Fenomeni di trasporto ed elettrostatici in membrane da Nanofiltrazione

Fenomeni di trasporto ed elettrostatici in membrane da Nanofiltrazione La capacità di predire le prestazioni delle membrane da nanofiltrazione è molto importante per il progetto e la gestione di processi di separazione a membrana. Tali prestazioni sono strettamente legate ai fenomeni di trasporto che regolano il moto dei soluti all’interno della matrice della membrana. Risulta, quindi, di rilevante importanza la conoscenza e lo studio di questi fenomeni; l’obiettivo finale è quello di mettere a punto modelli di trasporto appropriati che meglio descrivano il flusso dei soluti all’interno della membrana. A fianco dei modelli di trasporto ricopre, quindi, una importanza non secondaria la caratterizzazione dei parametri aggiustabili propri della membrana sulla quale si opera. La procedura di caratterizzazione di membrane deve chiarire le modalità di svolgimento delle prove sperimentali e le finalità che esse dovrebbero conseguire. Tuttavia, nonostante i miglioramenti concernenti la modellazione del trasporto di ioni in membrana ottenuti dalla ricerca negli ultimi anni, si è ancora lontani dall’avere a disposizione un modello univoco in grado di descrivere i fenomeni coinvolti in maniera chiara. Oltretutto, la palese incapacità del modello di non riuscire a prevedere gli andamenti sperimentali di reiezione nella gran parte dei casi relativi a miscele multicomponenti e le difficoltà legate alla convergenza numerica degli algoritmi risolutivi hanno fortemente limitato gli sviluppi del processo anche e soprattutto in termini applicativi. Non da ultimo, si avverte la necessità di poter prevedere ed interpretare l’andamento della carica di membrana al variare delle condizioni operative attraverso lo sviluppo di un modello matematico in grado di descrivere correttamente il meccanismo di formazione della carica. Nel caso di soluzioni elettrolitiche, infatti, è stato riconosciuto che la formazione della carica superficiale è tra i fattori che maggiormente caratterizzano le proprietà di separazione delle membrane. Essa gioca un ruolo importante nei processi di trasporto ed influenza la sua selettività nella separazione di molecole caricate; infatti la carica di membrana interagisce elettrostaticamente con gli ioni ed influenza l’efficienza di separazione degli stessi attraverso la partizione degli elettroliti dalla soluzione esterna all’interno dei pori del materiale. In sostanza, la carica delle membrane da NF è indotta dalle caratteristiche acide delle soluzioni elettrolitiche poste in contatto con la membrana stessa, nonché dal tipo e dalla concentrazione delle specie ioniche. Nello svolgimento di questo lavoro sono stati analizzati i principali fenomeni di trasporto ed elettrostatici coinvolti nel processo di nanofiltrazione, in particolare si è focalizzata l’attenzione sugli aspetti relativi alla loro modellazione matematica. La prima parte della tesi è dedicata con la presentazione del problema generale del trasporto di soluti all’interno di membrane da nanofiltrazione con riferimento alle equazioni alla base del modello DSP&DE, che rappresenta una razionalizzazione dei modelli esistenti sviluppati a partire dal modello DSPM, nel quale sono stati integrarti i fenomeni di esclusione dielettrica, per quanto riguarda la separazione di elettroliti nella filtrazione di soluzioni acquose in processi di Nanofiltrazione. Il modello DSP&DE, una volta definita la tipologia di elettroliti presenti nella soluzione alimentata e la loro concentrazione, viene completamente definito da tre parametri aggiustabili, strettamente riconducibili alle proprietà della singola membrana: il raggio medio dei pori all’interno della matrice, lo spessore effettivo e la densità di carica di membrana; in più può essere considerato un ulteriore parametro aggiustabile del modello il valore che la costante dielettrica del solvente assume quando confinato in pori di ridotte dimensioni. L’impostazione generale del modello DSP&DE, prevede la presentazione dei fenomeni di trasporto all’interno della membrana, descritti attraverso l’equazione di Nerst-Planck, e lo studio della ripartizione a ridosso dell’interfaccia membrana/soluzione esterna, che tiene in conto di diversi contributi: l’impedimento sterico, la non idealità della soluzione, l’effetto Donnan e l’esclusione dielettrica. Il capitolo si chiude con la presentazione di una procedura consigliata per la determinazione dei parametri aggiustabili del modello di trasporto. Il lavoro prosegue con una serie di applicazioni del modello a dati sperimentali ottenuti dalla caratterizzazione di membrane organiche CSM NE70 nel caso di soluzioni contenenti elettroliti. In particolare il modello viene applicato quale strumento atto ad ottenere informazioni utili per lo studio dei fenomeni coinvolti nel meccanismo di formazione della carica; dall’elaborazione dei dati sperimentali di reiezione in funzione del flusso è possibile ottenere dei valori di carica di membrana, assunta quale parametro aggiustabile del modello. che permettono di analizzare con affidabilità gli andamenti qualitativi ottenuti per la carica volumetrica di membrana al variare della concentrazione di sale nella corrente in alimentazione, del tipo di elettrolita studiato e del pH della soluzione. La seconda parte della tesi relativa allo studio ed alla modellazione del meccanismo di formazione della carica. Il punto di partenza di questo studio è rappresentato dai valori di carica ottenuti dall’elaborazione dei dati sperimentali di reiezione con il modello di trasporto, e tali valori verranno considerati quali valori “sperimentali” di riferimento con i quali confrontare i risultati ottenuti. Nella sezione di riferimento è contenuta la presentazione del modello teorico “adsorption-amphoteric” sviluppato al fine di descrivere ed interpretare i diversi comportamenti sperimentali ottenuti per la carica di membrana al variare delle condizioni operative. Nel modello la membrana è schematizzata come un insieme di siti attivi di due specie: il gruppo di siti idrofobici e quello de siti idrofilici, in grado di supportare le cariche derivanti da differenti meccanismi chimici e fisici. I principali fenomeni presi in considerazione nel determinare la carica volumetrica di membrana sono: i) la dissociazione acido/base dei siti idrofilici; ii) il site-binding dei contro-ioni sui siti idrofilici dissociati; iii) l’adsorbimento competitivo degli ioni in soluzione sui gruppi funzionali idrofobici. La struttura del modello è del tutto generale ed è in grado di mettere in evidenza quali sono i fenomeni rilevanti che intervengono nel determinare la carica di membrana; per questo motivo il modello permette di indagare il contributo di ciascun meccanismo considerato, in funzione delle condizioni operative. L’applicazione ai valori di carica disponibili per membrane Desal 5-DK nel caso di soluzioni contenenti singoli elettroliti, in particolare NaCl e CaCl2 permette di mettere in evidenza due aspetti fondamentali del modello: in primis la sua capacità di descrivere andamenti molto diversi tra loro per la carica di membrana facendo riferimento agli stessi tre semplici meccanismi, dall’altra parte permette di studiare l’effetto di ciascun meccanismo sull’andamento della carica totale di membrana e il suo peso relativo. Infine vengono verificate le previsioni ottenute con il modello dal suddetto studio attraverso il confronto con dati sperimentali di carica ottenuti dall’elaborazione dei dati sperimentali di reiezione disponibili per il caso di membrane CSM NE70. Tale confronto ha messo in evidenza le buone capacità previsionali del modello soprattutto nel caso di elettroliti non simmetrici quali CaCl2 e Na2SO4. In particolare nel caso un cui lo ione divalente rappresenta il contro-ione rispetto alla carica propria di membrana, la carica di membrana è caratterizzata da un andamento unimodale (contraddistinto da un estremante) con la concentrazione di sale in alimentazione. Il lavoro viene concluso con l’estensione del modello ADS-AMF al caso di soluzioni multicomponenti: è presentata una regola di mescolamento che permette di ottenere la carica per le soluzioni elettrolitiche multicomponenti a partire dai valori disponibili per i singoli ioni componenti la miscela.

Knowledge Flows and Networks: the Interplay between Local and Global Linkages within Bangalore IT Cluster

This doctoral work gains deeper insight into the dynamics of knowledge flows within and across clusters, unfolding their features, directions and strategic implications. Alliances, networks and personnel mobility are acknowledged as the three main channels of inter-firm knowledge flows, thus offering three heterogeneous measures to analyze the phenomenon. The interplay between the three channels and the richness of available research methods, has allowed for the elaboration of three different papers and perspectives. The common empirical setting is the IT cluster in Bangalore, for its distinguished features as a high-tech cluster and for its steady yearly two-digit growth around the service-based business model. The first paper deploys both a firm-level and a tie-level analysis, exploring the cases of 4 domestic companies and of 2 MNCs active the cluster, according to a cluster-based perspective. The distinction between business-domain knowledge and technical knowledge emerges from the qualitative evidence, further confirmed by quantitative analyses at tie-level. At firm-level, the specialization degree seems to be influencing the kind of knowledge shared, while at tie-level both the frequency of interaction and the governance mode prove to determine differences in the distribution of knowledge flows. The second paper zooms out and considers the inter-firm networks; particularly focusing on the role of cluster boundary, internal and external networks are analyzed, in their size, long-term orientation and exploration degree. The research method is purely qualitative and allows for the observation of the evolving strategic role of internal network: from exploitation-based to exploration-based. Moreover, a causal pattern is emphasized, linking the evolution and features of the external network to the evolution and features of internal network. The final paper addresses the softer and more micro-level side of knowledge flows: personnel mobility. A social capital perspective is here developed, which considers both employees’ acquisition and employees’ loss as building inter-firm ties, thus enhancing company’s overall social capital. Negative binomial regression analyses at dyad-level test the significant impact of cluster affiliation (cluster firms vs non-cluster firms), industry affiliation (IT firms vs non-IT fims) and foreign affiliation (MNCs vs domestic firms) in shaping the uneven distribution of personnel mobility, and thus of knowledge flows, among companies.

Integrazione di tecnologie non distruttive per la caratterizzazione di rocce ornamentali

ABSTRACT: The dimension stone qualification through the use of non-destructive tests (NDT) is a relevant research topic for the industrial characterisation of finite products, because the competition of low-costs products can be sustained by an offer of highqualification and a top-guarantee products. The synthesis of potentialities offered by the NDT is the qualification and guarantee similar to the well known agro-industrial PDO, Protected Denomination of Origin. In fact it is possible to guarantee both, the origin and the quality of each stone product element, even through a Factory Production Control on line. A specific disciplinary is needed. A research developed at DICMA-Univ. Bologna in the frame of the “OSMATER” INTERREG project, allowed identifying good correlations between destructive and non-destructive tests for some types of materials from Verbano-Cusio-Ossola region. For example non conventional ultrasonic tests, image analysis parameters, water absorption and other measurements showed to be well correlated with the bending resistance, by relationships varying for each product. In conclusion it has been demonstrated that a nondestructive approach allows reaching several goals, among the most important: 1) the identification of materials; 2) the selection of products; 3) the substitution of DT by NDT. Now it is necessary to move from a research phase to the industrial implementation, as well as to develop new ND technologies focused on specific aims.

Materiali Ceramici per Edilizia con Funzionalità Fotocatalitica

This thesis wad aimed at the study and application of titanium dioxide photocatalytic activity on ceramic materials. As a matter of fact, photocatalysis is a very promising method to face most of the problems connected with the increasing environmental pollution. Furthermore, titanium dioxide, in its anatase crystallographic phase, is one of the most investigated photocatalytic material and results to be perfectly compatible with silicate body mixes. That goal was pursued by two different strategies: 1. the addition to a body mix used for heavy clay products of several titania powders, with different mean crystallite size, surface area, morphology and anatase/rutile ratio and a titania nanosuspension as well. The titania addition followed two procedures: bulk and spray addition over the ceramic samples surface. Titania was added in two different percentages: 2.5 and 7.5 wt.% in both of the methods. The ceramic samples were then fired at three maximum temperatures: 900, 950 and 1000 °C. Afterwards, the photocatalytic activity of the prepared ceramic samples was evaluated by following the degradation of an organic compound in aqueous medium, under UV radiation. The influence of titania morphological characteristics on the photoactivity of the fired materials was studied by means of XRD and SEM observations. The ceramic samples, sprayed with a slip containing 7.5 wt.% of titania powder and fired at 900 °C, have the best photoactivity, with a complete photo-decomposition of the organic compound. At 1000 °C no sample acted as a photocatalyst due to the anatase-to-rutile phase transformation and to the reaction between titania and calcium and iron oxides in the raw materials. 2. The second one foresaw the synthesis of TiO2-SiO2 solid solutions, using the following stoichiometry: Ti1-xSixO2 where x = 0, 0.1, 0.3 and 0.5 atoms per formula unit (apfu). The mixtures were then fired following two thermal cycles, each with three maximum temperatures. The effect of SiO2 addition into the TiO2 crystal structure and, consequently, on its photocatalytic activity when fired at high temperature, was thoroughly investigated by means of XRD, XPS, FE-SEM, TEM and BET analysis. The photoactivity of the prepared powders was assessed both in gas and liquid phase. Subsequently, the TiO2-SiO2 solid solutions, previously fired at 900 °C, were sprayed over the ceramic samples surface in the percentage of 7.5 wt.%. The prepared ceramic samples were fired at 900 and 1000 °C. The photocatalytic activity of the ceramic samples was evaluated in liquid phase. Unfortunately, that samples did not show any appreciable photoactivity. In fact, samples fired at 900 °C showed a pretty low photoactivity, while the one fired at 1000 °C showed no photoactivity at all. This was explained by the excessive coarsening of titania particles. To summarise, titania particle size, more than its crystalline phase, seems to have a relevant role in the photocatalytic activity of the ceramic samples.

Costruzione di un Sistema Informativo Geografico Digitale per analisi ambientali

Questo lavoro ha come obiettivo l’utilizzo del Geographical Information System (GIS) per effettuare analisi di sicurezza, monitoraggio e valutazioni di impatto ambientale. Oggi, la totalità delle operazioni GIS possono essere svolte con software open source e in questa sedi si è scelto di utilizzare il GIS GRASS (Geographic Resources Analysis Support System) disponibile nei termini della GNU public license (GPL), mostrando l’usabilità e le notevoli potenzialità di tale software, nonché la qualità dei prodotti ottenibili, mai inferiori ai prodotti e agli strumenti messi a disposizione dai più radicati e diffusi programmi proprietari. Nel capitolo 4, vedremo l’applicazione all’analisi delle conseguenze di ipotetici incidenti, durante le operazioni di dismissione dell’impianto di processamento del combustibile nucleare, di Bosco Marengo (AL). Nel capitolo 5, vedremo applicazioni nel campo del monitoraggio della qualità dell’aria tramite analisi di immagini satellitari.

Spatial mechanisms for modelling the human ankle passive motion

Knowledge on how ligaments and articular surfaces guide passive motion at the human ankle joint complex is fundamental for the design of relevant surgical treatments. The dissertation presents a possible improvement of this knowledge by a new kinematic model of the tibiotalar articulation. In this dissertation two one-DOF spatial equivalent mechanisms are presented for the simulation of the passive motion of the human ankle joint: the 5-5 fully parallel mechanism and the fully parallel spherical wrist mechanism. These mechanisms are based on the main anatomical structures of the ankle joint, namely the talus/calcaneus and the tibio/fibula bones at their interface, and the TiCaL and CaFiL ligaments. In order to show the accuracy of the models and the efficiency of the proposed procedure, these mechanisms are synthesized from experimental data and the results are compared with those obtained both during experimental sessions and with data published in the literature. Experimental results proved the efficiency of the proposed new mechanisms to simulate the ankle passive motion and, at the same time, the potentiality of the mechanism to replicate the ankle’s main anatomical structures quite well. The new mechanisms represent a powerful tool for both pre-operation planning and new prosthesis design.

Numerical and analytical vibro-acoustic modelling of porous materials: the Cell Method for poroelasticity and the case of inclusions

Porous materials are widely used in many fields of industrial applications, to achieve the requirements of noise reduction, that nowadays derive from strict regulations. The modeling of porous materials is still a problematic issue. Numerical simulations are often problematic in case of real complex geometries, especially in terms of computational times and convergence. At the same time, analytical models, even if partly limited by restrictive simplificative hypotheses, represent a powerful instrument to capture quickly the physics of the problem and general trends. In this context, a recently developed numerical method, called the Cell Method, is described, is presented in the case of the Biot's theory and applied for representative cases. The peculiarity of the Cell Method is that it allows for a direct algebraic and geometrical discretization of the field equations, without any reduction to a weak integral form. Then, the second part of the thesis presents the case of interaction between two poroelastic materials under the context of double porosity. The idea of using periodically repeated inclusions of a second porous material into a layer composed by an original material is described. In particular, the problem is addressed considering the efficiency of the analytical method. A analytical procedure for the simulation of heterogeneous layers based is described and validated considering both conditions of absorption and transmission; a comparison with the available numerical methods is performed. ---------------- I materiali porosi sono ampiamente utilizzati per diverse applicazioni industriali, al fine di raggiungere gli obiettivi di riduzione del rumore, che sono resi impegnativi da norme al giorno d'oggi sempre più stringenti. La modellazione dei materiali porori per applicazioni vibro-acustiche rapprensenta un aspetto di una certa complessità. Le simulazioni numeriche sono spesso problematiche quando siano coinvolte geometrie di pezzi reali, in particolare riguardo i tempi computazionali e la convergenza. Allo stesso tempo, i modelli analitici, anche se parzialmente limitati a causa di ipotesi semplificative che ne restringono l'ambito di utilizzo, rappresentano uno strumento molto utile per comprendere rapidamente la fisica del problema e individuare tendenze generali. In questo contesto, un metodo numerico recentemente sviluppato, il Metodo delle Celle, viene descritto, implementato nel caso della teoria di Biot per la poroelasticità e applicato a casi rappresentativi. La peculiarità del Metodo delle Celle consiste nella discretizzazione diretta algebrica e geometrica delle equazioni di campo, senza alcuna riduzione a forme integrali deboli. Successivamente, nella seconda parte della tesi viene presentato il caso delle interazioni tra due materiali poroelastici a contatto, nel contesto dei materiali a doppia porosità. Viene descritta l'idea di utilizzare inclusioni periodicamente ripetute di un secondo materiale poroso all'interno di un layer a sua volta poroso. In particolare, il problema è studiando il metodo analitico e la sua efficienza. Una procedura analitica per il calcolo di strati eterogenei di materiale viene descritta e validata considerando sia condizioni di assorbimento, sia di trasmissione; viene effettuata una comparazione con i metodi numerici a disposizione.

Mass transport in polymers

The study of mass transport in polymeric membranes has grown in importance due to its potential application in many processes such as separation of gases and vapors, packaging, controlled drug release. The diffusion of a low molecular weight species in a polymer is often accompanied by other phenomena like swelling, reactions, stresses, that have not been investigated in all their aspects yet. Furthermore, novel materials have been developed that include inorganic fillers, reactive functional groups or ions, that make the scenery even more complicated. The present work focused on the experimental study of systems where the diffusion is accompanied by other processes; suitable models were also developed to describe the particular circumstances in order to understand the underlying concepts and be able to design the performances of the material. The effect of solvent-induced deformation in polymeric films during sorption processes was studied since the dilation, especially in constrained membranes, can cause the development of stresses and therefore early failures of the material. The bending beam technique was used to test the effects of the dilation and the stress induced in the polymer by penetrant diffusion. A model based on the laminate theory was developed that accounts for the swelling and is able to predict the stress that raise in the material. The addition of inorganic fillers affects the transport properties of polymeric films. Mixed matrix membranes based on fluorinated, high free volume matrices show attractive performances for separation purposes but there is a need for deeper investigation of the selectivity properties towards gases and vapors. A new procedure based on the NELF model was tested on the experimental data; it allows to predict solubility of every penetrant on the basis of data for one vapor. The method has proved to be useful also for the determination of the diffusion coefficient and for an estimation of the permeability in the composite materials. Oxygen scavenging systems can overcome lack of barrier properties in common polymers that forbids their application in sensitive applications as food packaging. The final goal of obtaining a membrane almost impermeable to oxygen leads to experimental times out of reach. Hence, a simple model was developed in order to describe the transport of oxygen in a membrane with also reactive groups and analyze the experimental data collected on SBS copolymers that show attractive scavenging capacity. Furthermore, a model for predicting the oxygen barrier behavior of a film formed as a blend of OSP in a common packaging material was built, considering particles capable of reactions with oxygen embedded in a non-reactive matrix. Perfluorosulphonic acid ionomers (PFSI) are capturing attention due to a high thermal and chemical resistance coupled with very peculiar transport properties, that make them appropriate to be used in fuel cells. The possible effect of different formation procedure was studied together with the swelling due to water sorption since both water uptake and dilation can dramatically affect the fuel cells performances. The water diffusion and sorption was studied with a FTIR-ATR spectrometer that can give deeper information on the bonds between water molecules and the sulphonic hydrophilic groups and, therefore, on the microstructure of the hydrated ionomer.

Caratterizzazione di membrane metalliche e ionomeriche per applicazioni energetiche

The work of this thesis has been focused on the characterization of metallic membranes for the hydrogen purification from steam reforming process and also of perfluorosulphonic acid ionomeric (PFSI) membranes suitable as electrolytes in fuel cell applications. The experimental study of metallic membranes was divided in three sections: synthesis of palladium and silver palladium coatings on porous ceramic support via electroless deposition (ELD), solubility and diffusivity analysis of hydrogen in palladium based alloys (temperature range between 200 and 400 °C up to 12 bar of pressure) and permeation experiments of pure hydrogen and mixtures containing, besides hydrogen, also nitrogen and methane at high temperatures (up to 600 °C) and pressures (up to 10 bar). Sequential deposition of palladium and silver on to porous alumina tubes by ELD technique was carried out using two different procedures: a stirred batch and a continuous flux method. Pure palladium as well as Pd-Ag membranes were produced: the Pd-Ag membranes’ composition is calculated to be close to 77% Pd and 23% Ag by weight which was the target value that correspond to the best performance of the palladium-based alloys. One of the membranes produced showed an infinite selectivity through hydrogen and relatively high permeability value and is suitable for the potential use as a hydrogen separator. The hydrogen sorption in silver palladium alloys was carried out in a gravimetric system on films produced by ELD technique. In the temperature range inspected, up to 400°C, there is still a lack in literature. The experimental data were analyzed with rigorous equations allowing to calculate the enthalpy and entropy values of the Sieverts’ constant; the results were in very good agreement with the extrapolation made with literature data obtained a lower temperature (up to 150 °C). The information obtained in this study would be directly usable in the modeling of hydrogen permeation in Pd-based systems. Pure and mixed gas permeation tests were performed on Pd-based hydrogen selective membranes at operative conditions close to steam-reforming ones. Two membranes (one produced in this work and another produced by NGK Insulators Japan) showed a virtually infinite selectivity and good permeability. Mixture data revealed the existence of non negligible resistances to hydrogen transport in the gas phase. Even if the decrease of the driving force due to polarization concentration phenomena occurs, in principle, in all membrane-based separation systems endowed with high perm-selectivity, an extensive experimental analysis lack, at the moment, in the palladium-based membrane process in literature. Moreover a new procedure has been introduced for the proper comparison of the mass transport resistance in the gas phase and in the membrane. Another object of study was the water vapor sorption and permeation in PFSI membranes with short and long side chains was also studied; moreover the permeation of gases (i.e. He, N2 and O2) in dry and humid conditions was considered. The water vapor sorption showed strong interactions between the hydrophilic groups and the water as revealed from the hysteresis in the sorption-desorption isotherms and thermo gravimetric analysis. The data obtained were used in the modeling of water vapor permeation, that was described as diffusion-reaction of water molecules, and in the humid gases permeation experiments. In the dry gas experiments the permeability and diffusivity was found to increase with temperature and with the equivalent weight (EW) of the membrane. A linear correlation was drawn between the dry gas permeability and the opposite of the equivalent weight of PFSI membranes, based on which the permeability of pure PTFE is retrieved in the limit of high EW. In the other hand O2 ,N2 and He permeability values was found to increase significantly, and in a similar fashion, with water activity. A model that considers the PFSI membrane as a composite matrix with a hydrophilic and a hydrophobic phase was considered allowing to estimate the variation of gas permeability with relative humidity on the basis of the permeability in the dry PFSI membrane and in pure liquid water.

Corporate Venture Capital: How established firms use external resources to create new competencies

This Doctoral Dissertation is triggered by an emergent trend: firms are increasingly referring to investments in corporate venture capital (CVC) as means to create new competencies and foster the search for competitive advantage through the use of external resources. CVC is generally defined as the practice by non-financial firms of placing equity investments in entrepreneurial companies. Thus, CVC can be interpreted (i) as a key component of corporate entrepreneurship - acts of organizational creation, renewal, or innovation that occur within or outside an existing organization– and (ii) as a particular form of venture capital (VC) investment where the investor is not a traditional and financial institution, but an established corporation. My Dissertation, thus, simultaneously refers to two streams of research: corporate strategy and venture capital. In particular, I directed my attention to three topics of particular relevance for better understanding the role of CVC. In the first study, I moved from the consideration that competitive environments with rapid technological changes increasingly force established corporations to access knowledge from external sources. Firms, thus, extensively engage in external business development activities through different forms of collaboration with partners. While the underlying process common to these mechanisms is one of knowledge access, they are substantially different. The aim of the first study is to figure out how corporations choose among CVC, alliance, joint venture and acquisition. I addressed this issue adopting a multi-theoretical framework where the resource-based view and real options theory are integrated. While the first study mainly looked into the use of external resources for corporate growth, in the second work, I combined an internal and an external perspective to figure out the relationship between CVC investments (exploiting external resources) and a more traditional strategy to create competitive advantage, that is, corporate diversification (based on internal resources). Adopting an explorative lens, I investigated how these different modes to renew corporate current capabilities interact to each other. More precisely, is CVC complementary or substitute to corporate diversification? Finally, the third study focused on the more general field of VC to investigate (i) how VC firms evaluate the patent portfolios of their potential investee companies and (ii) whether the ability to evaluate technology and intellectual property varies depending on the type of investors, in particular for what concern the distinction between specialized versus generalist VCs and independent versus corporate VCs. This topic is motivated by two observations. First, it is not clear yet which determinants of patent value are primarily considered by VCs in their investment decisions. Second, VCs are not all alike in terms of technological experiences and these differences need to be taken into account.

Bonded structures for enhanced damage tolerant pressurized fuselages

Adhesive bonding provides solutions to realize cost effective and low weight aircraft fuselage structures, in particular where the Damage Tolerance (DT) is the design criterion. Bonded structures that combine Metal Laminates (MLs) and eventually Selective Reinforcements can guarantee slow crack propagation, crack arrest and large damage capability. To optimize the design exploiting the benefit of bonded structures incorporating selective reinforcement requires reliable analysis tools. The effect of bonded doublers / selective reinforcements is very difficult to be predicted numerically or analytically due to the complexity of the underlying mechanisms and failures modes acting. Reliable predictions of crack growth and residual strength can only be based on sound empirical and phenomenological considerations strictly related to the specific structural concept. Large flat stiffened panels that combine MLs and selective reinforcements have been tested with the purpose of investigating solutions applicable to pressurized fuselages. The large test campaign (for a total of 35 stiffened panels) has quantitatively investigated the role of the different metallic skin concepts (monolithic vs. MLs) of the aluminum, titanium and glass-fiber reinforcements, of the stringers material and cross sections and of the geometry and location of doublers / selective reinforcements. Bonded doublers and selective reinforcements confirmed to be outstanding tools to improve the DT properties of structural elements with a minor weight increase. However the choice of proper materials for the skin and the stringers must be not underestimated since they play an important role as well. A fuselage structural concept has been developed to exploit the benefit of a metal laminate design concept in terms of high Fatigue and Damage Tolerance (F&DT) performances. The structure used laminated skin (0.8mm thick), bonded stringers, two different splicing solutions and selective reinforcements (glass prepreg embedded in the laminate) under the circumferential frames. To validate the design concept a curved panel was manufactured and tested under loading conditions representative of a single aisle fuselage: cyclic internal pressurization plus longitudinal loads. The geometry of the panel, design and loading conditions were tailored for the requirements of the upper front fuselage. The curved panel has been fatigue tested for 60 000 cycles before the introduction of artificial damages (cracks in longitudinal and circumferential directions). The crack growth of the artificial damages has been investigated for about 85 000 cycles. At the end a residual strength test has been performed with a “2 bay over broken frame” longitudinal crack. The reparability of this innovative concept has been taken into account during design and demonstrated with the use of an external riveted repair. The F&DT curved panel test has confirmed that a long fatigue life and high damage tolerance can be achieved with a hybrid metal laminate low weight configuration. The superior fatigue life from metal laminates and the high damage tolerance characteristics provided by integrated selective reinforcements are the key concepts that provided the excellent performances. The weight comparison between the innovative bonded concept and a conventional monolithic riveted design solution showed a significant potential weight saving but the weight advantages shall be traded off with the additional costs.

Evaluation of bone strength: microtomographic tecniques

This thesis is a part of a larger study about the characterization of mechanical and histomorphometrical properties of bone. The main objects of this study were the bone tissue properties and its resistance to mechanical loads. Moreover, the knowledge about the equipment selected to carry out the analyses, the micro-computed tomography (micro-CT), was improved. Particular attention was given to the reliability over time of the measuring instrument. In order to understand the main characteristics of bone mechanical properties a study of the skeletal, the bones of which it is composed and biological principles that drive their formation and remodelling, was necessary. This study has led to the definition of two macro-classes describing the main components responsible for the resistance to fracture of bone: quantity and quality of bone. The study of bone quantity is the current clinical standard measure for so-called bone densitometry, and research studies have amply demonstrated that the amount of tissue is correlated with its mechanical properties of elasticity and fracture. However, the models presented in the literature, including information on the mere quantity of tissue, have often been limited in describing the mechanical behaviour. Recent investigations have underlined that also the bone-structure and the tissue-mineralization play an important role in the mechanical characterization of bone tissue. For this reason in this thesis the class defined as bone quality was mainly studied, splitting it into two sub-classes of bone structure and tissue quality. A study on bone structure was designed to identify which structural parameters, among the several presented in the literature, could be integrated with the information about quantity, in order to better describe the mechanical properties of bone. In this way, it was also possible to analyse the iteration between structure and function. It has been known for long that bone tissue is capable of remodeling and changing its internal structure according to loads, but the dynamics of these changes are still being analysed. This part of the study was aimed to identify the parameters that could quantify the structural changes of bone tissue during the development of a given disease: osteoarthritis. A study on tissue quality would have to be divided into different classes, which would require a scale of analysis not suitable for the micro-CT. For this reason the study was focused only on the mineralization of the tissue, highlighting the difference between bone density and tissue density, working in a context where there is still an ongoing scientific debate.

Sviluppo di algoritmi avanzati di analisi e diagnosi combustione in tempo reale per motori endotermici alternativi

Increasingly stringent exhaust emission limits and higher fuel economy are the main drivers of the engine development process. As a consequence, the complexity of the propulsion units and its subsystems increase, due to the extensive use of sensors and actuators needed to obtain a precise control over the combustion phase. Since engine calibration process consumes most of the development time, new tools and methodologies are needed to shorten the development time and increase the performance attainable. Real time combustion analysis, based on the in-cylinder pressure signal, can significantly improve the calibration of the engine control strategies and the development of new algorithms, giving instantaneous feedback on the engine behavior. A complete combustion analysis and diagnosis system has been developed, capable of evaluating the most important indicators about the combustion process, such as indicated mean effective pressure, heat release, mass fraction burned and knock indexes. Such a tool is built on top of a flexible, modular and affordable hardware platform, capable of satisfying the requirements needed for accuracy and precision, but also enabling the use directly on-board the vehicle, due to its small form factor.