325 resultados para sistemi precipitantiradar polarimetricodisdrometroidrometeorenubi convettive
Resumo:
La mostra è diventata un nuovo paradigma della cultura contemporanea. Sostenuta da proprie regole e da una grammatica complessa produce storie e narrazioni. La presente ricerca di dottorato si struttura come un ragionamento critico sulle strategie del display contemporaneo, tentando di dimostrare, con strumenti investigativi eterogenei, assumendo fonti eclettiche e molteplici approcci disciplinari - dall'arte contemporanea, alla critica d'arte, la museologia, la sociologia, l'architettura e gli studi curatoriali - come il display sia un modello discorsivo di produzione culturale con cui il curatore si esprime. La storia delle esposizioni del XX secolo è piena di tentativi di cambiamento del rapporto tra lo sviluppo di pratiche artistiche e la sperimentazione di un nuovo concetto di mostra. Nei tardi anni Sessanta l’ingresso, nella scena dell’arte, dell’area del concettuale, demolisce, con un azzeramento radicale, tutte le convenzioni della rappresentazione artistica del dopoguerra, ‘teatralizzando’ il medium della mostra come strumento di potere e introducendo un nuovo “stile di presentazione” dei lavori, un display ‘dematerializzato” che rovescia le classiche relazioni tra opera, artista, spazio e istituzione, tra un curatore che sparisce (Siegelaub) e un curatore super-artista (Szeemann), nel superamento del concetto tradizionale di mostra stessa, in cui il lavoro del curatore, in quanto autore creativo, assumeva una propria autonomia strutturale all’interno del sistema dell’arte. Lo studio delle radici di questo cambiamento, ossia l’emergere di due tipi di autorialità: il curatore indipendente e l’artista che produce installazioni, tra il 1968 e il 1972 (le mostre di Siegelaub e Szeemann, la mimesi delle pratiche artistiche e curatoriali di Broodthaers e la tensione tra i due ruoli generata dalla Critica Istituzionale) permette di inquadrare teoricamente il fenomeno. Uno degli obbiettivi della ricerca è stato anche affrontare la letteratura critica attraverso una revisione/costruzione storiografica sul display e la storia delle teorie e pratiche curatoriali - formalizzata in modo non sistematico all'inizio degli anni Novanta, a partire da una rilettura retrospettiva della esperienze delle neoavanguardie – assumendo materiali e metodologie provenienti, come già dichiarato, da ambiti differenti, come richiedeva la composizione sfaccettata e non fissata dell’oggetto di studio, con un atteggiamento che si può definire comparato e post-disciplinare. Il primo capitolo affronta gli anni Sessanta, con la successione sistematica dei primi episodi sperimentali attraverso tre direzioni: l’emergere e l’affermarsi del curatore come autore, la proliferazione di mostre alternative che sovvertivano il formato tradizionale e le innovazioni prodotte dagli artisti organizzatori di mostre della Critica Istituzionale. Esponendo la smaterializzazione concettuale, Seth Siegelaub, gallerista, critico e impresario del concettuale, ha realizzato una serie di mostre innovative; Harald Szeemann crea la posizione indipendente di exhibition maker a partire When attitudes become forms fino al display anarchico di Documenta V; gli artisti organizzatori di mostre della Critica Istituzionale, soprattutto Marcel Broodhthears col suo Musée d’Art Moderne, Départment des Aigles, analizzano la struttura della logica espositiva come opera d’arte. Nel secondo capitolo l’indagine si sposta verso la scena attivista e alternativa americana degli anni Ottanta: Martha Rosler, le pratiche community-based di Group Material, Border Art Workshop/Taller de Arte Fronterizo, Guerrilla Girls, ACT UP, Art Workers' Coalition che, con proposte diverse elaborano un nuovo modello educativo e/o partecipativo di mostra, che diventa anche terreno del confronto sociale. La mostra era uno svincolo cruciale tra l’arte e le opere rese accessibili al pubblico, in particolare le narrazioni, le idee, le storie attivate, attraverso un originale ragionamento sulle implicazioni sociali del ruolo del curatore che suggeriva punti di vista alternativi usando un forum istituzionale. Ogni modalità di display stabiliva relazioni nuove tra artisti, istituzioni e audience generando abitudini e rituali diversi per guardare la mostra. Il potere assegnato all’esposizione, creava contesti e situazioni da agire, che rovesciavano i metodi e i formati culturali tradizionali. Per Group Material, così come nelle reading-room di Martha Rosler, la mostra temporanea era un medium con cui si ‘postulavano’ le strutture di rappresentazione e i modelli sociali attraverso cui, regole, situazioni e luoghi erano spesso sovvertiti. Si propongono come artisti che stanno ridefinendo il ruolo della curatela (significativamente scartano la parola ‘curatori’ e si propongono come ‘organizzatori’). La situazione cambia nel 1989 con la caduta del muro di Berlino. Oltre agli sconvolgimenti geopolitici, la fine della guerra fredda e dell’ideologia, l’apertura ai flussi e gli scambi conseguenti al crollo delle frontiere, i profondi e drammatici cambiamenti politici che coinvolgono l’Europa, corrispondono al parallelo mutamento degli scenari culturali e delle pratiche espositive. Nel terzo capitolo si parte dall’analisi del rapporto tra esposizioni e Late Capitalist Museum - secondo la definizione di Rosalind Krauss - con due mostre cruciali: Le Magiciens de la Terre, alle origini del dibattito postcoloniale e attraverso il soggetto ineffabile di un’esposizione: Les Immatériaux, entrambe al Pompidou. Proseguendo nell’analisi dell’ampio corpus di saggi, articoli, approfondimenti dedicati alle grandi manifestazioni internazionali, e allo studio dell’espansione globale delle Biennali, avviene un cambiamento cruciale a partire da Documenta X del 1997: l’inclusione di lavori di natura interdisciplinare e la persistente integrazione di elementi discorsivi (100 days/100 guests). Nella maggior parte degli interventi in materia di esposizioni su scala globale oggi, quello che viene implicitamente o esplicitamente messo in discussione è il limite del concetto e della forma tradizionale di mostra. La sfida delle pratiche contemporanee è non essere più conformi alle tre unità classiche della modernità: unità di tempo, di spazio e di narrazione. L’episodio più emblematico viene quindi indagato nel terzo capitolo: la Documenta X di Catherine David, il cui merito maggiore è stato quello di dichiarare la mostra come format ormai insufficiente a rappresentare le nuove istanze contemporanee. Le quali avrebbero richiesto - altrimenti - una pluralità di modelli, di spazi e di tempi eterogenei per poter divenire un dispositivo culturale all’altezza dei tempi. La David decostruisce lo spazio museale come luogo esclusivo dell’estetico: dalla mostra laboratorio alla mostra come archivio, l’evento si svolge nel museo ma anche nella città, con sottili interventi di dissimulazione urbana, nel catalogo e nella piattaforma dei 100 giorni di dibattito. Il quarto capitolo affronta l’ultima declinazione di questa sperimentazione espositiva: il fenomeno della proliferazione delle Biennali nei processi di globalizzazione culturale. Dalla prima mostra postcoloniale, la Documenta 11 di Okwui Enwezor e il modello delle Platforms trans-disciplinari, al dissolvimento dei ruoli in uno scenario post-szeemanniano con gli esperimenti curatoriali su larga scala di Sogni e conflitti, alla 50° Biennale di Venezia. Sono analizzati diversi modelli espositivi (la mostra-arcipelago di Edouard Glissant; il display in crescita di Zone of Urgency come estetizzazione del disordine metropolitano; il format relazionale e performativo di Utopia Station; il modello del bric à brac; la “Scuola” di Manifesta 6). Alcune Biennali sono state sorprendentemente autoriflessive e hanno consentito un coinvolgimento più analitico con questa particolare forma espressiva. Qual è l'impatto sulla storia e il dibattito dei sistemi espositivi? Conclusioni: Cos’è la mostra oggi? Uno spazio sotto controllo, uno spazio del conflitto e del dissenso, un modello educativo e/o partecipativo? Una piattaforma, un dispositivo, un archivio? Uno spazio di negoziazione col mercato o uno spazio di riflessione e trasformazione? L’arte del display: ipotesi critiche, prospettive e sviluppi recenti.
Resumo:
Le Leucemie Acute Mieloidi di sottotipo FAB M4 e M5, le Leucemie Acute Linfoblastiche e le Leucemie Bifenotipiche sono frequentemente caratterizzate da traslocazioni del gene 11q23/MLL con formazione di oncogeni di fusione e produzione di oncoproteine che inducono la trasformazione neoplastica. Tali leucemie con riarrangiamenti di 11q23/MLL sono caratterizzate da prognosi infausta e scarsa responsività alle terapie convenzionali. Data la necessità di trovare terapie efficaci per le leucemie con traslocazione di MLL, in questo lavoro di ricerca sono stati progettati, caratterizzati e validati siRNA per il silenziamento genico degli oncogeni di fusione di MLL, con lo scopo di valutare il ripristino delle normali funzionalità di differenziamento cellulare e l’arresto della proliferazione neoplastica. Sono stati progettati siRNA specifici per gli oncogeni di fusione di MLL, sia per le regioni conservate nei diversi oncogeni di fusione, sia a livello del punto di fusione (breakpoint), sia per le regioni sui geni partner. I siRNA sono stati valutati su linee cellulari contenenti diverse traslocazioni del gene MLL. Il silenziamento è stato valutato sia a livello cellulare in termini di riduzione della capacità proliferativa e del numero delle cellule leucemiche, sia a livello molecolare tramite l’analisi della diminuzione dell’mRNA degli oncogeni di fusione di MLL. E’ stata valutata la diminuzione delle oncoproteine di fusione di MLL in seguito a trattamento con siRNA. E’ stata analizzata la variazione dell’espressione di geni dipendenti da MLL in seguito a trattamento con siRNA. Sono stati messi a punto modelli murini bioluminescenti di leucemie acute con traslocazioni di MLL innanzitutto per studiare il trafficking in vivo e la progressione leucemica delle leucemie acute con traslocazione di MLL. Successivamente sono stati utilizzati i modelli murini per lo studio in vivo dell’efficienza e della tossicità dei siRNA progettati e validati in vitro, valutando diversi sistemi di delivery per i siRNA in vivo.
Resumo:
In the framework of developing defect-based life models, in which breakdown is explicitly associated with partial discharge (PD)-induced damage growth from a defect, ageing tests and PD measurements were carried out in the lab on polyethylene (PE) layered specimens containing artificial cavities. PD activity was monitored continuously during aging. A quasi-deterministic series of stages can be observed in the behavior of the main PD parameters (i.e. discharge repetition rate and amplitude). Phase-resolved PD patterns at various ageing stages were reproduced by numerical simulation which is based on a physical discharge model devoid of adaptive parameters. The evolution of the simulation parameters provides insight into the physical-chemical changes taking place at the dielectric/cavity interface during the aging process. PD activity shows similar time behavior under constant cavity gas volume and constant cavity gas pressure conditions, suggesting that the variation of PD parameters may not be attributed to the variation of the gas pressure. Brownish PD byproducts, consisting of oxygen containing moieties, and degradation pits were found at the dielectric/cavity interface. It is speculated that the change of PD activity is related to the composition of the cavity gas, as well as to the properties of dielectric/cavity interface.
Resumo:
In gasoline Port Fuel Injection (PFI) and Direct Injection (GDI) internal combustion engines, the liquid fuel might be injected into a gaseous ambient in a superheated state, resulting in flash boiling of the fuel. The importance to investigate and predict such a process is due to the influence it has on the liquid fuel atomization and vaporization and thus on combustion, with direct implications on engine performances and exhaust gas emissions. The topic of the present PhD research involves the numerical analysis of the behaviour of the superheated fuel during the injection process, in high pressure injection systems like the ones equipping GDI engines. Particular emphasis is on the investigation of the effects of the fuel superheating degree on atomization dynamics and spray characteristics. The present work is a look at the flash evaporation and flash boiling modeling, from an engineering point of view, addressed to keep the complex physics involved as simple as possible, however capturing the main characteristics of a superheated fuel injection.
Resumo:
Il presente lavoro si occupa dell’analisi numerica di combustione di gas a basso potere calorifico (gas di sintesi derivanti da pirolisi di biomasse). L’analisi è stata condotta su due principali geometrie di camera di combustione. La prima è un bruciatore sperimentale da laboratorio adatto allo studio delle proprietà di combustione del singas. Esso è introdotto in camera separatamente rispetto ad una corrente d’aria comburente al fine di realizzare una combustione non-premiscelata diffusiva in presenza di swirl. La seconda geometria presa in considerazione è la camera di combustione anulare installata sulla microturbina a gas Elliott TA 80 per la quale si dispone di un modello installato al banco al fine dell’esecuzione di prove sperimentali. I principali obbiettivi conseguiti nello studio sono stati la determinazione numerica del campo di moto a freddo su entrambe le geometrie per poi realizzare simulazioni in combustione mediante l’utilizzo di diversi modelli di combustione. In particolare è stato approfondito lo studio dei modelli steady laminar flamelet ed unsteady flamelet con cui sono state esaminate le distribuzioni di temperatura e delle grandezze tipiche di combustione in camera, confrontando i risultati numerici ottenuti con altri modelli di combustione (Eddy Dissipation ed ED-FR) e con i dati sperimentali a disposizione. Di importanza fondamentale è stata l’analisi delle emissioni inquinanti, realizzata per entrambe le geometrie, che mostra l’entità di tali emissioni e la loro tipologia. Relativamente a questo punto, il maggior interesse si sposta sui risultati ottenuti numericamente nel caso della microturbina, per la quale sono a disposizione misure di emissione ottenute sperimentalmente. Sempre per questa geometria è stato inoltre eseguito il confronto fra microturbina alimentata con singas a confronto con le prestazioni emissive ottenute con il gas naturale. Nel corso dei tre anni, l’esecuzione delle simulazioni e l’analisi critica dei risultati ha suggerito alcuni limiti e semplificazioni eseguite sulle griglie di calcolo realizzate per lo studio numerico. Al fine di eliminare o limitare le semplificazioni o le inesattezze, le geometrie dei combustori e le griglie di calcolo sono state migliorate ed ottimizzate. In merito alle simulazioni realizzate sulla geometria del combustore della microturbina Elliott TA 80 è stata condotta dapprima l’analisi numerica di combustione a pieno carico per poi analizzare le prestazioni ai carichi parziali. Il tutto appoggiandosi a tecniche di simulazione RANS ed ipotizzando alimentazioni a gas naturale e singas derivato da biomasse. Nell’ultimo anno di dottorato è stato dedicato tempo all’approfondimento e allo studio della tecnica Large Eddy Simulation per testarne una applicazione alla geometria del bruciatore sperimentale di laboratorio. In tale simulazione è stato implementato l’SGS model di Smagorinsky-Lilly completo di combustione con modelli flamelet. Dai risultati sono stati estrapolati i profili di temperatura a confronto con i risultati sperimentali e con i risultati RANS. Il tutto in diverse simulazioni a diverso valore del time-step imposto. L’analisi LES, per quanto migliorabile, ha fornito risultati sufficientemente precisi lasciando per il futuro la possibilità di approfondire nuovi modelli adatti all’applicazione diretta sulla MTG.
Resumo:
Bioinformatic analysis of Group A Streptococcus (GAS) genomes aiming at the identification of new vaccine antigens, revealed the presence of a gene coding for a putative surface-associated protein, named GAS40, inducing protective antibodies in an animal model of sepsis. The aim of our study was to unravel the involvement of GAS40 in cell division processes and to identify the putative interactor. Firstly, bioinformatic analysis showed that gas40 shares homology with ezrA, a gene coding for a negative regulator of Z-ring formation during cell division process. Both scanning and transmission electron microscopy indicated morphological differences between wild-type and the GAS40 knock-out mutant strain, with the latter showing an impaired capacity to divide resulting in the formation of very long chains. Moreover, when the localization of the antigen on the bacterial surface was analyzed, we found that in bacteria grown at exponential phase GAS40 specifically localized at septum, indicating a possible role in cell division. Furthermore, by ELISA and co-sedimentation assays, we found that GAS40 is able to interact with FtsZ, a protein involved in Z-ring formation during cell division process. These data together with the co-localization of GAS40/FtsZ at bacterial septum demonstrated by by confocal microscopy, strongly support the hypothesis for a key role of GAS40 in bacterial cell division.
Resumo:
The hierarchical organisation of biological systems plays a crucial role in the pattern formation of gene expression resulting from the morphogenetic processes, where autonomous internal dynamics of cells, as well as cell-to-cell interactions through membranes, are responsible for the emergent peculiar structures of the individual phenotype. Being able to reproduce the systems dynamics at different levels of such a hierarchy might be very useful for studying such a complex phenomenon of self-organisation. The idea is to model the phenomenon in terms of a large and dynamic network of compartments, where the interplay between inter-compartment and intra-compartment events determines the emergent behaviour resulting in the formation of spatial patterns. According to these premises the thesis proposes a review of the different approaches already developed in modelling developmental biology problems, as well as the main models and infrastructures available in literature for modelling biological systems, analysing their capabilities in tackling multi-compartment / multi-level models. The thesis then introduces a practical framework, MS-BioNET, for modelling and simulating these scenarios exploiting the potential of multi-level dynamics. This is based on (i) a computational model featuring networks of compartments and an enhanced model of chemical reaction addressing molecule transfer, (ii) a logic-oriented language to flexibly specify complex simulation scenarios, and (iii) a simulation engine based on the many-species/many-channels optimised version of Gillespie’s direct method. The thesis finally proposes the adoption of the agent-based model as an approach capable of capture multi-level dynamics. To overcome the problem of parameter tuning in the model, the simulators are supplied with a module for parameter optimisation. The task is defined as an optimisation problem over the parameter space in which the objective function to be minimised is the distance between the output of the simulator and a target one. The problem is tackled with a metaheuristic algorithm. As an example of application of the MS-BioNET framework and of the agent-based model, a model of the first stages of Drosophila Melanogaster development is realised. The model goal is to generate the early spatial pattern of gap gene expression. The correctness of the models is shown comparing the simulation results with real data of gene expression with spatial and temporal resolution, acquired in free on-line sources.
Resumo:
Bacterial small regulatory RNAs (sRNAs) are posttranscriptional regulators involved in stress responses. These short non-coding transcripts are synthesised in response to a signal, and control gene expression of their regulons by modulating the translation or stability of the target mRNAs, often in concert with the RNA chaperone Hfq. Characterization of a Hfq knock out mutant in Neisseria meningitidis revealed that it has a pleiotropic phenotype, suggesting a major role for Hfq in adaptation to stresses and virulence and the presence of Hfq-dependent sRNA activity. Global gene expression analysis of regulated transcripts in the Hfq mutant revealed the presence of a regulated sRNA, incorrectly annotated as an open reading frame, which we renamed AniS. The synthesis of this novel sRNA is anaerobically induced through activation of its promoter by the FNR global regulator and through global gene expression analyses we identified at least two predicted mRNA targets of AniS. We also performed a detailed molecular analysis of the action of the sRNA NrrF,. We demonstrated that NrrF regulates succinate dehydrogenase by forming a duplex with a region of complementarity within the sdhDA region of the succinate dehydrogenase transcript, and Hfq enhances the binding of this sRNA to the identified target in the sdhCDAB mRNA; this is likely to result in rapid turnover of the transcript in vivo. In addition, in order to globally investigate other possible sRNAs of N. meningitdis we Deep-sequenced the transcriptome of this bacterium under both standard in vitro and iron-depleted conditions. This analysis revealed genes that were actively transcribed under the two conditions. We focused our attention on the transcribed non-coding regions of the genome and, along with 5’ and 3’ untranslated regions, 19 novel candidate sRNAs were identified. Further studies will be focused on the identification of the regulatory networks of these sRNAs, and their targets.
Resumo:
La Muay Thai, comunemente detta “Boxe Thailandese” è un'arte marziale che rientra nella classificazione delle attività intermittenti con entrambi i sistemi energetici reclutati, aerobico e anaerobico, è inoltre caratterizzata dal fatto che il combattimento alla distanza si alterna alla lotta, denominata “clinch”. Nonostante la popolarità della Muay Thai, in ambito mondiale, stia progressivamente aumentando così come è in aumento il numero di atleti che la praticano, le ricerche incentrate su questa arte marziale e gli studi relativi agli aggiustamenti cardiometabolici nonché alle modalità temporali con cui gli specifici gesti atletici si possono succedere nel tempo durante un match, sono ancora estremamente esigui. L’oggetto del nostro studio è stato l’analisi della struttura temporale del combattimento, tramite la Match Analysis off line (analisi visiva del combattimento), con comparazione dei dati ottenuti tra il vincitore (winner) e il perdente (loser) e la valutazione dell’andamento di alcuni importanti parametri metabolici attraverso la misurazione del lattato e della HR, durante un incontro reale di Boxe Thailandese. La sperimentazione è stata condotta su un gruppo di dieci soggetti di sesso maschile, praticanti la disciplina ad un alto livello nazionale, la cui media ± deviazione standard (DS), di età, peso e altezza è di 24,6 ±4,01 anni, 69,4 ±7 kg e 174,1 ±4,3 cm. Gli atleti sono stati sottoposti, in due diverse giornate separate da almeno tre giorni, a due test; durante una prima seduta sperimentale preliminare abbiamo determinato il massimo consumo di ossigeno (VO2max) nel corso di un test sul nastro trasportare, con concomitante stima della Soglia anaerobica (SA) e misura della massima frequenza cardiaca (HR max). In una seconda seduta sperimentale abbiamo effettuato i test di combattimento in palestra e infine abbiamo analizzato i video degli incontri attraverso la Match Analysis. Dai risultati della Match - Analysis è scaturito che i vincitori hanno eseguito un numero più elevato di azioni efficaci (p < 0,05) rispetto ai non-vincitori, grazie ad un numero maggiore di combinazioni (C ) e di attacchi singoli (A) e un numero minore di difese (D) e di tecniche inefficaci. È così emerso come il livello delle realizzazioni sia quasi esclusivamente dovuto all’efficacia della tecnica e alla tattica delle azioni. Abbiamo quindi focalizzato la nostra attenzione sul clinch e sulle azioni di attacco perché si ipotizzava che potessero essere attività dispendiose e probabilmente responsabili dell’incremento di lattato durante il combattimento, dall’ analisi dei dati però non è stata riscontrata nessuna significativa correlazione tra l’andamento dei dati metabolici e le fasi di attacco e di lotta. Dai nostri risultati emerge in maniera interessante come durante le fasi attive del combattimento si siano raggiunti alti valori di lattato ematico e di frequenza cardiaca, rispettivamente di 12,55 mmol/L e di 182,68 b/min, ben oltre la SA rilevata nel test incrementale dove la HR si posizionava a 168,2 b/min. In conclusione si evidenzia come la Boxe Thailandese sia una disciplina caratterizzata da un considerevole impegno energetico-metabolico, sia aerobico che anaerobico. La predominanza del metabolismo lattacido è dimostrata dagli elevati valori di lattato osservati nel presente studio e dalla frequenza degli attacchi (8,6 ± 3,5 sec.). Questo studio potrà essere utilizzato dagli allenatori per la predisposizione di allenamenti specifici che inducano gli adattamenti propri della Muay Thai.
Resumo:
Streptococcus pneumoniae is an important life threatening human pathogen causing agent of invasive diseases such as otitis media, pneumonia, sepsis and meningitis, but is also a common inhabitant of the respiratory tract of children and healthy adults. Likewise most streptococci, S. pneumoniae decorates its surface with adhesive pili, composed of covalently linked subunits and involved in the attachment to epithelial cells and virulence. The pneumococcal pili are encoded by two genomic regions, pilus islet 1 (PI-1), and pilus islet-2 (PI-2), which are present in about 30% and 16% of the pneumococcal strains, respectively. PI-1 exists in three clonally related variants, whereas PI-2 is highly conserved. The presence of the islets does not correlate with the serotype of the strains, but with the genotype (as determined by Multi Locus Sequence Typing). The prevalence of PI-1 and PI-2 positive strains is similar in isolates from invasive disease and carriage. To better dissect a possible association between PIs presence and disease we evaluated the distribution of the two PIs in a panel of 113 acute otitis media (AOM) clinical isolates from Israel. PI-1 was present in 30.1% (N=34) of the isolates tested, and PI-2 in 7% (N=8). We found that 50% of the PI-1 positive isolates belonged to the international clones Spain9V-3 (ST156) and Taiwan19F-14 (ST236), and that PI-2 was not present in the absence of Pl-1. In conclusion, there was no correlation between PIs presence and AOM, and, in general, the observed differences in PIs prevalence are strictly dependent upon regional differences in the distribution of the clones. Finally, in the AOM collection the prevalence of PI-1 was higher among antibiotic resistant isolates, confirming previous indications obtained by the in silico analysis of the MLST database collection. Since the pilus-1 subunits were shown to confer protection in mouse models of infection both in active and passive immunization studies, and were regarded as potential candidates for a new generation of protein-based vaccines, the functional characterization was mainly focused on S. pneumoniae pilus -1 components. The pneumococcal pilus-1 is composed of three subunits, RrgA, RrgB and RrgC, each stabilized by intra-molecular isopeptide bonds and covalently polymerized by means of inter-molecular isopeptide bonds to form an extended fibre. The pilus shaft is a multimeric structure mainly composed by the RrgB backbone subunit. The minor ancillary proteins are located at the tip and at the base of the pilus, where they have been proposed to act as the major adhesin (RrgA) and as the pilus anchor (RrgC), respectively. RrgA is protective in in vivo mouse models, and exists in two variants (clades I and II). Mapping of the sequence variability onto the RrgA structure predicted from X-ray data showed that the diversity was restricted to the “head” of the protein, which contains the putative binding domains, whereas the elongated “stalk” was mostly conserved. To investigate whether this variability could influence the adhesive capacity of RrgA and to map the regions important for binding, two full-length protein variants and three recombinant RrgA portions were tested for adhesion to lung epithelial cells and to purified extracellular matrix (ECM) components. The two RrgA variants displayed similar binding abilities, whereas none of the recombinant fragments adhered at levels comparable to those of the full-length protein, suggesting that proper folding and structural arrangement are crucial to retain protein functionality. Furthermore, the two RrgA variants were shown to be cross-reactive in vitro and cross-protective in vivo in a murine model of passive immunization. Taken together, these data indicate that the region implicated in adhesion and the functional epitopes responsible for the protective ability of RrgA may be conserved and that the considerable level of variation found within the “head” domain of RrgA may have been generated by immunologic pressure without impairing the functional integrity of the pilus.
Resumo:
Two of the main features of today complex software systems like pervasive computing systems and Internet-based applications are distribution and openness. Distribution revolves around three orthogonal dimensions: (i) distribution of control|systems are characterised by several independent computational entities and devices, each representing an autonomous and proactive locus of control; (ii) spatial distribution|entities and devices are physically distributed and connected in a global (such as the Internet) or local network; and (iii) temporal distribution|interacting system components come and go over time, and are not required to be available for interaction at the same time. Openness deals with the heterogeneity and dynamism of system components: complex computational systems are open to the integration of diverse components, heterogeneous in terms of architecture and technology, and are dynamic since they allow components to be updated, added, or removed while the system is running. The engineering of open and distributed computational systems mandates for the adoption of a software infrastructure whose underlying model and technology could provide the required level of uncoupling among system components. This is the main motivation behind current research trends in the area of coordination middleware to exploit tuple-based coordination models in the engineering of complex software systems, since they intrinsically provide coordinated components with communication uncoupling and further details in the references therein. An additional daunting challenge for tuple-based models comes from knowledge-intensive application scenarios, namely, scenarios where most of the activities are based on knowledge in some form|and where knowledge becomes the prominent means by which systems get coordinated. Handling knowledge in tuple-based systems induces problems in terms of syntax - e.g., two tuples containing the same data may not match due to differences in the tuple structure - and (mostly) of semantics|e.g., two tuples representing the same information may not match based on a dierent syntax adopted. Till now, the problem has been faced by exploiting tuple-based coordination within a middleware for knowledge intensive environments: e.g., experiments with tuple-based coordination within a Semantic Web middleware (surveys analogous approaches). However, they appear to be designed to tackle the design of coordination for specic application contexts like Semantic Web and Semantic Web Services, and they result in a rather involved extension of the tuple space model. The main goal of this thesis was to conceive a more general approach to semantic coordination. In particular, it was developed the model and technology of semantic tuple centres. It is adopted the tuple centre model as main coordination abstraction to manage system interactions. A tuple centre can be seen as a programmable tuple space, i.e. an extension of a Linda tuple space, where the behaviour of the tuple space can be programmed so as to react to interaction events. By encapsulating coordination laws within coordination media, tuple centres promote coordination uncoupling among coordinated components. Then, the tuple centre model was semantically enriched: a main design choice in this work was to try not to completely redesign the existing syntactic tuple space model, but rather provide a smooth extension that { although supporting semantic reasoning { keep the simplicity of tuple and tuple matching as easier as possible. By encapsulating the semantic representation of the domain of discourse within coordination media, semantic tuple centres promote semantic uncoupling among coordinated components. The main contributions of the thesis are: (i) the design of the semantic tuple centre model; (ii) the implementation and evaluation of the model based on an existent coordination infrastructure; (iii) a view of the application scenarios in which semantic tuple centres seem to be suitable as coordination media.
Resumo:
The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.
Resumo:
In Group B Streptococcus (GBS) three structurally distinct types of pili have been discovered as potential virulence factors and vaccine candidates. The pilus-forming proteins are assembled into high-molecular weight polymers via a transpeptidation mechanism mediated by specific class C sortases. Using a multidisciplinary approach including bioinformatics, structural and biochemical studies and in vivo mutagenesis we performed a broad characterization of GBS sortase C. The high resolution X-ray structure of the enzymes revealed that the active site, located into the β-barrel core of the enzyme, is made of the catalytic triad His157-Cys219-Arg228 and covered by a loop, known as the “lid”. We show that the catalytic triad and the predicted N- and C-terminal trans-membrane regions are required for the enzyme activity. Interestingly, by in vivo complementation mutagenesis studies we found that the deletion of the entire lid loop or mutations in specific lid key residues had no effect on catalytic activity of the enzyme. In addition, kinetic characterizations of recombinant enzymes indicate that the lid mutants can still recognize and cleave the substrate-mimicking peptide at least as well as the wild type protein.
Resumo:
The obligate intracellular pathogen Chlamydia trachomatis is a gram negative bacterium which infects epithelial cells of the reproductive tract. C. trachomatis is the leading cause of bacterial sexually transmitted disease worldwide and a vaccine against this pathogen is highly needed. Many evidences suggest that both antigen specific-Th1 cells and antibodies may be important to provide protection against Chlamydia infection. In a previous study we have identified eight new Chlamydia antigens inducing CD4-Th1 and/or antibody responses that, when combined properly, can protect mice from Chlamydia infection. However, all selected recombinant antigens, upon immunization in mice, elicited antibodies not able to neutralize Chlamydia infectivity in vitro. With the aim to improve the quality of the immune response by inducing effective neutralizing antibodies, we used a novel delivery system based on the unique capacity of E. coli Outer Membrane Vesicles (OMV) to present membrane proteins in their natural composition and conformation. We have expressed Chlamydia antigens, previously identified as vaccine candidates, in the OMV system. Among all OMV preparations, the one expressing HtrA Chlamydia antigen (OMV-HtrA), showed to be the best in terms of yield and quantity of expressed protein, was used to produce mice immune sera to be tested in neutralization assay in vitro. We observed that OMV-HtrA elicited specific antibodies able to neutralize efficiently Chlamydia infection in vitro, indicating that the presentation of the antigens in their natural conformation is crucial to induce an effective immune response. This is one of the first examples in which antibodies directed against a new Chlamydia antigen, other than MOMP (the only so far known antigen inducing neutralizing antibodies), are able to block the Chlamydia infectivity in vitro. Finally, by performing an epitope mapping study, we investigated the specificity of the antibody response induced by the recombinant HtrA and by OMV-HtrA. In particular, we identified some linear epitopes exclusively recognized by antibodies raised with the OMV-HtrA system, detecting in this manner the antigen regions likely responsible of the neutralizing effect.
Resumo:
Images of a scene, static or dynamic, are generally acquired at different epochs from different viewpoints. They potentially gather information about the whole scene and its relative motion with respect to the acquisition device. Data from different (in the spatial or temporal domain) visual sources can be fused together to provide a unique consistent representation of the whole scene, even recovering the third dimension, permitting a more complete understanding of the scene content. Moreover, the pose of the acquisition device can be achieved by estimating the relative motion parameters linking different views, thus providing localization information for automatic guidance purposes. Image registration is based on the use of pattern recognition techniques to match among corresponding parts of different views of the acquired scene. Depending on hypotheses or prior information about the sensor model, the motion model and/or the scene model, this information can be used to estimate global or local geometrical mapping functions between different images or different parts of them. These mapping functions contain relative motion parameters between the scene and the sensor(s) and can be used to integrate accordingly informations coming from the different sources to build a wider or even augmented representation of the scene. Accordingly, for their scene reconstruction and pose estimation capabilities, nowadays image registration techniques from multiple views are increasingly stirring up the interest of the scientific and industrial community. Depending on the applicative domain, accuracy, robustness, and computational payload of the algorithms represent important issues to be addressed and generally a trade-off among them has to be reached. Moreover, on-line performance is desirable in order to guarantee the direct interaction of the vision device with human actors or control systems. This thesis follows a general research approach to cope with these issues, almost independently from the scene content, under the constraint of rigid motions. This approach has been motivated by the portability to very different domains as a very desirable property to achieve. A general image registration approach suitable for on-line applications has been devised and assessed through two challenging case studies in different applicative domains. The first case study regards scene reconstruction through on-line mosaicing of optical microscopy cell images acquired with non automated equipment, while moving manually the microscope holder. By registering the images the field of view of the microscope can be widened, preserving the resolution while reconstructing the whole cell culture and permitting the microscopist to interactively explore the cell culture. In the second case study, the registration of terrestrial satellite images acquired by a camera integral with the satellite is utilized to estimate its three-dimensional orientation from visual data, for automatic guidance purposes. Critical aspects of these applications are emphasized and the choices adopted are motivated accordingly. Results are discussed in view of promising future developments.