La caratterizzazione endofenotipica del rimuginio

Rumination, defined as the tendency to think about the negative affect evoked by stressful events, has been identified as potentially playing a role in the development of cardiovascular diseases. Specifically, recent studies suggest that ruminative thoughts might be mediators of the prolonged physiological effects of stress. The main goal of this research was to study the effect of rumination, evoked in the laboratory, during the subsequent 24 hours. As rumination has been associated with the activity of several physiological systems, including the cardiovascular, endocrine, and immune system, we also aimed at studying the process from a psychoneuroendocrine point of view. Levels of anxiety, depression, anger, hostility, and trait rumination were assessed by the use of validated questionnaires. Impedance cardiography-derived measures, skin conductance, respiration, and beat-to-beat blood pressure (BP) were monitored continuously in 60 subjects during baseline, the Anger Recall Inteview, a reading task and two recovery periods. Half of the sample was randomly assigned to a distracter condition after the Anger Recall Inteview. Cortisol, plasma concentrations of epinephrine, norepinephrine, and inflammatory biomarkers (CRP, sICAM-1) were also obtained at baseline and at the end of the session. Then, all subjects were asked to wear an ambulatory BP monitor for 24 hours. Results show that the distracter was effective in stopping rumination in the laboratory but did not have a long-lasting effect in the subsequent 24 hours. Rumination was associated with prolonged sympathetic activity, vagal withdrawal, cortisol secrection, pro-inflammatory reaction and mood impairment compared to the reading task. After controlling for age and body mass index, rumination also proved to be a strong predictor of daily moods, and ambulatory HR and BP. Personality traits did not have an effect in determining the frequency or duration of daily rumination. Findings suggest that perseverative cognition can prolong stress- related affective and physiological activation and might act directly on somatic disease via the cardiovascular, immune, endocrine, and neurovisceral systems.

Caratterizzazione biomolecolare di listeria monocytogenes in suini regolarmente macellati

Listeria monocytogenes è un batterio patogeno responsabile di una malattia potenzialmente molto grave per l’uomo. L’infezione avviene soprattutto tramite l’ingestione di alimenti di origine animale contaminati, e può propagarsi per via transplacentare al feto. Il potenziale patogeno di L. monocytogenes è dovuto soprattutto a caratteristici fattori di virulenza con i quali alcuni ceppi sono in grado di attaccare la cellula dell’organismo ospite potendo aderire, invadere, moltiplicare e propagare alle cellule adiacenti. Il presente studio è rivolto al rilevamento tramite reazione polimerasica a catena (PCR) di alcuni fattori di virulenza di ceppi di L. monocytogenes isolati da campioni prelevati presso macelli suini, mediante l’identificazione dei geni responsabili della sintesi delle proteine di superficie che intervengono nel processo patogenetico, allo scopo di valutare la potenziale pericolosità di quelli isolati sia sulle carcasse, sia dal contenuto intestinale.

Alterazioni dell'immunità umorale nei pazienti con sarcoma di Kaposi classico: caratterizzazione dei linfociti B circolanti e delle loro sottopopolazioni

Objectives: Human Herpesvirus 8 (HHV-8) is the etiological agent of Kaposi’s Sarcoma (KS) and it is also associated with two B cell lymphoproliferative diseases: primary effusion lymphoma (PEL), and the plasmablastic form of multicentric Castelman’s disease (MCD). HHV-8 establishes persistent infection in the host with tropism for multiple cell types. In KS patients, the virus is found in tumor-spindle cells, peripheral blood monocytes, endothelial progenitor circulating cells, T and B lymphocytes. Peripheral B cells represent one of the major virus reservoir, but the consequences of HHV-8 infection of these cells have been poorly characterized. Therefore, in this study the frequency, the immunophenotypic profile and the functional activity of different peripheral B cell subsets in patients with classic KS (cKS) was analysed in order to identify potential alterations of these cells. The classic variant of KS is ideal to perform such studies, as it lacks confounding factors such as HIV or EBV infection and immunosuppression. Methods: Whole-blood samples from patients with the classical form of KS (cKS) (n=62) and healthy age and sex-matched seronegative controls (HSN) (n=43) were analyzed by multiparametric flow-cytometry to determine the frequency of B cells and their subpopulations, as well as their surface expression of immunoglobulins and activation markers. Results: The frequency of circulating B cells was significantly higher in cKS patients than in controls. In particular, the analysis of the B cell subsets revealed a higher frequency of naïve B cells (CD19+CD27-), among which transitional CD19+CD38highCD5+ and pre-naïve (CD27-CD38intCD5+ ) B cells demonstrated an expansion. Memory B cells (CD19+CD27+) did not differ between the two study groups, except from a higher frequency of CD19+CD27+IgM+IgD+ B cells, the typical phenotype of marginal zone (MZ) B cells, in cKS patients. The characterization of membrane surface activation markers showed lower levels of the activation marker HLA-DR only on CD27- B cells, while CD80 and CD86 were less represented in all the the B cells from cKS patients. Moreover, B cells from cKS patients were smaller and with less granules than the ones from controls. Conclusion: Taken together, these results clearly indicate that circulating B cells are altered in patients with cKS, showing an expansion of the immature phenotypes. These B cell alterations may be due to an indirect viral effect rather than to a direct one: the cytokines expressed in the microenvironment typical of cKS may cause a faster release of immature cells from the bone marrow and a lower grade of peripheral differentiation, as already suggested for other chronic viral infections such as HIV and HCV. Further studies will be necessary to understand how these alterations contribute to the pathogenesis of KS and, eventually, to the different clinical evolution of the disease.

Materiali Politiofenici Otticamente Attivi

Much effort has been devoted in the recent years to the investigation of optically active polythiophenes characterized by the presence of a chiral moiety linked to the 3-position of the aromatic ring. In addition to their potential technological applications as materials for enantioselective electrodes and membranes, chiral poly(thiophene)s offer the possibility of studying the structural changes accompanying the transition from the disordered state by following the variation of their chiroptical properties by circular dichroism (CD). In solution of a good solvent, that kind of polythiophenes doesn’t display any optical activity arising from the presence of dissymmetric conformation of the backbone, as shown by circular dichroism (CD) spectra. When the macromolecules begin to aggregate, as it occurs e.g. by addition of a poor solvent, or lowering the solution temperature, or when the macromolecules are assembled in the solid state as thin films obtained by solution casting or spin coating, significant CD bands are observed in the spectral region related to the electronic absorptions of the aromatic polythiophene chromophore. These CD bands are indicative of a chiral macromolecule arrangement of one prevailing chirality. The synthesis of -substituted polythiophenes can be carried out starting from the corresponding -substituted mono- or oligomeric thiophenic monomers under regioselective or regiospecific conditions in order to minimize or avoid the formation of head-to-head dyads unfavourably affecting the presence of coplanar conformations of thiophene rings as a consequence of steric interactions between the side-chain substituents, both in solution and in the solid state. To this regard, non-symmetrically substituted monomers require therefore to perform the polymerization in the presence of highly demanding catalysts and reaction condition, whereas with symmetrically substituted oligothiophenic monomers containing the -substituents located far apart from the reacting sites, it is instead possible to obtain regioregular macromolecules by adopting more simple and economic polymerization methods, such as, e. g., the chemical oxidative polymerization with iron (III) trichloride. In order to verify how the polymer structure affects its optical activity, further poly-3-alkylthiophenes, substituted by an enantiomerically pure chiral alkyl group, namely poli[3,3”-di[2((S)-(+)-2-methylbutoxy)ethyl]-2,2’:5’,2”-terthiophene] (PDMBOETT), poli[3,3’di[2((S)-(+)-2-methylbutoxy)ethyl]-2,2’-bitiofene] (PDMBOEBT), poli[3,3””-didodecyl-4’,3”’-di(S)-(+)-2-methylbutyl-2,2’:5’,2”:5”,2”’:5”’,2””-quinquethiophene (PDDDMBQT) have been synthesized and characterized by instrumental techniques. The spectroscopic behaviour of thin films of poly(DDDMBQT) has been investigated in the solid state under different sample preparation procedures. It was also compared with the behaviour of polymers previously made. The experimental results are interpreted in terms of influence of the side-chain substituents on the extent of planarity of the polymeric chains and the formation of optically active chiral aggregates. In recent years conjugated block copolymers have received considerable attention. It is well known that conjugated block copolymers composed of two electronically different blocks can have morphologic and optical properties, that differ from those of their homopolymers. A recent study has also shown that the electronic properties and the supramolecular organization of one conjugated block can also be influenced by the other block. In order to study better this behavior, a new conjugated block copolymers, composed of a regioregular hydrophylic block and a regioregular hydrophobic block namely poli[3[2-(2-metossietossi)etossi]metiltiofene]-co- poli[3(1-octilossi)tiofene], has been synthesized and characterized.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Caratterizzazione delle metastasi epatiche da tumore neuroendocrino mediante ecografia con mezzo di contrasto e relazione con i dati clinici

Lo scopo dello studio è quello di valutare il comportamento all’ecografia B mode e con mezzo di contrasto delle metastasi epatiche da tumore neuroendocrino ed individuare eventuali peculiarità in base alla sede del tumore primitivo, al tipo istologico, al grado di differenziazione, al Ki 67 ed al tipo di marcatore bioumorale.

Caratterizzazione tecnica e fisiologica della Muay Thai

La Muay Thai, comunemente detta “Boxe Thailandese” è un'arte marziale che rientra nella classificazione delle attività intermittenti con entrambi i sistemi energetici reclutati, aerobico e anaerobico, è inoltre caratterizzata dal fatto che il combattimento alla distanza si alterna alla lotta, denominata “clinch”. Nonostante la popolarità della Muay Thai, in ambito mondiale, stia progressivamente aumentando così come è in aumento il numero di atleti che la praticano, le ricerche incentrate su questa arte marziale e gli studi relativi agli aggiustamenti cardiometabolici nonché alle modalità temporali con cui gli specifici gesti atletici si possono succedere nel tempo durante un match, sono ancora estremamente esigui. L’oggetto del nostro studio è stato l’analisi della struttura temporale del combattimento, tramite la Match Analysis off line (analisi visiva del combattimento), con comparazione dei dati ottenuti tra il vincitore (winner) e il perdente (loser) e la valutazione dell’andamento di alcuni importanti parametri metabolici attraverso la misurazione del lattato e della HR, durante un incontro reale di Boxe Thailandese. La sperimentazione è stata condotta su un gruppo di dieci soggetti di sesso maschile, praticanti la disciplina ad un alto livello nazionale, la cui media ± deviazione standard (DS), di età, peso e altezza è di 24,6 ±4,01 anni, 69,4 ±7 kg e 174,1 ±4,3 cm. Gli atleti sono stati sottoposti, in due diverse giornate separate da almeno tre giorni, a due test; durante una prima seduta sperimentale preliminare abbiamo determinato il massimo consumo di ossigeno (VO2max) nel corso di un test sul nastro trasportare, con concomitante stima della Soglia anaerobica (SA) e misura della massima frequenza cardiaca (HR max). In una seconda seduta sperimentale abbiamo effettuato i test di combattimento in palestra e infine abbiamo analizzato i video degli incontri attraverso la Match Analysis. Dai risultati della Match - Analysis è scaturito che i vincitori hanno eseguito un numero più elevato di azioni efficaci (p < 0,05) rispetto ai non-vincitori, grazie ad un numero maggiore di combinazioni (C ) e di attacchi singoli (A) e un numero minore di difese (D) e di tecniche inefficaci. È così emerso come il livello delle realizzazioni sia quasi esclusivamente dovuto all’efficacia della tecnica e alla tattica delle azioni. Abbiamo quindi focalizzato la nostra attenzione sul clinch e sulle azioni di attacco perché si ipotizzava che potessero essere attività dispendiose e probabilmente responsabili dell’incremento di lattato durante il combattimento, dall’ analisi dei dati però non è stata riscontrata nessuna significativa correlazione tra l’andamento dei dati metabolici e le fasi di attacco e di lotta. Dai nostri risultati emerge in maniera interessante come durante le fasi attive del combattimento si siano raggiunti alti valori di lattato ematico e di frequenza cardiaca, rispettivamente di 12,55 mmol/L e di 182,68 b/min, ben oltre la SA rilevata nel test incrementale dove la HR si posizionava a 168,2 b/min. In conclusione si evidenzia come la Boxe Thailandese sia una disciplina caratterizzata da un considerevole impegno energetico-metabolico, sia aerobico che anaerobico. La predominanza del metabolismo lattacido è dimostrata dagli elevati valori di lattato osservati nel presente studio e dalla frequenza degli attacchi (8,6 ± 3,5 sec.). Questo studio potrà essere utilizzato dagli allenatori per la predisposizione di allenamenti specifici che inducano gli adattamenti propri della Muay Thai.

Metodologia di validazione dell'affidabilità e della sicurezza dei sistemi e prodotti industriali

Il rapido progresso della tecnologia, lo sviluppo di prodotti altamente sofisticati, la forte competizione globale e l’aumento delle aspettative dei clienti hanno messo nuove pressioni sui produttori per garantire la commercializzazione di beni caratterizzati da una qualità sempre crescente. Sono gli stessi clienti che da anni si aspettano di trovare sul mercato prodotti contraddistinti da un livello estremo di affidabilità e sicurezza. Tutti siamo consapevoli della necessità per un prodotto di essere quanto più sicuro ed affidabile possibile; ma, nonostante siano passati oramai 30 anni di studi e ricerche, quando cerchiamo di quantificare ingegneristicamente queste caratteristiche riconducibili genericamente al termine qualità, oppure quando vogliamo provare a calcolare i benefici concreti che l’attenzione a questi fattori quali affidabilità e sicurezza producono su un business, allora le discordanze restano forti. E le discordanze restano evidenti anche quando si tratta di definire quali siano gli “strumenti più idonei” da utilizzare per migliorare l’affidabilità e la sicurezza di un prodotto o processo. Sebbene lo stato dell’arte internazionale proponga un numero significativo di metodologie per il miglioramento della qualità, tutte in continuo perfezionamento, tuttavia molti di questi strumenti della “Total Quality” non sono concretamente applicabili nella maggior parte delle realtà industriale da noi incontrate. La non applicabilità di queste tecniche non riguarda solo la dimensione più limitata delle aziende italiane rispetto a quelle americane e giapponesi dove sono nati e stati sviluppati questi strumenti, oppure alla poca possibilità di effettuare investimenti massicci in R&D, ma è collegata anche alla difficoltà che una azienda italiana avrebbe di sfruttare opportunamente i risultati sui propri territori e propri mercati. Questo lavoro si propone di sviluppare una metodologia semplice e organica per stimare i livelli di affidabilità e di sicurezza raggiunti dai sistemi produttivi e dai prodotti industriali. Si pone inoltre di andare al di là del semplice sviluppo di una metodologia teorica, per quanto rigorosa e completa, ma di applicare in forma integrata alcuni dei suoi strumenti a casi concreti di elevata valenza industriale. Questa metodologia come anche, più in generale, tutti gli strumenti di miglioramento di affidabilità qui presentati, interessano potenzialmente una vasta gamma di campi produttivi, ma si prestano con particolare efficacia in quei settori dove coesistono elevate produzioni e fortissime esigenze qualitative dei prodotti. Di conseguenza, per la validazione ed applicazione ci si è rivolti al settore dell’automotive, che da sempre risulta particolarmente sensibile ai problemi di miglioramento di affidabilità e sicurezza. Questa scelta ha portato a conclusioni la cui validità va al di là di valori puramente tecnici, per toccare aspetti non secondari di “spendibilità” sul mercato dei risultati ed ha investito aziende di primissimo piano sul panorama industriale italiano.

Approcci molecolari e bioinformatici volti alla caratterizzazione di Vgt1, QTL coinvolto nella regolazione dell'epoca di fioritura in Zea Mays

The genetic control of flowering time has been addressed by many quantitative trait locus (QTL) studies. A survey of the results from 29 independent studies reporting information on 441 QTLs led to the production of a QTL consensus map, which enabled the identification of 59 chromosome regions distributed on all chromosomes and shown to be frequently involved in the genetic control of flowering time and related traits. One of the major QTLs for flowering time, the Vegetative to generative transition 1 (Vgt1) locus , corresponds to an upstream (70 kb) non-coding regulatory element of ZmRap2.7, a repressor of flowering. A transposon (MITE) insertion was identified as a major allelic difference within Vgt1. One of the hypotheses is that Vgt1 might function by modifying ZmRap2.7 chromatin through an epigenetic mechanism. Therefore, the methylation state at Vgt1 was investigated using an approach that combines digestion with McrBc, an endonuclease that acts upon methylated DNA, and quantitative PCR. The analyses were performed on genomic DNA from leaves of six different maize lines at four stages of development. The results showed a trend of reduction of methylation from the first to the last stage with the exception of a short genomic region flanking the MITE insertion, which showed a constant and very dense methylation throughout leaf development and for both alleles. Preliminary results from bisulfite sequencing of a small portion of Vgt1 revealed differential methylation of a single cytosine residue between the two alleles. ZmRap2.7 expression was assayed in the four developmental stages afore mentioned for the six genotypes, in order to establish a link between methylation at Vgt1 and ZmRap2.7 transcription. To assess the role of Vgt1 as a transcriptional enhancer, two reporter vectors for stable transformation of plants have been developed.

Campionamento e determinazione di sostanze rilevanti per la valutazione della capacità ossidante dell’atmosfera e studio del loro effetto sui materiali ceramici

Carbonyl compounds are very important volatil organic compounds receiving increasing attention due to their critical role in tropospheric organic chemistry and to their effects on human health. They are first photo-oxidation stage of almost all organic compounds and originators of free radicals (OH, O3...). Therfore, continuous determination of their atmospheric concentrations is essential. Currently, field measurements are very limited mainly because of the analytical challenges posed by trace concentrations and interferences arising from atmospheric co-pollutants. Additionally, hydroxyl radical (OH) plays a central role in atmospheric chemistry processes. The measurement of atmospheric OH concentrations is essential for the comprehension of atmospheric chemical and photochemical processes. In this context, objectives of this work were: To perform a continuous survey of atmospheric concentrations of carbonyl compounds on different sites around the area of Bologna. For this purpose, an automatic instrument for the continuous measurement (one hour of time resolution) was developed and used. Additionally, the development of a complete and original analytical method was realised. To develop an original OH generation system in order to evaluate the effect of OH and the reactivity of solid and/or liquid materials of interest. This included the validation of an analytical method for the quantification of OH concentrations generated. Effect of OH on ceramic materials and reactivity of snow surface samples, involved as sink of OH in atmospheric chemistry, were evaluated.