizio pubblico, in un delicato bilanciamento tra esigenze contrapposte. La Direttiva U.E. del 13 luglio 2009 n. 2009/72/Cee, all’art. 3, qualifica infatti la fornitura di energia elettrica come un servizio universale, attribuendo agli utenti il diritto di ricevere la fornitura e di mantenere prezzi ragionevoli, facilmente e chiaramente comparabili, trasparenti e non discriminatori.