Differenziamento macrofagico: gli effetti dei polimeri sintetici

Research for new biocompatible and easily implantable materials continuously proposes new molecules and new substances with biological, chemical and physical characteristics, that are more and more adapted to aesthetic and reconstructive surgery and to the development of biomedical devices such as cardiovascular prostheses. Two classes of polymeric biomaterials seem to meet better these requirements: “hydrogels” , which includes polyalkylimide (PAI) and polyvinylalcohol (PVA) and “elastomers”, which includes polyurethanes (PUs). The first ones in the last decade have had a great application for soft tissue augmentation, due to their similarity to this tissue for their high water content, elasticity and oxygen permeability (Dini et al., 2005). The second ones, on the contrary, are widely used in cardiovascular applications (catheters, vascular grafts, ventricular assist devices, total artificial hearts) due to their good mechanical properties and hemocompatibility (Zdrahala R.J. and Zdrahala I.J., 1999). In the biocompatibility evaluation of these synthetic polymers, that is important for its potential use in clinical applications, a fundamental aspect is the knowledge of the polymers cytotoxicity and the effect of their interaction with cells, in particular with the cell populations involved in the inflammatory responses, i.e. monocyte/macrophages. In consideration of what above said, the aim of this study is the comprehension of the in vitro effect of PAI, PVA and PU on three cell lines that represent three different stages of macrophagic differentiation: U937 pro-monocytes, THP-1 monocytes and RAW 264.7 macrophages. Cytotoxicity was evaluated by measuring the rate of viability with MTT, Neutral Red and morphological analysis at light microscope in time-course dependent experiments. The influence of these polymers on monocyte/macrophage activation in terms of cells adhesion, monocyte differentiation in macrophages, antigens distribution, aspecific phagocytosis, fluid-phase endocitosis, pro-inflammatory cytokine (TNF-α, IL-1β, IL-6) and nitric oxide (NO) release was evaluated. In conclusion, our studies have indicated that the three different polymeric biomaterials are highly biocompatible, since they scarcely affected viability of U937, THP-1 and RAW 264.7 cells. Moreover, we have found that even though hydrogels and polyurethane influences monocyte/macrophage differentiation (depending on the particular type of cell and polymer), they are immunocompatible since they not induced significantly high cytokine release. For these reasons their clinical applications are strongly encouraged.

Evaluation of bone strength: microtomographic tecniques

This thesis is a part of a larger study about the characterization of mechanical and histomorphometrical properties of bone. The main objects of this study were the bone tissue properties and its resistance to mechanical loads. Moreover, the knowledge about the equipment selected to carry out the analyses, the micro-computed tomography (micro-CT), was improved. Particular attention was given to the reliability over time of the measuring instrument. In order to understand the main characteristics of bone mechanical properties a study of the skeletal, the bones of which it is composed and biological principles that drive their formation and remodelling, was necessary. This study has led to the definition of two macro-classes describing the main components responsible for the resistance to fracture of bone: quantity and quality of bone. The study of bone quantity is the current clinical standard measure for so-called bone densitometry, and research studies have amply demonstrated that the amount of tissue is correlated with its mechanical properties of elasticity and fracture. However, the models presented in the literature, including information on the mere quantity of tissue, have often been limited in describing the mechanical behaviour. Recent investigations have underlined that also the bone-structure and the tissue-mineralization play an important role in the mechanical characterization of bone tissue. For this reason in this thesis the class defined as bone quality was mainly studied, splitting it into two sub-classes of bone structure and tissue quality. A study on bone structure was designed to identify which structural parameters, among the several presented in the literature, could be integrated with the information about quantity, in order to better describe the mechanical properties of bone. In this way, it was also possible to analyse the iteration between structure and function. It has been known for long that bone tissue is capable of remodeling and changing its internal structure according to loads, but the dynamics of these changes are still being analysed. This part of the study was aimed to identify the parameters that could quantify the structural changes of bone tissue during the development of a given disease: osteoarthritis. A study on tissue quality would have to be divided into different classes, which would require a scale of analysis not suitable for the micro-CT. For this reason the study was focused only on the mineralization of the tissue, highlighting the difference between bone density and tissue density, working in a context where there is still an ongoing scientific debate.

Physical and mineralogical changes of Hungarian monumental stones exposed to different conditions: stone-testing in-situ and under laboratory conditions

The Székesfehérvár Ruin Garden is a unique assemblage of monuments belonging to the cultural heritage of Hungary due to its important role in the Middle Ages as the coronation and burial church of the Kings of the Hungarian Christian Kingdom. It has been nominated for “National Monument” and as a consequence, its protection in the present and future is required. Moreover, it was reconstructed and expanded several times throughout Hungarian history. By a quick overview of the current state of the monument, the presence of several lithotypes can be found among the remained building and decorative stones. Therefore, the research related to the materials is crucial not only for the conservation of that specific monument but also for other historic structures in Central Europe. The current research is divided in three main parts: i) description of lithologies and their provenance, ii) physical properties testing of historic material and iii) durability tests of analogous stones obtained from active quarries. The survey of the National Monument of Székesfehérvár, focuses on the historical importance and the architecture of the monument, the different construction periods, the identification of the different building stones and their distribution in the remaining parts of the monument and it also included provenance analyses. The second one was the in situ and laboratory testing of physical properties of historic material. As a final phase samples were taken from local quarries with similar physical and mineralogical characteristics to the ones used in the monument. The three studied lithologies are: fine oolitic limestone, a coarse oolitic limestone and a red compact limestone. These stones were used for rock mechanical and durability tests under laboratory conditions. The following techniques were used: a) in-situ: Schmidt Hammer Values, moisture content measurements, DRMS, mapping (construction ages, lithotypes, weathering forms) b) laboratory: petrographic analysis, XRD, determination of real density by means of helium pycnometer and bulk density by means of mercury pycnometer, pore size distribution by mercury intrusion porosimetry and by nitrogen adsorption, water absorption, determination of open porosity, DRMS, frost resistance, ultrasonic pulse velocity test, uniaxial compressive strength test and dynamic modulus of elasticity. The results show that initial uniaxial compressive strength is not necessarily a clear indicator of the stone durability. Bedding and other lithological heterogeneities can influence the strength and durability of individual specimens. In addition, long-term behaviour is influenced by exposure conditions, fabric and, especially, the pore size distribution of each sample. Therefore, a statistic evaluation of the results is highly recommended and they should be evaluated in combination with other investigations on internal structure and micro-scale heterogeneities of the material, such as petrographic observation, ultrasound pulse velocity and porosimetry. Laboratory tests used to estimate the durability of natural stone may give a good guidance to its short-term performance but they should not be taken as an ultimate indication of the long-term behaviour of the stone. The interdisciplinary study of the results confirms that stones in the monument show deterioration in terms of mineralogy, fabric and physical properties in comparison with quarried stones. Moreover stone-testing proves compatibility between quarried and historical stones. Good correlation is observed between the non-destructive-techniques and laboratory tests results which allow us to minimize sampling and assessing the condition of the materials. Concluding, this research can contribute to the diagnostic knowledge for further studies that are needed in order to evaluate the effect of recent and future protective measures.

Mixed Mode Fracture Behaviour of Piezoelectric Materials

Piezoelectrics present an interactive electromechanical behaviour that, especially in recent years, has generated much interest since it renders these materials adapt for use in a variety of electronic and industrial applications like sensors, actuators, transducers, smart structures. Both mechanical and electric loads are generally applied on these devices and can cause high concentrations of stress, particularly in proximity of defects or inhomogeneities, such as flaws, cavities or included particles. A thorough understanding of their fracture behaviour is crucial in order to improve their performances and avoid unexpected failures. Therefore, a considerable number of research works have addressed this topic in the last decades. Most of the theoretical studies on this subject find their analytical background in the complex variable formulation of plane anisotropic elasticity. This theoretical approach bases its main origins in the pioneering works of Muskelishvili and Lekhnitskii who obtained the solution of the elastic problem in terms of independent analytic functions of complex variables. In the present work, the expressions of stresses and elastic and electric displacements are obtained as functions of complex potentials through an analytical formulation which is the application to the piezoelectric static case of an approach introduced for orthotropic materials to solve elastodynamics problems. This method can be considered an alternative to other formalisms currently used, like the Stroh’s formalism. The equilibrium equations are reduced to a first order system involving a six-dimensional vector field. After that, a similarity transformation is induced to reach three independent Cauchy-Riemann systems, so justifying the introduction of the complex variable notation. Closed form expressions of near tip stress and displacement fields are therefore obtained. In the theoretical study of cracked piezoelectric bodies, the issue of assigning consistent electric boundary conditions on the crack faces is of central importance and has been addressed by many researchers. Three different boundary conditions are commonly accepted in literature: the permeable, the impermeable and the semipermeable (“exact”) crack model. This thesis takes into considerations all the three models, comparing the results obtained and analysing the effects of the boundary condition choice on the solution. The influence of load biaxiality and of the application of a remote electric field has been studied, pointing out that both can affect to a various extent the stress fields and the angle of initial crack extension, especially when non-singular terms are retained in the expressions of the electro-elastic solution. Furthermore, two different fracture criteria are applied to the piezoelectric case, and their outcomes are compared and discussed. The work is organized as follows: Chapter 1 briefly introduces the fundamental concepts of Fracture Mechanics. Chapter 2 describes plane elasticity formalisms for an anisotropic continuum (Eshelby-Read-Shockley and Stroh) and introduces for the simplified orthotropic case the alternative formalism we want to propose. Chapter 3 outlines the Linear Theory of Piezoelectricity, its basic relations and electro-elastic equations. Chapter 4 introduces the proposed method for obtaining the expressions of stresses and elastic and electric displacements, given as functions of complex potentials. The solution is obtained in close form and non-singular terms are retained as well. Chapter 5 presents several numerical applications aimed at estimating the effect of load biaxiality, electric field, considered permittivity of the crack. Through the application of fracture criteria the influence of the above listed conditions on the response of the system and in particular on the direction of crack branching is thoroughly discussed.

Changes in tumor stiffness for early prediction of tumor response to sorafenib: a proof-of-concept study with elastosonography in an animal model of Hepatocellular Carcinoma (HCC)

Background and aims: Sorafenib is the reference therapy for advanced Hepatocellular Carcinoma (HCC). No method exists to predict in the very early period subsequent individual response. Starting from the clinical experience in humans that subcutaneous metastases may rapidly change consistency under sorafenib and that elastosonography a new ultrasound based technique allows assessment of tissue stiffness, we investigated the role of elastonography in the very early prediction of tumor response to sorafenib in a HCC animal model. Methods: HCC (Huh7 cells) subcutaneous xenografting in mice was utilized. Mice were randomized to vehicle or treatment with sorafenib when tumor size was 5-10 mm. Elastosonography (Mylab 70XVG, Esaote, Genova, Italy) of the whole tumor mass on a sagittal plane with a 10 MHz linear transducer was performed at different time points from treatment start (day 0, +2, +4, +7 and +14) until mice were sacrified (day +14), with the operator blind to treatment. In order to overcome variability in absolute elasticity measurement when assessing changes over time, values were expressed in arbitrary units as relative stiffness of the tumor tissue in comparison to the stiffness of a standard reference stand-off pad lying on the skin over the tumor. Results: Sor-treated mice showed a smaller tumor size increase at day +14 in comparison to vehicle-treated (tumor volume increase +192.76% vs +747.56%, p=0.06). Among Sor-treated tumors, 6 mice showed a better response to treatment than the other 4 (increase in volume +177% vs +553%, p=0.011). At day +2, median tumor elasticity increased in Sor-treated group (+6.69%, range –30.17-+58.51%), while decreased in the vehicle group (-3.19%, range –53.32-+37.94%) leading to a significant difference in absolute values (p=0.034). From this time point onward, elasticity decreased in both groups, with similar speed over time, not being statistically different anymore. In Sor-treated mice all 6 best responders at day 14 showed an increase in elasticity at day +2 (ranging from +3.30% to +58.51%) in comparison to baseline, whereas 3 of the 4 poorer responders showed a decrease. Interestingly, these 3 tumours showed elasticity values higher than responder tumours at day 0. Conclusions: Elastosonography appears a promising non-invasive new technique for the early prediction of HCC tumor response to sorafenib. Indeed, we proved that responder tumours are characterized by an early increase in elasticity. The possibility to distinguish a priori between responders and non responders based on the higher elasticity of the latter needs to be validated in ad-hoc experiments as well as a confirmation of our results in humans is warranted.

Terapie sistemiche dell'epatocarcinoma (HCC): dalla preclinica alla clinica

Introduzione Attualmente i principali punti critici del trattamento dell’HCC avanzato sono: 1) la mancanza di predittori di risposta alla terapia con sorafenib, 2) lo sviluppo resistenze al sorafenib, 3) la mancanza di terapie di seconda linea codificate. Scopo della tesi 1) ricerca di predittori clinico-laboratoristici di risposta al sorafenib in pazienti ambulatoriali con HCC; 2) valutazione dell’impatto della sospensione temporanea-definitiva del sorafenib in un modello murino di HCC mediante tecniche ecografiche; 3) valutazione dell’efficacia della capecitabina metronomica come seconda linea dell’HCC non responsivo a sorafenib. Risultati Studio-1: 94 pazienti con HCC trattato con sorafenib: a presenza di metastasi e PVT-neoplastica non sembra inficiare l’efficacia del sorafenib. AFP basale <19 ng/ml è risultata predittrice di maggiore sopravvivenza, mentre lo sviluppo di nausea di una peggiore sopravvivenza. Studio -2: 14 topi con xenografts di HCC: gruppo-1 trattato con placebo, gruppo-2 trattato con sorafenib con interruzione temporanea del farmaco e gruppo-3 trattato con sorafenib con sospensione definitiva del sorafenib. La CEUS targettata per il VEGFR2 ha mostrato al giorno 13 valori maggiori di dTE nel gruppo-3 confermato da un aumento del VEGFR2 al Western-Blot. I tumori del gruppo-2 dopo 2 giorni di ritrattamento, hanno mostrato un aumento dell’elasticità tissutale all’elastonografia. Studio-3:19 pazienti trattati con capecitabina metronomica dopo sorafenib. Il TTP è stato di 5 mesi (95% CI 0-10), la PFS di 3,6 mesi (95% CI 2,8-4,3) ed la OS di 6,3 mesi (95% CI 4-8,6). Conclusioni Lo sviluppo di nausea ed astenia ed AFP basale >19, sono risultati predittivi di una minore risposta al sorafenib. La sospensione temporanea del sorafenib in un modello murino di HCC non impedisce il ripristino della risposta tumorale, mentre una interruzione definitiva tende a stimolare un “effetto rebound” dell’angiogenesi. La capecitabina metronomica dopo sorafenib ha mostrato una discreta attività anti-neoplastica ed una sicurezza accettabile.

Tutela e valorizzazione delle produzioni agroalimentari di qualità attraverso strategie di brand management.Il modello Coop.

Questa tesi di dottorato verte sull'individuazione di politiche industriali atte ad implementare il mercato dei prodotti a denominazione di origine. Inevitabilmente, l’analisi economica dei prodotti agroalimentari tipici di qualità implica anche l’approfondimento e l’individuazione, delle problematiche connesse con la creazione di un valore addizionale per il consumatore, rispetto a quello dei prodotti standardizzati. Questo approccio richiama l’attenzione, da una parte, sulle caratteristiche della domanda e sulla disponibilità del consumatore a riconoscere e apprezzare questo plus-valore, dall’altra sulle strategie che l’offerta può attivare per conseguire un premium price rispetto al prodotto standardizzato. Le certificazioni comunitarie Dop, Igp e Stg oltre che il marchio di prodotto biologico racchiudono, solitamente, tali dinamiche valoriali ma sono tutt’oggi poco conosciute dai consumatori. Diversi studi internazionali dimostrano, infatti, che la maggioranza dei cittadini comunitari ignorano il significato delle certificazioni di qualità. L’ipotesi di fondo di questo studio si basa sulla possibilità di fidelizzare questi marchi con i brand della grande distribuzione già affermati, come quello di Coop. Analizzare gli effetti dell’introduzione di prodotti private label a denominazione di origine nel mercato della grande distribuzione organizzata italiana ci permetterebbe di comprendere se questo segmento di mercato può aiutare il settore delle Dop/Igp. Questo studio ha cercato di verificare se il prodotto private label a denominazione di origine, riesca a sfruttare il doppio binario di fiducia rappresentato dal marchio comunitario unito a quello dell’impresa di distribuzione. Per comprendere la propensione del consumatore a spendere di più per questi prodotti, abbiamo utilizzato l’analisi dell’elasticità della domanda sul prezzo dei dati scanner fornitici da Coop Adriatica. Siamo riusciti a dimostrare tale positivo connubio confermato anche da una indagine demoscopica effettuata ad hoc sui consumatori.

Essays in the Economics of Ageing

In the first paper, I assess if financial incentives may be used as an effective device to induce workers to postpone retirement by evaluating the Italian so called “super bonus” reform. The bonus consisted in economic incentives given for a limited period to private sector workers who had reached the requirements for seniority pension. Crucially for this study, public workers were not entitled to the bonus. Using data from the Bank of Italy Survey on Household Income andWealth, and exploiting the DID-Probit strategy proposed by Blundell et al. (JEEA, 2004), I assess the effect of the bonus on the decision to postpone retirement, by comparing private and public workers before and after the reform. Results suggest a reduction of 12ppt in the proportion of private workers who decided to retire among those qualifying for retirement. Results also suggest, not trivially, that most of the effect of the reform is driven by low-income workers. Finally, I propose an estimate of the extensive margin elasticity of Italian older workers. The second study estimates a structural reduced form of the “option value” model developed by Stock and Wise (1990) using Italian data from the Survey of Health, Ageing and Retirement in Europe (SHARE).Exploiting exogenous changes in social security wealth (SSW) results show a significant effect in the expected direction of SSW and of marginal incentives to retire. Results are robust even after controlling for individual heterogeneity and its correlation with financial incentives. Using detailed information on individuals, the results also highlights the importance of individual and job characteristics, which have been very little explored by this literature, as determinants of retirement. This suggests the potential of “tagging” in the design of social security incentives in order to reduce choice distortions and improve the overall efficiency of the system.

Responsabilita' sociale d'impresa e abitudini alimentari: contributo di Coop nella creazione di valore per i cittadini, per il territorio e i prodotti tipici di qualità

I cambiamenti e le innovazioni sociali, che hanno caratterizzato il secolo scorso, hanno generato mutamenti significativi nella struttura dei consumi, legati in particolare a una maggiore consapevolezza dei consumatori e allo scoppio della crisi economica. Assume sempre maggiore importanza, all’interno delle politiche di brand management, il ruolo della Responsabilità Sociale d’Impresa, che spinge la Grande Distribuzione Organizzata a proporre prodotti con più alti standard qualitativi e di sicurezza. Il caso analizzato è quello della linea biologica ViviVerde Coop, la cui offerta di prodotti biologici a private label ha avuto un impatto molto positivo sul mercato. L’analisi dell’elasticità della curva di domanda di alcuni di questi prodotti nel periodo gennaio 2010-maggio 2012 rivela diversi valori positivi e maggiori di 1, indice del fatto che il prezzo non abbia avuto effetti negativi sulle vendite dei prodotti considerati. Tale evidenza risulta rilevante proprio in un periodo di profonda crisi economica che ha interessato, in modo significativo, anche i consumi alimentari.

Essays on Unemployment Insurance

Can the potential availability of unemployment insurance (UI) affect the behavior of employed workers and the duration of their employment spells? After discussing few straightforward reasons why UI may affect employment duration, I apply a regression kink design (RKD) to address this question using linked employer-employee data from the Brazilian labor market. Exploiting the UI schedule, I find that potential benefit level significantly affects the duration of employment spells. This effect is local to low skilled workers and, surprisingly, indicates that a 1\% increase in unemployment benefits increases job duration by around 0.3\%. Such result is driven by the fact that higher UI decreases the probability of job quits, which are not covered by UI in Brazil. These estimates are robust to permutation tests and a number of falsification tests. I develop a reduced-form welfare formula to assess the economic relevance of this result. Based on that, I show that the positive effect on employment duration implies in a higher optimal benefit level. Moreover, the formula shows that the elasticity of employment duration impacts welfare just with the same weight as the well-known elasticity of unemployment duration to benefit level.