Nuovi catalizzatori per l'idrogenazione, l'idrogenolisi/ring-opening di composti aromatici policiclici

The removal of aromatic hydrocarbons from diesel has received considerable attention after environmental regulations that require petroleum refiners to raise cetane number and to limit aromatics in diesel fuel in order to improve combustion efficiency and reduce particulate and NOx emissions. An alternative is blending with Fischer–Tropsch (FT) gas-to-liquid diesel fuel; however, this option may not be economically viable solution in case of extensive blend. Another alternative is to incorporate in the diesel pool a greater fraction of the so-called light cycle oil (LCO). Due to its high aromatics content and its low cetane number (typically between 20 and 30), the incorporation of LCO may have a negative impact on the quality of diesel. Current technologies for LCO improvement are based on hydrogenation to adjust both sulphur and cetane number but while an important fraction of the aromatics present in LCO can be saturated in a deep hydrogenation process, the cetane number may still be lower than the target values specified in diesel legislations, so further upgrading is needed. An interesting technology for improving the cetane number of diesels and maintaining meanwhile high diesel yields is achieved by combining a complete hydrogenation process with a selective ring opening (SRO) reaction of the naphthenic rings. The SRO can be defined as naphthene ring-opening to form compounds with high cetane number, but without any carbon losses. Controlling the interconversion of six- and five- membered rings via an acid-catalyzed ring-contraction step is also of great importance, since selective conversion of six-membered to five-membered naphthene rings greatly influences ring-opening rates and selectivity. High intrinsic activity may be enhanced by deposition of noble metals on acidic, high surface area supports, because it is possible to arrange close proximity of the metal and acid sites. Moreover, in large-pore supports, the diffusion resistance of liquid reactants into the pores is minimized. In addition to metal centres, the acid sites of support also plays role in aromatics hydrogenation. However, the functions of different kinds of acid sites (Brønsted vs. Lewis acidity), and their optimal concentrations and strengths, remain unclear. In the present study we investigated the upgrading of an aromatic-rich feedstock over different type of metal supported on mesoporous silica-alumina. The selective hydrogenolysis and ring opening of tetrahydronaphthalene (THN or tetralin) was carried out as representative of LCO fractions after deep hydrogenation process. In this regards the aim of this study is to evaluate both the effect of metals and that of the supports characterized by different acid distribution and strength, on conversion and selectivity. For this purpose a series of catalysts were prepared by impregnation. The catalysts were characterized and conversion tests of THN were performed in a lab-scale plant operating in the pressure range from 7.0-5.0 MPa and in the temperature range from 300 to 360°C.

Application of different instrumental techniques to the selective evaluation of bio-sensible compounds in foodstuff of animal and vegetable origin

This PhD thesis describes the application of some instrumental analytical techniques suitable to the study of fundamental food products for the human diet, such as: extra virgin olive oil and dairy products. These products, widely spread in the market and with high nutritional values, are increasingly recognized healthy properties although their lipid fraction might contain some unfavorable components to the human health. The research activity has been structured in the following investigations: “Comparison of different techniques for trans fatty acids analysis” “Fatty acids analysis of outcrop milk cream samples, with particular emphasis on the content of Conjugated Linoleic Acid (CLA) and trans Fatty Acids (TFA), by using 100m high-polarity capillary column” “Evaluation of the oxidited fatty acids (OFA) content during the Parmigiano-Reggiano cheese seasoning” “Direct analysis of 4-desmethyl sterols and two dihydroxy triterpenes in saponified vegetal oils (olive oil and others) using liquid chromatography-mass spectrometry” “Quantitation of long chain poly-unsatured fatty acids (LC-PUFA) in base infant formulas by Gas Chromatography, and evaluation of the blending phases accuracy during their preparation” “Fatty acids composition of Parmigiano Reggiano cheese samples, with emphasis on trans isomers (TFA)”

Letteratura postmoderna e comunicazione pubblicitaria, problemi teorici e analisi testuali

Premise: In the literary works of our anthropological and cultural imagination, the various languages and the different discursive practices are not necessarily quoted, expressly alluded to or declared through clear expressive mechanisms; instead, they rather constitute a substratum, a background, now consolidated, which with irony and intertextuality shines through the thematic and formal elements of each text. The various contaminations, hybridizations and promptings that we find in the expressive forms, the rhetorical procedures and the linguistic and thematic choices of post-modern literary texts are shaped as fluid and familiar categories. Exchanges and passages are no longer only allowed but also inevitable; the post-modern imagination is made up of an agglomeration of discourses that are no longer really separable, built up from texts that blend and quote one another, composing, each with its own specificities, the great family of the cultural products of our social scenario. A literary work, therefore, is not only a whole phenomenon, delimited hic et nunc by a beginning and an ending, but is a fragment of that complex, dense and boundless network that is given by the continual interrelations between human forms of communication and symbolization. The research hypothesis: A vision is delineated of comparative literature as a discipline attentive to the social contexts in which texts take shape and move and to the media-type consistency that literary phenomena inevitably take on. Hence literature is seen as an open systematicity that chooses to be contaminated by other languages and other discursive practices of an imagination that is more than ever polymorphic and irregular. Inside this interpretative framework the aim is to focus the analysis on the relationship that postmodern literature establishes with advertising discourse. On one side post-modern literature is inserted in the world of communication, loudly asserting the blending and reciprocal contamination of literary modes with media ones, absorbing their languages and signification practices, translating them now into thematic nuclei, motifs and sub-motifs and now into formal expedients and new narrative choices; on the other side advertising is chosen as a signification practice of the media universe, which since the 1960s has actively contributed to shaping the dynamics of our socio-cultural scenarios, in terms which are just as important as those of other discursive practices. Advertising has always been a form of communication and symbolization that draws on the collective imagination – myths, actors and values – turning them into specific narrative programs for its own texts. Hence the aim is to interpret and analyze this relationship both from a strictly thematic perspective – and therefore trying to understand what literature speaks about when it speaks about advertising, and seeking advertising quotations in post-modern fiction – and from a formal perspective, with a search for parallels and discordances between the rhetorical procedures, the languages and the verifiable stylistic choices in the texts of the two different signification practices. The analysis method chosen, for the purpose of constructive multiplication of the perspectives, aims to approach the analytical processes of semiotics, applying, when possible, the instruments of the latter, in order to highlight the thematic and formal relationships between literature and advertising. The corpus: The corpus of the literary texts is made up of various novels and, although attention is focused on the post-modern period, there will also be ineludible quotations from essential authors that with their works prompted various reflections: H. De Balzac, Zola, Fitzgerald, Joyce, Calvino, etc… However, the analysis focuses the corpus on three authors: Don DeLillo, Martin Amis and Aldo Nove, and in particular the followings novels: “Americana” (1971) and “Underworld” (1999) by Don DeLillo, “Money” (1984) by Martin Amis and “Woobinda and other stories without a happy ending” (1996) and “Superwoobinda” (1998) by Aldo Nove. The corpus selection is restricted to these novels for two fundamental reasons: 1. assuming parameters of spatio-temporal evaluation, the texts are representative of different socio-cultural contexts and collective imaginations (from the masterly glimpses of American life by DeLillo, to the examples of contemporary Italian life by Nove, down to the English imagination of Amis) and of different historical moments (the 1970s of DeLillo’s Americana, the 1980s of Amis, down to the 1990s of Nove, decades often used as criteria of division of postmodernism into phases); 2. adopting a perspective of strictly thematic analysis, as mentioned in the research hypothesis, the variations and the constants in the novels (thematic nuclei, topoi, images and narrative developments) frequently speak of advertising and inside the narrative plot they affirm various expressions and realizations of it: value ones, thematic ones, textual ones, urban ones, etc… In these novels the themes and the processes of signification of advertising discourse pervade time, space and the relationships that the narrator character builds around him. We are looking at “particle-characters” whose endless facets attest the influence and contamination of advertising in a large part of the narrative developments of the plot: on everyday life, on the processes of acquisition and encoding of the reality, on ideological and cultural baggage, on the relationships and interchanges with the other characters, etc… Often the characters are victims of the implacable consequentiality of the advertising mechanism, since the latter gets the upper hand over the usual processes of communication, which are overwhelmed by it, wittingly or unwittingly (for example: disturbing openings in which the protagonist kills his or her parents on the basis of a spot, former advertisers that live life codifying it through the commercial mechanisms of products, sons and daughters of advertisers that as children instead of playing outside for whole nights saw tapes of spots.) Hence the analysis arises from the text and aims to show how much the developments and the narrative plots of the novels encode, elaborate and recount the myths, the values and the narrative programs of advertising discourse, transforming them into novel components in their own right. And also starting from the text a socio-cultural reference context is delineated, a collective imagination that is different, now geographically, now historically, and from comparison between them the aim is to deduce the constants, the similarities and the variations in the relationship between literature and advertising.

Correlazioni tra proprietá reologiche, struttura e processabilitá di blend di LLDPE/LDPE

Polymer blends constitute a valuable way to produce relatively low cost new materials. A still open question concerns the miscibility of polyethylene blends. Deviations from the log-additivity rule of the newtonian viscosity are often taken as a signature of immiscibility of the two components. The aim of this thesis is to characterize the rheological behavior in shear and elongation of five series of LLDPE/LDPE blends whose parent polymers have been chosen with different viscosity and SCB content and length. Synergistic effects have been measured for both zero shear viscosity and melt strength. Both SCB length and viscosity ratio between the components have been found to be key parameters for the miscibility of the pure polymers. In particular the miscibility increases with increasing SCB length and with decreasing the LDPE molecular weight and viscosity. This rheological behavior has significant effects on the processability window of these blends when the uni or biaxial elongational flows are involved. The film blowing is one of the processes for which the synergistic effects above mentioned can be crucial. Small scale experiments of film blowing performed for one of the series of blends has demonstrated that the positive deviation of the melt strength enlarges the processability window. In particular, the bubble stability was found to improve or disappear when the melt strength of the samples increased. The blending of LDPE and LLDPE can even reduce undesired melt flow instability phenomena widening, as a consequence, the processability window in extrusion. One of the series of blends has been characterized by means of capillary rheometry in order to allow a careful morphological analysis of the surface of the extruded polymer jets by means of Scanning Electron Microscopy (SEM) with the aim to detect the very early stages of the small scale melt instabilty at low shear rates (sharksin) and to follow its subsequent evolution as long as the shear rate was increased. With this experimental procedure it was possible to evaluate the shear rate ranges corresponding to different flow regions: smooth extrudate surface (absence of instability), sharkskin (small scale instability produced at the capillary exit), stick-slip transition (instability involving the whole capillary wall) and gross melt fracture (i.e. a large scale "upstream" instability originating from the entrance region of the capillary). A quantitative map was finally worked out using which an assessment of the flow type for a given shear rate and blend composition can be predicted.

Continuity and Change in New Products

This doctoral dissertation is triggered by an emergent problem: how can firms reinvent themselves? Continuity- and change-oriented decisions fundamentally shape overtime the activities and potential revenues of organizations and other adaptive systems, but both types of actions draw upon limited resources and rely on different organizational routines and capabilities. Most organizations appear to have difficulties in making tradeoffs, so that it is easier to overinvest in one of them than to successfully achieve a mixture of both. Nevertheless, theory and empirical evidence suggest that too little of either may reduce performance, indicating a need to learn more about how organizations reconcile these tensions. In the first paper, I moved from the consideration that rapid changes in competitive environments increasingly require firms to be “ambidextrous” implementing organizational mechanisms and structures that allow continuity- and change-oriented activities to be engaged at the same time. More specifically, I show that continuity- and change-related decisions can’t be confined either inside or outside the firm, but span overtime across distinct decision domains located within and beyond the organizational boundaries. Reconciling static and dynamic perspectives of ambidexterity, I conceptualize a firm’s strategy as a bundle of decisions about product attributes and components of the production team, proposing a multidimensional and dynamic model of structural ambidexterity that explains why and how firms could manage conflicting pressures for continuity and change in the context of new products. In the second study I note how rigorous systematic evidence documenting the success of ambidextrous organizations is lacking, and there has been very little investigation of how firms deal with continuity and change in new products. How to manage the transition form a successful product to another? What to change and what to keep? Incumbents that deal with series of products over time need to update their offerings in order to have the most relevant attributes to prospect clients without disappoint the current customer base. They need to both match and anticipate consumers’ preferences, blending something old with something new to satisfy the current demand and enlarge the herd by appealing to newer audiences. This paper contributes to strategic renewal and ambidexterity-related research with the first empirically assessment of a positive consumer response to ambidexterity in new products. Also, this study provides a practical method to monitor overtime the degree to which a brand or a firm is continuity- or change- oriented and evaluate different strategy profiles across two decision domains that play a pivotal role in new products: product attributes and components of the production team.

Towards Rapid Environmental Assessment and Coastal Forecasting in the Northern Adriatic Sea

A new Coastal Rapid Environmental Assessment (CREA) strategy has been developed and successfully applied to the Northern Adriatic Sea. CREA strategy exploits the recent advent of operational oceanography to establish a CREA system based on an operational regional forecasting system and coastal monitoring networks of opportunity. The methodology wishes to initialize a coastal high resolution model, nested within the regional forecasting system, blending the large scale parent model fields with the available coastal observations to generate the requisite field estimates. CREA modeling system consists of a high resolution, O(800m), Adriatic SHELF model (ASHELF) implemented into the Northern Adriatic basin and nested within the Adriatic Forecasting System (AFS) (Oddo et al. 2006). The observational system is composed by the coastal networks established in the framework of ADRICOSM (ADRiatic sea integrated COastal areaS and river basin Managment system) Pilot Project. An assimilation technique exerts a correction of the initial field provided by AFS on the basis of the available observations. The blending of the two data sets has been carried out through a multi-scale optimal interpolation technique developed by Mariano and Brown (1992). Two CREA weekly exercises have been conducted: the first, at the beginning of May (spring experiment); the second in middle August (summer experiment). The weeks have been chosen looking at the availability of all coastal observations in the initialization day and one week later to validate model results, verifying our predictive skills. ASHELF spin up time has been investigated too, through a dedicated experiment, in order to obtain the maximum forecast accuracy within a minimum time. Energetic evaluations show that for the Northern Adriatic Sea and for the forcing applied, a spin-up period of one week allows ASHELF to generate new circulation features enabled by the increased resolution and its total kinetic energy to establish a new dynamical balance. CREA results, evaluated by mean of standard statistics between ASHELF and coastal CTDs, show improvement deriving from the initialization technique and a good model performance in the coastal areas of the Northern Adriatic basin, characterized by a shallow and wide continental shelf subject to substantial freshwater influence from rivers. Results demonstrate the feasibility of our CREA strategy to support coastal zone management and wish an additional establishment of operational coastal monitoring activities to advance it.

Novel etheroatom containing aliphatic polyesters for biomedical and environmental applications

Biodegradable polymers for short time applications have attracted much interest all over the world. The reason behind this growing interest is the incompatibility of the polymeric wastes with the environment where they are disposed after usage. Synthetic aliphatic polyesters represent one of the most economically competitive biodegradable polymers. In addition, they gained considerable attention as they combine biodegradability and biocompatibility with interesting physical and chemical properties. In this framework, the present research work focused on the modification by reactive blending and polycondensation of two different aliphatic polyesters, namely poly(butylene succinate) (PBS) and poly(butylene 1,4-cyclohexanedicarboxylate) (PBCE). Both are characterized by good thermal properties, but their mechanical characteristics do not fit the requirements for applications in which high flexibility is requested and, moreover, both show slow biodegradation rate. With the aim of developing new materials with improved characteristics with respect to the parent homopolymers, novel etheroatom containing PBS and PBCE-based fully aliphatic polyesters and copolyesters have been therefore synthesized and carefully characterized. The introduction of oxygen or sulphur atoms along the polymer chains, by acting on chemical composition or molecular architecture, tailored solid-state properties and biodegradation rate: type and amount of comonomeric units and sequence distribution deeply affected the material final properties owing, among all, to the hydrophobic/hydrophilic ratio and to the different ability of the polymer to crystallize. The versatility of the synthesized copolymers has been well proved: as a matter of fact these polymers can be exploited both for biomedical and ecological applications. Feasibility of 3D electrospun scaffolds has been investigated, biocompatibility studies and controlled release of a model molecule showed good responses. As regards ecological applications, barrier properties and eco-toxicological assessments have been conducted with outstanding results. Finally, the ability of the novel polyesters to undergo both hydrolytic and enzymatic degradation has been demonstrated under physiological and environmental conditions.

Studio della patogenesi di HIV-1 nel compartimento osseo: effetti della terapia antiretrovirale convenzionale e nuovi approcci all'eradicazione

L’obiettivo della tesi è studiare il virus HIV-1 in relazione alle alterazioni sistemiche, riscontrate nel paziente HIV-infetto, in particolare alterazioni a carico del sistema scheletrico, indotte dal virus o dall’azione dei farmaci utilizzati nella terapia antiretrovirale (HAART). L’incidenza dell’osteoporosi nei pazienti HIV-positivi è drammaticamente elevata rispetto alla popolazione sana. Studi clinici hanno evidenziato come alcuni farmaci, ad esempio inibitori della proteasi virale, portino alla compromissione dell’omeostasi ossea, con aumento del rischio fratturativo. Il nostro studio prevede un follow-up di 12 mesi dall’inizio della HAART in una coorte di pazienti naïve, monitorando diversi markers ossei. I risultati ottenuti mostrano un incremento dei markers metabolici del turnover osseo, confermando l’impatto della HAART sull’omeostasi ossea. Successivamente abbiamo focalizzato la nostra attenzione sugli osteoblasti, il citotipo che regola la sintesi di nuova matrice ossea. Gli esperimenti condotti sulla linea HOBIT mettono in evidenza come il trattamento, in particolare con inibitori della proteasi, porti ad apoptosi nel caso in cui vi sia una concentrazione di farmaco maggiore di quella fisiologica. Tuttavia, anche concentrazioni fisiologiche di farmaci possono regolare negativamente alcuni marker ossei, come ALP e osteocalcina. Infine esiste la problematica dell’eradicazione di HIV-1 dai reservoirs virali. La HAART riesce a controllare i livelli viremici, ciononostante diversi studi propongono alcuni citotipi come potenziali reservoir di infezione, vanificando l’effetto della terapia. Abbiamo, perciò, sviluppato un nuovo approccio molecolare all’eradicazione: sfruttare l’enzima virale integrasi per riconoscere in modo selettivo le sequenze LTR virali per colpire il virus integrato. Fondendo integrasi e l’endonucleasi FokI, abbiamo generato diversi cloni. Questi sono stati transfettati stabilmente in cellule Jurkat, suscettibili all’infezione. Una volta infettate, abbiamo ottenuto una significativa riduzione dei markers di infezione. Successivamente la transfezione nella linea linfoblastica 8E5/LAV, che porta integrata nel genoma una copia di HIV, ha dato risultati molto incoraggianti, come la forte riduzione del DNA virale integrato.

Structure-property relations in polymers from renewable resources

The present research project focuses its attention on the study of structure-property relations in polymers from renewable sources (bio-based polymers) such as polymers microbially produced, i.e. polyhydrohyalkanoates (PHAs) or chemically synthesized using monomers from renewable sources, i.e. polyammide 11 (PA11). By means of a broad spectrum of experimental techniques, the influence of different modifications on bio-based polymers such as blending with other components, copolymerization with different co-monomers and introduction of branching to yield complex architectures have been investigated. The present work on PHAs focused on the study of the dependence of polymer properties on both the fermentation process conditions (e.g. bacterial strain and carbon substrate used) and the method adopted to recover PHAs from cells. Furthermore, a solvent-free method using an enzyme and chemicals in an aqueous medium, was developed in order to recover PHAs from cells. Such a method allowed to recover PHA granules in their amorphous state, i.e. in native form useful for specific applications (e.g. paper coating). In addition, a commercial PHA was used as polymeric matrix to develop biodegradable and bio-based composites for food packaging applications. Biodegradable, non-toxic, food contact plasticizers and low cost, widely available lignocellulosic fibers (wheat straw fibers) were incorporated in such a polymeric matrix, in order to decrease PHA brittleness and the polymer cost, respectively. As concerns the study of polyamide 11, both the rheological and the solid-state behavior of PA11 star samples with different arm number and length was studied. Introduction of arms in a polymer molecule allows to modulate melt viscosity behavior which is advantageous for industrial applications. Also, several important solid-state properties, in particular mechanical properties, are affected by the presence of branching. Given the importance of using ‘green’ synthetic strategies in polymer chemistry, novel poly(-amino esters), synthesized via enzymatic-catalyzed polymerization, have also been investigated in this work.

Safety by design: production of engineering surface modified nanomaterials

This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines. In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered. Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM. Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity. In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance. In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential. Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs.