Effetto crowding e dislessia evolutiva: un confronto inter e intra-linguistico

Crowding is defined as the negative effect obtained by adding visual distractors around a central target which has to be identified. Some studies have suggested the presence of a marked crowding effect in developmental dyslexia (e.g. Atkinson, 1991; Spinelli et al., 2002). Inspired by Spinelli’s (2002) experimental design, we explored the hypothesis that the crowding effect may affect dyslexics’ response times (RTs) and accuracy in identification tasks dealing with words, pseudowords, illegal non-words and symbolstrings. Moreover, our study aimed to clarify the relationship between the crowding phenomenon and the word-reading process, in an inter-language comparison perspective. For this purpose we studied twenty-two French dyslexics and twenty-two Italian dyslexics (total forty-four dyslexics), compared to forty-four subjects matched for reading level (22 French and 22 Italians) and forty-four chronological age-matched subjects (22 French and 22 Italians). Children were all tested on reading and cognitive abilities. Results showed no differences between French and Italian participants suggesting that performances were homogenous. Dyslexic children were all significantly impaired in words and pseudowords reading compared to their normal reading controls. Regarding the identification task with which we assessed crowding effect, both accuracy and RTs showed a lexicality effect which meant that the recognition of words was more accurate and faster in words than pseudowords, non-words and symbolstrings. Moreover, compared to normal readers, dyslexics’ RTs and accuracy were impaired only for verbal materials but not for non-verbal material; these results are in line with the phonological hypothesis (Griffiths & Snowling, 2002; Snowling, 2000; 2006) . RTs revealed a general crowding effect (RTs in the crowding condition were slower than those recorded in the isolated condition) affecting all the subjects’ performances. This effect, however, emerged to be not specific for dyslexics. Data didn’t reveal a significant effect of language, allowing the generalization of the obtained results. We also analyzed the performance of two subgroups of dyslexics, categorized according to their reading abilities. The two subgroups produced different results regarding the crowding effect and type of material, suggesting that it is meaningful to take into account also the heterogeneity of the dyslexia disorder. Finally, we also analyzed the relationship of the identification task with both reading and cognitive abilities. In conclusion, this study points out the importance of comparing visual tasks performances of dyslexic participants with those of their reading level-matched controls. This approach may improve our comprehension of the potential causal link between crowding and reading (Goswami, 2003).

Sviluppo di biosensori: modifiche di superfici elettrodiche e sistemi di immobilizzazione enzimatica

An amperometric glucose biosensor was developed using an anionic clay matrix (LDH) as enzyme support. The enzyme glucose oxidase (GOx) was immobilized on a layered double hydroxide Ni/Al-NO3 LDH during the electrosynthesis, which was followed by crosslinking with glutaraldehyde (GA) vapours or with GA and bovine serum albumin (GABSA) to avoid the enzyme release. The electrochemical reaction was carried out potentiostatically, at -0.9V vs. SCE, using a rotating disc Pt electrode to assure homogeneity of the electrodeposition suspension, containing GOx, Ni(NO3)2 and Al(NO3)3 in 0.3 M KNO3. The mechanism responsible of the LDH electrodeposition involves the precipitation of the LDH due to the increase of pH at the surface of the electrode, following the cathodic reduction of nitrates. The Pt surface modified with the Ni/Al-NO3 LDH shows a much reduced noise, giving rise to a better signal to noise ratio for the currents relative to H2O2 oxidation, and a linear range for H2O2 determination wider than the one observed for bare Pt electrodes. We pointed out the performances of the biosensor in terms of sensitivity to glucose, calculated from the slope of the linear part of the calibration curve for enzimatically produced H2O2; the sensitivity was dependent on parameters related to the electrodeposition in addition to working conditions. In order to optimise the glucose biosensor performances, with a reduced number of experimental runs, we applied an experimental design. A first screening was performed considering the following variables: deposition time (30 - 120 s), enzyme concentration (0.5 - 3.0 mg/mL), Ni/Al molar ratio (3:1 or 2:1) of the electrodeposition solution at a total metals concentration of 0.03 M and pH of the working buffer solution (5.5-7.0). On the basis of the results from this screening, a full factorial design was carried out, taking into account only enzyme concentration and Ni/Al molar ratio of the electrosynthesis solution. A full factorial design was performed to study linear interactions between factors and their quadratic effects and the optimal setup was evaluated by the isoresponse curves. The significant factors were: enzyme concentration (linear and quadratic terms) and the interaction between enzyme concentration and Ni/Al molar ratio. Since the major obstacle for application of amperometric glucose biosensors is the interference signal resulting from other electro-oxidizable species present in the real matrices, such as ascorbate (AA), the use of different permselective membranes on Pt-LDHGOx modified electrode was discussed with the aim of improving biosensor selectivity and stability. Conventional membranes obtained using Nafion, glutaraldehyde (GA) vapours, GA-BSA were tested together with more innovative materials like palladium hexacyanoferrate (PdHCF) and titania hydrogels. Particular attention has been devoted to hydrogels, because they possess some attractive features, which are generally considered to favour biosensor materials biocompatibility and, consequently, the functional enzyme stability. The Pt-LDH-GOx-PdHCF hydrogel biosensor presented an anti-interferant ability so that to be applied for an accurate glucose analysis in blood. To further improve the biosensor selectivity, protective membranes containing horseradish peroxidase (HRP) were also investigated with the aim of oxidising the interferants before they reach the electrode surface. In such a case glucose determination was also accomplished in real matrices with high AA content. Furthermore, the application of a LDH containing nickel in the oxidised state was performed not only as a support for the enzyme, but also as anti-interferant sistem. The result is very promising and it could be the starting point for further applications in the field of amperometric biosensors; the study could be extended to other oxidase enzymes.

Refined Estimation of Earthquake Source Parameters: Methods, Applications and Scaling Relationships

The objective of this work of thesis is the refined estimations of source parameters. To such a purpose we used two different approaches, one in the frequency domain and the other in the time domain. In frequency domain, we analyzed the P- and S-wave displacement spectra to estimate spectral parameters, that is corner frequencies and low frequency spectral amplitudes. We used a parametric modeling approach which is combined with a multi-step, non-linear inversion strategy and includes the correction for attenuation and site effects. The iterative multi-step procedure was applied to about 700 microearthquakes in the moment range 1011-1014 N•m and recorded at the dense, wide-dynamic range, seismic networks operating in Southern Apennines (Italy). The analysis of the source parameters is often complicated when we are not able to model the propagation accurately. In this case the empirical Green function approach is a very useful tool to study the seismic source properties. In fact the Empirical Green Functions (EGFs) consent to represent the contribution of propagation and site effects to signal without using approximate velocity models. An EGF is a recorded three-component set of time-histories of a small earthquake whose source mechanism and propagation path are similar to those of the master event. Thus, in time domain, the deconvolution method of Vallée (2004) was applied to calculate the source time functions (RSTFs) and to accurately estimate source size and rupture velocity. This technique was applied to 1) large event, that is Mw=6.3 2009 L’Aquila mainshock (Central Italy), 2) moderate events, that is cluster of earthquakes of 2009 L’Aquila sequence with moment magnitude ranging between 3 and 5.6, 3) small event, i.e. Mw=2.9 Laviano mainshock (Southern Italy).