Tumori primitivi multipli del polmone. Profilo clinico e biologico in pazienti affetti da neoplasie polmonari multiple. Analisi di elementi clinici e marcatori biologici come possibili fattori di differenziazione dei tumori polmonari multipli

Background: MPLC represents a diagnostic challenge. Topic of the discussion is how to distinguish these patients as a metastatic or a multifocal disease. While in case of the different histology there are less doubt on the opposite in case of same histology is mandatory to investigate on other clinical features to rule out this question. Matherials and Methods: A retrospective review identified all patients treated surgically for a presumed diagnosis of SPLC. Pre-operative staging was obtained with Total CT scan and fluoro-deoxy positron emission tomography and mediastinoscopy. Patients with nodes interest or extra-thoracic location were excluded from this study. Epidermal growth factor receptor (EGFR) expression with complete immunohistochemical analisis was evaluated. Survival was estimated using Kaplan-Meyer method, and clinical features were estimated using a long-rank test or Cox proportional hazards model for categorical and continuous variable, respectively. Results: According to American College Chest Physician, 18 patients underwent to surgical resection for a diagnosis of MPLC. Of these, 8 patients had 3 or more nodules while 10 patients had less than 3 nodules. Pathologic examination demonstrated that 13/18(70%) of patients with multiple histological types was Adenocarcinoma, 2/18(10%) Squamous carcinoma, 2/18(10%) large cell carcinoma and 1/18(5%) Adenosquamosu carcinoma. Expression of EGFR has been evaluated in all nodules: in 7 patients of 18 (38%) the percentage of expression of each nodule resulted different. Conclusions: MPLC represent a multifocal disease where interactions of clinical informations with biological studies reinforce the diagnosis. EGFR could contribute to differentiate the nodules. However, further researches are necessary to validate this hypothesis.

The assessment of change in rural landscape and the analysis of the driving forces. Proposal of a spatial model for the rural built environment

The presented study carried out an analysis on rural landscape changes. In particular the study focuses on the understanding of driving forces acting on the rural built environment using a statistical spatial model implemented through GIS techniques. It is well known that the study of landscape changes is essential for a conscious decision making in land planning. From a bibliography review results a general lack of studies dealing with the modeling of rural built environment and hence a theoretical modelling approach for such purpose is needed. The advancement in technology and modernity in building construction and agriculture have gradually changed the rural built environment. In addition, the phenomenon of urbanization of a determined the construction of new volumes that occurred beside abandoned or derelict rural buildings. Consequently there are two types of transformation dynamics affecting mainly the rural built environment that can be observed: the conversion of rural buildings and the increasing of building numbers. It is the specific aim of the presented study to propose a methodology for the development of a spatial model that allows the identification of driving forces that acted on the behaviours of the building allocation. In fact one of the most concerning dynamic nowadays is related to an irrational expansion of buildings sprawl across landscape. The proposed methodology is composed by some conceptual steps that cover different aspects related to the development of a spatial model: the selection of a response variable that better describe the phenomenon under study, the identification of possible driving forces, the sampling methodology concerning the collection of data, the most suitable algorithm to be adopted in relation to statistical theory and method used, the calibration process and evaluation of the model. A different combination of factors in various parts of the territory generated favourable or less favourable conditions for the building allocation and the existence of buildings represents the evidence of such optimum. Conversely the absence of buildings expresses a combination of agents which is not suitable for building allocation. Presence or absence of buildings can be adopted as indicators of such driving conditions, since they represent the expression of the action of driving forces in the land suitability sorting process. The existence of correlation between site selection and hypothetical driving forces, evaluated by means of modeling techniques, provides an evidence of which driving forces are involved in the allocation dynamic and an insight on their level of influence into the process. GIS software by means of spatial analysis tools allows to associate the concept of presence and absence with point futures generating a point process. Presence or absence of buildings at some site locations represent the expression of these driving factors interaction. In case of presences, points represent locations of real existing buildings, conversely absences represent locations were buildings are not existent and so they are generated by a stochastic mechanism. Possible driving forces are selected and the existence of a causal relationship with building allocations is assessed through a spatial model. The adoption of empirical statistical models provides a mechanism for the explanatory variable analysis and for the identification of key driving variables behind the site selection process for new building allocation. The model developed by following the methodology is applied to a case study to test the validity of the methodology. In particular the study area for the testing of the methodology is represented by the New District of Imola characterized by a prevailing agricultural production vocation and were transformation dynamic intensively occurred. The development of the model involved the identification of predictive variables (related to geomorphologic, socio-economic, structural and infrastructural systems of landscape) capable of representing the driving forces responsible for landscape changes.. The calibration of the model is carried out referring to spatial data regarding the periurban and rural area of the study area within the 1975-2005 time period by means of Generalised linear model. The resulting output from the model fit is continuous grid surface where cells assume values ranged from 0 to 1 of probability of building occurrences along the rural and periurban area of the study area. Hence the response variable assesses the changes in the rural built environment occurred in such time interval and is correlated to the selected explanatory variables by means of a generalized linear model using logistic regression. Comparing the probability map obtained from the model to the actual rural building distribution in 2005, the interpretation capability of the model can be evaluated. The proposed model can be also applied to the interpretation of trends which occurred in other study areas, and also referring to different time intervals, depending on the availability of data. The use of suitable data in terms of time, information, and spatial resolution and the costs related to data acquisition, pre-processing, and survey are among the most critical aspects of model implementation. Future in-depth studies can focus on using the proposed model to predict short/medium-range future scenarios for the rural built environment distribution in the study area. In order to predict future scenarios it is necessary to assume that the driving forces do not change and that their levels of influence within the model are not far from those assessed for the time interval used for the calibration.

Il ruolo delle idee e del loro cambiamento nei processi di policy making universitario nel mondo anglosassone dagli anni ottanta ad oggi. I casi di Inghilterra e Nuova Zelanda in prospettiva comparata

THE TITLE OF MY THESIS IS THE ROLE OF THE IDEAS AND THEIR CHANGE IN HIGHER EDUCATION POLICY-MAKING PROCESSES FROM THE EIGHTIES TO PRESENT-DAY: THE CASES OF ENGLAND AND NEW ZEALAND IN COMPARATIVE PERSPECTIVE UNDER A THEORETICAL POINT OF VIEW, THE AIM OF MY WORK IS TO CARRY OUT A RESEARCH MODELLED ON THE CONSTRUCTIVIST THEORY. IT FOCUSES ON THE ANALYSIS OF THE IMPACT OF IDEAS ON THE PROCESSES OF POLICY MAKING BY MEANS OF EPISTEMIC COMMUNITIES, THINK TANKS AND VARIOUS SOCIOECONOMIC CONTEXTS THAT MAY HAVE PLAYED A KEY ROLE IN THE CONSTRUCTION OF THE DIFFERENT PATHS. FROM MY POINT OF VIEW IDEAS CONSTITUTE A PRIORITY RESEARCH FIELD WHICH IS WORTH ANALYSING SINCE THEIR ROLE IN POLICY MAKING PROCESSES HAS BEEN TRADITIONALLY RATHER UNEXPLORED. IN THIS CONTEXT AND WITH THE AIM OF DEVELOPING A RESEARCH STRAND BASED ON THE ROLE OF IDEAS, I INTEND TO CARRY ON MY STUDY UNDER THE PERSPECTIVE OF CHANGE. DEPENDING ON THE DATA AND INFORMATION THAT I COLLECTED I EVALUATED THE WEIGHT OF EACH OF THESE VARIABLES AND MAYBE OTHERS SUCH AS THE INSTITUTIONS AND THE INDIVIDUAL INTERESTS, WHICH MAY HAVE INFLUENCED THE FORMATION OF THE POLICY MAKING PROCESSES. UNDER THIS LIGHT, I PLANNED TO ADOPT THE QUALITATIVE METHODOLOGY OF RESEARCH WHICH I BELIEVE TO BE VERY EFFECTIVE AGAINST THE MORE DIFFICULT AND POSSIBLY REDUCTIVE APPLICATION OF QUANTITIVE DATA SETS. I RECKON THEREFORE THAT THE MOST APPROPRIATE TOOLS FOR INFORMATION PROCESSING INCLUDE CONTENT ANALYSIS, AND IN-DEPTH INTERVIEWS TO PERSONALITIES OF THE POLITICAL PANORAMA (ÉLITE OR NOT) WHO HAVE PARTICIPATED IN THE PROCESS OF HIGHER EDUCATION REFORM FROM THE EIGHTIES TO PRESENT-DAY. THE TWO CASES TAKEN INTO CONSIDERATION SURELY SET AN EXAMPLE OF RADICAL REFORM PROCESSES WHICH HAVE OCCURRED IN QUITE DIFFERENT CONTEXTS DETERMINED BY THE SOCIOECONOMIC CHARACTERISTICS AND THE TRAITS OF THE ÉLITE. IN NEW ZEALAND THE DESCRIBED PROCESS HAS TAKEN PLACE WITH A STEADY PACE AND A GOOD GRADE OF CONSEQUANTIALITY, IN LINE WTH THE REFORMS IN OTHER STATE DIVISIONS DRIVEN BY THE IDEAS OF THE NEW PUBLIC MANAGEMENT. CONTRARILY IN ENGLAND THE REFORMATIVE ACTION OF MARGARET THATCHER HAS ACQUIRED A VERY RADICAL CONNOTATION AS IT HAS BROUGHT INTO THE AMBIT OF HIGHER EDUCATION POLICY CONCEPTS LIKE EFFICIENCY, EXCELLENCE, RATIONALIZATION THAT WOULD CONTRAST WITH THE GENERALISTIC AND MASS-ORIENTED IDEAS THAT WERE FASHIONABLE DURING THE SEVENTIES. THE MISSION I INTEND TO ACCOMPLISH THORUGHOUT MY RESEARCH IS TO INVESTIGATE AND ANALYSE INTO MORE DEPTH THE DIFFERENCES THAT SEEM TO EMERGE FROM TWO CONTEXTS WHICH MOST OF THE LITERATURE REGARDS AS A SINGLE MODEL: THE ANGLO-SAXON MODEL. UNDER THIS LIGHT, THE DENSE ANALYSIS OF POLICY PROCESSES ALLOWED TO BRING OUT BOTH THE CONTROVERSIAL AND CONTRASTING ASPECTS OF THE TWO REALITIES COMPARED, AND THE ROLE AND WEIGHT OF VARIABLES SUCH AS IDEAS (MAIN VARIABLE), INSTITUTIONAL SETTINGS AND INDIVIDUAL INTERESTS ACTING IN EACH CONTEXT. THE CASES I MEAN TO ATTEND PRESENT PECULIAR ASPECTS WORTH DEVELOPING AN IN-DEPTH ANALYSIS, AN OUTLINE OF WHICH WILL BE PROVIDED IN THIS ABSTRACT. ENGLAND THE CONSERVATIVE GOVERNMENT, SINCE 1981, INTRODUCED RADICAL CHANGES IN THE SECTOR OF HIGHER EDUCATION: FIRST CUTTING DOWN ON STATE FUNDINGS AND THEN WITH THE CREATION OF AN INSTITUTION FOR THE PLANNING AND LEADERSHIP OF THE POLYTECHNICS (NON-UNIVERSITY SECTOR). AFTERWARDS THE SCHOOL REFORM BY MARGARET THATCHER IN 1988 RAISED TO A GREAT STIR ALL OVER EUROPE DUE TO BOTH ITS CONSIDERABLE INNOVATIVE IMPRINT AND THE STRONG ATTACK AGAINST THE PEDAGOGY OF THE ‘ACTIVE’ SCHOOLING AND PROGRESSIVE EDUCATION, UNTIL THEN RECOGNIZED AS A MERIT OF THE BRITISH PUBLIC SCHOOL. IN THE AMBIT OF UNIVERSITY EDUCATION THIS REFORM, TOGETHER WITH SIMILAR MEASURES BROUGHT IN DURING 1992, PUT INTO PRACTICE THE CONSERVATIVE PRINCIPLES THROUGH A SERIES OF ACTIONS THAT INCLUDED: THE SUPPRESSION OF THE IRREMOVABILITY PRINCIPLE FOR UNIVERSITY TEACHERS; THE INTRODUCTION OF STUDENT LOANS FOR LOW-INCOME STUDENTS AND THE CANCELLATION OF THE CLEAR DISTINCTION BETWEEN UNIVERSITIES AND POLYTECHNICS. THE POLICIES OF THE LABOUR MAJORITY OF MR BLAIR DID NOT QUITE DIVERGE FROM THE CONSERVATIVES’ POSITION. IN 2003 BLAIR’S CABINET RISKED TO BECOME A MINORITY RIGHT ON THE OCCASION OF AN IMPORTANT UNIVERSITY REFORM PROPOSAL. THIS PROPOSAL WOULD FORESEE THE AUTONOMY FOR THE UNIVERSITIES TO RAISE UP TO 3.000 POUNDS THE ENROLMENT FEES FOR STUDENTS (WHILE FORMERLY THE CEILING WAS 1.125 POUNDS). BLAIR HAD TO FACE INTERNAL OPPOSITION WITHIN HIS OWN PARTY IN RELATION TO A MEASURE THAT, ACCORDING TO THE 150 MPS PROMOTERS OF AN ADVERSE MOTION, HAD NOT BEEN INCLUDED IN THE ELECTORAL PROGRAMME AND WOULD RISK CREATING INCOME-BASED DISCRIMINATION AMONG STUDENTS. AS A MATTER OF FACT THE BILL FOCUSED ON THE INTRODUCTION OF VERY LOW-INTEREST STUDENT LOANS TO BE SETTLED ONLY WHEN THE STUDENT WOULD HAVE FOUND A REMUNERATED OCCUPATION (A SYSTEM ALREADY PROVIDED FOR BY THE AUSTRALIAN LEGISLATION). NEW ZEALAND CONTRARILY TO MANY OTHER COUNTRIES, NEW ZEALAND HAS ADOPTED A VERY WIDE VISION OF THE TERTIARY EDUCATION. IT INCLUDES IN FACT THE FULL EDUCATIONAL PROGRAMME THAT IS INTERNATIONALLY RECOGNIZED AS THE POST-SECONDARY EDUCATION. SHOULD WE SPOTLIGHT A PECULIARITY OF THE NEW ZEALAND TERTIARY EDUCATION POLICY THEN IT WOULD BE ‘CHANGE’. LOOKING AT THE REFORM HISTORY RELATED TO THE TERTIARY EDUCATION SYSTEM, WE CAN CLEARLY IDENTIFY FOUR ‘SUB-PERIODS’ FROM THE EIGHTIES TO PRESENT-DAY: 1. BEFORE THE 80S’: AN ELITARIAN SYSTEM CHARACTERIZED BY LOW PARTICIPATION RATES. 2. BETWEEN MID AND LATE 80S’: A TREND TOWARDS THE ENLARGEMENT OF PARTICIPATION ASSOCIATED TO A GREATER COMPETITION. 3. 1990-1999: A FUTHER STEP TOWARDS A COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM. 4. FROM 2000 TO TODAY: A CONTINUOUS EVOLUTION TOWARDS A MORE COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM TOGETHER WITH A GROWING ATTENTION TO STATE CONTROL FOR SOCIAL AND ECONOMIC DEVELOPMENT OF THE NATION. AT PRESENT THE GOVERNMENT OF NEW ZEALAND OPERATES TO STRENGHTHEN THIS PROCESS, PRIMARILY IN RELATION TO THE ROLE OF TERTIARY EDUCATION AS A STEADY FACTOR OF NATIONAL WALFARE, WHERE PROFESSIONAL DEVELOPMENT CONTRIBUTES ACTIVELY TO THE GROWTH OF THE NATIONAL ECONOMIC SYSTEM5. THE CASES OF ENGLAND AND NEW ZEALAND ARE THE FOCUS OF AN IN-DEPTH INVESTIGATION THAT STARTS FROM AN ANALYSIS OF THE POLICIES OF EACH NATION AND DEVELOP INTO A COMPARATIVE STUDY. AT THIS POINT I ATTEMPT TO DRAW SOME PRELIMINARY IMPRESSIONS ON THE FACTS ESSENTIALLY DECRIBED ABOVE. THE UNIVERSITY POLICIES IN ENGLAND AND NEW ZEALAND HAVE BOTH UNDERGONE A SIGNIFICANT REFORMATORY PROCESS SINCE THE EARLY EIGHTIES; IN BOTH CONTEXTS THE IMPORTANCE OF IDEAS THAT CONSTITUTED THE BASE OF POLITICS UNTIL 1980 WAS QUITE RELEVANT. GENERALLY SPEAKING, IN BOTH CASES THE PRE-REFORM POLICIES WERE INSPIRED BY EGALITARIANISM AND EXPANSION OF THE STUDENT POPULATION WHILE THOSE BROUGHT IN BY THE REFORM WOULD PURSUE EFFICIENCY, QUALITY AND COMPETITIVENESS. UNDOUBTEDLY, IN LINE WITH THIS GENERAL TENDENCY THAT REFLECTS THE HYPOTHESIS PROPOSED, THE TWO UNIVERSITY SYSTEMS PRESENT SEVERAL DIFFERENCES. THE UNIVERSITY SYSTEM IN NEW ZEALAND PROCEEDED STEADILY TOWARDS THE IMPLEMENTATION OF A MANAGERIAL CONCEPTION OF TERTIARY EDUCATION, ESPECIALLY FROM 1996 ONWARDS, IN ACCORDANCE WITH THE REFORMATORY PROCESS OF THE WHOLE PUBLIC SECTOR. IN THE UNITED KINGDOM, AS IN THE REST OF EUROPE, THE NEW APPROACH TO UNIVERSITY POLICY-MAKING HAD TO CONFRONT A DEEP-ROOTED TRADITION OF PROGRESSIVE EDUCATION AND THE IDEA OF EDUCATION EXPANSION THAT IN FACT DOMINATED UNTIL THE EIGHTIES. FROM THIS VIEW POINT THE GOVERNING ACTION OF MARGARET THATCHER GAVE RISE TO A RADICAL CHANGE THAT REVOLUTIONIZED THE OBJECTIVES AND KEY VALUES OF THE WHOLE EDUCATIONAL SYSTEM, IN PARTICULAR IN THE HIGHER EDUCATION SECTOR. IDEAS AS EFFICIENCY, EXCELLENCE AND CONTROL OF THE PERFORMANCE BECAME DECISIVE. THE LABOUR CABINETS OF BLAIR DEVELOPED IN THE WAKE OF CONSERVATIVE REFORMS. THIS APPEARS TO BE A FOCAL POINT OF THIS STUDY THAT OBSERVES HOW ALSO IN NEW ZEALAND THE REFORMING PROCESS OCCURRED TRANSVERSELY DURING PROGRESSIVE AND CONSERVATIVE ADMINISTRATIONS. THE PRELIMINARY IMPRESSION IS THEREFORE THAT IDEAS DEEPLY MARK THE REFORMATIVE PROCESSES: THE AIM OF MY RESEARCH IS TO VERIFY TO WHICH EXTENT THIS STATEMENT IS TRUE. IN ORDER TO BUILD A COMPREHENSIVE ANALYLIS, FURTHER SIGNIFICANT FACTORS WILL HAVE TO BE INVESTIGATED: THE WAY IDEAS ARE PERCEIVED AND IMPLEMENTED BY THE DIFFERENT POLITICAL ELITES; HOW THE VARIOUS SOCIOECONOMIC CONTEXTS INFLUENCE THE REFORMATIVE PROCESS; HOW THE INSTITUTIONAL STRUCTURES CONDITION THE POLICY-MAKING PROCESSES; WHETHER INDIVIDUAL INTERESTS PLAY A ROLE AND, IF YES, TO WHICH EXTENT.

A bayesian model for mixed responses and skew laten variable to measure HRQoL in children

The aim of the thesi is to formulate a suitable Item Response Theory (IRT) based model to measure HRQoL (as latent variable) using a mixed responses questionnaire and relaxing the hypothesis of normal distributed latent variable. The new model is a combination of two models already presented in literature, that is, a latent trait model for mixed responses and an IRT model for Skew Normal latent variable. It is developed in a Bayesian framework, a Markov chain Monte Carlo procedure is used to generate samples of the posterior distribution of the parameters of interest. The proposed model is test on a questionnaire composed by 5 discrete items and one continuous to measure HRQoL in children, the EQ-5D-Y questionnaire. A large sample of children collected in the schools was used. In comparison with a model for only discrete responses and a model for mixed responses and normal latent variable, the new model has better performances, in term of deviance information criterion (DIC), chain convergences times and precision of the estimates.

Comparative Analysis of Alternative Hybrid Systems for Automotive Applications

The main objective of this work was to investigate the impact of different hybridization concepts and levels of hybridization on fuel economy of a standard road vehicle where both conventional and non-conventional hybrid architectures are treated exactly in the same way from the point of view of overall energy flow optimization. Hybrid component models were developed and presented in detail as well as the simulations results mainly for NEDC cycle. The analysis was performed on four different parallel hybrid powertrain concepts: Hybrid Electric Vehicle (HEV), High Speed Flywheel Hybrid Vehicle (HSF-HV), Hydraulic Hybrid Vehicle (HHV) and Pneumatic Hybrid Vehicle (PHV). In order to perform equitable analysis of different hybrid systems, comparison was performed also on the basis of the same usable system energy storage capacity (i.e. 625kJ for HEV, HSF and the HHV) but in the case of pneumatic hybrid systems maximal storage capacity was limited by the size of the systems in order to comply with the packaging requirements of the vehicle. The simulations were performed within the IAV Gmbh - VeLoDyn software simulator based on Matlab / Simulink software package. Advanced cycle independent control strategy (ECMS) was implemented into the hybrid supervisory control unit in order to solve power management problem for all hybrid powertrain solutions. In order to maintain State of Charge within desired boundaries during different cycles and to facilitate easy implementation and recalibration of the control strategy for very different hybrid systems, Charge Sustaining Algorithm was added into the ECMS framework. Also, a Variable Shift Pattern VSP-ECMS algorithm was proposed as an extension of ECMS capabilities so as to include gear selection into the determination of minimal (energy) cost function of the hybrid system. Further, cycle-based energetic analysis was performed in all the simulated cases, and the results have been reported in the corresponding chapters.

Middleware for quality-based context distribution in mobile systems

The continuous advancements and enhancements of wireless systems are enabling new compelling scenarios where mobile services can adapt according to the current execution context, represented by the computational resources available at the local device, current physical location, people in physical proximity, and so forth. Such services called context-aware require the timely delivery of all relevant information describing the current context, and that introduces several unsolved complexities, spanning from low-level context data transmission up to context data storage and replication into the mobile system. In addition, to ensure correct and scalable context provisioning, it is crucial to integrate and interoperate with different wireless technologies (WiFi, Bluetooth, etc.) and modes (infrastructure-based and ad-hoc), and to use decentralized solutions to store and replicate context data on mobile devices. These challenges call for novel middleware solutions, here called Context Data Distribution Infrastructures (CDDIs), capable of delivering relevant context data to mobile devices, while hiding all the issues introduced by data distribution in heterogeneous and large-scale mobile settings. This dissertation thoroughly analyzes CDDIs for mobile systems, with the main goal of achieving a holistic approach to the design of such type of middleware solutions. We discuss the main functions needed by context data distribution in large mobile systems, and we claim the precise definition and clean respect of quality-based contracts between context consumers and CDDI to reconfigure main middleware components at runtime. We present the design and the implementation of our proposals, both in simulation-based and in real-world scenarios, along with an extensive evaluation that confirms the technical soundness of proposed CDDI solutions. Finally, we consider three highly heterogeneous scenarios, namely disaster areas, smart campuses, and smart cities, to better remark the wide technical validity of our analysis and solutions under different network deployments and quality constraints.

Biodegradable systems for the development of functional materials

This PhD work was aimed to design, develop, and characterize gelatin-based scaffolds, for the repair of defects in the muscle-skeletal system. Gelatin is a biopolymer widely used for pharmaceutical and medical applications, thanks to its biodegradability and biocompatibility. It is obtained from collagen via thermal denaturation or chemical-physical degradation. Despite its high potential as biomaterial, gelatin exhibits poor mechanical properties and a low resistance in aqueous environment. Crosslinking treatment and enrichment with reinforcement materials are thus required for biomedical applications. In this work, gelatin based scaffolds were prepared following three different strategies: films were prepared through the solvent casting method, electrospinning technique was applied for the preparation of porous mats, and 3D porous scaffolds were prepared through freeze-drying. The results obtained on films put into evidence the influence of pH, crosslinking and reinforcement with montmorillonite (MMT), on the structure, stability and mechanical properties of gelatin and MMT/gelatin composites. The information acquired on the effect of crosslinking in different conditions was utilized to optimize the preparation procedure of electrospun and freeze-dried scaffolds. A successful method was developed to prepare gelatin nanofibrous scaffolds electrospun from acetic acid/water solution and stabilized with a non-toxic crosslinking agent, genipin, able to preserve their original morphology after exposure to water. Moreover, the co-electrospinning technique was used to prepare nanofibrous scaffolds at variable content of gelatin and polylactic acid. Preliminary in vitro tests indicated that the scaffolds are suitable for cartilage tissue engineering, and that their potential applications can be extended to cartilage-bone interface tissue engineering. Finally, 3D porous gelatin scaffolds, enriched with calcium phosphate, were prepared with the freeze-drying method. The results indicated that the crystallinity of the inorganic phase influences porosity, interconnectivity and mechanical properties. Preliminary in vitro tests show good osteoblast response in terms of proliferation and adhesion on all the scaffolds.

The Dynamics of Passive Torsional Fatigue Test Rigs: Innovative Applications of Universal Joints

The dynamics of a passive back-to-back test rig have been characterised, leading to a multi-coordinate approach for the analysis of arbitrary test configurations. Universal joints have been introduced into a typical pre-loaded back-to-back system in order to produce an oscillating torsional moment in a test specimen. Two different arrangements have been investigated using a frequency-based sub-structuring approach: the receptance method. A numerical model has been developed in accordance with this theory, allowing interconnection of systems with two-coordinates and closed multi-loop schemes. The model calculates the receptance functions and modal and deflected shapes of a general system. Closed form expressions of the following individual elements have been developed: a servomotor, damped continuous shaft and a universal joint. Numerical results for specific cases have been compared with published data in literature and experimental measurements undertaken in the present work. Due to the complexity of the universal joint and its oscillating dynamic effects, a more detailed analysis of this component has been developed. Two models have been presented. The first represents the joint as two inertias connected by a massless cross-piece. The second, derived by the dynamic analysis of a spherical four-link mechanism, considers the contribution of the floating element and its gyroscopic effects. An investigation into non-linear behaviour has led to a time domain model that utilises the Runge-Kutta fourth order method for resolution of the dynamic equations. It has been demonstrated that the torsional receptances of a universal joint, derived using the simple model, result in representation of the joint as an equivalent variable inertia. In order to verify the model, a test rig has been built and experimental validation undertaken. The variable inertia of a universal joint has lead to a novel application of the component as a passive device for the balancing of inertia variations in slider-crank mechanisms.

Theoretical and Experimental Analysis of micro-CHP Energy Systems

In the framework of the micro-CHP (Combined Heat and Power) energy systems and the Distributed Generation (GD) concept, an Integrated Energy System (IES) able to meet the energy and thermal requirements of specific users, using different types of fuel to feed several micro-CHP energy sources, with the integration of electric generators of renewable energy sources (RES), electrical and thermal storage systems and the control system was conceived and built. A 5 kWel Polymer Electrolyte Membrane Fuel Cell (PEMFC) has been studied. Using experimental data obtained from various measurement campaign, the electrical and CHP PEMFC system performance have been determinate. The analysis of the effect of the water management of the anodic exhaust at variable FC loads has been carried out, and the purge process programming logic was optimized, leading also to the determination of the optimal flooding times by varying the AC FC power delivered by the cell. Furthermore, the degradation mechanisms of the PEMFC system, in particular due to the flooding of the anodic side, have been assessed using an algorithm that considers the FC like a black box, and it is able to determine the amount of not-reacted H2 and, therefore, the causes which produce that. Using experimental data that cover a two-year time span, the ageing suffered by the FC system has been tested and analyzed.