Design and Characterization of New Luminescent Sensors and Labels

The aim of this Ph.D. project has been the design and characterization of new and more efficient luminescent tools, in particular sensors and labels, for analytical chemistry, medical diagnostics and imaging. Actually both the increasing temporal and spatial resolutions that are demanded by those branches, coupled to a sensitivity that is required to reach the single molecule resolution, can be provided by the wide range of techniques based on luminescence spectroscopy. As far as the development of new chemical sensors is concerned, as chemists we were interested in the preparation of new, efficient, sensing materials. In this context, we kept developing new molecular chemosensors, by exploiting the supramolecular approach, for different classes of analytes. In particular we studied a family of luminescent tetrapodal-hosts based on aminopyridinium units with pyrenyl groups for the detection of anions. These systems exhibited noticeable changes in the photophysical properties, depending on the nature of the anion; in particular, addition of chloride resulted in a conformational change, giving an initial increase in excimeric emission. A good selectivity for dicarboxylic acid was also found. In the search for higher sensitivities, we moved our attention also to systems able to perform amplification effects. In this context we described the metal ion binding properties of three photoactive poly-(arylene ethynylene) co-polymers with different complexing units and we highlighted, for one of them, a ten-fold amplification of the response in case of addition of Zn2+, Cu2+ and Hg2+ ions. In addition, we were able to demonstrate the formation of complexes with Yb3+ an Er3+ and an efficient sensitization of their typical metal centered NIR emission upon excitation of the polymer structure, this feature being of particular interest for their possible applications in optical imaging and in optical amplification for telecommunication purposes. An amplification effect was also observed during this research in silica nanoparticles derivatized with a suitable zinc probe. In this case we were able to prove, for the first time, that nanoparticles can work as “off-on” chemosensors with signal amplification. Fluorescent silica nanoparticles can be thus seen as innovative multicomponent systems in which the organization of photophysically active units gives rise to fruitful collective effects. These precious effects can be exploited for biological imaging, medical diagnostic and therapeutics, as evidenced also by some results reported in this thesis. In particular, the observed amplification effect has been obtained thanks to a suitable organization of molecular probe units onto the surface of the nanoparticles. In the effort of reaching a deeper inside in the mechanisms which lead to the final amplification effects, we also attempted to find a correlation between the synthetic route and the final organization of the active molecules in the silica network, and thus with those mutual interactions between one another which result in the emerging, collective behavior, responsible for the desired signal amplification. In this context, we firstly investigated the process of formation of silica nanoparticles doped with pyrene derivative and we showed that the dyes are not uniformly dispersed inside the silica matrix; thus, core-shell structures can be formed spontaneously in a one step synthesis. Moreover, as far as the design of new labels is concerned, we reported a new synthetic approach to obtain a class of robust, biocompatible silica core-shell nanoparticles able to show a long-term stability. Taking advantage of this new approach we also showed the synthesis and photophysical properties of core-shell NIR absorbing and emitting materials that proved to be very valuable for in-vivo imaging. In general, the dye doped silica nanoparticles prepared in the framework of this project can conjugate unique properties, such as a very high brightness, due to the possibility to include many fluorophores per nanoparticle, high stability, because of the shielding effect of the silica matrix, and, to date, no toxicity, with a simple and low-cost preparation. All these features make these nanostructures suitable to reach the low detection limits that are nowadays required for effective clinical and environmental applications, fulfilling in this way the initial expectations of this research project.

Harmful algae and their potential impacts on the coastal ecosystem: growth and toxin production dynamics

The main goal of the present thesis was to study some harmful algal species which cause blooms in Italian coastal waters, leading to consequences for human health, coastal ecosystem, fishery and tourism. In particular, in the first part of this thesis the toxicity of Adriatic strains of the raphidophyte Fibrocapsa japonica was investigated. Despite several hypotheses have been proposed for the toxic mechanism of the raphidophytes, especially for the species Chattonella antiqua and C. marina, which have been studied more extensively, just a few studies on the toxic effects of these species for different organisms were reported. Moreover, a careful reading of the literature evidenced as any ichthyotoxic events reported worldwide can be linked to F. japonica blooms. Although recently several studies were performed on F. japonica strains from the USA, Japan, Australia, New Zealand, the Netherlands, Germany, and France in order to characterize their growth and toxicity features, the work reported in this thesis results one of the first investigation on the toxic effects of F. japonica for different organisms, such as bacteria, crustaceans and fish. Mortality effects, together with haemolysis of fish erythrocytes, probably due to the relatively high amount of PUFAs produced by this species, were observed. Mortality for fish, however, was reported only at a high cell density and after a long exposition period (9-10 days); moreover a significant increase of H2O2 obtained in the tanks where sea basses were exposed to F. japonica was also relevant. This result may justify the absence of ichthyotoxic events in the Italian coasts, despite F. japonica blooms detected in these areas were characterized by high cell densities. This work reports also a first complete characterization of the fatty acids produced and extracellularly released by the Adriatic F. japonica, and results were also compared with the fatty acid profile of other strains. The absence of known brevetoxins in F. japonica algal extracts was also highlighted, leading to the hypothesis that the toxicity of F. japonica may be due to a synergic effect of PUFAs and ROS. Another microalgae that was studied in this thesis is the benthic dinoflagellate Ostreopsis cf. ovata. This species was investigated with the aim to investigate the effect of environmental parameters on its growth and toxicity. O. cf. ovata, in fact, shows different blooming periods along the Italian coasts and even the reported toxic effects are variable. The results of this work confirmed the high variability in the growth dynamic and toxin content of several Italian strains which were isolated in recent years along the Adriatic and Tyrrhenian Seas. Moreover, the effects of temperature and salinity on the behaviour of the different isolates are in good agreement with the results obtained from field surveys, which evidence as the environmental parameters are important factors modulating O. cf. ovata proliferation. Another relevant result that was highlighted is the anomaly in the production of palytoxin-like compounds reported by one of the studied isolate, in particular the one isolated in 2008 in Ancona (Adriatic Sea). Only this strain reported the absence of two (ovatoxin-b and –c) of the five ovatoxins so far known in the toxin profile and a different relative abundance of the other toxins. The last aspect that was studied in this thesis regards the toxin biosythesis. In fact, toxins produced (palytoxin-like compounds) or supposed to be produced (brevetoxin-like compounds) by O. cf. ovata and F. japonica, respectively, are polyketides, which are highly oxygenated compounds synthesized by complex enzymes known as polyketide synthase (PKS) enzymes. These enzymes are multi-domain complexes that structurally and functionally resemble the fatty acid synthases (FASs). This work reports the first study of PKS proteins in the dinoflagellates O. cf. ovata, C. monotis and in the raphidophyte F. japonica. For the first time some PKSs were identified in these species, confirming the presence of PKS proteins predicted by the in silico translation of the transcripts found in K. brevis also in other species. The identification of O. cf. ovata PKSs and the localization of the palytoxin-like compounds produced by this dinoflagellate in a similar location (chloroplast) as that observed for other dinoflagellate and cyanobacterial toxins provides some indication that these proteins may be involved in polyketide biosynthesis. However, their potential function as fatty acid synthases cannot be ruled out, as plant fatty acid synthesis also occurs within chloroplasts. This last hypothesis is also supported by the fact that in all the investigated species, and in particular in F. japonica, PKS proteins were present. Therefore, these results provide an important contribution to the study of the polyketides and of the involvement of PKS proteins in the toxin biosynthesis.

Caratterizzazione Citogenetico-Molecolare delle alterazioni cromosomiche 3q26 e 1p36 nelle Sindromi Mieloproliferative

L’overespressione dei geni EVI1(3q26) e PRDM16(1p36), è descritta sia in presenza che in assenza di riarrangiamenti 3q26 e 1p36 in specifici sottogruppi citogenetici di LAM, ed è associata ad una prognosi sfavorevole. Lo scopo principale del nostro studio è stato identificare e caratterizzare tramite FISH e RQ-PCR, alterazioni di EVI1 e PRDM16 in pazienti con alterazioni cromosomiche 3q e 1p.Riarrangiamenti di EVI1 si associavano ad alterazioni cromosomiche 3q26, ma, in 6 casi (6/35;17,1%) erano presenti in assenza di coinvolgimenti, in citogenetica convenzionale, della regione 3q26, a causa di meccanismi complessi e/o alterazioni ‘criptiche’. Inoltre, abbiamo identificato quattro nuovi riarrangiamenti di EVI1, tra cui due nuove traslocazioni simili presenti in due fratelli. Riarrangiamenti e/o amplificazioni di PRDM16 erano spesso associate ad alterazioni 1p36 (7/14;50%). L’analisi di EVI1 e PRDM16 è stata estesa ad altri casi con alterazioni -7/7q-, con cariotipo normale, con alterazioni 3q per PRDM16 e con alterazioni 1p per EVI1. L’overespressione di EVI1 era presente solo nel gruppo -7/7q- (10/58;17.2%) ed in un caso si associava ad amplificazione genica, mentre PRDM16 era overespresso in casi di tutti i gruppi analizzati,sia con cariotipi complessi, dove si associava in alcuni casi ad amplificazione genica, sia con cariotipi normali o con singole alterazioni. Il nostro studio dimostra come la FISH permetta di identificare alterazioni dei geni EVI1 e PRDM16, anche in assenza di coinvolgimenti delle regioni 3q26 e 1p36. Riarrangiamenti complessi e/o una scarsa qualità dei preparati citogenetici sono le cause principali per la mancata identificazione di queste alterazioni. La RQ-PCR permette di identificare l’overespressione anche nei casi in cui non sia dovuta ad alterazioni citogenetiche. È importante confermare con FISH e/o RQ-PCR il coinvolgimento di questi due geni, per individuare alla diagnosi pazienti con prognosi sfavorevole e che potranno beneficiare di terapie maggiormente aggressive e/o di trapianto allogenico di cellule staminali.

Integrated analysis and design of optimization and up-scaling of inductively coupled plasma synthesis of nanoparticles

This study is focused on radio-frequency inductively coupled thermal plasma (ICP) synthesis of nanoparticles, combining experimental and modelling approaches towards process optimization and industrial scale-up, in the framework of the FP7-NMP SIMBA European project (Scaling-up of ICP technology for continuous production of Metallic nanopowders for Battery Applications). First the state of the art of nanoparticle production through conventional and plasma routes is summarized, then results for the characterization of the plasma source and on the investigation of the nanoparticle synthesis phenomenon, aiming at highlighting fundamental process parameters while adopting a design oriented modelling approach, are presented. In particular, an energy balance of the torch and of the reaction chamber, employing a calorimetric method, is presented, while results for three- and two-dimensional modelling of an ICP system are compared with calorimetric and enthalpy probe measurements to validate the temperature field predicted by the model and used to characterize the ICP system under powder-free conditions. Moreover, results from the modeling of critical phases of ICP synthesis process, such as precursor evaporation, vapour conversion in nanoparticles and nanoparticle growth, are presented, with the aim of providing useful insights both for the design and optimization of the process and on the underlying physical phenomena. Indeed, precursor evaporation, one of the phases holding the highest impact on industrial feasibility of the process, is discussed; by employing models to describe particle trajectories and thermal histories, adapted from the ones originally developed for other plasma technologies or applications, such as DC non-transferred arc torches and powder spherodization, the evaporation of micro-sized Si solid precursor in a laboratory scale ICP system is investigated. Finally, a discussion on the role of thermo-fluid dynamic fields on nano-particle formation is presented, as well as a study on the effect of the reaction chamber geometry on produced nanoparticle characteristics and process yield.

General effective medium model for the complex permittivity extraction with an open-ended coaxial probe in presence of a multilayer material under test

The work presented in this thesis is focused on the open-ended coaxial-probe frequency-domain reflectometry technique for complex permittivity measurement at microwave frequencies of dispersive dielectric multilayer materials. An effective dielectric model is introduced and validated to extend the applicability of this technique to multilayer materials in on-line system context. In addition, the thesis presents: 1) a numerical study regarding the imperfectness of the contact at the probe-material interface, 2) a review of the available models and techniques, 3) a new classification of the extraction schemes with guidelines on how they can be used to improve the overall performance of the probe according to the problem requirements.