Pre-clinical and clinical development of leukemia stem cell inhibitors in acute leukemias

In Leukemias, recent developments have demonstrated that the Hedgehog pathway plays a key-role in the peculiar ability of self renewal of leukemia stem cells. The aim of this research activity was to investigate, through a first in man, Phase I, open label, clinical trial, the role and the impact, mainly in terms of safety profile, adverse events and pharmacokinetics, of a Sonic Hedgehog inhibitor compound on a population of heavely pretreated patients affected by AML, CML, MF, or MDS, resistant or refractory to standard chemotherapy. Thirty-five patients have been enrolled. The drug was administered orally, in 28 days cycles, without rest periods. The compound showed a good safety profile. The half life was of 17-35 hours, justifying the daily administration. Significant signs of activity, in terms of reduction of bone marrow blast cell amount were seen in most of the patients enrolled. Interestingly, correlative biological studies demonstrated that, comparing the gene expression profyiling signature of separated CD34+ cells before and after one cycle of treatment, the most variably expressed genes were involved in the Hh pathway. Moreover, we observed that many genes involved in MDR (multidrug resistance)were significantly down regulated after treatment. These data might lead to future clinical trials based on combinatory approaches, including, for instance, Hh inhibitors and conventional chemotherapy.

Land use management in mountainous areas: combining ground-based and EO (Earth Observation) data to investigate the shallow landsliding susceptibility in the Duron valley (Trento, Italy).

Throughout the alpine domain, shallow landslides represent a serious geologic hazard, often causing severe damages to infrastructures, private properties, natural resources and in the most catastrophic events, threatening human lives. Landslides are a major factor of landscape evolution in mountainous and hilly regions and represent a critical issue for mountainous land management, since they cause loss of pastoral lands. In several alpine contexts, shallow landsliding distribution is strictly connected to the presence and condition of vegetation on the slopes. With the aid of high-resolution satellite images, it's possible to divide automatically the mountainous territory in land cover classes, which contribute with different magnitude to the stability of the slopes. The aim of this research is to combine EO (Earth Observation) land cover maps with ground-based measurements of the land cover properties. In order to achieve this goal, a new procedure has been developed to automatically detect grass mantle degradation patterns from satellite images. Moreover, innovative surveying techniques and instruments are tested to measure in situ the shear strength of grass mantle and the geomechanical and geotechnical properties of these alpine soils. Shallow landsliding distribution is assessed with the aid of physically based models, which use the EO-based map to distribute the resistance parameters across the landscape.

Analisi e ottimizzazione del servizio di raccolta e trasporto dei rifiuti anche in relazione alle tematiche ambientali: un'applicazione alla rete urbana di Bologna

Questo studio, che è stato realizzato in collaborazione con Hera, è un'analisi della gestione dei rifiuti a Bologna. La ricerca è stata effettuata su diversi livelli: un livello strategico il cui scopo è quello di identificare nuovi metodi per la raccolta dei rifiuti in funzione delle caratteristiche del territorio della città, un livello analitico che riguarda il miglioramento delle applicazioni informatiche di supporto, e livello ambientale che riguarda il calcolo delle emissioni in atmosfera di veicoli adibiti alla raccolta e al trasporto dei rifiuti. innanzitutto è stato necessario studiare Bologna e lo stato attuale dei servizi di raccolta dei rifiuti. È incrociando questi componenti che in questi ultimi tre anni sono state effettuate modifiche nel settore della gestione dei rifiuti. I capitoli seguenti sono inerenti le applicazioni informatiche a sostegno di tali attività: Siget e Optit. Siget è il programma di gestione del servizio, che attualmente viene utilizzato per tutte le attività connesse alla raccolta di rifiuti. È un programma costituito da moduli diversi, ma di sola la gestione dati. la sperimentazione con Optit ha aggiunto alla gestione dei dati la possibilità di avere tali dati in cartografia e di associare un algoritmo di routing. I dati archiviati in Siget hanno rappresentato il punto di partenza, l'input, e il raggiungimento di tutti punti raccolta l'obiettivo finale. L'ultimo capitolo è relativo allo studio dell'impatto ambientale di questi percorsi di raccolta dei rifiuti. Tale analisi, basata sulla valutazione empirica e sull'implementazione in Excel delle formule del Corinair mostra la fotografia del servizio nel 2010. Su questo aspetto Optit ha fornito il suo valore aggiunto, implementando nell'algoritmo anche le formule per il calcolo delle emissioni.

Comparing genetic and linguistic diversity in African populations with a focus on the Khoisan of southern Africa

The interaction between disciplines in the study of human population history is of primary importance, profiting from the biological and cultural characteristics of humankind. In fact, data from genetics, linguistics, archaeology and cultural anthropology can be combined to allow for a broader research perspective. This multidisciplinary approach is here applied to the study of the prehistory of sub-Saharan African populations: in this continent, where Homo sapiens originally started his evolution and diversification, the understanding of the patterns of human variation has a crucial relevance. For this dissertation, molecular data is interpreted and complemented with a major contribution from linguistics: linguistic data are compared to the genetic data and the research questions are contextualized within a linguistic perspective. In the four articles proposed, we analyze Y chromosome SNPs and STRs profiles and full mtDNA genomes on a representative number of samples to investigate key questions of African human variability. Some of these questions address i) the amount of genetic variation on a continental scale and the effects of the widespread migration of Bantu speakers, ii) the extent of ancient population structure, which has been lost in present day populations, iii) the colonization of the southern edge of the continent together with the degree of population contact/replacement, and iv) the prehistory of the diverse Khoisan ethnolinguistic groups, who were traditionally understudied despite representing one of the most ancient divergences of modern human phylogeny. Our results uncover a deep level of genetic structure within the continent and a multilayered pattern of contact between populations. These case studies represent a valuable contribution to the debate on our prehistory and open up further research threads.

Reverse Engineering tools: development and experimentation of innovative methods for physical and geometrical data integration and post-processing

In recent years, the use of Reverse Engineering systems has got a considerable interest for a wide number of applications. Therefore, many research activities are focused on accuracy and precision of the acquired data and post processing phase improvements. In this context, this PhD Thesis deals with the definition of two novel methods for data post processing and data fusion between physical and geometrical information. In particular a technique has been defined for error definition in 3D points’ coordinates acquired by an optical triangulation laser scanner, with the aim to identify adequate correction arrays to apply under different acquisition parameters and operative conditions. Systematic error in data acquired is thus compensated, in order to increase accuracy value. Moreover, the definition of a 3D thermogram is examined. Object geometrical information and its thermal properties, coming from a thermographic inspection, are combined in order to have a temperature value for each recognizable point. Data acquired by an optical triangulation laser scanner are also used to normalize temperature values and make thermal data independent from thermal-camera point of view.

Bayesian space-time data fusion for real-time forecasting and map uncertainty

Environmental computer models are deterministic models devoted to predict several environmental phenomena such as air pollution or meteorological events. Numerical model output is given in terms of averages over grid cells, usually at high spatial and temporal resolution. However, these outputs are often biased with unknown calibration and not equipped with any information about the associated uncertainty. Conversely, data collected at monitoring stations is more accurate since they essentially provide the true levels. Due the leading role played by numerical models, it now important to compare model output with observations. Statistical methods developed to combine numerical model output and station data are usually referred to as data fusion. In this work, we first combine ozone monitoring data with ozone predictions from the Eta-CMAQ air quality model in order to forecast real-time current 8-hour average ozone level defined as the average of the previous four hours, current hour, and predictions for the next three hours. We propose a Bayesian downscaler model based on first differences with a flexible coefficient structure and an efficient computational strategy to fit model parameters. Model validation for the eastern United States shows consequential improvement of our fully inferential approach compared with the current real-time forecasting system. Furthermore, we consider the introduction of temperature data from a weather forecast model into the downscaler, showing improved real-time ozone predictions. Finally, we introduce a hierarchical model to obtain spatially varying uncertainty associated with numerical model output. We show how we can learn about such uncertainty through suitable stochastic data fusion modeling using some external validation data. We illustrate our Bayesian model by providing the uncertainty map associated with a temperature output over the northeastern United States.

Homogeneous analysis of a sample of Open Clusters in the context of the BOCCE project and the Gaia-ESO Survey

The open clusters (OC) are gravitationally bound systems of a few tens or hundreds of stars. In our Galaxy, the Milky Way, we know about 3000 open clusters, of very different ages in the range of a few millions years to about 9 Gyr. OCs are mainly located in the Galactic thin disc, with distances from the Galactic centre in the range 4-22 kpc and a height scale on the disc of about 200 pc. Their chemical properties trace those of the environment in which they formed and the metallicity is in the range -0.5<[Fe/H]<+0.5 dex. Through photometry and spectroscopy it is possible to study relatively easily the properties of the OCs and estimate their age, distance, and chemistry. For these reasons they are considered primary tracers of the chemical properties and chemical evolution of the Galactic disc. The main subject of this thesis is the comprehensive study of several OCs. The research embraces two different projects: the Bologna Open Cluster Chemical Evolution project (BOCCE) and the Gaia-ESO Survey. The first is a long-term programme, aiming at studying the chemical evolution of the Milky Way disc by means of a homogeneous sample of OCs. The latter is a large public spectroscopy survey, conducted with the high-resolution spectrograph FLAMES@VLT and targeting about 10^5 stars in different part of the Galaxy and 10^4 stars in about 100 OCs. The common ground between the two projects is the study of the properties of the OCs as tracers of the disc's characteristics. The impressive scientific outcome of the Gaia-ESO Survey and the unique framework of homogeneity of the BOCCE project can propose, especially once combined together, a much more accurate description of the properties of the OCs. In turn, this will give fundamental constraints for the interpretation of the properties of the Galactic disc.

Development of new tools and devices for CMB and foreground data analysis and future experiments

The discovery of the Cosmic Microwave Background (CMB) radiation in 1965 is one of the fundamental milestones supporting the Big Bang theory. The CMB is one of the most important source of information in cosmology. The excellent accuracy of the recent CMB data of WMAP and Planck satellites confirmed the validity of the standard cosmological model and set a new challenge for the data analysis processes and their interpretation. In this thesis we deal with several aspects and useful tools of the data analysis. We focus on their optimization in order to have a complete exploitation of the Planck data and contribute to the final published results. The issues investigated are: the change of coordinates of CMB maps using the HEALPix package, the problem of the aliasing effect in the generation of low resolution maps, the comparison of the Angular Power Spectrum (APS) extraction performances of the optimal QML method, implemented in the code called BolPol, and the pseudo-Cl method, implemented in Cromaster. The QML method has been then applied to the Planck data at large angular scales to extract the CMB APS. The same method has been applied also to analyze the TT parity and the Low Variance anomalies in the Planck maps, showing a consistent deviation from the standard cosmological model, the possible origins for this results have been discussed. The Cromaster code instead has been applied to the 408 MHz and 1.42 GHz surveys focusing on the analysis of the APS of selected regions of the synchrotron emission. The new generation of CMB experiments will be dedicated to polarization measurements, for which are necessary high accuracy devices for separating the polarizations. Here a new technology, called Photonic Crystals, is exploited to develop a new polarization splitter device and its performances are compared to the devices used nowadays.

Application Platforms for the Internet of Things: Theory, Architecture, Protocols, Data Formats, and Privacy

The Internet of Things (IoT) is the next industrial revolution: we will interact naturally with real and virtual devices as a key part of our daily life. This technology shift is expected to be greater than the Web and Mobile combined. As extremely different technologies are needed to build connected devices, the Internet of Things field is a junction between electronics, telecommunications and software engineering. Internet of Things application development happens in silos, often using proprietary and closed communication protocols. There is the common belief that only if we can solve the interoperability problem we can have a real Internet of Things. After a deep analysis of the IoT protocols, we identified a set of primitives for IoT applications. We argue that each IoT protocol can be expressed in term of those primitives, thus solving the interoperability problem at the application protocol level. Moreover, the primitives are network and transport independent and make no assumption in that regard. This dissertation presents our implementation of an IoT platform: the Ponte project. Privacy issues follows the rise of the Internet of Things: it is clear that the IoT must ensure resilience to attacks, data authentication, access control and client privacy. We argue that it is not possible to solve the privacy issue without solving the interoperability problem: enforcing privacy rules implies the need to limit and filter the data delivery process. However, filtering data require knowledge of how the format and the semantics of the data: after an analysis of the possible data formats and representations for the IoT, we identify JSON-LD and the Semantic Web as the best solution for IoT applications. Then, this dissertation present our approach to increase the throughput of filtering semantic data by a factor of ten.

Early Warning For Large Earthquakes: Observations, Models and Real-Time Data Analysis

This thesis is a collection of works focused on the topic of Earthquake Early Warning, with a special attention to large magnitude events. The topic is addressed from different points of view and the structure of the thesis reflects the variety of the aspects which have been analyzed. The first part is dedicated to the giant, 2011 Tohoku-Oki earthquake. The main features of the rupture process are first discussed. The earthquake is then used as a case study to test the feasibility Early Warning methodologies for very large events. Limitations of the standard approaches for large events arise in this chapter. The difficulties are related to the real-time magnitude estimate from the first few seconds of recorded signal. An evolutionary strategy for the real-time magnitude estimate is proposed and applied to the single Tohoku-Oki earthquake. In the second part of the thesis a larger number of earthquakes is analyzed, including small, moderate and large events. Starting from the measurement of two Early Warning parameters, the behavior of small and large earthquakes in the initial portion of recorded signals is investigated. The aim is to understand whether small and large earthquakes can be distinguished from the initial stage of their rupture process. A physical model and a plausible interpretation to justify the observations are proposed. The third part of the thesis is focused on practical, real-time approaches for the rapid identification of the potentially damaged zone during a seismic event. Two different approaches for the rapid prediction of the damage area are proposed and tested. The first one is a threshold-based method which uses traditional seismic data. Then an innovative approach using continuous, GPS data is explored. Both strategies improve the prediction of large scale effects of strong earthquakes.

Advanced modelling of time domain electromagnetic data with updated hydrogeological interpretations

Several countries have acquired, over the past decades, large amounts of area covering Airborne Electromagnetic data. Contribution of airborne geophysics has dramatically increased for both groundwater resource mapping and management proving how those systems are appropriate for large-scale and efficient groundwater surveying. We start with processing and inversion of two AEM dataset from two different systems collected over the Spiritwood Valley Aquifer area, Manitoba, Canada respectively, the AeroTEM III (commissioned by the Geological Survey of Canada in 2010) and the “Full waveform VTEM” dataset, collected and tested over the same survey area, during the fall 2011. We demonstrate that in the presence of multiple datasets, either AEM and ground data, due processing, inversion, post-processing, data integration and data calibration is the proper approach capable of providing reliable and consistent resistivity models. Our approach can be of interest to many end users, ranging from Geological Surveys, Universities to Private Companies, which are often proprietary of large geophysical databases to be interpreted for geological and\or hydrogeological purposes. In this study we deeply investigate the role of integration of several complimentary types of geophysical data collected over the same survey area. We show that data integration can improve inversions, reduce ambiguity and deliver high resolution results. We further attempt to use the final, most reliable output resistivity models as a solid basis for building a knowledge-driven 3D geological voxel-based model. A voxel approach allows a quantitative understanding of the hydrogeological setting of the area, and it can be further used to estimate the aquifers volumes (i.e. potential amount of groundwater resources) as well as hydrogeological flow model prediction. In addition, we investigated the impact of an AEM dataset towards hydrogeological mapping and 3D hydrogeological modeling, comparing it to having only a ground based TEM dataset and\or to having only boreholes data.

Multidimensional item response theory models with general and specific latent traits for ordinal data

The aim of the thesis is to propose a Bayesian estimation through Markov chain Monte Carlo of multidimensional item response theory models for graded responses with complex structures and correlated traits. In particular, this work focuses on the multiunidimensional and the additive underlying latent structures, considering that the first one is widely used and represents a classical approach in multidimensional item response analysis, while the second one is able to reflect the complexity of real interactions between items and respondents. A simulation study is conducted to evaluate the parameter recovery for the proposed models under different conditions (sample size, test and subtest length, number of response categories, and correlation structure). The results show that the parameter recovery is particularly sensitive to the sample size, due to the model complexity and the high number of parameters to be estimated. For a sufficiently large sample size the parameters of the multiunidimensional and additive graded response models are well reproduced. The results are also affected by the trade-off between the number of items constituting the test and the number of item categories. An application of the proposed models on response data collected to investigate Romagna and San Marino residents' perceptions and attitudes towards the tourism industry is also presented.

The application of a new psychotherapeutic strategy for enhancing eudaimonic well-being in children with mood and anxiety disorders

The aim of the dissertation was to test the feasibility of a new psychotherapeutic protocol for treating children and adolescents with mood and anxiety disorders: Child-Well-Being Therapy (CWBT). It originates from adult Well-Being Therapy protocol (WBT) and represents a conceptual innovation for treating affective disorders. WBT is based on the multidimensional model of well-being postulated by Ryff (eudaimonic perspective), in sequential combination with cognitive-behavioral therapy (CBT). Results showed that eudaimonic well-being was impaired in children with affective disorders in comparison with matched healthy students. A first open investigation aimed at exploring the feasibility of a 8-session CWBT protocol in a group of children with emotional and behavioural disorders has been implemented. Data showed how CWBT resulted associated to symptoms reduction, together with the decrease of externalizing problems, maintained at 1-year follow-up. CWBT triggered also an improvement in psychological well-being as well as an increasing flourishing trajectory over time. Subsequently, a modified and extended version of CWBT (12-sessions) has been developed and then tested in a controlled study with 34 patients (8 to 16 years) affected by mood and anxiety disorders. They were consecutively randomized into 3 different groups: CWBT, CBT, 6-month waiting list (WL). Both treatments resulted effective in decreasing distress and in improving well-being. Moreover, CWBT was associated with higher improvement in anxiety and showed a greater recovery rate (83%) than CBT (54%). Both groups maintained beneficial effects and CWBT group displayed a lower level of distress as well as a higher positive trend in well-being scores over time. Findings need to be interpret with caution, because of study limitations, however important clinical implications emerged. Further investigations should determine whether the sequential integration of well-being and symptom-oriented strategies could play an important role in children and adolescents’ psychotherapeutic options, fostering a successful adaptation to adversities during the growth process.

In vivo evaluation of the translations of the gleno-humeral joint using Magnetic resonance imaging

Gleno-humeral joint (GHJ) is the most mobile joint of the human body. This is related to theincongr uence between the large humeral head articulating with the much smaller glenoid (ratio 3:1). The GHJ laxity is the ability of the humeral head to be passively translated on the glenoid fossa and, when physiological, it guarantees the normal range of motion of the joint. Three-dimensional GHJ linear displacements have been measured, both in vivo and in vitro by means of different instrumental techniques. In vivo gleno-humeral displacements have been assessed by means of stereophotogrammetry, electromagnetic tracking sensors, and bio-imaging techniques. Both stereophotogrammetric systems and electromagnetic tracking devices, due to the deformation of the soft tissues surrounding the bones, are not capable to accurately assess small displacements, such as gleno-humeral joint translations. The bio-imaging techniques can ensure for an accurate joint kinematic (linear and angular displacement) description, but, due to the radiation exposure, most of these techniques, such as computer tomography or fluoroscopy, are invasive for patients. Among the bioimaging techniques, an alternative which could provide an acceptable level of accuracy and that is innocuous for patients is represented by magnetic resonance imaging (MRI). Unfortunately, only few studies have been conducted for three-dimensional analysis and very limited data is available in situations where preset loads are being applied. The general aim of this doctoral thesis is to develop a non-invasive methodology based on open-MRI for in-vivo evaluation of the gleno-humeral translation components in healthy subjects under the application of external loads.

Paleosol-based stratigraphy of late Quaternary deposits from the Po basin, between Bologna and the Po river (Northern Italy)

Stratigraphic studies carried out over the last decades in Italy and elsewhere testify a growing interest in Quaternary deposits and in the influence of climate change on their architecture. The subsurface of the Po Plain, in its topmost portion, is made up of alluvial deposits organized in depositional cycles at different scales. This PhD thesis provides millennial-scale stratigraphic reconstruction of the Late Pleistocene-Holocene deposits beneath the southern Po Plain, based on basin-scale correlation of laterally-extensive buried soil horizons. Far from the aim of characterizing palaeosols from a mineralogical and geochemical point of view, we focused on the physical and stratigraphic significance of these horizons. In the Bologna urban area, which hosts an abundance of stratigraphic data, the correlation between seventeen continuously-cored boreholes led to the identification of five vertically-stacked palaeosol-bounded sequences within the 14C time window. In a wide portion of the alluvial plain north of Bologna, far away from the Apenninic margin and from the Po River, where subsurface stratigraphic architecture is dominated by markedly lenticular sediment bodies, palaeosols revealed to be the only stratigraphic marker of remarkable lateral continuity. These horizons are characterized by peculiar resistance values, which make them easily identifiable via pocket penetration tests. Palaeosols reveal specific geometric relationships with the associated alluvial facies associations, allowing reliable estimates of soil development as a function of alluvial dynamics. With the aid of sixty new radiocarbon dates, a reliable age attribution and likely time intervals of exposure were assigned to each palaeosol. Vertically-stacked palaeosols delimitate short-term depositional cycles, likely related to the major episodes of climatic change of the last 40 ky. Through integration of stratigraphic data with 750 archaeological reports from the Bologna area, the impact of human settlements on depositional and pedogenic processes during the late Holocene was investigated.