La ricerca del valore nell'impresa cooperativa di lavorazione e trasformazione: cooperative e imprese capitalistiche a confronto

La ricerca si propone un duplice obbiettivo: 1. provare, attraverso l’applicazione di un metodo teorico tradizionale di analisi economico-finanziaria, il livello ottimale di equilibrio finanziario fra accesso al credito esterno e capitale proprio; 2. mostrare l’utilità di alcuni strumenti finanziari partecipativi per la ricapitalizzazione dell’impresa cooperativa. Oggetto di studio è l’impresa cooperativa che si occupa di una o più fasi del processo di lavorazione, trasformazione e prima commercializzazione del prodotto agricolo conferito dai soci, confrontata con le imprese di capitali che svolgono la medesima attività. La società cooperativa e quella capitalistica saranno, pertanto analizzate in termini di liquidità generata, redditività prodotta e grado di indebitamento, attraverso il calcolo e l’analisi di una serie di indici, tratti dai rispettivi bilanci d’esercizio. È opportuno sottolineare che nella seguente trattazione sarà riservato uno spazio al tema della ricerca del valore nell’impresa cooperativa inteso come espressione della ricchezza creata dai processi aziendali in un determinato periodo di tempo tentando di definire, se esiste, una struttura finanziaria ottimale , ossia uno specifico rapporto tra indebitamento finanziario e mezzi propri, che massimizzi il valore dell’impresa. L’attenzione verso la struttura finanziaria, pertanto, non sarà solo rivolta al costo esplicito del debito o dell’equity, ma si estenderà anche alle implicazioni delle scelte di finanziamento sulle modalità di governo dell’impresa. Infatti molti studi di economia aziendale, e in particolar modo di gestione d’impresa e finanza aziendale, hanno trattato il tema dell’attività di governo dell’impresa, quale elemento in grado di contribuire alla creazione di valore non solo attraverso la selezione dei progetti d’investimento ma anche attraverso la composizione della struttura finanziaria.

Effetto crowding e dislessia evolutiva: un confronto inter e intra-linguistico

Crowding is defined as the negative effect obtained by adding visual distractors around a central target which has to be identified. Some studies have suggested the presence of a marked crowding effect in developmental dyslexia (e.g. Atkinson, 1991; Spinelli et al., 2002). Inspired by Spinelli’s (2002) experimental design, we explored the hypothesis that the crowding effect may affect dyslexics’ response times (RTs) and accuracy in identification tasks dealing with words, pseudowords, illegal non-words and symbolstrings. Moreover, our study aimed to clarify the relationship between the crowding phenomenon and the word-reading process, in an inter-language comparison perspective. For this purpose we studied twenty-two French dyslexics and twenty-two Italian dyslexics (total forty-four dyslexics), compared to forty-four subjects matched for reading level (22 French and 22 Italians) and forty-four chronological age-matched subjects (22 French and 22 Italians). Children were all tested on reading and cognitive abilities. Results showed no differences between French and Italian participants suggesting that performances were homogenous. Dyslexic children were all significantly impaired in words and pseudowords reading compared to their normal reading controls. Regarding the identification task with which we assessed crowding effect, both accuracy and RTs showed a lexicality effect which meant that the recognition of words was more accurate and faster in words than pseudowords, non-words and symbolstrings. Moreover, compared to normal readers, dyslexics’ RTs and accuracy were impaired only for verbal materials but not for non-verbal material; these results are in line with the phonological hypothesis (Griffiths & Snowling, 2002; Snowling, 2000; 2006) . RTs revealed a general crowding effect (RTs in the crowding condition were slower than those recorded in the isolated condition) affecting all the subjects’ performances. This effect, however, emerged to be not specific for dyslexics. Data didn’t reveal a significant effect of language, allowing the generalization of the obtained results. We also analyzed the performance of two subgroups of dyslexics, categorized according to their reading abilities. The two subgroups produced different results regarding the crowding effect and type of material, suggesting that it is meaningful to take into account also the heterogeneity of the dyslexia disorder. Finally, we also analyzed the relationship of the identification task with both reading and cognitive abilities. In conclusion, this study points out the importance of comparing visual tasks performances of dyslexic participants with those of their reading level-matched controls. This approach may improve our comprehension of the potential causal link between crowding and reading (Goswami, 2003).

Kiwifruit bud release from dormancy: effect of exogenous cytokinins

A new formulate containing citokinins, that is commercialized as Cytokin, has been introduced as dormancy breaking agents. During a three-years study, Cytokin was applied at different concentrations and application times in two producing areas of the Emilia-Romagna region to verify its efficacy as a DBA. Cytokin application increased the bud break and showed a lateral flower thinning effect. Moreover, treated vines showed an earlier and more uniform flowering as compared to control ones. Results obtained on the productive performance revealed a constant positive effect in the fruit fresh weight at harvest. Moreover, Cytokin did not cause any phytotoxicity even at the highest concentrations. Starting from the field observation, which suggested the involvement of cytokinins in kiwifruit bud release from dormancy, 6-BA was applied in open field condition and molecular and histological analyses were carried out in kiwifruit buds collected starting from the endo dormant period up to complete bud break to compare the natural occurring situation to the one induced by exogenous cytokinin application. In details, molecular analyses were set up on to verify the expression of genes involved in the reactivation of cell cycle: cyclin D3, histone H4, cyclin-dependent kinase B, as well as of others which are known to be up regulated during bud release in other species, i.e.isopenteniltransferases (IPTs), which catalyze the first step in the CK biosynthesis, and sucrose synthase 1 and A, which are involved in the sugar supplied. Moreover, histological analyses of the cell division rate in kiwifruit bud apical meristems were performed. These analyses showed a reactivation of the cell divisions during bud release and changes in the expression level of the investigated genes.

Effect of rearing techniques and feed composition on productive traits, bird welfare and quality of poultry products

The PhD project was focused on the study of the poultry welfare conditions and improvements. The project work was divided into 3 main research activities. A) Field evaluation of chicken meat rearing conditions kept in intensive farms. Considering the lack of published reports concerning the overall Italian rearing conditions of broiler chickens, a survey was carried out to assess the welfare conditions of broiler reared in the most important poultry companies in Italy to verify if they are in accordance with the advices given in the European proposal COM (2005) 221 final. Chicken farm conditions, carcass lesions and meat quality were investigated. 1. The densities currently used in Italy are in accordance with the European proposal COM 221 final (2005) which suggests to keep broilers at a density lower than 30-32 kg live weight/m2 and to not exceed 38-40 kg live weight/m2. 2. The mortality rates in summer and winter agree with the mortality score calculated following the formula reported in the EU Proposal COM 221 final (2005). 3. The incidence of damaged carcasses was very low and did not seem related to the stocking density. 4. The FPD scores were generally above the maximum limit advised by the EU proposal COM 221 final (2005), although the stocking densities were lower than 30-32 kg live weight per m2. 5. It can be stated that the control of the environmental conditions, particularly litter quality, appears a key issue to control the onset of foot dermatitis. B) Manipulation of several farm parameters, such litter material and depth, stocking density and light regimen to improve the chicken welfare conditions, in winter season. 1. Even though 2 different stocking densities were established in this study, the performances achieved from the chickens were almost identical among groups. 2. The FCR was significantly better in Standard conditions contrarily to birds reared in Welfare conditions with lower stocking density, more litter material and with a light program of 16 hours light and 8 hours dark. 3. In our trial, in Standard groups we observed a higher content of moisture, nitrogen and ammonia released from the litter. Therefore it can be assumed that the environmental characteristics have been positively changed by the improvements of the rearing conditions adopted for Welfare groups. 4. In Welfare groups the exhausted litters of the pens were dryer and broilers showed a lower occurrence of FPD. 5. The prevalence of hock burn lesions, like FPD, is high with poor litter quality conditions. 6. The combined effect of a lower stocking density, a greater amount of litter material and a photoperiod similar to the natural one, have positively influenced the chickens welfare status, as a matter of fact the occurrence of FPD in Welfare groups was the lowest keeping the score under the European threshold of the proposal COM 221 final(2005). C) The purpose of the third research was to study the effect of high or low stocking density of broiler chickens, different types of litter and the adoption of short or long lighting regimen on broiler welfare through the evaluation of their productivity and incidence of foot pad dermatitis during the hot season. 1. The feed efficiency was better for the Low Density than for High Density broilers. 2. The appearance of FPD was not influenced by stocking density. 3. The foot examination revealed that the lesions occurred more in birds maintained on chopped wheat straw than on wood shaving. 4. In conclusion, the adoptions of a short light regimen similar to that occurring in nature during summer reduces the feed intake without modify the growth rate thus improving the feed efficiency. Foot pad lesion were not affected neither by stocking densities nor by light regimens whereas wood shavings exerted a favourable effect in preserving foot pad in good condition. D) A study was carried out to investigate more widely the possible role of 25-hydroxycholecalciferol supplemented in the diet of a laying hen commercial strain (Lohmann brown) in comparison of diets supplemented with D3 or with D3 + 25- hydroxycholecalciferol. Egg traits during a productive cycle as well as the bone characteristics of the layers have been as well evaluated to determine if there the vitamin D3 may enhance the welfare status of the birds. 1. The weight of the egg and of its components is often greater in hens fed a diet enriched with 25-hydroxycholecalciferol. 2. Since eggs of treated groups are heavier and a larger amount of shell is needed, a direct effect on shell strength is observed. 3. At 30 and at 50 wk of age hens fed 25 hydroxycholecalciferol exhibited greater values of bone breaking force. 4. Radiographic density values obtained in the trial are always higher in hens fed with 25-hydroxycholecalciferol of both treatments: supplemented for the whole laying cycle (25D3) or from 40 weeks of age onward (D3+25D3).

Organic heterostructure approach for multifunctional light-emitting field-effect transistors

The possibility of combining different functionalities in a single device is of great relevance for further development of organic electronics in integrated components and circuitry. Organic light-emitting transistors (OLETs) have been demonstrated to be able to combine in a single device the electrical switching functionality of a field-effect transistor and the capability of light generation. A novel strategy in OLET realization is the tri-layer vertical hetero-junction. This configuration is similar to the bi-layer except for the presence of a new middle layer between the two transport layers. This “recombination” layer presents high emission quantum efficiency and OLED-like (Organic Light-Emitting Diode) vertical bulk mobility value. The key idea of the vertical tri-layer hetero-junction approach in realizing OLETs is that each layer has to be optimized according to its specific function (charge transport, energy transfer, radiative exciton recombination). Clearly, matching the overall device characteristics with the functional properties of the single materials composing the active region of the OFET, is a great challenge that requires a deep investigation of the morphological, optical and electrical features of the system. As in the case of the bi-layer based OLETs, it is clear that the interfaces between the dielectric and the bottom transport layer and between the recombination and the top transport layer are crucial for guaranteeing good ambipolar field-effect electrical characteristics. Moreover interfaces between the bottom transport and the recombination layer and between the recombination and the top transport layer should provide the favourable conditions for the charge percolation to happen in the recombination layer and form excitons. Organic light emitting transistor based on the tri-layer approach with external quantum efficiency out-performing the OLED state of the art has been recently demonstrated [Capelli et al., Nat. Mater. 9 (2010) 496-503] widening the scientific and technological interest in this field of research.

Marine biodiversity survey in the Northern Red Sea: a large-scale monitoring carried out in collaboration with volunteer divers

Concerns over global change and its effect on coral reef survivorship have highlighted the need for long-term datasets and proxy records, to interpret environmental trends and inform policymakers. Citizen science programs have showed to be a valid method for collecting data, reducing financial and time costs for institutions. This study is based on the elaboration of data collected by recreational divers and its main purpose is to evaluate changes in the state of coral reef biodiversity in the Red Sea over a long term period and validate the volunteer-based monitoring method. Volunteers recreational divers completed a questionnaire after each dive, recording the presence of 72 animal taxa and negative reef conditions. Comparisons were made between records from volunteers and independent records from a marine biologist who performed the same dive at the same time. A total of 500 volunteers were tested in 78 validation trials. Relative values of accuracy, reliability and similarity seem to be comparable to those performed by volunteer divers on precise transects in other projects, or in community-based terrestrial monitoring. 9301 recreational divers participated in the monitoring program, completing 23,059 survey questionnaires in a 5-year period. The volunteer-sightings-based index showed significant differences between the geographical areas. The area of Hurghada is distinguished by a medium-low biodiversity index, heavily damaged by a not controlled anthropic exploitation. Coral reefs along the Ras Mohammed National Park at Sharm el Sheikh, conversely showed high biodiversity index. The detected pattern seems to be correlated with the conservation measures adopted. In our experience and that of other research institutes, citizen science can integrate conventional methods and significantly reduce costs and time. Involving recreational divers we were able to build a large data set, covering a wide geographic area. The main limitation remains the difficulty of obtaining an homogeneous spatial sampling distribution.

The Effect of Support Measures on Involvement in Technology Transfer

The present PhD dissertation is dedicated to the general topic of knowledge transfer from academia to industry and the role of various measures at both institutional and university levels in support of commercialization of university research. The overall contribution of the present dissertation work refers to presenting an in-depth and comprehensive analysis of the main critical issues that currently exist with regard to commercial exploitation of academic research, while providing evidence on the role of previously underexplored areas (e.g. strategic use of academic patents; female academic patenting) in a general debate on the ways to successful knowledge transfer from academia to industry. The first paper, included in the present PhD dissertation, aims to address this gap by developing a taxonomy of literature, based on a comprehensive review of the existing body of research on government measures in support of knowledge transfer from academia to industry. The results of the review reveal that there is a considerable gap in the analysis of the impact and relative effectiveness of the public policy measures, especially in what regards the measures aimed at building knowledge and expertise among academic faculty and technology transfer agents. The second paper, presented as a part of the dissertation, focuses on the role of interorganizational collaborations and their effect on the likelihood of an academic patent to remain unused, and points to the strategic management of patents by universities. In the third paper I turn to the issue of female participation in patenting and commercialization; in particular, I find evidence on the positive role of university and its internal support structures in closing the gender gap in female academic patenting. The results of the research, carried out for the present dissertation, provide important implications for policy makers in crafting measures to increase the efficient use of university knowledge stock.

Optimization of purification procedures in organic semiconductor synthesis for improving the performances of organic field-effect transistors

The aim of the research activity focused on the investigation of the correlation between the degree of purity in terms of chemical dopants in organic small molecule semiconductors and their electrical and optoelectronic performances once introduced as active material in devices. The first step of the work was addressed to the study of the electrical performances variation of two commercial organic semiconductors after being processed by means of thermal sublimation process. In particular, the p-type 2,2′′′-Dihexyl-2,2′:5′,2′′:5′′,2′′′-quaterthiophene (DH4T) semiconductor and the n-type 2,2′′′- Perfluoro-Dihexyl-2,2′:5′,2′′:5′′,2′′′-quaterthiophene (DFH4T) semiconductor underwent several sublimation cycles, with consequent improvement of the electrical performances in terms of charge mobility and threshold voltage, highlighting the benefits brought by this treatment to the electric properties of the discussed semiconductors in OFET devices by the removal of residual impurities. The second step consisted in the provision of a metal-free synthesis of DH4T, which was successfully prepared without organometallic reagents or catalysts in collaboration with Dr. Manuela Melucci from ISOF-CNR Institute in Bologna. Indeed the experimental work demonstrated that those compounds are responsible for the electrical degradation by intentionally doping the semiconductor obtained by metal-free method by Tetrakis(triphenylphosphine)palladium(0) (Pd(PPh3)4) and Tributyltin chloride (Bu3SnCl), as well as with an organic impurity, like 5-hexyl-2,2':5',2''-terthiophene (HexT3) at, in different concentrations (1, 5 and 10% w/w). After completing the entire evaluation process loop, from fabricating OFET devices by vacuum sublimation with implemented intentionally-doped batches to the final electrical characterization in inherent-atmosphere conditions, commercial DH4T, metal-free DH4T and the intentionally-doped DH4T were systematically compared. Indeed, the fabrication of OFET based on doped DH4T clearly pointed out that the vacuum sublimation is still an inherent and efficient purification method for crude semiconductors, but also a reliable way to fabricate high performing devices.

Interfacial interactions, charge transport and growth phenomena in Organic Field Effect Transistors

Organic electronics is an emerging field with a vast number of applications having high potential for commercial success. Although an enormous progress has been made in this research area, many organic electronic applications such as organic opto-electronic devices, organic field effect transistors and organic bioelectronic devices still require further optimization to fulfill the requirements for successful commercialization. The main bottle neck that hinders large scale production of these devices is their performances and stability. The performance of the organic devices largely depends on the charge transport processes occurring at the interfaces of various material that it is composed of. As a result, the key ingredient needed for a successful improvement in the performance and stability of organic electronic devices is an in-depth knowledge of the interfacial interactions and the charge transport phenomena taking place at different interfaces. The aim of this thesis is to address the role of the various interfaces between different material in determining the charge transport properties of organic devices. In this framework, I chose an Organic Field Effect Transistor (OFET) as a model system to carry out this study as it An OFET offers various interfaces that can be investigated as it is made up of stacked layers of various material. In order to probe the intrinsic properties that governs the charge transport, we have to be able to carry out thorough investigation of the interactions taking place down at the accumulation layer thickness. However, since organic materials are highly instable in ambient conditions, it becomes quite impossible to investigate the intrinsic properties of the material without the influence of extrinsic factors like air, moisture and light. For this reason, I have employed a technique called the in situ real-time electrical characterization technique which enables electrical characterization of the OFET during the growth of the semiconductor.