Considerations on indirect adhesive restorations at the material and tooth interfaces

Objective: Lithium-silicate (LiSi) ceramic is nowadays widely used in dentistry. However, for the longevity of LiSi indirect restorations, it is important to pretreat the material and the dental substrate adequately. However, is not certain how the simplification of the manufacturing and conditioning procedures influences the bonding performances of LiSi ceramic restorations. Accordingly, the aims of this thesis were to investigate the effect of: 1) different LiSi ceramic surface decontamination procedures on the shear bond strength (SBS) to resin composite; 2) different types of lithium-disilicate (LiDi) (pressed vs CAD-CAM) on SBS to resin composite; 3) an experimental metal salt-based zirconium oxynitrate etchant [ZrO(NO3)2] on bonding performances to dentin. Materials and Methods: SBS test was used to investigate the influence of different cleaning protocols applied, or different processing techniques (CAD or PRESS) on the bond strength to composite resin. The third study tackled the interface between restorative materials and dentin, and investigated the microtensile bond strength test (µTBS), nanoleakage expression analysis (NL), gelatin zymography and in situ zymography of dentin conditioned with an experimental metal salt-based zirconium oxynitrate etchant [ZrO(NO3)2]. Results: MEP showed comparable bond strength to the double HP etching and higher compared to other groups. BS of press LiSi to composite was higher than that of CAD/CAM LiSi. ZON pretreatment increased bond strength to dentin when used with a universal adhesive, and inhibited dentinal endogenous enzymes. Conclusions: While simplification of the LiSi conditioning and cleaning procedures seems to yield bond strength comparable to the traditional procedures, it could be recommended in the clinical practice. However, pressed LiSi still seems to perform better in terms of bond strength compared to the CAD/CAM LiSi. Further, the novel ZON etchant seems to perform better compared to the traditional phosphoric dentin etching.

Advances in understanding of osmotic dehydration and vacuum impregnation of fruits

Osmotic Dehydration and Vacuum Impregnation are interesting operations in the food industry with applications in minimal fruit processing and/or freezing, allowing to develop new products with specific innovative characteristics. Osmotic dehydration is widely used for the partial removal of water from cellular tissue by immersion in hypertonic (osmotic) solution. The driving force for the diffusion of water from the tissue is provided by the differences in water chemical potential between the external solution and the internal liquid phase of the cells. Vacuum Impregnation of porous products immersed in a liquid phase consist of reduction of pressure in a solid-liquid system (vacuum step) followed by the restoration of atmospheric pressure (atmospheric step). During the vacuum step the internal gas in the product pores is expanded and partially flows out while during the atmospheric step, there is a compression of residual gas and the external liquid flows into the pores (Fito, 1994). This process is also a very useful unit operation in food engineering as it allows to introduce specific solutes in the tissue which can play different functions (antioxidants, pH regulators, preservatives, cryoprotectants etc.). The present study attempts to enhance our understanding and knowledge of fruit as living organism, interacting dynamically with the environment, and to explore metabolic, structural, physico-chemical changes during fruit processing. The use of innovative approaches and/or technologies such as SAFES (Systematic Approach to Food Engineering System), LF-NMR (Low Frequency Nuclear Magnetic Resonance), GASMAS (Gas in Scattering Media Absorption Spectroscopy) are very promising to deeply study these phenomena. SAFES methodology was applied in order to study irreversibility of the structural changes of kiwifruit during short time of osmotic treatment. The results showed that the deformed tissue can recover its initial state 300 min after osmotic dehydration at 25 °C. The LF-NMR resulted very useful in water status and compartmentalization study, permitting to separate observation of three different water population presented in vacuole, cytoplasm plus extracellular space and cell wall. GASMAS techniques was able to study the pressure equilibration after Vacuum Impregnation showing that after restoration of atmospheric pressure in the solid-liquid system, there was a reminding internal low pressure in the apple tissue that slowly increases until reaching the atmospheric pressure, in a time scale that depends on the vacuum applied during the vacuum step. The physiological response of apple tissue on Vacuum Impregnation process was studied indicating the possibility of vesicular transport within the cells. Finally, the possibility to extend the freezing tolerance of strawberry fruits impregnated with cryoprotectants was proven.

IDeS methodology applied to automotive component re-engineering focused on lightweight and high-strength by additive manufacturing

The project aims to gather an understanding of additive manufacturing and other manufacturing 4.0 techniques with an eyesight for industrialization. First the internal material anisotropy of elements created with the most economically feasible FEM technique was established. An understanding of the main drivers for variability for AM was portrayed, with the focus on achieving material internal isotropy. Subsequently, a technique for deposition parameter optimization was presented, further procedure testing was performed following other polymeric materials and composites. A replicability assessment by means of the use of technology 4.0 was proposed, and subsequent industry findings gathered the ultimate need of developing a process that demonstrate how to re-engineer designs in order to show the best results with AM processing. The latest study aims to apply the Industrial Design and Structure Method (IDES) and applying all the knowledge previously stacked into fully reengineer a product with focus of applying tools from 4.0 era, from product feasibility studies, until CAE – FEM analysis and CAM – DfAM. These results would help in making AM and FDM processes a viable option to be combined with composites technologies to achieve a reliable, cost-effective manufacturing method that could also be used for mass market, industry applications.

L'a(rche)tipico Brian O'Nolan. Comico e riso dalla tradizione al post-

This study aims at analysing Brian O'Nolans literary production in the light of a reconsideration of the role played by his two most famous pseudonyms ,Flann Brien and Myles na Gopaleen, behind which he was active both as a novelist and as a journalist. We tried to establish a new kind of relationship between them and their empirical author following recent cultural and scientific surveys in the field of Humour Studies, Psychology, and Sociology: taking as a starting point the appreciation of the comic attitude in nature and in cultural history, we progressed through a short history of laughter and derision, followed by an overview on humour theories. After having established such a frame, we considered an integration of scientific studies in the field of laughter and humour as a base for our study scheme, in order to come to a definition of the comic author as a recognised, powerful and authoritative social figure who acts as a critic of conventions. The history of laughter and comic we briefly summarized, based on the one related by the French scholar Georges Minois in his work (Minois 2004), has been taken into account in the view that humorous attitude is one of man’s characteristic traits always present and witnessed throughout the ages, though subject in most cases to repression by cultural and political conservative power. This sort of Super-Ego notwithstanding, or perhaps because of that, comic impulse proved irreducible exactly in its influence on the current cultural debates. Basing mainly on Robert R. Provine’s (Provine 2001), Fabio Ceccarelli’s (Ceccarelli 1988), Arthur Koestler’s (Koestler 1975) and Peter L. Berger’s (Berger 1995) scientific essays on the actual occurrence of laughter and smile in complex social situations, we underlined the many evidences for how the use of comic, humour and wit (in a Freudian sense) could be best comprehended if seen as a common mind process designed for the improvement of knowledge, in which we traced a strict relation with the play-element the Dutch historian Huizinga highlighted in his famous essay, Homo Ludens (Huizinga 1955). We considered comic and humour/wit as different sides of the same coin, and showed how the demonstrations scientists provided on this particular subject are not conclusive, given that the mental processes could not still be irrefutably shown to be separated as regards graduations in comic expression and reception: in fact, different outputs in expressions might lead back to one and the same production process, following the general ‘Economy Rule’ of evolution; man is the only animal who lies, meaning with this that one feeling is not necessarily biuniquely associated with one and the same outward display, so human expressions are not validation proofs for feelings. Considering societies, we found that in nature they are all organized in more or less the same way, that is, in élites who govern over a community who, in turn, recognizes them as legitimate delegates for that task; we inferred from this the epistemological possibility for the existence of an added ruling figure alongside those political and religious: this figure being the comic, who is the person in charge of expressing true feelings towards given subjects of contention. Any community owns one, and his very peculiar status is validated by the fact that his place is within the community, living in it and speaking to it, but at the same time is outside it in the sense that his action focuses mainly on shedding light on ideas and objects placed out-side the boundaries of social convention: taboos, fears, sacred objects and finally culture are the favourite targets of the comic person’s arrow. This is the reason for the word a(rche)typical as applied to the comic figure in society: atypical in a sense, because unconventional and disrespectful of traditions, critical and never at ease with unblinkered respect of canons; archetypical, because the “village fool”, buffoon, jester or anyone in any kind of society who plays such roles, is an archetype in the Jungian sense, i.e. a personification of an irreducible side of human nature that everybody instinctively knows: a beginner of a tradition, the perfect type, what is most conventional of all and therefore the exact opposite of an atypical. There is an intrinsic necessity, we think, of such figures in societies, just like politicians and priests, who should play an elitist role in order to guide and rule not for their own benefit but for the good of the community. We are not naïve and do know that actual owners of power always tend to keep it indefinitely: the ‘social comic’ as a role of power has nonetheless the distinctive feature of being the only job whose tension is not towards stability. It has got in itself the rewarding permission of contradiction, for the very reason we exposed before that the comic must cast an eye both inside and outside society and his vision may be perforce not consistent, then it is satisfactory for the popularity that gives amongst readers and audience. Finally, the difference between governors, priests and comic figures is the seriousness of the first two (fundamentally monologic) and the merry contradiction of the third (essentially dialogic). MPs, mayors, bishops and pastors should always console, comfort and soothe popular mood in respect of the public convention; the comic has the opposite task of provoking, urging and irritating, accomplishing at the same time a sort of control of the soothing powers of society, keepers of the righteousness. In this view, the comic person assumes a paramount importance in the counterbalancing of power administration, whether in form of acting in public places or in written pieces which could circulate for private reading. At this point comes into question our Irish writer Brian O'Nolan(1911-1966), real name that stood behind the more famous masks of Flann O'Brien, novelist, author of At Swim-Two-Birds (1939), The Hard Life (1961), The Dalkey Archive (1964) and, posthumously, The Third Policeman (1967); and of Myles na Gopaleen, journalist, keeper for more than 25 years of the Cruiskeen Lawn column on The Irish Times (1940-1966), and author of the famous book-parody in Irish An Béal Bocht (1941), later translated in English as The Poor Mouth (1973). Brian O'Nolan, professional senior civil servant of the Republic, has never seen recognized his authorship in literary studies, since all of them concentrated on his alter egos Flann, Myles and some others he used for minor contributions. So far as we are concerned, we think this is the first study which places the real name in the title, this way acknowledging him an unity of intents that no-one before did. And this choice in titling is not a mere mark of distinction for the sake of it, but also a wilful sign of how his opus should now be reconsidered. In effect, the aim of this study is exactly that of demonstrating how the empirical author Brian O'Nolan was the real Deus in machina, the master of puppets who skilfully directed all of his identities in planned directions, so as to completely fulfil the role of the comic figure we explained before. Flann O'Brien and Myles na Gopaleen were personae and not persons, but the impression one gets from the critical studies on them is the exact opposite. Literary consideration, that came only after O'Nolans death, began with Anne Clissmann’s work, Flann O'Brien: A Critical Introduction to His Writings (Clissmann 1975), while the most recent book is Keith Donohue’s The Irish Anatomist: A Study of Flann O'Brien (Donohue 2002); passing through M.Keith Booker’s Flann O'Brien, Bakhtin and Menippean Satire (Booker 1995), Keith Hopper’s Flann O'Brien: A Portrait of the Artist as a Young Post-Modernist (Hopper 1995) and Monique Gallagher’s Flann O'Brien, Myles et les autres (Gallagher 1998). There have also been a couple of biographies, which incidentally somehow try to explain critical points his literary production, while many critical studies do the same on the opposite side, trying to found critical points of view on the author’s restless life and habits. At this stage, we attempted to merge into O'Nolan's corpus the journalistic articles he wrote, more than 4,200, for roughly two million words in the 26-year-old running of the column. To justify this, we appealed to several considerations about the figure O'Nolan used as writer: Myles na Gopaleen (later simplified in na Gopaleen), who was the equivalent of the street artist or storyteller, speaking to his imaginary public and trying to involve it in his stories, quarrels and debates of all kinds. First of all, he relied much on language for the reactions he would obtain, playing on, and with, words so as to ironically unmask untrue relationships between words and things. Secondly, he pushed to the limit the convention of addressing to spectators and listeners usually employed in live performing, stretching its role in the written discourse to come to a greater effect of involvement of readers. Lastly, he profited much from what we labelled his “specific weight”, i.e. the potential influence in society given by his recognised authority in determined matters, a position from which he could launch deeper attacks on conventional beliefs, so complying with the duty of a comic we hypothesised before: that of criticising society even in threat of losing the benefits the post guarantees. That seemingly masochistic tendency has its rationale. Every representative has many privileges on the assumption that he, or she, has great responsibilities in administrating. The higher those responsibilities are, the higher is the reward but also the severer is the punishment for the misfits done while in charge. But we all know that not everybody accepts the rules and many try to use their power for their personal benefit and do not want to undergo law’s penalties. The comic, showing in this case more civic sense than others, helped very much in this by the non-accessibility to the use of public force, finds in the role of the scapegoat the right accomplishment of his task, accepting the punishment when his breaking of the conventions is too stark to be forgiven. As Ceccarelli demonstrated, the role of the object of laughter (comic, ridicule) has its very own positive side: there is freedom of expression for the person, and at the same time integration in the society, even though at low levels. Then the banishment of a ‘social’ comic can never get to total extirpation from society, revealing how the scope of the comic lies on an entirely fictional layer, bearing no relation with facts, nor real consequences in terms of physical health. Myles na Gopaleen, mastering these three characteristics we postulated in the highest way, can be considered an author worth noting; and the oeuvre he wrote, the whole collection of Cruiskeen Lawn articles, is rightfully a novel because respects the canons of it especially regarding the authorial figure and his relationship with the readers. In addition, his work can be studied even if we cannot conduct our research on the whole of it, this proceeding being justified exactly because of the resemblances to the real figure of the storyteller: its ‘chapters’ —the daily articles— had a format that even the distracted reader could follow, even one who did not read each and every article before. So we can critically consider also a good part of them, as collected in the seven volumes published so far, with the addition of some others outside the collections, because completeness in this case is not at all a guarantee of a better precision in the assessment; on the contrary: examination of the totality of articles might let us consider him as a person and not a persona. Once cleared these points, we proceeded further in considering tout court the works of Brian O'Nolan as the works of a unique author, rather than complicating the references with many names which are none other than well-wrought sides of the same personality. By putting O'Nolan as the correct object of our research, empirical author of the works of the personae Flann O'Brien and Myles na Gopaleen, there comes out a clearer literary landscape: the comic author Brian O'Nolan, self-conscious of his paramount role in society as both a guide and a scourge, in a word as an a(rche)typical, intentionally chose to differentiate his personalities so as to create different perspectives in different fields of knowledge by using, in addition, different means of communication: novels and journalism. We finally compared the newly assessed author Brian O'Nolan with other great Irish comic writers in English, such as James Joyce (the one everybody named as the master in the field), Samuel Beckett, and Jonathan Swift. This comparison showed once more how O'Nolan is in no way inferior to these authors who, greatly celebrated by critics, have nonetheless failed to achieve that great public recognition O’Nolan received alias Myles, awarded by the daily audience he reached and influenced with his Cruiskeen Lawn column. For this reason, we believe him to be representative of the comic figure’s function as a social regulator and as a builder of solidarity, such as that Raymond Williams spoke of in his work (Williams 1982), with in mind the aim of building a ‘culture in common’. There is no way for a ‘culture in common’ to be acquired if we do not accept the fact that even the most functional society rests on conventions, and in a world more and more ‘connected’ we need someone to help everybody negotiate with different cultures and persons. The comic gives us a worldly perspective which is at the same time comfortable and distressing but in the end not harmful as the one furnished by politicians could be: he lets us peep into parallel worlds without moving too far from our armchair and, as a consequence, is the one who does his best for the improvement of our understanding of things.

Statistical methods for biomedical signal analysis and processing

Statistical modelling and statistical learning theory are two powerful analytical frameworks for analyzing signals and developing efficient processing and classification algorithms. In this thesis, these frameworks are applied for modelling and processing biomedical signals in two different contexts: ultrasound medical imaging systems and primate neural activity analysis and modelling. In the context of ultrasound medical imaging, two main applications are explored: deconvolution of signals measured from a ultrasonic transducer and automatic image segmentation and classification of prostate ultrasound scans. In the former application a stochastic model of the radio frequency signal measured from a ultrasonic transducer is derived. This model is then employed for developing in a statistical framework a regularized deconvolution procedure, for enhancing signal resolution. In the latter application, different statistical models are used to characterize images of prostate tissues, extracting different features. These features are then uses to segment the images in region of interests by means of an automatic procedure based on a statistical model of the extracted features. Finally, machine learning techniques are used for automatic classification of the different region of interests. In the context of neural activity signals, an example of bio-inspired dynamical network was developed to help in studies of motor-related processes in the brain of primate monkeys. The presented model aims to mimic the abstract functionality of a cell population in 7a parietal region of primate monkeys, during the execution of learned behavioural tasks.

The assessment of change in rural landscape and the analysis of the driving forces. Proposal of a spatial model for the rural built environment

The presented study carried out an analysis on rural landscape changes. In particular the study focuses on the understanding of driving forces acting on the rural built environment using a statistical spatial model implemented through GIS techniques. It is well known that the study of landscape changes is essential for a conscious decision making in land planning. From a bibliography review results a general lack of studies dealing with the modeling of rural built environment and hence a theoretical modelling approach for such purpose is needed. The advancement in technology and modernity in building construction and agriculture have gradually changed the rural built environment. In addition, the phenomenon of urbanization of a determined the construction of new volumes that occurred beside abandoned or derelict rural buildings. Consequently there are two types of transformation dynamics affecting mainly the rural built environment that can be observed: the conversion of rural buildings and the increasing of building numbers. It is the specific aim of the presented study to propose a methodology for the development of a spatial model that allows the identification of driving forces that acted on the behaviours of the building allocation. In fact one of the most concerning dynamic nowadays is related to an irrational expansion of buildings sprawl across landscape. The proposed methodology is composed by some conceptual steps that cover different aspects related to the development of a spatial model: the selection of a response variable that better describe the phenomenon under study, the identification of possible driving forces, the sampling methodology concerning the collection of data, the most suitable algorithm to be adopted in relation to statistical theory and method used, the calibration process and evaluation of the model. A different combination of factors in various parts of the territory generated favourable or less favourable conditions for the building allocation and the existence of buildings represents the evidence of such optimum. Conversely the absence of buildings expresses a combination of agents which is not suitable for building allocation. Presence or absence of buildings can be adopted as indicators of such driving conditions, since they represent the expression of the action of driving forces in the land suitability sorting process. The existence of correlation between site selection and hypothetical driving forces, evaluated by means of modeling techniques, provides an evidence of which driving forces are involved in the allocation dynamic and an insight on their level of influence into the process. GIS software by means of spatial analysis tools allows to associate the concept of presence and absence with point futures generating a point process. Presence or absence of buildings at some site locations represent the expression of these driving factors interaction. In case of presences, points represent locations of real existing buildings, conversely absences represent locations were buildings are not existent and so they are generated by a stochastic mechanism. Possible driving forces are selected and the existence of a causal relationship with building allocations is assessed through a spatial model. The adoption of empirical statistical models provides a mechanism for the explanatory variable analysis and for the identification of key driving variables behind the site selection process for new building allocation. The model developed by following the methodology is applied to a case study to test the validity of the methodology. In particular the study area for the testing of the methodology is represented by the New District of Imola characterized by a prevailing agricultural production vocation and were transformation dynamic intensively occurred. The development of the model involved the identification of predictive variables (related to geomorphologic, socio-economic, structural and infrastructural systems of landscape) capable of representing the driving forces responsible for landscape changes.. The calibration of the model is carried out referring to spatial data regarding the periurban and rural area of the study area within the 1975-2005 time period by means of Generalised linear model. The resulting output from the model fit is continuous grid surface where cells assume values ranged from 0 to 1 of probability of building occurrences along the rural and periurban area of the study area. Hence the response variable assesses the changes in the rural built environment occurred in such time interval and is correlated to the selected explanatory variables by means of a generalized linear model using logistic regression. Comparing the probability map obtained from the model to the actual rural building distribution in 2005, the interpretation capability of the model can be evaluated. The proposed model can be also applied to the interpretation of trends which occurred in other study areas, and also referring to different time intervals, depending on the availability of data. The use of suitable data in terms of time, information, and spatial resolution and the costs related to data acquisition, pre-processing, and survey are among the most critical aspects of model implementation. Future in-depth studies can focus on using the proposed model to predict short/medium-range future scenarios for the rural built environment distribution in the study area. In order to predict future scenarios it is necessary to assume that the driving forces do not change and that their levels of influence within the model are not far from those assessed for the time interval used for the calibration.

Development discourse in Romania: from Socialism to EU Membership

With their accession to the European Union, twelve new countries - Romania among them - (re)entered the international community of international donors. In the history of development aid this can be seen as a unique event: it is for the first time in history that such a large number of countries become international donors, with such short notice and in such a particular context that sees some scholars announcing the ‘death’ of development. But in spite of what might be claimed regarding the ‘end’ of the development era, development discourse seems to be rather vigorous and in good health: it is able to extert an undeniable force of attraction over the twelve countries that, in a matter of years, have already convinced themselves of its validity and adhered to its main tenets. This thesis collects evidence for improving our understanding of this process that sees the co-optation of twelve new countries to the dominant theory and practice of development cooperation. The evidence collected seems to show that one of the tools employed by the promoters of this co-optation process is that of constructing the ‘new’ Member States as ‘new’, inexpert donors that need to learn from the ‘old’ ones. By taking a case-study approach, this thesis gathers data that suggests that conceiving of the ‘twelve’ as ‘new’ donors is both historically inaccurate and value-ladden. On one hand, Romania’s case-study illustrates how in the (socialist) past at least one in the group of the twelve was particularly conversant in the discourse of international development. On the other hand, the process of co-optation, while being presented as a knowledgeproducing process, can also be seen as an ignorance-producing procedure: Romania, along with its fellow new Member States, takes the opportunity of ‘building its capacity’ and ‘raising its awareness’ of development cooperation along the line drawn by the European Union, but at the same time it seems to un-learn and ‘lower’ its awareness of development experience in the (socialist) past. This is one possible reading of this thesis. At a different level, this thesis can also be seen as an attempt to account of almost five decades of international development discourse in one specific country – Romania – in three different socio-political contexts: the socialist years (up to the year 1989), the ‘transition years’ (from 1989 to the pre-accession years) and the membership to the European Union. In this second reading, the thesis seeks to illustrate how – contrary to widespread beliefs – before 1989 Romania’s international development discourse was particularly vivid: in the most varied national and international settings President Ceausescu unfolded an extensive discursive activity on issues pertaining to international development; generous media coverage of affairs concerning the developing countries and their fight for development was the rule rather than the exception; the political leadership wanted the Romanians not only to be familiarized with (or ‘aware of’ to use current terminology) matters of underdevelopment, but also to prove a sense of solidarity with these countries, as well as a sense of pride for the relations of ‘mutual help’ that were being built with them; finally, international development was object of academic attention and the Romanian scholars were able not only to reflect on major developments, but could also formulate critical positions towards the practices of development aid. Very little remains of all this during the transition years, while in the present those who are engaged in matters pertaining to international development do so with a view of building Romania as an EU-compliant donor.

Il concetto di sezione nel metodo compositivo di Aldo Rossi.

Purpose of this research is to deepen the study on the section in architecture. The survey aims as important elements in the project Teatro Domestico by Aldo Rossi built for the XVII Triennale di Milano in 1986 and, through the implementation on several topics of architecture, verify the timeliness and fertility in the new compositional exercises. Through the study of certain areas of the Rossi’s theory we tried to find a common thread for the reading of the theater project. The theater is the place of the ephemeral and the artificial, which is why his destiny is the end and the fatal loss. The design and construction of theater setting has always had a double meaning between the value of civil architecture and testing of new technologies available. Rossi's experience in this area are clear examples of the inseparable relationship between the representation of architecture as art and design of architecture as a model of reality. In the Teatro Domestico, the distinction between representation and the real world is constantly canceled and returned through the reversal of the meaning and through the skip of scale. At present, studies conducted on the work of Rossi concern the report that the architectural composition is the theory of form, focusing compositional development of a manufacturing process between the typological analysis and form invention. The research, through the analysis of some projects few designs, will try to analyze this issue through the rules of composition both graphical and concrete construction, hoping to decipher the mechanism underlying the invention. The almost total lack of published material on the project Teatro Domestico and the opportunity to visit the archives that preserve the drawings, has allowed the author of this study to deepen the internal issues in the project, thus placing this search as a first step toward possible further analysis on the works of Rossi linked to performance world. The final aim is therefore to produce material that can best describe the work of Rossi. Through the reading of the material published by the same author and the vision of unpublished material preserved in the archives, it was possible to develop new material and increasing knowledge about the work, otherwise difficult to analyze. The research is divided into two groups. The first, taking into account the close relationship most frequently mentioned by Rossi himself between archeology and architectural composition, stresses the importance of tipo such as urban composition reading system as well as open tool of invention. Resuming Ezio Bonfanti’s essay on the work of the architect we wanted to investigate how the paratactic method is applied to the early work conceived and, subsequently as the process reaches a complexity accentuated, while keeping stable the basic terms. Following a brief introduction related to the concept of the section and the different interpretations that over time the term had, we tried to identify with this facility a methodology for reading Rossi’s projects. The result is a constant typological interpretation of the term, not only related to the composition in plant but also through the elevation plans. The section is therefore intended as the overturning of such elevation is marked on the same plane of the terms used, there is a different approach, but a similarity of characters. The identification of architectural phonemes allows comparison with other arts. The research goes in the direction of language trying to identify the relationship between representation and construction, between the ephemeral and the real world. In this sense it will highlight the similarities between the graphic material produced by Ross and some important examples of contemporary author. The comparison between the composition system with the surrealist world of painting and literature will facilitate the understanding and identification of possible rules applied by Rossi. The second part of the research is characterized by a focus on the intent of the project chosen. Teatro Domestico embodies a number of elements that seem to conclude (assuming an end point but also to start) a curriculum author. With it, the experiments carried out on the theater started with the project for the Teatrino Scientifico (1978) through the project for the Teatro del Mondo (1979), into a Laic Tabernacle representative collective and private memory of the city. Starting from a reading of the draft, through the collection of published material, we’ve made an analysis on the explicit themes of the work, finding the conceptual references. Following the taking view of the original materials not published kept at Aldo Rossi's Archive Collection of the Canadian Center for Architecture in Montréal, will be implemented through the existing techniques for digital representation, a virtual reconstruction of the project, adding little to the material, a new element for future studies. The reconstruction is part of a larger research studies where the current technologies of composition and representation in architecture stand side by side with research on the method of composition of this architect. The results achieved are in addition to experiences in the past dealt with the reconstruction of some of the lost works of Aldo Rossi. A partial objective is to reactivate a discourse around this work is considered non-principal, among others born in the prolific activities. Reassessment of development projects which would bring the level of ephemeral works most frequented by giving them the value earned. In conclusion, the research aims to open a new field of interest on the part not only as a technical instrument of representation of an idea but as an actual mechanism through which composition is formed and the idea is developed.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Foetal heart rate recording: analysis and comparison of different methodologies

Monitoring foetal health is a very important task in clinical practice to appropriately plan pregnancy management and delivery. In the third trimester of pregnancy, ultrasound cardiotocography is the most employed diagnostic technique: foetal heart rate and uterine contractions signals are simultaneously recorded and analysed in order to ascertain foetal health. Because ultrasound cardiotocography interpretation still lacks of complete reliability, new parameters and methods of interpretation, or alternative methodologies, are necessary to further support physicians’ decisions. To this aim, in this thesis, foetal phonocardiography and electrocardiography are considered as different techniques. Further, variability of foetal heart rate is thoroughly studied. Frequency components and their modifications can be analysed by applying a time-frequency approach, for a distinct understanding of the spectral components and their change over time related to foetal reactions to internal and external stimuli (such as uterine contractions). Such modifications of the power spectrum can be a sign of autonomic nervous system reactions and therefore represent additional, objective information about foetal reactivity and health. However, some limits of ultrasonic cardiotocography still remain, such as in long-term foetal surveillance, which is often recommendable mainly in risky pregnancies. In these cases, the fully non-invasive acoustic recording, foetal phonocardiography, through maternal abdomen, represents a valuable alternative to the ultrasonic cardiotocography. Unfortunately, the so recorded foetal heart sound signal is heavily loaded by noise, thus the determination of the foetal heart rate raises serious signal processing issues. A new algorithm for foetal heart rate estimation from foetal phonocardiographic recordings is presented in this thesis. Different filtering and enhancement techniques, to enhance the first foetal heart sounds, were applied, so that different signal processing techniques were implemented, evaluated and compared, by identifying the strategy characterized on average by the best results. In particular, phonocardiographic signals were recorded simultaneously to ultrasonic cardiotocographic signals in order to compare the two foetal heart rate series (the one estimated by the developed algorithm and the other provided by cardiotocographic device). The algorithm performances were tested on phonocardiographic signals recorded on pregnant women, showing reliable foetal heart rate signals, very close to the ultrasound cardiotocographic recordings, considered as reference. The algorithm was also tested by using a foetal phonocardiographic recording simulator developed and presented in this research thesis. The target was to provide a software for simulating recordings relative to different foetal conditions and recordings situations and to use it as a test tool for comparing and assessing different foetal heart rate extraction algorithms. Since there are few studies about foetal heart sounds time characteristics and frequency content and the available literature is poor and not rigorous in this area, a data collection pilot study was also conducted with the purpose of specifically characterising both foetal and maternal heart sounds. Finally, in this thesis, the use of foetal phonocardiographic and electrocardiographic methodology and their combination, are presented in order to detect foetal heart rate and other functioning anomalies. The developed methodologies, suitable for longer-term assessment, were able to detect heart beat events correctly, such as first and second heart sounds and QRS waves. The detection of such events provides reliable measures of foetal heart rate, potentially information about measurement of the systolic time intervals and foetus circulatory impedance.

Analysis of human body kinematics using a hybrid markerless video acquisition and processing

A main objective of the human movement analysis is the quantitative description of joint kinematics and kinetics. This information may have great possibility to address clinical problems both in orthopaedics and motor rehabilitation. Previous studies have shown that the assessment of kinematics and kinetics from stereophotogrammetric data necessitates a setup phase, special equipment and expertise to operate. Besides, this procedure may cause feeling of uneasiness on the subjects and may hinder with their walking. The general aim of this thesis is the implementation and evaluation of new 2D markerless techniques, in order to contribute to the development of an alternative technique to the traditional stereophotogrammetric techniques. At first, the focus of the study has been the estimation of the ankle-foot complex kinematics during stance phase of the gait. Two particular cases were considered: subjects barefoot and subjects wearing ankle socks. The use of socks was investigated in view of the development of the hybrid method proposed in this work. Different algorithms were analyzed, evaluated and implemented in order to have a 2D markerless solution to estimate the kinematics for both cases. The validation of the proposed technique was done with a traditional stereophotogrammetric system. The implementation of the technique leads towards an easy to configure (and more comfortable for the subject) alternative to the traditional stereophotogrammetric system. Then, the abovementioned technique has been improved so that the measurement of knee flexion/extension could be done with a 2D markerless technique. The main changes on the implementation were on occlusion handling and background segmentation. With the additional constraints, the proposed technique was applied to the estimation of knee flexion/extension and compared with a traditional stereophotogrammetric system. Results showed that the knee flexion/extension estimation from traditional stereophotogrammetric system and the proposed markerless system were highly comparable, making the latter a potential alternative for clinical use. A contribution has also been given in the estimation of lower limb kinematics of the children with cerebral palsy (CP). For this purpose, a hybrid technique, which uses high-cut underwear and ankle socks as “segmental markers” in combination with a markerless methodology, was proposed. The proposed hybrid technique is different than the abovementioned markerless technique in terms of the algorithm chosen. Results showed that the proposed hybrid technique can become a simple and low-cost alternative to the traditional stereophotogrammetric systems.

Understanding The Physiological, Biochemical, and Molecular Mechanisms of Salinity Tolerance in Strawberry Cultivars and in HvTPK1-Overexpressed Barley

The research was carried out to investigate of main elements of salt stress response in two strawberry cultivars, Elsanta and Elsinore. Plants were grown under 0, 10, 20 and 40 mM NaCl for 80 days. Salinity dramatically affected growth in both cultivars, although Elsinore appeared to be more impaired than Elsanta. Moreover a significant reduction of leaf photosynthesis, evaporation, and stomatal conductance was recorded 24 hrs after the stress was applied in both cultivars, whereas physiological functions were differentially restored after acclimation. However, cv. Elsanta had more efficient leaf gas exchange and water status than cv. Elsinore. In general, Fruit yield reduced upon salinization, wheares fruit quality concerning fruit taste, aroma, appearance, total soluble solids and titratable acidity, did not change but rather was enhanced under moderate salinity. On the other hand fruit quality was impaired at severe salt stress. Fruit antioxidant content and antioxidant capacity were enhanced significantly by increasing salt concentration in both cultivars. The oxidative effects of the stress were defined by the measures of some enzymatic activities and lipid peroxidation. Consistently, an increase in superoxide dismutase (SOD), catalase (CAT), peroxide dismutase (POD) enzymes and higher content of proline and soluble proteins were observed in cv. Elsinore than in cv. Elsanta. The increase coincided with a decrease in lipid peroxidation. The research confirmed that although strawberry cultivars were sensitive to salinity, difference between cultivars exist; The experiment revealed that cv. Elsanta could stand severe salt stress, which was lethal to cv. Elsinore. The parameters measured in the previous experiment were proposed as early screening tools for the salt stress response in nine strawberry genotypes. The results showed that, wheares Elsanta and Elsinore cultivars had a lower dry weight reduction at 40 mM NaCl among cultivars, Naiad, Kamila, and Camarosa were the least salt-sensitive cultivars among the screened.

Linguistica Cognitiva e analisi retorica: indicazioni per un percorso sulla metafora nella didattica della lingua.

La tesi sviluppa le proposte teoriche della Linguistica Cognitiva a proposito della metafora e propone una loro possibile applicazione in ambito didattico. La linguistica cognitiva costituisce la cornice interpretativa della ricerca, a partire dai suoi concetti principali: la prospettiva integrata, l’embodiment, la centralità della semantica, l’attenzione per la psicolinguistica e le neuroscienze. All’interno di questo panorama, prende vigore un’idea di metafora come punto d’incontro tra lingua e pensiero, come criterio organizzatore delle conoscenze, strumento conoscitivo fondamentale nei processi di apprendimento. A livello didattico, la metafora si rivela imprescindibile sia come strumento operativo che come oggetto di riflessione. L’approccio cognitivista può fornire utili indicazioni su come impostare un percorso didattico sulla metafora. Nel presente lavoro, si indaga in particolare l’uso didattico di stimoli non verbali nel rafforzamento delle competenze metaforiche di studenti di scuola media. Si è scelto come materiale di partenza la pubblicità, per due motivi: il diffuso impiego di strategie retoriche in ambito pubblicitario e la specificità comunicativa del genere, che permette una chiara disambiguazione di fenomeni che, in altri contesti, non potrebbero essere analizzati con la stessa univocità. Si presenta dunque un laboratorio finalizzato al miglioramento della competenza metaforica degli studenti che si avvale di due strategie complementari: da una parte, una spiegazione ispirata ai modelli cognitivisti, sia nella terminologia impiegata che nella modalità di analisi (di tipo usage-based); dall’altra un training con metafore visive in pubblicità, che comprende una fase di analisi e una fase di produzione. È stato usato un test, suddiviso in compiti specifici, per oggettivare il più possibile i progressi degli studenti alla fine del training, ma anche per rilevare le difficoltà e i punti di forza nell’analisi rispetto sia ai contesti d’uso (letterario e convenzionale) sia alle forme linguistiche assunte dalla metafora (nominale, verbale, aggettivale).

Physiological and structural aspects of fruit and vegetable mild processing

Over the past years fruit and vegetable industry has become interested in the application of both osmotic dehydration and vacuum impregnation as mild technologies because of their low temperature and energy requirements. Osmotic dehydration is a partial dewatering process by immersion of cellular tissue in hypertonic solution. The diffusion of water from the vegetable tissue to the solution is usually accompanied by the simultaneous solutes counter-diffusion into the tissue. Vacuum impregnation is a unit operation in which porous products are immersed in a solution and subjected to a two-steps pressure change. The first step (vacuum increase) consists of the reduction of the pressure in a solid-liquid system and the gas in the product pores is expanded, partially flowing out. When the atmospheric pressure is restored (second step), the residual gas in the pores compresses and the external liquid flows into the pores. This unit operation allows introducing specific solutes in the tissue, e.g. antioxidants, pH regulators, preservatives, cryoprotectancts. Fruit and vegetable interact dynamically with the environment and the present study attempts to enhance our understanding on the structural, physico-chemical and metabolic changes of plant tissues upon the application of technological processes (osmotic dehydration and vacuum impregnation), by following a multianalytical approach. Macro (low-frequency nuclear magnetic resonance), micro (light microscopy) and ultrastructural (transmission electron microscopy) measurements combined with textural and differential scanning calorimetry analysis allowed evaluating the effects of individual osmotic dehydration or vacuum impregnation processes on (i) the interaction between air and liquid in real plant tissues, (ii) the plant tissue water state and (iii) the cell compartments. Isothermal calorimetry, respiration and photosynthesis determinations led to investigate the metabolic changes upon the application of osmotic dehydration or vacuum impregnation. The proposed multianalytical approach should enable both better designs of processing technologies and estimations of their effects on tissue.

Comparing genetic and linguistic diversity in African populations with a focus on the Khoisan of southern Africa

The interaction between disciplines in the study of human population history is of primary importance, profiting from the biological and cultural characteristics of humankind. In fact, data from genetics, linguistics, archaeology and cultural anthropology can be combined to allow for a broader research perspective. This multidisciplinary approach is here applied to the study of the prehistory of sub-Saharan African populations: in this continent, where Homo sapiens originally started his evolution and diversification, the understanding of the patterns of human variation has a crucial relevance. For this dissertation, molecular data is interpreted and complemented with a major contribution from linguistics: linguistic data are compared to the genetic data and the research questions are contextualized within a linguistic perspective. In the four articles proposed, we analyze Y chromosome SNPs and STRs profiles and full mtDNA genomes on a representative number of samples to investigate key questions of African human variability. Some of these questions address i) the amount of genetic variation on a continental scale and the effects of the widespread migration of Bantu speakers, ii) the extent of ancient population structure, which has been lost in present day populations, iii) the colonization of the southern edge of the continent together with the degree of population contact/replacement, and iv) the prehistory of the diverse Khoisan ethnolinguistic groups, who were traditionally understudied despite representing one of the most ancient divergences of modern human phylogeny. Our results uncover a deep level of genetic structure within the continent and a multilayered pattern of contact between populations. These case studies represent a valuable contribution to the debate on our prehistory and open up further research threads.