Infrastrutture per la mobilità, interventi di trasformazione territoriale e valorizzazione immobiliare: una proposta metodologica di approccio integrato

In una situazione caratterizzata dalla scarsità delle risorse finanziare a disposizione degli enti locali, che rende necessario il contributo dei privati alla realizzazione delle opere pubbliche, e dalla scarsità delle risorse ambientali, che impone di perseguire la sostenibilità degli interventi, la tesi si pone l’obiettivo di rendere le realizzazioni di nuove infrastrutture viarie “attive” rispetto al contesto in cui si collocano, garantendo l’impegno di tutte parti coinvolte. Si tratta di ottenere il contributo dei privati oltre che per le opere di urbanizzazione primaria, funzionali all’insediamento stesso, anche per la realizzazione di infrastrutture viarie non esclusivamente dedicate a questo, ma che sono necessarie per garantirne la sostenibilità. Tale principio, che viene anche denominato “contributo di sostenibilità”, comincia oggi a trovare un’applicazione nelle pratiche urbanistiche, sconta ancora alcune criticità, in quanto i casi sviluppati si basano spesso su considerazioni che si prestano a contenziosi tra operatori privati e pubblica amministrazione. Ponendosi come obiettivo la definizione di una metodologia di supporto alla negoziazione per la determinazione univoca e oggettiva del contributo da chiedere agli attuatori delle trasformazioni per la realizzazione di nuove infrastrutture viarie, ci si è concentrati sullo sviluppo di un metodo operativo basato sull’adozione dei modelli di simulazione del traffico a 4 stadi. La metodologia proposta è stata verificata attraverso l’applicazione ad un caso di studio, che riguarda la realizzazione di un nuovo asse viario al confine tra i comuni di Castel Maggiore ed Argelato. L’asse, indispensabile per garantire l’accessibilità alle nuove aree di trasformazione che interessano quel quadrante, permette anche di risolvere alcune criticità viabilistiche attualmente presenti. Il tema affrontato quindi è quello della determinazione del contributo che ciascuno degli utilizzatori del nuovo asse dovrà versare al fine di consentirne la realizzazione. In conclusione, si formulano alcune considerazioni sull’utilità della metodologia proposta e sulla sua applicabilità a casi analoghi.

Advanced Beamforming for Distributed and Multi-Beam Networks

Beamforming entails joint processing of multiple signals received or transmitted by an array of antennas. This thesis addresses the implementation of beamforming in two distinct systems, namely a distributed network of independent sensors, and a broad-band multi-beam satellite network. With the rising popularity of wireless sensors, scientists are taking advantage of the flexibility of these devices, which come with very low implementation costs. Simplicity, however, is intertwined with scarce power resources, which must be carefully rationed to ensure successful measurement campaigns throughout the whole duration of the application. In this scenario, distributed beamforming is a cooperative communication technique, which allows nodes in the network to emulate a virtual antenna array seeking power gains in the order of the size of the network itself, when required to deliver a common message signal to the receiver. To achieve a desired beamforming configuration, however, all nodes in the network must agree upon the same phase reference, which is challenging in a distributed set-up where all devices are independent. The first part of this thesis presents new algorithms for phase alignment, which prove to be more energy efficient than existing solutions. With the ever-growing demand for broad-band connectivity, satellite systems have the great potential to guarantee service where terrestrial systems can not penetrate. In order to satisfy the constantly increasing demand for throughput, satellites are equipped with multi-fed reflector antennas to resolve spatially separated signals. However, incrementing the number of feeds on the payload corresponds to burdening the link between the satellite and the gateway with an extensive amount of signaling, and to possibly calling for much more expensive multiple-gateway infrastructures. This thesis focuses on an on-board non-adaptive signal processing scheme denoted as Coarse Beamforming, whose objective is to reduce the communication load on the link between the ground station and space segment.

Land use management in mountainous areas: combining ground-based and EO (Earth Observation) data to investigate the shallow landsliding susceptibility in the Duron valley (Trento, Italy).

Throughout the alpine domain, shallow landslides represent a serious geologic hazard, often causing severe damages to infrastructures, private properties, natural resources and in the most catastrophic events, threatening human lives. Landslides are a major factor of landscape evolution in mountainous and hilly regions and represent a critical issue for mountainous land management, since they cause loss of pastoral lands. In several alpine contexts, shallow landsliding distribution is strictly connected to the presence and condition of vegetation on the slopes. With the aid of high-resolution satellite images, it's possible to divide automatically the mountainous territory in land cover classes, which contribute with different magnitude to the stability of the slopes. The aim of this research is to combine EO (Earth Observation) land cover maps with ground-based measurements of the land cover properties. In order to achieve this goal, a new procedure has been developed to automatically detect grass mantle degradation patterns from satellite images. Moreover, innovative surveying techniques and instruments are tested to measure in situ the shear strength of grass mantle and the geomechanical and geotechnical properties of these alpine soils. Shallow landsliding distribution is assessed with the aid of physically based models, which use the EO-based map to distribute the resistance parameters across the landscape.

Automated Analysis Methods for the Assessment of Bicycle Infrastructure and Demand

A first phase of the research activity has been related to the study of the state of art of the infrastructures for cycling, bicycle use and methods for evaluation. In this part, the candidate has studied the "bicycle system" in countries with high bicycle use and in particular in the Netherlands. Has been carried out an evaluation of the questionnaires of the survey conducted within the European project BICY on mobility in general in 13 cities of the participating countries. The questionnaire was designed, tested and implemented, and was later validated by a test in Bologna. The results were corrected with information on demographic situation and compared with official data. The cycling infrastructure analysis was conducted on the basis of information from the OpenStreetMap database. The activity consisted in programming algorithms in Python that allow to extract data from the database infrastructure for a region, to sort and filter cycling infrastructure calculating some attributes, such as the length of the arcs paths. The results obtained were compared with official data where available. The structure of the thesis is as follows: 1. Introduction: description of the state of cycling in several advanced countries, description of methods of analysis and their importance to implement appropriate policies for cycling. Supply and demand of bicycle infrastructures. 2. Survey on mobility: it gives details of the investigation developed and the method of evaluation. The results obtained are presented and compared with official data. 3. Analysis cycling infrastructure based on information from the database of OpenStreetMap: describes the methods and algorithms developed during the PhD. The results obtained by the algorithms are compared with official data. 4. Discussion: The above results are discussed and compared. In particular the cycle demand is compared with the length of cycle networks within a city. 5. Conclusions

Sparse Signal Representation of Ultrasonic Signals for Structural Health Monitoring Applications

Assessment of the integrity of structural components is of great importance for aerospace systems, land and marine transportation, civil infrastructures and other biological and mechanical applications. Guided waves (GWs) based inspections are an attractive mean for structural health monitoring. In this thesis, the study and development of techniques for GW ultrasound signal analysis and compression in the context of non-destructive testing of structures will be presented. In guided wave inspections, it is necessary to address the problem of the dispersion compensation. A signal processing approach based on frequency warping was adopted. Such operator maps the frequencies axis through a function derived by the group velocity of the test material and it is used to remove the dependence on the travelled distance from the acquired signals. Such processing strategy was fruitfully applied for impact location and damage localization tasks in composite and aluminum panels. It has been shown that, basing on this processing tool, low power embedded system for GW structural monitoring can be implemented. Finally, a new procedure based on Compressive Sensing has been developed and applied for data reduction. Such procedure has also a beneficial effect in enhancing the accuracy of structural defects localization. This algorithm uses the convolutive model of the propagation of ultrasonic guided waves which takes advantage of a sparse signal representation in the warped frequency domain. The recovery from the compressed samples is based on an alternating minimization procedure which achieves both an accurate reconstruction of the ultrasonic signal and a precise estimation of waves time of flight. Such information is used to feed hyperbolic or elliptic localization procedures, for accurate impact or damage localization.

La governance del sociosanitario in Emilia Romagna: Esperienze e prospettive

In un contesto dominato da invecchiamento della popolazione, prevalenza della cronicità e presenza crescente di pazienti multiproblematici e non autosufficienti è indispensabile spostare il baricentro delle cure dall'acuzie alla cronicità, e quindi assicurare la continuità e la coerenza fra i diversi setting di cura, sia sanitari che socio-sanitari (ospedale, servizi sanitari territoriali, domicilio, strutture residenziali di Long term care). Dall'analisi della letteratura emerge che il maggiore ostacolo a realizzare questa continuità è rappresentato dalla presenza, caratteristica del sistema di welfare italiano, di molteplici attori e strutture con competenze, obiettivi e funzioni diverse e separate, e la raccomandazione di lavorare per l'integrazione contemporaneamente su più livelli: - normativo-istituzionale - programmatorio - professionale e gestionale Il sistema della "governance" realizzato in Emilia-Romagna per l'integrazione socio-sanitaria è stato valutato alla luce di queste raccomandazioni, seguendo il modello della Realist evaluation per i Social complex interventions: enucleando le "teorie" alla base dell'intervento ed analizzando i diversi step della sua implementazione. Alla luce di questa valutazione, il modello della "governance" è risultato coerente con le indicazioni delle linee guida, ed effettivamente capace di produrre risultati al fine della continuità e della coerenza fra cure sanitarie e assistenza sociale e sanitaria complessa. Resta da realizzare una valutazione complessiva dell'impatto su efficacia, costi e soddisfazione dei pazienti.

The twofold role of Cloud Computing in Digital Forensics: target of investigations and helping hand to evidence analysis

This PhD thesis discusses the impact of Cloud Computing infrastructures on Digital Forensics in the twofold role of target of investigations and as a helping hand to investigators. The Cloud offers a cheap and almost limitless computing power and storage space for data which can be leveraged to commit either new or old crimes and host related traces. Conversely, the Cloud can help forensic examiners to find clues better and earlier than traditional analysis applications, thanks to its dramatically improved evidence processing capabilities. In both cases, a new arsenal of software tools needs to be made available. The development of this novel weaponry and its technical and legal implications from the point of view of repeatability of technical assessments is discussed throughout the following pages and constitutes the unprecedented contribution of this work

Distributed Smart City Services for Urban Ecosystems

A Smart City is a high-performance urban context, where citizens live independently and are more aware of the surrounding opportunities, thanks to forward-looking development of economy politics, governance, mobility and environment. ICT infrastructures play a key-role in this new research field being also a mean for society to allow new ideas to prosper and new, more efficient approaches to be developed. The aim of this work is to research and develop novel solutions, here called smart services, in order to solve several upcoming problems and known issues in urban areas and more in general in the modern society context. A specific focus is posed on smart governance and on privacy issues which have been arisen in the cellular age.

Modelling and analysis of networked control strategies in smart power distribution grids: development of co-simulation tools

This thesis is focused on Smart Grid applications in medium voltage distribution networks. For the development of new applications it appears useful the availability of simulation tools able to model dynamic behavior of both the power system and the communication network. Such a co-simulation environment would allow the assessment of the feasibility of using a given network technology to support communication-based Smart Grid control schemes on an existing segment of the electrical grid and to determine the range of control schemes that different communications technologies can support. For this reason, is presented a co-simulation platform that has been built by linking the Electromagnetic Transients Program Simulator (EMTP v3.0) with a Telecommunication Network Simulator (OPNET-Riverbed v18.0). The simulator is used to design and analyze a coordinate use of Distributed Energy Resources (DERs) for the voltage/var control (VVC) in distribution network. This thesis is focused control structure based on the use of phase measurement units (PMUs). In order to limit the required reinforcements of the communication infrastructures currently adopted by Distribution Network Operators (DNOs), the study is focused on leader-less MAS schemes that do not assign special coordinating rules to specific agents. Leader-less MAS are expected to produce more uniform communication traffic than centralized approaches that include a moderator agent. Moreover, leader-less MAS are expected to be less affected by limitations and constraint of some communication links. The developed co-simulator has allowed the definition of specific countermeasures against the limitations of the communication network, with particular reference to the latency and loss and information, for both the case of wired and wireless communication networks. Moreover, the co-simulation platform has bee also coupled with a mobility simulator in order to study specific countermeasures against the negative effects on the medium voltage/current distribution network caused by the concurrent connection of electric vehicles.

The use of satellite remote sensing for flood risk management

Over the last decades the impact of natural disasters to the global environment is becoming more and more severe. The number of disasters has dramatically increased, as well as the cost to the global economy and the number of people affected. Among the natural disaster, flood catastrophes are considered to be the most costly, devastating, broad extent and frequent, because of the tremendous fatalities, injuries, property damage, economic and social disruption they cause to the humankind. In the last thirty years, the World has suffered from severe flooding and the huge impact of floods has caused hundreds of thousands of deaths, destruction of infrastructures, disruption of economic activity and the loss of property for worth billions of dollars. In this context, satellite remote sensing, along with Geographic Information Systems (GIS), has become a key tool in flood risk management analysis. Remote sensing for supporting various aspects of flood risk management was investigated in the present thesis. In particular, the research focused on the use of satellite images for flood mapping and monitoring, damage assessment and risk assessment. The contribution of satellite remote sensing for the delineation of flood prone zones, the identification of damaged areas and the development of hazard maps was explored referring to selected cases of study.