174 resultados para Coach Ed Simonich
Resumo:
The research is focused on the origin and the structure of the European party systems in long-standing democracies and in post-communist countries. Considering the differences between the western frozen party systems and the eastern unfrozen party systems, we propose a framework of analysis based on the theoretical and conceptual linkage between genetic approach and spatial theories of competition, identified in the normative component of a cleavage. At first, we propose some operational criteria to distinguish the dimensions of competition from the dimensions of identification through the use of the manifesto project surveys. Then, through the data of an expert survey and of some recent electoral mass surveys, we empirically test a set of propositions concerning, on the one hand, the congruence between party policy positions and party-voters policy positions and, on the other hand, the level of correlation between parties positions on different issue dimensions and their placement on the left-right axis.
Resumo:
My research tells about the origins of Rome. I think that Rome became a civil community under king Tullus Hostilius who transformed a federation of villages in a city. Perhaps he retook a project of his grandfather, Hostus Hostilius. I think also that the tradition on the early Rome was elaborated by Servius Tullius’ court and his motivations must be researched in the relations between this king and Tarquin’s dynasty. Finally I formulated some particular theories on the comitia centuriata and their evolution and on the international politic of Servius Tullius.
Resumo:
La tesi di dottorato riguarda il principio del legittimo affidamento nell'esperienza fiscale italiana, tedesca ed europea. La tesi è articolata in tre distinte parti. La prima muove dall’analisi della dottrina pubblicistica italiana e tedesca, con particolare attenzione all’origine e alla fonte del legittimo affidamento: il principio civilistico della buona fede ovvero quello della certezza dei rapporti giuridici. La seconda parte affronta il principio del legittimo affidamento nella disciplina fiscale ed è suddivisa in due distinte sezioni, una relativa all’ordinamento italiano, l’altra a quello tedesco. In particolare, l’attenzione è rivolta, in entrambe le sezioni, a verificare l’interrelazione del legittimo affidamento con il principio di irretroattività della legge e, quindi, l’esistenza, o meno, di un vincolo per il legislatore e con il principio di legalità per quanto concerne i rapporti con l’Amministrazione finanziaria, con particolare riferimento alla possibilità, per quest’ultima, di intervenire in malam partem, con effetti retroattivi. Lo sviluppo di questa seconda parte è stato condotto attraverso una disamina della dottrina e della giurisprudenza di merito e costituzionale che in Germania prima e in Italia dopo hanno proposto diverse ricostruzioni. La terza parte, infine, è dedicata all’analisi del legittimo affidamento nella giurisprudenza della Corte di Giustizia. In particolare, si è cercato di mettere in evidenza come l’Organo di Giustizia comunitaria abbia elaborato e interpretato il principio in esame e sia giunto ad annoverarlo nell’alveo dei principi di diritto comunitario.
Resumo:
The wheel - rail contact analysis plays a fundamental role in the multibody modeling of railway vehicles. A good contact model must provide an accurate description of the global contact phenomena (contact forces and torques, number and position of the contact points) and of the local contact phenomena (position and shape of the contact patch, stresses and displacements). The model has also to assure high numerical efficiency (in order to be implemented directly online within multibody models) and a good compatibility with commercial multibody software (Simpack Rail, Adams Rail). The wheel - rail contact problem has been discussed by several authors and many models can be found in the literature. The contact models can be subdivided into two different categories: the global models and the local (or differential) models. Currently, as regards the global models, the main approaches to the problem are the so - called rigid contact formulation and the semi – elastic contact description. The rigid approach considers the wheel and the rail as rigid bodies. The contact is imposed by means of constraint equations and the contact points are detected during the dynamic simulation by solving the nonlinear algebraic differential equations associated to the constrained multibody system. Indentation between the bodies is not permitted and the normal contact forces are calculated through the Lagrange multipliers. Finally the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces respectively. Also the semi - elastic approach considers the wheel and the rail as rigid bodies. However in this case no kinematic constraints are imposed and the indentation between the bodies is permitted. The contact points are detected by means of approximated procedures (based on look - up tables and simplifying hypotheses on the problem geometry). The normal contact forces are calculated as a function of the indentation while, as in the rigid approach, the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces. Both the described multibody approaches are computationally very efficient but their generality and accuracy turn out to be often insufficient because the physical hypotheses behind these theories are too restrictive and, in many circumstances, unverified. In order to obtain a complete description of the contact phenomena, local (or differential) contact models are needed. In other words wheel and rail have to be considered elastic bodies governed by the Navier’s equations and the contact has to be described by suitable analytical contact conditions. The contact between elastic bodies has been widely studied in literature both in the general case and in the rolling case. Many procedures based on variational inequalities, FEM techniques and convex optimization have been developed. This kind of approach assures high generality and accuracy but still needs very large computational costs and memory consumption. Due to the high computational load and memory consumption, referring to the current state of the art, the integration between multibody and differential modeling is almost absent in literature especially in the railway field. However this integration is very important because only the differential modeling allows an accurate analysis of the contact problem (in terms of contact forces and torques, position and shape of the contact patch, stresses and displacements) while the multibody modeling is the standard in the study of the railway dynamics. In this thesis some innovative wheel – rail contact models developed during the Ph. D. activity will be described. Concerning the global models, two new models belonging to the semi – elastic approach will be presented; the models satisfy the following specifics: 1) the models have to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the models have to consider generic railway tracks and generic wheel and rail profiles 3) the models have to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the models have to evaluate the number and the position of the contact points and, for each point, the contact forces and torques 4) the models have to be implementable directly online within the multibody models without look - up tables 5) the models have to assure computation times comparable with those of commercial multibody software (Simpack Rail, Adams Rail) and compatible with RT and HIL applications 6) the models have to be compatible with commercial multibody software (Simpack Rail, Adams Rail). The most innovative aspect of the new global contact models regards the detection of the contact points. In particular both the models aim to reduce the algebraic problem dimension by means of suitable analytical techniques. This kind of reduction allows to obtain an high numerical efficiency that makes possible the online implementation of the new procedure and the achievement of performance comparable with those of commercial multibody software. At the same time the analytical approach assures high accuracy and generality. Concerning the local (or differential) contact models, one new model satisfying the following specifics will be presented: 1) the model has to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the model has to consider generic railway tracks and generic wheel and rail profiles 3) the model has to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the model has to able to calculate both the global contact variables (contact forces and torques) and the local contact variables (position and shape of the contact patch, stresses and displacements) 4) the model has to be implementable directly online within the multibody models 5) the model has to assure high numerical efficiency and a reduced memory consumption in order to achieve a good integration between multibody and differential modeling (the base for the local contact models) 6) the model has to be compatible with commercial multibody software (Simpack Rail, Adams Rail). In this case the most innovative aspects of the new local contact model regard the contact modeling (by means of suitable analytical conditions) and the implementation of the numerical algorithms needed to solve the discrete problem arising from the discretization of the original continuum problem. Moreover, during the development of the local model, the achievement of a good compromise between accuracy and efficiency turned out to be very important to obtain a good integration between multibody and differential modeling. At this point the contact models has been inserted within a 3D multibody model of a railway vehicle to obtain a complete model of the wagon. The railway vehicle chosen as benchmark is the Manchester Wagon the physical and geometrical characteristics of which are easily available in the literature. The model of the whole railway vehicle (multibody model and contact model) has been implemented in the Matlab/Simulink environment. The multibody model has been implemented in SimMechanics, a Matlab toolbox specifically designed for multibody dynamics, while, as regards the contact models, the CS – functions have been used; this particular Matlab architecture allows to efficiently connect the Matlab/Simulink and the C/C++ environment. The 3D multibody model of the same vehicle (this time equipped with a standard contact model based on the semi - elastic approach) has been then implemented also in Simpack Rail, a commercial multibody software for railway vehicles widely tested and validated. Finally numerical simulations of the vehicle dynamics have been carried out on many different railway tracks with the aim of evaluating the performances of the whole model. The comparison between the results obtained by the Matlab/ Simulink model and those obtained by the Simpack Rail model has allowed an accurate and reliable validation of the new contact models. In conclusion to this brief introduction to my Ph. D. thesis, we would like to thank Trenitalia and the Regione Toscana for the support provided during all the Ph. D. activity. Moreover we would also like to thank the INTEC GmbH, the society the develops the software Simpack Rail, with which we are currently working together to develop innovative toolboxes specifically designed for the wheel rail contact analysis.
Manipolazione del metabolismo degli xenobiotici da frutta convenzionale ed attività chemiopreventiva
Resumo:
A reduced cancer risk associated with fruit and vegetable phytochemicals initially dictated chemopreventive approaches focused on specific green variety consumption or even single nutrient supplementations. However, these strategies not only failed to provide any health benefits but gave rise to detrimental effects. In parallel, public-health chemoprevention programmes were developed in the USA and Europe to increase whole vegetable consumption. Among these, the National Cancer Institute (NCI) sponsored plan “5 to 9 a day for a better health” was one of the most popular. This campaign promoted wide food choice through the consumption of at least 5 to 9 servings a day of colourful fruits and vegetables. In this study the effects of the diet suggested by NCI on transcription, translation and catalytic activity of both xenobiotic metabolizing (XME) and antioxidant enzymes were studied in the animal model. In fact, the boost of both antioxidant defences and “good” phase-II together with down-regulation of “bad” phase-I XMEs is still considered one of the most widely-used strategies of cancer control. Six male Sprague Dawley rats for each treatment group were used. According to the Italian Society of Human Nutrition, a serving of fruit, vegetables and leafy greens corresponds to 150, 250 and 50 g, respectively, in a 70 kg man. Proportionally, rats received one or five servings of lyophilized onion, tomato, peach, black grape or lettuce – for white, red, yellow, violet or green diet, respectively - or five servings of each green (“5 a day” diet) by oral gavage daily for 10 consecutive days. Liver subcellular fractions were tested for various cytochrome P450 (CYP) linked-monooxygenases, phase-II supported XMEs such as glutathione S-transferase (GST) and UDP-glucuronosyl transferase (UDPGT) as well as for some antioxidant enzymes. Hepatic transcriptional and translational effects were evaluated by reverse transcription-polymerase chain reaction (RT-PCR) and Western blot analysis, respectively. dROMs test was used to measure plasmatic oxidative stress. Routine haematochemical parameters were also monitored. While the five servings administration didn’t significantly vary XME catalytic activity, the lower dose caused a complex pattern of CYP inactivation with lettuce exerting particularly strong effects (a loss of up to 43% and 45% for CYP content and CYP2B1/2-linked XME, respectively; P<0.01). “5 a day” supplementation produced the most pronounced modulations (a loss of up to 60% for CYP2E1-linked XME and a reduction of CYP content of 54%; P<0.01). Testosterone hydroxylase activity confirmed these results. RT-PCR and Western blot analysis revealed that the “5 a day” diet XMEs inactivations were a result of both a transcriptional and a translational effect while lettuce didn’t exert such effects. All administrations brought out none or fewer modulation of phase-II supported XMEs. Apart from “5 a day” supplementation and the single serving of lettuce, which strongly induced DT- diaphorase (an increase of up to 141 and 171%, respectively; P<0.01), antioxidant enzymes were not significantly changed. RT-PCR analysis confirmed DT-diaphorase induction brought about by the administration of both “5 a day” diet and a single serving of lettuce. Furthermore, it unmasked a similar result for heme-oxygenase. dROMs test provided insight into a condition of high systemic oxidative stress as a consequence of animal diet supplementation with “5 a day” diet and a single serving of lettuce (an increase of up to 600% and 900%, respectively; P<0.01). Haematochemical parameters were mildly affected by such dietary manipulations. According to the classical chemopreventive theory, these results could be of particular relevance. In fact, even if antioxidant enzymes were only mildly affected, the phase-I inactivating ability of these vegetables would be a worthy strategy to cancer control. However, the recorded systemic considerable amount of reactive oxygen species and the complexity of these enzymes and their functions suggest caution in the widespread use of vegan/vegetarian diets as human chemopreventive strategies. In fact, recent literature rather suggests that only diets rich in fruits and vegetables and poor in certain types of fat, together with moderate caloric intake, could be associated with reduced cancer risk.
Resumo:
The research explores the mechanisms in the formation and consolidation of a new regime which combines democratic and authoritarian features; it has emerged as result of democratization processes affecting different world areas in recent years. The study analyses a case of great international significance, post-communist Russia: here internal factors strongly prevail in front of the external variables of democratic imitation and contagion, thus showing to what extent Russia differs from other political contexts. The study intends to examine the strategies used by this regime to solve internal conflicts and become stable in spite of the democratizing pressures coming from outside. Indeed, the literature about political transformations has shown the problems in analyzing these polities together with the need to examine their peculiarities more in depth. In this perspective, the first section focuses on the dynamics of State-building in Russia as a fundamental process in tracing the specific characteristics of the current regime: particularly, it is suggested that the State dimension comes out as crucial in determining the level of political and social pluralism accepted in post-Soviet Russia. This argument is worked out in the second section, which analyses the main mechanisms used by the incumbents to limit and control pluralism within the two arenas of political competition and civil society, from where the major threats to the status quo are supposed to come. The main hypothesis is that the leadership interventions in these spheres during the last ten years have shaped a regime which can be characterized as a new type of authoritarianism: with respect to traditional authoritarian forms a certain degree of political contestation is accepted, visible in the presence of a multiparty system, semi-competitive elections and of the several representatives of civil society. Yet, this diversity is curbed basically in two different ways: from one hand the incumbents provide support to political and social actors who sponsor government politics (see the party of power and pro-Kremlin movements). From the other they use some non coercive forms of control and restriction (in legislation, in political elections) against those actors who promote values and priorities opposed to the official ones.
Resumo:
The thesis main topic is the conflict between disclosure in financial markets and the need for confidentiality of the firm. After a recognition of the major dynamics of information production and dissemination in the stock market, the analysis moves to the interactions between the information that a firm is tipically interested in keeping confidential, such as trade secrets or the data usually covered by patent protection, and the countervailing demand for disclosure arising from finacial markets. The analysis demonstrates that despite the seeming divergence between informational contents tipically disclosed to investors and information usually covered by intellectual property protection, the overlapping areas are nonetheless wide and the conflict between transparency in financial markets and the firm’s need for confidentiality arises frequently and sistematically. Indeed, the company’s disclosure policy is based on a continuous trade-off between the costs and the benefits related to the public dissemination of information. Such costs are mainly represented by the competitive harm caused by competitors’ access to sensitive data, while the benefits mainly refer to the lower cost of capital that the firm obtains as a consequence of more disclosure. Secrecy shields the value of costly produced information against third parties’ free riding and constitutes therefore a means to protect the firm’s incentives toward the production of new information and especially toward technological and business innovation. Excessively demanding standards of transparency in financial markets might hinder such set of incentives and thus jeopardize the dynamics of innovation production. Within Italian securities regulation, there are two sets of rules mostly relevant with respect to such an issue: the first one is the rule that mandates issuers to promptly disclose all price-sensitive information to the market on an ongoing basis; the second one is the duty to disclose in the prospectus all the information “necessary to enable investors to make an informed assessment” of the issuers’ financial and economic perspectives. Both rules impose high disclosure standards and have potentially unlimited scope. Yet, they have safe harbours aimed at protecting the issuer need for confidentiality. Despite the structural incompatibility between public dissemination of information and the firm’s need to keep certain data confidential, there are certain ways to convey information to the market while preserving at the same time the firm’s need for confidentality. Such means are insider trading and selective disclosure: both are based on mechanics whereby the process of price reaction to the new information takes place without any corresponding activity of public release of data. Therefore, they offer a solution to the conflict between disclosure and the need for confidentiality that enhances market efficiency and preserves at the same time the private set of incentives toward innovation.