Importanza prognostica delle citochine e loro ruolo nell'immunomodulazione: risultati di studi sperimentali in vivo e in vitro

Citokines are proteins produced by several cell types and secreted in response to various stimuli. These molecules are able to modify the behaviour of other cells inducing activities like growth, differentiation and apoptosis. In the last years, veterinary scientists have investigated the role played by these factors; in fact, cytokines can act as intercellular communicative signals in immune response, cell damage repair and hematopoiesis. Up to date, various cytokines have been identified and in depth comprehension of their effects in physiology, pathology and therapy is an interesting field of research. This thesis aims to understand the role played by these mediators during natural or experimentally induced pathologies. In particular, it has been evaluated the genic and protein expressions of a large number of cytokines during several diseases and starting from different matrix. Considering the heterogeneity of materials used in experimentations, multiple methods and protocols of nucleic acids and proteins extractions have been standardized. Results on cytokines expression obtained from various in vitro and in vivo experimental studies have shown how important these mediators are in regulation and modulation of the host immune response also in veterinary medicine. In particular, the analysis of inflammatory and septic markers, like cytokines, has allowed a better understanding in the pathogenesis during horse Recurrent Airway Obstruction, foal sepsis, Bovine Viral Diarrhea Virus infection and dog Parvovirus infection and the effects of these agents on the host immune system. As experimentations with mice have shown, some pathologies of the respiratory and nervous system can be reduced or even erased by blocking cytokines inflammatory production. The in vitro cytokines expression evaluation in cells which are in vivo involved in the response to exogenous (like pathogens) or endogenous (as it happens during autoimmune diseases) inflammatory stimuli could represent a model for studying citokines effects during the host immune response. This has been analyzed using lymphocytes cultured with several St. aureus strains isolated from bovine mastitic milk and different colostrum products. In the first experiment different cytokines were expressed depending on enterotoxins produced, justifying a different behaviour of the microrganism in the mammal gland. In the second one, bone marrow cells derived incubated with murine lymphocytes with colostrum products have shown various cluster of differentiation expression , different proliferation and a modified cytokines profile. A better understanding of cytokine expression mechanisms will increase the know-how on immune response activated by several pathogen agents. In particular, blocking the cytokine production, the inhibition or catalyzation of the receptor binding mechanism and the modulation of signal transduction mechanism will represent a novel therapeutic strategy in veterinary medicine.

Le Antichità di Bologna di Bartolomeo della Pugliola

For a long time, the work of a Franciscan Friar who had lived in Bologna and in Florence during the 13th and 14th centuries, Bartolomeo Della Pugliola, was thought to have been lost. Recent paleographic research, however, has affirmed that most of Della Pugliola’s work, although mixed into other authors, is contained in two manuscripts (1994 and 3843), currently kept at University Library in Bologna. Pugliola’s chronicle is central to Bolognese medieval literature, not only because it was the privileged source for the important work of Ramponis’ chronicle, but also because Bartolomeo della Pugliola’s sources are several significant works such as Jacopo Bianchetti’s lost writings and Pietro and Floriano Villolas’ chronicle (1163-1372). Ongoing historical studies and recent discoveries enabled me to reconstruct the historical chronology of Pugliola’s work as well as the Bolognese language between the 13th and 14th century The original purpose of my research was to add a linguistic commentary to the edition of the text in order to fill the gaps in medieval Bolognese language studies. In addition to being a reliable source, Pugliola’s chronicle was widely disseminated and became a sort of vulgate. The tradition of chronicle, through collation, allows the study of the language from a diachronic point of view. I therefore described all the linguistics phenomena related to phonetics, morphology and syntax in Pugliola’s text and I compared these results with variants in Villola’s and Ramponis’ chronicles. I also did likewise with another chronicle by a 16th century merchant, Friano Ubaldini, that I edited. This supplement helped to complete the Bolognese language outline from the 13th to the 16th century. In order to analize the data that I collected, I tried to approach them from a sociolinguistic point of view because each author represents a different variant of the language: closer to a scripta and the Florentine the language used by Pugliola, closer to the dialect spoken in Bologna the language used by Ubaldini. Differencies in handwriting especially show the models the authors try to reproduce or imitate. The glossary I added at the end of this study can help to understand these nuances with a number of examples.

Sviluppo di metodologie di localizzazione nel contesto del Comprehensive Nuclear Test-Ban Treaty

Since the first underground nuclear explosion, carried out in 1958, the analysis of seismic signals generated by these sources has allowed seismologists to refine the travel times of seismic waves through the Earth and to verify the accuracy of the location algorithms (the ground truth for these sources was often known). Long international negotiates have been devoted to limit the proliferation and testing of nuclear weapons. In particular the Treaty for the comprehensive nuclear test ban (CTBT), was opened to signatures in 1996, though, even if it has been signed by 178 States, has not yet entered into force, The Treaty underlines the fundamental role of the seismological observations to verify its compliance, by detecting and locating seismic events, and identifying the nature of their sources. A precise definition of the hypocentral parameters represents the first step to discriminate whether a given seismic event is natural or not. In case that a specific event is retained suspicious by the majority of the State Parties, the Treaty contains provisions for conducting an on-site inspection (OSI) in the area surrounding the epicenter of the event, located through the International Monitoring System (IMS) of the CTBT Organization. An OSI is supposed to include the use of passive seismic techniques in the area of the suspected clandestine underground nuclear test. In fact, high quality seismological systems are thought to be capable to detect and locate very weak aftershocks triggered by underground nuclear explosions in the first days or weeks following the test. This PhD thesis deals with the development of two different seismic location techniques: the first one, known as the double difference joint hypocenter determination (DDJHD) technique, is aimed at locating closely spaced events at a global scale. The locations obtained by this method are characterized by a high relative accuracy, although the absolute location of the whole cluster remains uncertain. We eliminate this problem introducing a priori information: the known location of a selected event. The second technique concerns the reliable estimates of back azimuth and apparent velocity of seismic waves from local events of very low magnitude recorded by a trypartite array at a very local scale. For the two above-mentioned techniques, we have used the crosscorrelation technique among digital waveforms in order to minimize the errors linked with incorrect phase picking. The cross-correlation method relies on the similarity between waveforms of a pair of events at the same station, at the global scale, and on the similarity between waveforms of the same event at two different sensors of the try-partite array, at the local scale. After preliminary tests on the reliability of our location techniques based on simulations, we have applied both methodologies to real seismic events. The DDJHD technique has been applied to a seismic sequence occurred in the Turkey-Iran border region, using the data recorded by the IMS. At the beginning, the algorithm was applied to the differences among the original arrival times of the P phases, so the cross-correlation was not used. We have obtained that the relevant geometrical spreading, noticeable in the standard locations (namely the locations produced by the analysts of the International Data Center (IDC) of the CTBT Organization, assumed as our reference), has been considerably reduced by the application of our technique. This is what we expected, since the methodology has been applied to a sequence of events for which we can suppose a real closeness among the hypocenters, belonging to the same seismic structure. Our results point out the main advantage of this methodology: the systematic errors affecting the arrival times have been removed or at least reduced. The introduction of the cross-correlation has not brought evident improvements to our results: the two sets of locations (without and with the application of the cross-correlation technique) are very similar to each other. This can be commented saying that the use of the crosscorrelation has not substantially improved the precision of the manual pickings. Probably the pickings reported by the IDC are good enough to make the random picking error less important than the systematic error on travel times. As a further justification for the scarce quality of the results given by the cross-correlation, it should be remarked that the events included in our data set don’t have generally a good signal to noise ratio (SNR): the selected sequence is composed of weak events ( magnitude 4 or smaller) and the signals are strongly attenuated because of the large distance between the stations and the hypocentral area. In the local scale, in addition to the cross-correlation, we have performed a signal interpolation in order to improve the time resolution. The algorithm so developed has been applied to the data collected during an experiment carried out in Israel between 1998 and 1999. The results pointed out the following relevant conclusions: a) it is necessary to correlate waveform segments corresponding to the same seismic phases; b) it is not essential to select the exact first arrivals; and c) relevant information can be also obtained from the maximum amplitude wavelet of the waveforms (particularly in bad SNR conditions). Another remarkable point of our procedure is that its application doesn’t demand a long time to process the data, and therefore the user can immediately check the results. During a field survey, such feature will make possible a quasi real-time check allowing the immediate optimization of the array geometry, if so suggested by the results at an early stage.

Analisi degli aspetti di qualità nella gestione dei sistemi di drenaggio urbano attraverso modellazione numerica e indagini di campo

In order to protect river water quality, highly affected in urban areas by continuos as intermittent immissions, it is necessary to adopt measures to intercept and treat these polluted flows. In particular during rain events, river water quality is affected by CSOs activation. Built in order to protect the sewer system and the WWTP by increased flows due to heavy rains, CSOs divert excess flows to the receiving water body. On the basis of several scientific papers, and of direct evidences as well, that demonstrate the detrimental effect of CSOs discharges, also the legislative framework moved towards a stream standard point of view. The WFD (EU/69/2000) sets new goals for receiving water quality, and groundwater as well, through an integrated immission/emissions phylosophy, in which emission limits are associated with effluent standards, based on the receiving water characteristics and their specific use. For surface waters the objective is that of a “good” ecological and chemical quality status. A surface water is defined as of good ecological quality if there is only slight departure from the biological community that would be expected in conditions of minimal anthropogenic impact. Each Member State authority is responsible for preparing and implementing a River Basin Management Plan to achieve the good ecological quality, and comply with WFD requirements. In order to cope with WFD targets, and thus to improve urban receiving water quality, a CSOs control strategy need to be implemented. Temporarily storing the overflow (or at least part of it) into tanks and treating it in the WWTP, after the end of the storm, showed good results in reducing total pollutant mass spilled into the receiving river. Italian State Authority, in order to comply with WFD statements, sets general framework, and each Region has to adopt a Water Remediation Plan (PTA, Piano Tutela Acque), setting goals, methods, and terms, to improve river water quality. Emilia Romagna PTA sets 25% reduction up to 2008, and 50% reduction up to 2015 fo total pollutants masses delivered by CSOs spills. In order to plan remediation actions, a deep insight into spills dynamics is thus of great importance. The present thesis tries to understand spills dynamics through a numerical and an experimental approach. A four months monitoring and sampling campaign was set on the Bologna sewer network, and on the Navile Channel, that is the WWTP receiving water , and that receives flows from up to 28 CSOs during rain events. On the other hand, the full model of the sewer network, was build with the commercial software InfoWorks CS. The model was either calibrated with the data from the monitoring and sampling campaign. Through further model simulations interdependencies among masses spilled, rain characteristics and basin characteristics are looked for. The thesis can be seen as a basis for further insighs and for planning remediation actions.

Studio del comportamento meccanico di smalti porcellanati per substrati metallici

Composite porcelain enamels are inorganic coatings for metallic components based on a special ceramic-vitreous matrix in which specific additives are randomly dispersed. The ceramic-vitreous matrix is made by a mixture of various raw materials and elements and in particular it is based on boron-silicate glass added with metal oxides(1) of titanium, zinc, tin, zirconia, alumina, ecc. These additions are often used to improve and enhance some important performances such as corrosion(2) and wear resistance, mechanical strength, fracture toughness and also aesthetic functions. The coating process, called enamelling, depends on the nature of the surface, but also on the kind of the used porcelain enamel. For metal sheets coatings two industrial processes are actually used: one based on a wet porcelain enamel and another based on a dry-silicone porcelain enamel. During the firing process, that is performed at about 870°C in the case of a steel substrate, the enamel raw material melts and interacts with the metal substrate so enabling the formation of a continuous varying structure. The interface domain between the substrate and the external layer is made of a complex material system where the ceramic vitreous and the metal constituents are mixed. In particular four main regions can be identified, (i) the pure metal region, (ii) the region where the metal constituents are dominant compared with the ceramic vitreous components, (iii) the region where the ceramic vitreous constituents are dominant compared with the metal ones, and the fourth region (iv) composed by the pure ceramic vitreous material. It has also to be noticed the presence of metallic dendrites that hinder the substrate and the external layer passing through the interphase region. Each region of the final composite structure plays a specific role: the metal substrate has mainly the structural function, the interphase region and the embedded dendrites guarantee the adhesion of the external vitreous layer to the substrate and the external vitreous layer is characterized by an high tribological, corrosion and thermal shock resistance. Such material, due to its internal composition, functionalization and architecture can be considered as a functionally graded composite material. The knowledge of the mechanical, tribological and chemical behavior of such composites is not well established and the research is still in progress. In particular the mechanical performances data about the composite coating are not jet established. In the present work the Residual Stresses, the Young modulus and the First Crack Failure of the composite porcelain enamel coating are studied. Due to the differences of the porcelain composite enamel and steel thermal properties the enamelled steel sheets have residual stresses: compressive residual stress acts on the coating and tensile residual stress acts on the steel sheet. The residual stresses estimation has been performed by measuring the curvature of rectangular one-side coated specimens. The Young modulus and the First Crack Failure (FCF) of the coating have been estimated by four point bending tests (3-7) monitored by means of the Acoustic Emission (AE) technique(5,6). In particular the AE information has been used to identify, during the bending tests, the displacement domain over which no coating failure occurs (Free Failure Zone, FFZ). In the FFZ domain, the Young modulus has been estimated according to ASTM D6272-02. The FCF has been calculated as the ratio between the displacement at the first crack of the coating and the coating thickness on the cracked side. The mechanical performances of the tested coated specimens have also been related and discussed to respective microstructure and surface characteristics by double entry charts.

Analisi, progettazione e valutazione dell'efficacia dello spot pubblicitario. Una semiotica per la ricerca di mercato

Il lavoro di ricerca tenta di inquadrare sotto nuove prospettive una problematica ormai classica all’interno della semiotica della pubblicità: l’analisi dello spot. I punti chiave del lavoro – e la pretesa di una certa differenza rispetto a lavori con oggetti affini – consistono sostanzialmente in tre aspetti. Innanzitutto, vi è un ritorno alle origini flochiane nella misura in cui non solo il contesto complessivo e le finalità che la ricerca si propone sono fortemente ancorati all’interno di obiettivi di marketing, ma tutto lo studio nella sua interezza nasce dal dialogo concreto tra metodologia di analisi semiotica e prassi concreta all’interno degli istituti di ricerca di mercato. La tesi non presenta quindi una collezione di analisi di testi pubblicitari condotte in modo autoriferito, quanto piuttosto di “messe alla prova” della metodologia, funzionali alla definizione di disegni di ricerca per la marketing research. Questo comporta un dialogo piuttosto stretto con metodologie affini (sociologia qualitativa e quantitativa, psicologia motivazionale, ecc.) nella convinzione che la priorità accordata all’oggetto di analisi sia sovraordinata rispetto all’ortodossia degli strumenti metodologici. In definitiva, lo spot è sempre e comunque analizzato all’interno di una prospettiva brand-centrica che ha ben in mente la semiotica della situazione di consumo rispetto alla quale lo spot agisce da leva di valorizzazione per l’acquisto. In secondo luogo, gli oggetti analizzati sono piuttosto vari e differenziati: non solo lo spot nella sua versione audiovisiva definitiva (il “girato”), ma anche storyboard, animatic, concept (di prodotto e di comunicazione). La prospettiva generativa greimasiana va a innestarsi su problematiche legate (anche) alla genesi dello spot, alla sua progettazione e riprogettazione/ottimizzazione. La tesi mostra quindi come una semiotica per le consulenze di marketing si diriga sul proprio oggetto ponendogli domande ben circoscritte e finalizzate a un obiettivo specifico, sostanzialmente derivato dal brief contenente le intenzioni comunicazionali del cliente-azienda. Infine, pur rimanendo all’interno di una teoria semiotica generativa (sostanzialmente greimasiana e post greimasiana), la ricerca adotta una prospettiva intrinsecamente multidisciplinare che se da un lato guarda a problematiche legate al marketing, al branding e alla comunicazione pubblicitaria e d’impresa tout court, dall’altro ritorna alle teorie dell’audiovisivo, mostrando affinità e differenze rispetto a forme audiovisive standard (il “film”) e a mutuazioni da nuove estetiche (la neotelevisione, il videoclip, ecc). La tesi si mostra solidamente convinta del fatto che per parlare di efficacia discorsiva sia imprescindibile approfondire le tematiche riguardanti il sincretismo espressivo e le specifiche modalità di manifestazione stilistica. In questo contesto, il lavoro si compone di quattro grandi aree tematiche. Dopo una breve introduzione sull’attualità del tema “spot” e sulla prospettiva analiticometodologica adottata (§ 1.), nel secondo capitolo si assume teoreticamente che i contenuti dello spot derivino da una specifica (e di volta in volta diversa) creolizzazione tra domini tematici derivanti dalla marca, dal prodotto (inteso tanto come concept di prodotto, quanto come prodotto già “vestito” di una confezione) e dalle tendenze socioculturali. Le tre dimensioni vengono valutate in relazione all’opposizione tra heritage, cioè continuità rispetto al passato e ai concorrenti e vision, cioè discontinuità rispetto alla propria storia comunicazionale e a quella dei concorrenti. Si esplorano inoltre altri fattori come il testimonial-endorser che, in quanto elemento già intrinsecamente foriero di elementi di valorizzazione, va a influire in modo rilevante sul complesso tematico e assiologico della pubblicità. Essendo la sezione della tesi che prende in considerazione il piano specificatamente contenutistico dello spot, questa parte diventa quindi anche l’occasione per ritornare sul modello delle assiologie del consumo di Jean-Marie Floch, approntando alcune critiche e difendendo invece un modello che – secondo la prospettiva qui esposta – contiene punti di attualità ineludibili rispetto a schematizzazioni che gli sono successive e in qualche modo debitrici. Segue una sezione (§ 3.) specificatamente dedicata allo svolgimento e dis-implicazione del sincretismo audiovisivo e quindi – specularmente alla precedente, dedicata alle forme e sostanze del contenuto – si concentra sulle dinamiche espressive. Lo spot viene quindi analizzato in quanto “forma testuale” dotata di alcune specificità, tra cui in primis la brevità. Inoltre vengono approfondite le problematiche legate all’apporto di ciascuna specifica sostanza: il rapporto tra visivo e sonoro, lo schermo e la sua multiprospetticità sempre più evidente, il “lavoro” di punteggiatura della musica, ecc. E su tutto il concetto dominante di montaggio, intrinsecamente unito a quello di ritmo. Il quarto capitolo ritorna in modo approfondito sul rapporto tra semiotica e ricerca di mercato, analizzando sia i rapporti di reciproca conoscenza (o non conoscenza), sia i nuovi spazi di intervento dell’analisi semiotica. Dopo aver argomentato contro un certo scetticismo circa l’utilità pragmatica dell’analisi semiotica, lo studio prende in esame i tradizionali modelli di valutazione e misurazione dell’efficacia pubblicitaria (pre- e post- test) cercando di semiotizzarne il portato. Ne consegue la proposta di disegni di ricerca semiotici modulari: integrabili tra loro e configurabili all’interno di progetti semio-quali-quantitativi. Dopo aver ridefinito le possibilità di un’indagine semiotica sui parametri di efficacia discorsiva, si procede con l’analisi di un caso concreto (§ 5.): dato uno spot che si è dimostrato efficace agli occhi dell’azienda committente, quali possono essere i modi per replicarne i fattori di successo? E come spiegare invece quelli di insuccesso delle campagne successive che – almeno teoricamente – erano pensate per capitalizzare l’efficacia della prima? Non si tratta quindi di una semiotica ingenuamente chiamata a “misurare” l’efficacia pubblicitaria, che evidentemente la marketing research analizza con strumenti quantitativi assodati e fondati su paradigmi di registrazione di determinati parametri sul consumatore (ricordo spontaneo e sollecitato, immagine di marca risultante nella mente di user e prospect consumer, intenzione d’acquisto stimolata). Piuttosto l’intervento qui esposto si preoccupa più funzionalmente a spiegare quali elementi espressivi, discorsivi, narrativi, siano stati responsabili (e quindi prospetticamente potranno condizionare in positivo o in negativo in futuro) la ricezione dello spot. L’analisi evidenzia come elementi apparentemente minimali, ancorati a differenti livelli di pertinenza siano in grado di determinare una notevole diversità negli effetti di senso. Si tratta quindi di un problema di mancata coerenza tra intenzioni comunicative e testo pubblicitario effettivamente realizzato. La risoluzione di tali questioni pragmatiche conduce ad approfondimenti teoricometodologici su alcuni versanti particolarmente interessanti. In primo luogo, ci si interroga sull’apporto della dimensione passionale nella costruzione dell’efficacia e nel coinvolgimento dello spettatore/consumatore. Inoltre – e qui risiede uno dei punti di maggior sintesi del lavoro di tesi – si intraprende una proficua discussione dei modelli di tipizzazione dei generi pubblicitari, intesi come forme discorsive. Si fanno quindi dialogare modelli diversi ma in qualche misura coestensivi e sovrapponibili come quelli di Jean Marie Floch, Guido Ferraro, Cosetta Saba e Chiara Giaccardi. Si perviene così alla costruzione di un nuovo modello sintetico, idealmente onnipervasivo e trasversale alle prospettive analizzate.