Preclinical development of cancer vaccines

Triplex cell vaccine is a cancer immunopreventive cell vaccine that can prevent almost completely mammary tumor onset in HER-2/neu transgenic mice. A future translation of cancer immunoprevention from preclinical to clinical studies should take into account several aspects. The work reported in this thesis deals with the study of three of these aspects: vaccine schedule, activity in a therapeutic set-up and second-generation DNA vaccines. An important element in determining human acceptance and compliance of a treatment protocol is the number of vaccinations. In order to improve the vaccination schedule a minimal protocol was searched, i.e. a schedule consisting of a lower number of administrations than standard protocol but with a similar efficacy. A candidate optimal protocol was identified by the use of an in silico model, SimTriplex simulator. The in vivo test of this schedule in HER-2/neu transgenic mice only partially confirmed in silico predictions. This result shows that in silico models have the potential ability to aid in searching of optimal treatment protocols, provided that they will be further tuned on experimental data. As a further result this preclinical study highlighted that kinetic of antibody response plays a major role in determining cancer prevention, leading to the hypothesis of a threshold that must be reached rapidly and maintained lifetime. Early clinical trials would be performed in a therapeutic, rather than preventive, setting. Thus, the activity of Triplex vaccine was investigated against experimental lung metastases in HER-2/neu transgenic mice in order to evaluate if the immunopreventive Triplex vaccine could be effective also against a pre-existing tumor mass. This preclinical model of aggressive metastatic development showed that the vaccine was an efficient treatment also 4 for the cure of micrometastases. However the immune mechanisms activated against tumor mass were not antibody dependent, i.e. different from those preventing the onset of primary mammary carcinoma. DNA vaccines could be more easily used than cellular ones. A second generation of Triplex vaccine based on DNA plasmids was evaluated in an aggressive preclinical model (BALBp53neu female mice) and compared with the preventive ability of cellular Triplex vaccine. It was observed that Triplex DNA vaccine was as effective as Triplex cell vaccine, exploiting a more restricted immune stimulation.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Development of synthetic molecular circuits for the control of cell systems

Synthetic biology is a young field of applicative research aiming to design and build up artificial biological devices, useful for human applications. How synthetic biology emerged in past years and how the development of the Registry of Standard Biological Parts aimed to introduce one practical starting solution to apply the basics of engineering to molecular biology is presented in chapter 1 in the thesis The same chapter recalls how biological parts can make up a genetic program, the molecular cloning tecnique useful for this purpose, and an overview of the mathematical modeling adopted to describe gene circuit behavior. Although the design of gene circuits has become feasible the increasing complexity of gene networks asks for a rational approach to design gene circuits. A bottom-up approach was proposed, suggesting that the behavior of a complicated system can be predicted from the features of its parts. The option to use modular parts in large-scale networks will be facilitated by a detailed and shared characterization of their functional properties. Such a prediction, requires well-characterized mathematical models of the parts and of how they behave when assembled together. In chapter 2, the feasibility of the bottom-up approach in the design of a synthetic program in Escherichia coli bacterial cells is described. The rational design of gene networks is however far from being established. The synthetic biology approach can used the mathematical formalism to identify biological information not assessable with experimental measurements. In this context, chapter 3 describes the design of a synthetic sensor for identifying molecules of interest inside eukaryotic cells. The Registry of Standard parts collects standard and modular biological parts. To spread the use of BioBricks the iGEM competition was started. The ICM Laboratory, where Francesca Ceroni completed her Ph.D, partecipated with teams of students and Chapter 4 summarizes the projects developed.

Social aspects of organic agriculture and other multifunctional benefits - Successful EU models compared with possibilities for organic developments in Croatia

Main objective of the dissertation is to illustrate how social and educational aspects (in close interaction with other multifunctional aspects in organic agriculture) which are developed on different multifunctional organic farms in Italy and Netherlands, as well as established agricultural policy frameworks in these countries, can be compared with the situation in Croatian organics and can contribute to further developent of organic issues in the Repubic of Croatia. So, through different chapters, the dissertation describes the performance of organic agriculture sectors in Italy, Netherlands and Croatia within the national agricultural policy frameworks, it analyzes the role of national institutions and policy in Croatia in connection with Croatia's status of candidate country for enterance into EU and harmonization of legislation with the CAP, as well as analyzes what is the role of national authorities, universities, research centres, but also of private initiatives, NGOs and cooperatives in organic agriculture in Netherlands, Italy and Croatia. Its main part describes how social and educational aspects are interacting with other multifunctional aspects in organic agriculture and analyzes the benefits and contribution of multifunctional activites performed on organic farms to education, healthy nourishment, environment protection and health care. It also assess the strengths and weaknesses of organic agriculture in all researched countries. The dissertation concludes with development opportunities for multifunctional organic agriculture in Croatia, as well as giving perspectives and recommendations for different approaches on the basis of experiences learned from successful EU models accompanied with some personal ideas and proposals.

Subject-specific musculoskeletal models of the lower limbs for the prediction of skeletal loads during motion

The determination of skeletal loading conditions in vivo and their relationship to the health of bone tissues, remain an open question. Computational modeling of the musculoskeletal system is the only practicable method providing a valuable approach to muscle and joint loading analyses, although crucial shortcomings limit the translation process of computational methods into the orthopedic and neurological practice. A growing attention focused on subject-specific modeling, particularly when pathological musculoskeletal conditions need to be studied. Nevertheless, subject-specific data cannot be always collected in the research and clinical practice, and there is a lack of efficient methods and frameworks for building models and incorporating them in simulations of motion. The overall aim of the present PhD thesis was to introduce improvements to the state-of-the-art musculoskeletal modeling for the prediction of physiological muscle and joint loads during motion. A threefold goal was articulated as follows: (i) develop state-of-the art subject-specific models and analyze skeletal load predictions; (ii) analyze the sensitivity of model predictions to relevant musculotendon model parameters and kinematic uncertainties; (iii) design an efficient software framework simplifying the effort-intensive phases of subject-specific modeling pre-processing. The first goal underlined the relevance of subject-specific musculoskeletal modeling to determine physiological skeletal loads during gait, corroborating the choice of full subject-specific modeling for the analyses of pathological conditions. The second goal characterized the sensitivity of skeletal load predictions to major musculotendon parameters and kinematic uncertainties, and robust probabilistic methods were applied for methodological and clinical purposes. The last goal created an efficient software framework for subject-specific modeling and simulation, which is practical, user friendly and effort effective. Future research development aims at the implementation of more accurate models describing lower-limb joint mechanics and musculotendon paths, and the assessment of an overall scenario of the crucial model parameters affecting the skeletal load predictions through probabilistic modeling.

Nature and relevance of inherited blueprints on business models choices and innovation: an assessment

One important metaphor, referred to biological theories, used to investigate on organizational and business strategy issues is the metaphor about heredity; an area requiring further investigation is the extent to which the characteristics of blueprints inherited from the parent, helps in explaining subsequent development of the spawned ventures. In order to shed a light on the tension between inherited patterns and the new trajectory that may characterize spawned ventures’ development we propose a model aimed at investigating which blueprints elements might exert an effect on business model design choices and to which extent their persistence (or abandonment) determines subsequent business model innovation. Under the assumption that academic and corporate institutions transmit different genes to their spin-offs, we hence expect to have heterogeneity in elements that affect business model design choices and its subsequent evolution. This is the reason why we carry on a twofold analysis in the biotech (meta)industry: under a multiple-case research design, business model and especially its fundamental design elements and themes scholars individuated to decompose the construct, have been thoroughly analysed. Our purpose is to isolate the dimensions of business model that may have been the object of legacy and the ones along which an experimentation and learning process is more likely to happen, bearing in mind that differences between academic and corporate might not be that evident as expected, especially considering that business model innovation may occur.

Development of strategies for vascular damage repair in Pulmonary Arterial Hypertension

Pulmonary arterial hypertension (PAH) is a progressive and rare disease with so far unclear pathogenesis, limited treatment options and poor prognosis. Unbalance of proliferation and migration in pulmonary arterial smooth muscle cells (PASMCs) is an important hallmark of PAH. In this research Sodium butyrate (BU) has been evaluated in vitro and in vivo models of PAH. This histone deacetylase inhibitor (HDACi) counteracted platelet-derived growth factor (PDGF)-induced ki67 expression in PASMCs, and arrested cell cycle mainly at G0/G1 phases. Furthermore, BU reduced the transcription of PDGFRbeta, and that of Ednra and Ednrb, two major receptors in PAH progression. Wound healing and pulmonary artery ring assays indicated that BU inhibited PDGF-induced PASMC migration. BU strongly inhibited PDGF-induced Akt phosphorylation, an effect reversed by the phosphatase inhibitor calyculinA. In vivo, BU showed efficacy in monocrotaline-induced PAH in rats. Indeed, the HDACi reduced both thickness of distal pulmonary arteries and right ventricular hypertrophy. Besides these studies, Serial Analysis of Gene Expression (SAGE) has be used to obtain complete transcriptional profiles of peripheral blood mononuclear cells (PBMCs) isolated from PAH and Healthy subjects. SAGE allows quantitative analysis of thousands transcripts, relying on the principle that a short oligonucleotide (tag) can uniquely identify mRNA transcripts. Tag frequency reflects transcript abundance. We enrolled patients naïve for a specific PAH therapy (4 IPAH non-responder, 3 IPAH responder, 6 HeritablePAH), and 8 healthy subjects. Comparative analysis revealed that significant differential expression was only restricted to a hundred of down- or up-regulated genes. Interestingly, these genes can be clustered into functional networks, sharing a number of crucial features in cellular homeostasis and signaling. SAGE can provide affordable analysis of genes amenable for molecular dissection of PAH using PBMCs as a sentinel, surrogate tissue. Altogether, these findings may disclose novel perspectives in the use of HDACi in PAH and potential biomarkers.

Essays on the Empirical Analysis of Economic and Political Development in Sub-Saharan Africa

In Sub-Saharan Africa, non-democratic events, like civil wars and coup d'etat, destroy economic development. This study investigates both domestic and spatial effects on the likelihood of civil wars and coup d'etat. To civil wars, an increase of income growth is one of common research conclusions to stop wars. This study adds a concern on ethnic fractionalization. IV-2SLS is applied to overcome causality problem. The findings document that income growth is significant to reduce number and degree of violence in high ethnic fractionalized countries, otherwise they are trade-off. Income growth reduces amount of wars, but increases its violent level, in the countries with few large ethnic groups. Promoting growth should consider ethnic composition. This study also investigates the clustering and contagion of civil wars using spatial panel data models. Onset, incidence and end of civil conflicts spread across the network of neighboring countries while peace, the end of conflicts, diffuse only with the nearest neighbor. There is an evidence of indirect links from neighboring income growth, without too much inequality, to reduce the likelihood of civil wars. To coup d'etat, this study revisits its diffusion for both all types of coups and only successful ones. The results find an existence of both domestic and spatial determinants in different periods. Domestic income growth plays major role to reduce the likelihood of coup before cold war ends, while spatial effects do negative afterward. Results on probability to succeed coup are similar. After cold war ends, international organisations seriously promote democracy with pressure against coup d'etat, and it seems to be effective. In sum, this study indicates the role of domestic ethnic fractionalization and the spread of neighboring effects to the likelihood of non-democratic events in a country. Policy implementation should concern these factors.

Activity and mechanisms of action of novel organosulfur derivatives of the HDAC inhibitor Valproic Acid in human experimental models of non-small-cell lung cancer

Non-small-cell lung cancer (NSCLC) represents the leading cause of cancer death worldwide, and 5-year survival is about 16% for patients diagnosed with advanced lung cancer and about 70-90% when the disease is diagnosed and treated at earlier stages. Treatment of NSCLC is changed in the last years with the introduction of targeted agents, such as gefitinib and erlotinib, that have dramatically changed the natural history of NSCLC patients carrying specific mutations in the EGFR gene, or crizotinib, for patients with the EML4-ALK translocation. However, such patients represent only about 15-20% of all NSCLC patients, and for the remaining individuals conventional chemotherapy represents the standard choice yet, but response rate to thise type of treatment is only about 20%. Development of new drugs and new therapeutic approaches are so needed to improve patients outcome. In this project we aimed to analyse the antitumoral activity of two compounds with the ability to inhibit histone deacethylases (ACS 2 and ACS 33), derived from Valproic Acid and conjugated with H2S, in human cancer cell lines derived from NSCLC tissues. We showed that ACS 2 represents the more promising agent. It showed strong antitumoral and pro-apoptotic activities, by inducing membrane depolarization, cytocrome-c release and caspase 3 and 9 activation. It was able to reduce the invasive capacity of cells, through inhibition of metalloproteinases expression, and to induce a reduced chromatin condensation. This last characteristic is probably responsible for the observed high synergistic activity in combination with cisplatin. In conclusion our results highlight the potential role of the ACS 2 compound as new therapeutic option for NSCLC patients, especially in combination with cisplatin. If validated in in vivo models, this compound should be worthy for phase I clinical trials.

Development Of New Toolkits For Orbit Determination Codes For Precise Radio Tracking Experiments

This thesis describes the developments of new models and toolkits for the orbit determination codes to support and improve the precise radio tracking experiments of the Cassini-Huygens mission, an interplanetary mission to study the Saturn system. The core of the orbit determination process is the comparison between observed observables and computed observables. Disturbances in either the observed or computed observables degrades the orbit determination process. Chapter 2 describes a detailed study of the numerical errors in the Doppler observables computed by NASA's ODP and MONTE, and ESA's AMFIN. A mathematical model of the numerical noise was developed and successfully validated analyzing against the Doppler observables computed by the ODP and MONTE, with typical relative errors smaller than 10%. The numerical noise proved to be, in general, an important source of noise in the orbit determination process and, in some conditions, it may becomes the dominant noise source. Three different approaches to reduce the numerical noise were proposed. Chapter 3 describes the development of the multiarc library, which allows to perform a multi-arc orbit determination with MONTE. The library was developed during the analysis of the Cassini radio science gravity experiments of the Saturn's satellite Rhea. Chapter 4 presents the estimation of the Rhea's gravity field obtained from a joint multi-arc analysis of Cassini R1 and R4 fly-bys, describing in details the spacecraft dynamical model used, the data selection and calibration procedure, and the analysis method followed. In particular, the approach of estimating the full unconstrained quadrupole gravity field was followed, obtaining a solution statistically not compatible with the condition of hydrostatic equilibrium. The solution proved to be stable and reliable. The normalized moment of inertia is in the range 0.37-0.4 indicating that Rhea's may be almost homogeneous, or at least characterized by a small degree of differentiation.

Understanding the Combined Role of Internal and External Factors in New Service Development Process within the Professional Knowledge Intensive Business Service Firms

Our research asked the following main questions: how the characteristics of professionals service firms allow them to successfully innovate in exploiting through exploring by combining internal and external factors of innovation and how these ambidextrous organisations perceive these factors; and how do successful innovators in professional service firms use corporate entrepreneurship models in their new service development processes? With a goal to shed light on innovation in professional knowledge intensive business service firms’ (PKIBS), we concluded a qualitative analysis of ten globally acting law firms, providing business legal services. We analyse the internal and factors of innovation that are critical for PKIBS’ innovation. We suggest how these firms become ambidextrous in changing environment. Our findings show that this kind of firms has particular type of ambidexterity due to their specific characteristics. As PKIBS are very dependant on its human capital, governance structure, and the high expectations of their clients, their ambidexterity is structural, but also contextual at the same time. In addition, we suggest 3 types of corporate entrepreneurship models that international PKIBS use to enhance innovation in turbulent environments. We looked at how law firms going through turbulent environments were using corporate entrepreneurship activities as a part of their strategies to be more innovative. Using visual mapping methodology, we developed three types of innovation patterns in the law firms. We suggest that corporate entrepreneurship models depend on successful application of mainly three elements: who participates in corporate entrepreneurship initiatives; what are the formal processes that enhances these initiatives; and what are the policies applied to this type of behaviour.

The porcine animal model goes through the 3Rs: development of in vitro and ex vivo system to study vascular biology

Since the publication of the book of Russell and Burch in 1959, scientific research has never stopped improving itself with regard to the important issue of animal experimentation. The European Directive 2010/63/EU “On the protection of animals used for scientific purposes” focuses mainly on the animal welfare, fixing the Russell and Burch’s 3Rs principles as the foundations of the document. In particular, the legislator clearly states the responsibility of the scientific community to improve the number of alternative methods to animal experimentation. The swine is considered a species of relevant interest for translational research and medicine due to its biological similarities with humans. The surgical community has, in fact, recognized the swine as an excellent model replicating the human cardiovascular system. There have been several wild-type and transgenic porcine models which were produced for biomedicine and translational research. Among these, the cardiovascular ones are the most represented. The continuous involvement of the porcine animal model in the biomedical research, as the continuous advances achieved using swine in translational medicine, support the need for alternative methods to animal experimentation involving pigs. The main purpose of the present work was to develop and characterize novel porcine alternative methods for cardiovascular translational biology/medicine. The work was mainly based on two different models: the first consisted in an ex vivo culture of porcine aortic cylinders and the second consisted in an in vitro culture of porcine aortic derived progenitor cells. Both the models were properly characterized and results indicated that they could be useful to the study of vascular biology. Nevertheless, both the models aim to reduce the use of experimental animals and to refine animal based-trials. In conclusion, the present research aims to be a small, but significant, contribution to the important and necessary field of study of alternative methods to animal experimentation.

Preclinical development of anti-cancer strategies against human HER-2

HER-2 is a 185 kDa transmembrane receptor tyrosine kinase that belongs to the EGFR family. HER-2 is overexpressed in nearly 25% of human breast cancers and women with this subtype of breast cancer have a worse prognosis and frequently develop metastases. The progressive high number of HER-2-positive breast cancer patients with metastatic spread in the brain (up to half of women) has been attributed to the reduction in mortality, the effectiveness of Trastuzumab in killing metastatic cells in other organs and to its incapability to cross the blood-brain barrier. Apart from full-length-HER-2, a splice variant of HER-2 lacking exon 16 (here referred to as D16) was identified in human HER-2-positive breast cancers. Here, the contribution of HER-2 and D16 to mammary carcinogenesis was investigated in a model transgenic for both genes (F1 model). A dominant role of D16, especially in early stages of tumorigenesis, was suggested and the coexistence of heterogeneous levels of HER-2 and D16 in F1 tumors revealed the undeniable value of F1 strain as preclinical model of HER-2-positive breast cancer, closer resembling the human situation in respect to previous models. The therapeutical efficacy of anti-HER-2 agents, targeting HER-2 receptor (Trastuzumab, Lapatinib, R-LM249) or signaling effectors (Dasatinib, UO126, NVP-BKM120), was investigated in models of local or advanced HER-2-positive breast cancer. In contrast with early studies, data herein collected suggested that the presence of D16 can predict a better response to Trastuzumab and other agents targeting HER-2 receptor or Src activity. Using a multiorgan HER-2-positive metastatic model, the efficacy of NVP-BKM120 (PI3K inhibitor) in blocking the growth of brain metastases and the oncolytic ability of R-LM249 (HER-2-retargeted HSV) to reach and destroy metastatic HER-2-positive cancer cells were shown. Finally, exploiting the definition of “oncoantigen” given to HER-2, the immunopreventive activity of two vaccines on HER-2-positive mammary tumorigenesis was demonstrated.