Sviluppo, implementazione e valutazione funzionale di un nuovo modello protesico di caviglia

Total ankle arthroplasty (TAA) is still not as satisfactory as total hip and total knee arthroplasty. For the TAA to be considered a valuable alternative to ankle arthrodesis, an effective range of ankle mobility must be recovered. The disappointing clinical results of the current generation of TAA are mostly related to poor understanding of the structures guiding ankle joint mobility. A new design (BOX Ankle) has been developed, uniquely able to restore physiologic ankle mobility and a natural relationship between the implanted components and the retained ligaments. For the first time the shapes of the tibial and talar components in the sagittal plane were designed to be compatible with the demonstrated ligament isometric rotation. This resulted in an unique motion at the replaced ankle where natural sliding as well as rolling motion occurs while at the same time full conformity is maintained between the three components throughout the flexion arc. According to prior research, the design features a spherical convex tibial component, a talar component with radius of curvature in the sagittal plane longer than that of the natural talus, and a fully conforming meniscal component. After computer-based modelling and preliminary observations in several trial implantation in specimens, 126 patients were implanted in the period July 2003 – December 2008. 75 patients with at least 6 months follow-up are here reported. Mean age was 62,6 years (range 22 – 80), mean follow-up 20,2 months. The AOFAS clinical score systems were used to assess patient outcome. Radiographs at maximal dorsiflexion and maximal plantar flexion confirmed the meniscalbearing component moves anteriorly during dorsiflexion and posteriorly during plantarflexion. Frontal and lateral radiographs in the patients, show good alignment of the components, and no signs of radiolucency or loosening. The mean AOFAS score was observed to go from 41 pre-op to 74,6 at 6 month follow-up, with further improvement at the following follow-up. These early results reveal satisfactory clinical scores, with good recovery of range of motion and reduction of pain. Radiographic assessment reveals good osteointegration. All these preliminary results confirm biomechanical studies and the validity of this novel ligamentcompatible prosthesis design. Surely it will be important to re-evaluate these patients later.

Testo e memoria tra semiotica e scienze cognitive: una situazione sperimentale intorno al ricordo di un film

The research project presented in this dissertation is about text and memory. The title of the work is "Text and memory between Semiotics and Cognitive Science: an experimental setting about remembering a movie". The object of the research is the relationship between texts or "textuality" - using a more general semiotic term - and memory. The goal is to analyze the link between those semiotic artifacts that a culture defines as autonomous meaningful objects - namely texts - and the cognitive performance of memory that allows to remember them. An active dialogue between Semiotics and Cognitive Science is the theoretical paradigm in which this research is set, the major intend is to establish a productive alignment between the "theory of text" developed in Semiotics and the "theory of memory" outlined in Cognitive Science. In particular the research is an attempt to study how human subjects remember and/or misremember a film, as a specific case study; in semiotics, films are “cinematographic texts”. The research is based on the production of a corpus of data gained through the qualitative method of interviewing. After an initial screening of a fulllength feature film each participant of the experiment has been interviewed twice, according to a pre-established set of questions. The first interview immediately after the screening: the subsequent, follow-up interview three months from screening. The purpose of this design is to elicit two types of recall from the participants. In order to conduce a comparative inquiry, three films have been used in the experimental setting. Each film has been watched by thirteen subjects, that have been interviewed twice. The corpus of data is then made by seventy-eight interviews. The present dissertation displays the results of the investigation of these interviews. It is divided into six main parts. Chapter one presents a theoretical framework about the two main issues: memory and text. The issue of the memory is introduced through many recherches drown up in the field of Cognitive Science and Neuroscience. It is developed, at the same time, a possible relationship with a semiotic approach. The theoretical debate about textuality, characterizing the field of Semiotics, is examined in the same chapter. Chapter two deals with methodology, showing the process of definition of the whole method used for production of the corpus of data. The interview is explored in detail: how it is born, what are the expected results, what are the main underlying hypothesis. In Chapter three the investigation of the answers given by the spectators starts. It is examined the phenomenon of the outstanding details of the process of remembering, trying to define them in a semiotic way. Moreover there is an investigation of the most remembered scenes in the movie. Chapter four considers how the spectators deal with the whole narrative. At the same time it is examined what they think about the global meaning of the film. Chapter five is about affects. It tries to define the role of emotions in the process of comprehension and remembering. Chapter six presents a study of how the spectators account for a single scene of the movie. The complete work offers a broad perspective about the semiotic issue of textuality, using both a semiotic competence and a cognitive one. At the same time it presents a new outlook on the issue of memory, opening several direction of research.

Algorithms for network design and routing problems

In this thesis we study three combinatorial optimization problems belonging to the classes of Network Design and Vehicle Routing problems that are strongly linked in the context of the design and management of transportation networks: the Non-Bifurcated Capacitated Network Design Problem (NBP), the Period Vehicle Routing Problem (PVRP) and the Pickup and Delivery Problem with Time Windows (PDPTW). These problems are NP-hard and contain as special cases some well known difficult problems such as the Traveling Salesman Problem and the Steiner Tree Problem. Moreover, they model the core structure of many practical problems arising in logistics and telecommunications. The NBP is the problem of designing the optimum network to satisfy a given set of traffic demands. Given a set of nodes, a set of potential links and a set of point-to-point demands called commodities, the objective is to select the links to install and dimension their capacities so that all the demands can be routed between their respective endpoints, and the sum of link fixed costs and commodity routing costs is minimized. The problem is called non- bifurcated because the solution network must allow each demand to follow a single path, i.e., the flow of each demand cannot be splitted. Although this is the case in many real applications, the NBP has received significantly less attention in the literature than other capacitated network design problems that allow bifurcation. We describe an exact algorithm for the NBP that is based on solving by an integer programming solver a formulation of the problem strengthened by simple valid inequalities and four new heuristic algorithms. One of these heuristics is an adaptive memory metaheuristic, based on partial enumeration, that could be applied to a wider class of structured combinatorial optimization problems. In the PVRP a fleet of vehicles of identical capacity must be used to service a set of customers over a planning period of several days. Each customer specifies a service frequency, a set of allowable day-combinations and a quantity of product that the customer must receive every time he is visited. For example, a customer may require to be visited twice during a 5-day period imposing that these visits take place on Monday-Thursday or Monday-Friday or Tuesday-Friday. The problem consists in simultaneously assigning a day- combination to each customer and in designing the vehicle routes for each day so that each customer is visited the required number of times, the number of routes on each day does not exceed the number of vehicles available, and the total cost of the routes over the period is minimized. We also consider a tactical variant of this problem, called Tactical Planning Vehicle Routing Problem, where customers require to be visited on a specific day of the period but a penalty cost, called service cost, can be paid to postpone the visit to a later day than that required. At our knowledge all the algorithms proposed in the literature for the PVRP are heuristics. In this thesis we present for the first time an exact algorithm for the PVRP that is based on different relaxations of a set partitioning-like formulation. The effectiveness of the proposed algorithm is tested on a set of instances from the literature and on a new set of instances. Finally, the PDPTW is to service a set of transportation requests using a fleet of identical vehicles of limited capacity located at a central depot. Each request specifies a pickup location and a delivery location and requires that a given quantity of load is transported from the pickup location to the delivery location. Moreover, each location can be visited only within an associated time window. Each vehicle can perform at most one route and the problem is to satisfy all the requests using the available vehicles so that each request is serviced by a single vehicle, the load on each vehicle does not exceed the capacity, and all locations are visited according to their time window. We formulate the PDPTW as a set partitioning-like problem with additional cuts and we propose an exact algorithm based on different relaxations of the mathematical formulation and a branch-and-cut-and-price algorithm. The new algorithm is tested on two classes of problems from the literature and compared with a recent branch-and-cut-and-price algorithm from the literature.

Progetto del circuito di lubrificazione di una trattrice agricola

Today the design of hydraulic and lubrication circuits is becoming more and more important. The aim of this study is to develop a methodology for the design of the lubrication circuit of an agricultural tractor. In this paper the lubrication circuit of a continuously variable transmission is analysed. Several lines of the circuit are considered and in particular the lubrication of gears is discussed. The worst possible working condition which corresponds to the highest power dissipation for each part of the transmission is determined. The model of the lubrication circuit is developed with two different software simulations (Automation Studio & Amesim). In order to check the reliability of the simulation models and to characterise the lubrication circuit, experimental tests are performed. The comparison between the values of pressure drops obtained by the models and by the experimental test, demonstrates that it is possible to use these programs for the set up of a simple model of the lubrication circuit. The calculation of oil flows necessary for a force-fed lubrication of the gears, the simulation of the circuit by commercial software, and the validation of the circuit design allow to set up a preliminary equilibrium among the pipes and a proper flow rate distribution. Optimising the circuit design in the initial phase of the project is very important. The experimental adjustment of the circuit, which is often difficult, can be simplified; time and cost production can be reduced.

Tecniche numeriche di studio della sicurezza stradale: il caso della provincia di Bologna

La tesi dottorale in oggetto prende spunto da alcune considerazioni di base relative alla salute di una comunità. Infatti quest’ultima si fonda sulla sicurezza dell’ambiente in cui vive e sulla qualità delle relazioni tra i suoi componenti. In questo ambito la mobilità rappresenta uno degli elementi di maggior criticità, sia per la sicurezza delle persone, che per la salute pubblica, che per le conseguenze sull’ambiente che ne derivano. Negli ultimi anni la circolazione stradale è notevolmente aumentata è questo ha portato a notevoli aspetti negativi, uno dei quali è connesso agli incidenti stradali. In tale ambito viene ricordato che l’Unione Europea ha da tempo indicato come obiettivo prioritario il miglioramento della sicurezza stradale e nel 2001 ha fissato il traguardo di dimezzare entro il 2010 il numero delle vittime degli incidenti stradali. Non ultima, l’approvazione da parte del Parlamento europeo e del Consiglio di un atto legislativo (d’imminente pubblicazione sulla GU Europea) relativo alla gestione della sicurezza in tutte le fasi della pianificazione, della progettazione e del funzionamento delle infrastrutture stradali, in cui si evidenzia l’esigenza di una quantificazione della sicurezza stradale. In tale contesto viene sottolineato come uno dei maggiori problemi nella gestione della sicurezza stradale sia la mancanza di un metodo affidabile per stimare e quantificare il livello di sicurezza di una strada esistente o in progetto. Partendo da questa considerazione la tesi si sviluppa mettendo in evidenza le grandezza fondamentali nel problema della sicurezza stradale, (grado di esposizione, rischio d’incidente e le possibili conseguenze sui passeggeri) e analizzando i sistemi adottati tradizionalmente per effettuare analisi di sicurezza: • Statistiche dei dati storici d’incidente; • Previsione da modelli basati su analisi di regressione dei dati incidentali; • Studi Before-After; • Valutazione da giudizi di esperti. Dopo aver analizzato gli aspetti positivi e negativi delle alternative in parola, viene proposto un nuovo approccio, che combina gli elementi di ognuno dei metodi sopra citati in un algoritmo di previsione incidentale. Tale nuovo algoritmo, denominato Interactive Highway Safety Design Model (IHSDM) è stato sviluppato dalla Federal Highway Administration in collaborazione con la Turner Fairbank Higway Research Center ed è specifico per le strade extraurbane a due corsie. Il passo successivo nello sviluppo della tesi è quello di un’analisi dettagliata del modello IHSDM che fornisce il numero totale di incidenti previsti in un certo intervallo temporale. Viene analizzata la struttura del modello, i limiti d’applicabilità, le equazioni che ne sono alla base e i coefficienti moltiplicativi relativi ad ogni caratteristica geometrica e funzionale. Inoltre viene presentata un’ampia analisi di sensibilità che permette di definire quale sia l’influenza d’ogni singolo Fattore di Previsione incidentale (Accident Predication Factor) sul risultato finale. Dai temi trattati, emerge chiaramente come la sicurezza è legata a più sistemi tra loro interconnessi e che per utilizzare e migliorare i modelli previsionali è necessario avere a disposizione dati completi, congruenti, aggiornati e facilmente consultabili. Infatti, anche quando sono disponibili elementi su tutti gli incidenti avvenuti, spesso mancano informazioni di dettaglio ma fondamentali, riguardanti la strada come ad esempio il grado di curvatura, la larghezza della carreggiata o l’aderenza della pavimentazione. In tale ottica, nella tesi viene presentato il Sistema Informativo Stradale (SIS) della Provincia di Bologna, concepito come strumento di gestione delle problematiche inerenti la viabilità e come strumento di supporto per la pianificazione degli interventi e la programmazione delle risorse da investire sulla rete. Viene illustrato come il sistema sia in grado di acquisire, elaborare ed associare dati georeferenziati relativi al territorio sia sotto forma di rappresentazioni grafiche, sia mediante informazioni descrittive di tipo anagrafico ed alfanumerico. Quindi viene descritto il rilievo ad alto rendimento, effettuato con l’ausilio di un laboratorio mobile multifunzionale (Mobile Mapping System), grazie al quale è stato possibile definire con precisione il grafo completo delle strade provinciali e il database contenente i dati relativi al patrimonio infrastrutturale. Tali dati, relativi alle caratteristiche plano-altimetriche dell’asse (rettifili, curve planimetriche, livellette, raccordi altimetrici, ecc...), alla sezione trasversale (numero e larghezza corsie, presenza di banchine, ecc..), all’ambiente circostante e alle strutture annesse vengono presentati in forma completa specificando per ognuno la variabilità specifica. Inoltre viene evidenziato come il database si completi con i dati d’incidentali georeferenziati sul grafo e compresivi di tutte le informazioni contenute nel modello ISTAT CTT/INC spiegandone le possibili conseguenze sul campo dell’analisi di sicurezza. La tesi si conclude con l’applicazione del modello IHSDM ad un caso reale, nello specifico la SP255 di S.Matteo Decima. Infatti tale infrastruttura sarà oggetto di un miglioramento strutturale, finanziato dalla Regione Emilia Romagna, che consistente nell’allargamento della sede stradale attraverso la realizzazione di una banchina pavimentata di 1.00m su entrambi i lati della strada dalla prog. km 19+000 al km 21+200. Attraverso l’utilizzo dell’algoritmo di previsione incidentale è stato possibile quantificare gli effetti di questo miglioramento sul livello di sicurezza dell’infrastruttura e verificare l’attendibilità del modello con e senza storia incidentale pregressa. Questa applicazione ad un caso reale mette in evidenza come le informazioni del SIS possano essere sfruttate a pieno per la realizzazione di un analisi di sicurezza attraverso l’algoritmo di previsione incidentale IHSDM sia nella fase di analisi di uno specifico tronco stradale che in quella fondamentale di calibrazione del modello ad una specifica rete stradale (quella della Provincia di Bologna). Inoltre viene sottolineato come la fruibilità e la completezza dei dati a disposizione, possano costituire la base per sviluppi di ricerca futuri, come ad esempio l’indagine sulle correlazioni esistenti tra le variabili indipendenti che agiscono sulla sicurezza stradale.

Creazione e sviluppo di corpora multimediali. Nuove metodologie di ricerca nella traduzione audiovisiva

The construction and use of multimedia corpora has been advocated for a while in the literature as one of the expected future application fields of Corpus Linguistics. This research project represents a pioneering experience aimed at applying a data-driven methodology to the study of the field of AVT, similarly to what has been done in the last few decades in the macro-field of Translation Studies. This research was based on the experience of Forlixt 1, the Forlì Corpus of Screen Translation, developed at the University of Bologna’s Department of Interdisciplinary Studies in Translation, Languages and Culture. As a matter of fact, in order to quantify strategies of linguistic transfer of an AV product, we need to take into consideration not only the linguistic aspect of such a product but all the meaning-making resources deployed in the filmic text. Provided that one major benefit of Forlixt 1 is the combination of audiovisual and textual data, this corpus allows the user to access primary data for scientific investigation, and thus no longer rely on pre-processed material such as traditional annotated transcriptions. Based on this rationale, the first chapter of the thesis sets out to illustrate the state of the art of research in the disciplinary fields involved. The primary objective was to underline the main repercussions on multimedia texts resulting from the interaction of a double support, audio and video, and, accordingly, on procedures, means, and methods adopted in their translation. By drawing on previous research in semiotics and film studies, the relevant codes at work in visual and acoustic channels were outlined. Subsequently, we concentrated on the analysis of the verbal component and on the peculiar characteristics of filmic orality as opposed to spontaneous dialogic production. In the second part, an overview of the main AVT modalities was presented (dubbing, voice-over, interlinguistic and intra-linguistic subtitling, audio-description, etc.) in order to define the different technologies, processes and professional qualifications that this umbrella term presently includes. The second chapter focuses diachronically on various theories’ contribution to the application of Corpus Linguistics’ methods and tools to the field of Translation Studies (i.e. Descriptive Translation Studies, Polysystem Theory). In particular, we discussed how the use of corpora can favourably help reduce the gap existing between qualitative and quantitative approaches. Subsequently, we reviewed the tools traditionally employed by Corpus Linguistics in regard to the construction of traditional “written language” corpora, to assess whether and how they can be adapted to meet the needs of multimedia corpora. In particular, we reviewed existing speech and spoken corpora, as well as multimedia corpora specifically designed to investigate Translation. The third chapter reviews Forlixt 1's main developing steps, from a technical (IT design principles, data query functions) and methodological point of view, by laying down extensive scientific foundations for the annotation methods adopted, which presently encompass categories of pragmatic, sociolinguistic, linguacultural and semiotic nature. Finally, we described the main query tools (free search, guided search, advanced search and combined search) and the main intended uses of the database in a pedagogical perspective. The fourth chapter lists specific compilation criteria retained, as well as statistics of the two sub-corpora, by presenting data broken down by language pair (French-Italian and German-Italian) and genre (cinema’s comedies, television’s soapoperas and crime series). Next, we concentrated on the discussion of the results obtained from the analysis of summary tables reporting the frequency of categories applied to the French-Italian sub-corpus. The detailed observation of the distribution of categories identified in the original and dubbed corpus allowed us to empirically confirm some of the theories put forward in the literature and notably concerning the nature of the filmic text, the dubbing process and Italian dubbed language’s features. This was possible by looking into some of the most problematic aspects, like the rendering of socio-linguistic variation. The corpus equally allowed us to consider so far neglected aspects, such as pragmatic, prosodic, kinetic, facial, and semiotic elements, and their combination. At the end of this first exploration, some specific observations concerning possible macrotranslation trends were made for each type of sub-genre considered (cinematic and TV genre). On the grounds of this first quantitative investigation, the fifth chapter intended to further examine data, by applying ad hoc models of analysis. Given the virtually infinite number of combinations of categories adopted, and of the latter with searchable textual units, three possible qualitative and quantitative methods were designed, each of which was to concentrate on a particular translation dimension of the filmic text. The first one was the cultural dimension, which specifically focused on the rendering of selected cultural references and on the investigation of recurrent translation choices and strategies justified on the basis of the occurrence of specific clusters of categories. The second analysis was conducted on the linguistic dimension by exploring the occurrence of phrasal verbs in the Italian dubbed corpus and by ascertaining the influence on the adoption of related translation strategies of possible semiotic traits, such as gestures and facial expressions. Finally, the main aim of the third study was to verify whether, under which circumstances, and through which modality, graphic and iconic elements were translated into Italian from an original corpus of both German and French films. After having reviewed the main translation techniques at work, an exhaustive account of possible causes for their non-translation was equally provided. By way of conclusion, the discussion of results obtained from the distribution of annotation categories on the French-Italian corpus, as well as the application of specific models of analysis allowed us to underline possible advantages and drawbacks related to the adoption of a corpus-based approach to AVT studies. Even though possible updating and improvement were proposed in order to help solve some of the problems identified, it is argued that the added value of Forlixt 1 lies ultimately in having created a valuable instrument, allowing to carry out empirically-sound contrastive studies that may be usefully replicated on different language pairs and several types of multimedia texts. Furthermore, multimedia corpora can also play a crucial role in L2 and translation teaching, two disciplines in which their use still lacks systematic investigation.

Analisi del profilo tossicologico e cancerogeno di contaminanti ambientali e identificazione dei rischi per la salute umana correlati all'esposizione

L’attenta analisi della letteratura scientifica su argomenti riguardanti i contaminanti ambientali oggetto di studio (i policlorodifenili) ha permesso di raccogliere dati utili riguardanti le proprietà di queste molecole, la loro diffusione e la loro pericolosità. Oggetto della ricerca è stato lo studio in vitro del potenziale citotossico e trasformante dei PCB, utilizzando come riferimento una miscela commerciale di PCB, l’Aroclor 1260, e di un MIX di 18 congeneri ricostituito in laboratorio. Il lavoro è proseguito con la valutazione degli effetti di queste miscele e di due congeneri singoli (PCB 118 e PCB 153) su linee cellulari diverse in test di vitalità a breve termine. L’utilizzo di test specifici ha poi permesso la valutazione di un possibile potenziale estrogenico. Una volta ottenuto un quadro generale sui possibili effetti delle miscele grazie ai risultati dei test funzionali, è stata valutata la modulazione, da parte delle molecole e/o di miscele delle stesse, dell’espressione di geni coinvolti nella risposta ad estrogeni o a composti diossino simili, andando ad effettuare un’analisi di tipo molecolare con Real-Time PCR (RT-PCR) e analizzando nello specifico marcatori di pathway dell’Aryl Hydrocarbon Receptor (AhR) o dell’Estrogen Receptor (ER). In ultima analisi al fine di verificare l’applicabilità di biomarkers di espressione a situazioni di contaminazioni reali, ci si è focalizzati su campioni estratti da matrici ambientali, ed in particolare linee cellulari di interesse sono state esposte a estratti di sedimenti provenienti da siti inquinati. L’approccio scelto è stato di tipo molecolare, con lo scopo di individuare pathway da valutare in un secondo momento in test funzionali specifici. L’attività di ricerca si è avvalsa della tecnica del DNA-microarray per valutare la modulazione dell’espressione genica in risposta all’esposizione a contaminanti ambientali. In questo modo è possibile definire i profili di espressione genica che sottendono a risposte biologiche complesse nell’intento di individuare biomarcatori in grado di predire il rischio per l’uomo, e di consentire la stima di una relazione diretta tra esposizione ed effetti possibili.

Le politiche giudiziarie inglesi degli anni 2000: mutamento di paradigma e rafforzamento dell'incisività politica dei giudici

The Ph.D. dissertation analyses the reasons for which political actors (governments, legislatures and political parties) decide consciously to give away a source of power by increasing the political significance of the courts. It focuses on a single case of particular significance: the passage of the Constitutional Reform Act 2005 in the United Kingdom. This Act has deeply changed the governance and the organization of the English judicial system, has provided a much clearer separation of powers and a stronger independence of the judiciary from the executive and the legislative. What’s more, this strengthening of the judicial independence has been decided in a period in which the political role of the English judges was evidently increasing. I argue that the reform can be interpreted as a «paradigm shift» (Hall 1993), that has changed the way in which the judicial power is considered. The most diffused conceptions in the sub-system of the English judicial policies are shifted, and a new paradigm has become dominant. The new paradigm includes: (i) stronger separation of powers, (ii) collective (as well as individual) conception of the independence of the judiciary, (iii) reduction of the political accountability of the judges, (iv) formalization of the guarantees of judicial independence, (v) principle-driven (instead of pragmatic) approach to the reforms, and (vi) transformation of a non-codified constitution in a codified one. Judicialization through political decisions represent an important, but not fully explored, field of research. The literature, in particular, has focused on factors unable to explain the English case: the competitiveness of the party system (Ramseyer 1994), the political uncertainty at the time of constitutional design (Ginsburg 2003), the cultural divisions within the polity (Hirschl 2004), federal institutions and division of powers (Shapiro 2002). All these contributes link the decision to enhance the political relevance of the judges to some kind of diffusion of political power. In the contemporary England, characterized by a relative high concentration of power in the government, the reasons for such a reform should be located elsewhere. I argue that the Constitutional Reform Act 2005 can be interpreted as a result of three different kinds of reasons: (i) the social and demographical transformations of the English judiciary, which have made inefficient most of the precedent mechanism of governance, (ii) the role played by the judges in the policy process and (iii) the cognitive and normative influences originated from the European context, as a consequence of the membership of the United Kingdom to the European Union and the Council of Europe. My thesis is that only a full analysis of all these three aspects can explain the decision to reform the judicial system and the content of the Constitutional Reform Act 2005. Only the cultural influences come from the European legal complex, above all, can explain the paradigm shift previously described.

Le mostre di moda contemporanee come dispositivo testuale

La tesi si pone come obiettivo quello di indagare le mostre di moda contemporanee come macchine testuali. Se consideriamo l’attuale panorama del fashion design come caratterizzato da una complessità costitutiva e da rapidi mutamenti che lo attraversano, e se partiamo dal presupposto che lo spettro di significati che uno stile di abbigliamento e i singoli capi possono assumere è estremamente sfuggente, probabilmente risulta più produttivo interrogarsi su come funziona la moda, su quali sono i suoi meccanismi di produzione di significato. L’analisi delle fashion exhibition si rivela quindi un modo utile per affrontare la questione, dato che gli allestimenti discorsivizzano questi meccanismi e rappresentano delle riflessioni tridimensionali attorno a temi specifici. La mostra di moda mette in scena delle eccezionalità che magnificano aspetti tipici del funzionamento del fashion system, sia se ci rivolgiamo alla moda dal punto di vista della produzione, sia se la consideriamo dal punto di vista della fruizione. L’indagine ha rintracciato nelle mostre curate da Diana Vreeland al Costume Institute del Metropolitan Museum di New York il modello di riferimento per le mostre di moda contemporanee. Vreeland, che dal 1936 al 1971 è stata prima fashion editor e poi editor-in-chief rispettivamente di “Harper’s Bazaar” e di “Vogue USA”, ha segnato un passaggio fondamentale quando nel 1972 ha deciso di accettare il ruolo di Special Consultant al Costume Institute. È ormai opinione diffusa fra critici e studiosi di moda che le mostre da lei organizzate nel corso di più di un decennio abbiano cambiato il modo di mettere in scena i vestiti nei musei. Al lavoro di Vreeland abbiamo poi accostato una recente mostra di moda che ha fatto molto parlare di sé: Spectres. When Fashion Turns Back, a cura di Judith Clark (2004). Nell’indagare i rapporti fra il fashion design contemporaneo e la storia della moda questa mostra ha utilizzato macchine allestitive abitate dai vestiti, per “costruire idee spaziali” e mettere in scena delle connessioni non immediate fra passato e presente. Questa mostra ci è sembrata centrale per evidenziare lo sguardo semiotico del curatore nel suo interrogarsi sul progetto complessivo dell’exhibition design e non semplicemente sullo studio degli abiti in mostra. In questo modo abbiamo delineato due posizioni: una rappresentata da un approccio object-based all’analisi del vestito, che si lega direttamente alla tradizione dei conservatori museali; l’altra rappresentata da quella che ormai si può considerare una disciplina, il fashion curation, che attribuisce molta importanza a tutti gli aspetti che concorrono a formare il progetto allestitivo di una mostra. Un lavoro comparativo fra alcune delle più importanti mostre di moda recentemente organizzate ci ha permesso di individuare elementi ricorrenti e specificità di questi dispositivi testuali. Utilizzando il contributo di Manar Hammad (2006) abbiamo preso in considerazione i diversi livelli di una mostra di moda: gli abiti e il loro rapporto con i manichini; l’exhibition design e lo spazio della mostra; il percorso e la sequenza, sia dal punto di vista della strategia di costruzione e dispiegamento testuale, sia dal punto di vista del fruitore modello. Abbiamo così individuato quattro gruppi di mostre di moda: mostre museali-archivistiche; retrospettive monografiche; mostre legate alla figura di un curatore; forme miste che si posizionano trasversalmente rispetto a questi primi tre modelli. Questa sistematizzazione ha evidenziato che una delle dimensione centrali per le mostre di moda contemporanee è proprio la questione della curatorship, che possiamo leggere in termini di autorialità ed enunciazione. Si sono ulteriormente chiariti anche gli orizzonti valoriali di riferimento: alla dimensione dell’accuratezza storica è associata una mostra che predilige il livello degli oggetti (gli abiti) e un coinvolgimento del visitatore puramente visivo; alla dimensione del piacere visivo possiamo invece associare un modello di mostra che assegna all’exhibition design un ruolo centrale e “chiede” al visitatore di giocare un ruolo pienamente interattivo. L’approccio curatoriale più compiuto ci sembra essere quello che cerca di conciliare queste due dimensioni.

Contributo dei sistemi di fusione d'immagine mediante ecografia combinata con TAC e o RMN nella diagnosi del piccolo epatocarcinoma (< 2 cm) in pazienti con epatopatia cronica

L’ecografia è la metodica diagnostica più utilizzata come screening e follow-up nei pazienti epatopatici con o senza lesioni focali e questo grazie alle sue peculiari caratteristiche, che sono date dall’essere real-time, maneggevole, priva di radiazioni ionizzanti e con bassi costi. Tuttavia tale metodica se confrontata con la TC o la RMN, può avere importanti limiti, quali l’impossibilità di visualizzare piccole lesioni localizzate in aree anatomicamente “difficili” o in pazienti obesi, che sono già state identificate con altre tecniche, come la TC o la RMN. Per superare queste limitazioni sono stati introdotti dei sistemi di “fusione d’immagine” che consentono di sincronizzare in tempo reale una metodica real time con bassa risoluzione spaziale come l’ecografia ed una statica ad alta risoluzione come la TC o la RMN. Ciò si ottiene creando attorno al paziente un piccolo campo elettromagnetico costituito da un generatore e da un rilevatore applicato al trasduttore ecografico ed introducendo in un computer abbinato all’ecografo il “volume rendering” dell’addome del paziente ottenuto mediante TC multistrato o RM. Il preciso “ appaiamento spaziale “ delle due metodiche si ottiene individuando in entrambe lo stesso piano assiale di riferimento e almeno 3-4 punti anatomici interni. Tale sistema di fusione d’immagine potrebbe essere molto utile in campo epatologico nella diagnostica non invasiva del piccolo epatocarcinoma, che secondo le ultime linee guida, nei noduli di dimensioni fra 1 e 2 cm, richiede una concordanza nel comportamento contrastografico della lesione in almeno due tecniche d’immagine. Lo scopo del nostro lavoro è stato pertanto quello di valutare, in pazienti epatopatici, il contributo che tale sistema può dare nell’identificazione e caratterizzazione di lesioni inferiori a 20 mm, che erano già state identificate alla TC o alla RMN come noduli sospetti per HCC, ma che non erano stati visualizzati in ecografia convenzionale. L’eventuale re-identificazione con l’ecografia convenzionale dei noduli sospetti per essere HCC, può permettere di evitare, alla luce dei criteri diagnostici non invasivi un’ ulteriore tecnica d’immagine ed eventualmente la biopsia. Pazienti e Metodi: 17 pazienti cirrotici (12 Maschi; 5 Femmine), con età media di 68.9 +/- 6.2 (SD) anni, in cui la TC e la RMN con mezzo di contrasto avevano identificato 20 nuove lesioni focali epatiche, inferiori a 20 mm (13,6 +/- 3,6 mm), sospette per essere epatocarcinomi (HCC), ma non identificate all’ecografia basale (eseguita in cieco rispetto alla TC o alla RMN) sono stati sottoposti ad ecografia senza e con mezzo di contrasto, focalizzata su una zona bersaglio identificata tramite il sistema di fusione d’immagini, che visualizza simultaneamente le immagini della TC e della RMN ricostruite in modalità bidimensionale ( 2D), tridimensionale ( 3 D) e real-time. La diagnosi finale era stata stabilita attraverso la presenza di una concordanza diagnostica, secondo le linee guida internazionali o attraverso un follow-up nei casi di discordanza. Risultati: Una diagnosi non invasiva di HCC è stata raggiunta in 15/20 lesioni, inizialmente sospettate di essere HCC. Il sistema di fusione ha identificato e mostrato un comportamento contrastografico tipico in 12/15 noduli di HCC ( 80%) mentre 3/15 HCC (20%) non sono stati identificati con il sistema di fusione d’immagine. Le rimanenti 5/20 lesioni non sono state visualizzate attraverso i sistemi di fusione d’immagine ed infine giudicate come falsi positivi della TC e della RMN, poiché sono scomparse nei successivi mesi di follow-up e rispettivamente dopo tre, sei, nove, dodici e quindici mesi. Conclusioni: I nostri risultati preliminari mostrano che la combinazione del sistema di fusione dell’immagine associata all’ecografia senza e con mezzo di contrasto (CEUS), migliora il potenziale dell’ecografia nell’identificazione e caratterizzazione dell’HCC su fegato cirrotico, permettendo il raggiungimento di una diagnosi, secondo criteri non invasivi e slatentizzazndo casi di falsi positivi della TC e della RMN.

Contributo di un software di quantificazione del segnale contrastografico(SonoLiver®) nella diagnosi ecografica di Epatocarcinoma su Cirrosi.

Introduzione La diagnosi di HCC con le tecniche di immagine ed in particolare con CEUS su fegato cirrotico secondo le ultime linee guida prevede un comportamento contrastografico di ipervascolarizzazione nella fase arteriosa e wash-out nella fase tardiva. CEUS è ormai una metodica accettata per la diagnosi ma il wash out nella fase tardiva presenta notevoli difficoltà nel determinare il comportamento contrastografico in quanto valutato soggettivamente su display, infatti il giudizio di tale fase dipende molto dall’operatore e non è rarissimo che nascono discordanza tra operatori anche per piccole differenze. Recentemente è stato proposto un nuovo software(SonoLiver, Bracco, Italy) in grado di quantificare la perfusione delle lesione durante CEUS. Pertanto lo scopo di questo studio pilota è quello di valutare l’impatto di SonoLiver nel rilevare caratteristiche contrastografiche tipiche dell’HCC e valutare la riproducibilità tra due operatori. Pazienti e metodi: Sono stati presi in considerazione 20 noduli (di dimensioni tra 12-95 mm) con diagnosi di HCC in 20 pazienti con cirrosi . La CEUS è stata valutata dapprima ad occhio nudo su display e successivamente con le curve ottenute con DVP da parte di due operatori diversi in cieco, dopo un periodo di formazione adeguata. Sono state quindi analizzate le performance di ciascuna metodica sia in termini di variabilità tra i due operatori che la variabilità tra CEUS ad occhio nudo e CEUS con SonoLiver dello stesso operatore. Risultati:Operatore 1 ha rilevato ipervascolarizzazione in fase arteriosa in 17 su 20 pazienti con valutazione ad occhio nudo su schermo e su 19/20 con le curve ottenute con DVP (+10% sensibilità) mentre operatore 2 ha rilevato ipervascolarizzazione in fase arteriosa19/20 pazienti sia con valutazione ad occhio nudo che con le curve DVP. Nella fase tardiva il wash-out è stato rilevato in 7/20 ad occhio nudo e 10/20 pazienti con le curve DVP (sensibilità aumenta da 35% a 50%) mentre operatore 2 ha rilevato rispettivamente 8/20 e 11/20 (sensibilità aumenta da 40% a 55%). La riproducibilità tra i due operatori rimane invariata con la valutazione di Sonoliver sia nella fase arteriosa che nella fase tardiva. Conclusione:La quantificazione perfusionale con SonoLiver sembra essere uno strumento promettente nella diagnosi di HCC su fegato cirrotico, aumentando aspetti tipici contrastografici.

Liquid crystal polymers: macromolecular design for enhanced performances

During this work, done mainly in the laboratories of the department of Industrial Chemistry and Materials of the University of Bologna but also in the laboratories of the Carnegie Mellon University in collaboration with prof. K. Matyjaszewski and at the university of Zaragoza in collaboration with prof. J. Barberá, was focused mainly on the synthesis and characterization of new functional polymeric materials. In the past years our group gained a deep knowledge about the photomodulation of azobenzene containing polymers. The aim of this thesis is to push forward the performances of these materials by the synthesis of well defined materials, in which, by a precise control over the macromolecular structures, better or even new functionality can be delivered to the synthesized material. For this purpose, besides the rich photochemistry of azoaromatic polymers that brings to the application, the control offered from the recent techniques of controlled radical polymerization, ATRP over all, gives an enormous range of opportunity for the developing of a new generation of functional materials whose properties are determinate not only by the chemical nature of the functional center (e.g. azoaromatic chromophore) but are tuned and even amplified by a synergy with the whole macromolecular structure. Old materials in new structures. In this contest the work of this thesis was focused mainly on the synthesis and characterization of well defined azoaromatic polymers in order to establish, for the first time, precise structure-properties correlation. In fact a series of well defined different azopolymers, chiral and achiral, with different molecular weight and highly monodisperse were synthesized and their properties were studied, in terms of photoexpansion and photomodulation of chirality. We were then able to study the influence of the macromolecular structure in terms of molecular weight and ramification on the studied properties. The huge amount of possibility offered by the tailoring of the macromolecular structure were exploited for the synthesis of new cholesteric photochromic polymers that can be used as a smart label for the certification of the thermal history of any thermosensitive product. Finally the ATRP synthesis allowed us to synthesize a total new class of material, named molecular brushes: a flat surface covered with an ultra thin layer of polymeric chain covalently bond onto the surface from one end. This new class of materials is of extreme interest as they offer the possibility to tune and manage the interaction of the surface with the environment. In this contest we synthesized both azoaromatic surfaces, growing directly the polymer from the surface, and mixed brushes: surfaces covered with incompatible macromolecules. Both type of surfaces acts as “smart” surfaces: the first it is able to move the orientation of a LC cell by simply photomodulation and, thanks to the robustness of the covalent bond, can be used as a command surface overcoming all the limitation due to the dewetting of the active layer. The second type of surface, functionalized by a grafting-to method, can self assemble the topmost layer responding to changed environmental conditions, exposing different functionality according to different environment.

Costrutti ed Applicazioni di Programmazione Generica in Linguaggi Object-Oriented

Generic programming is likely to become a new challenge for a critical mass of developers. Therefore, it is crucial to refine the support for generic programming in mainstream Object-Oriented languages — both at the design and at the implementation level — as well as to suggest novel ways to exploit the additional degree of expressiveness made available by genericity. This study is meant to provide a contribution towards bringing Java genericity to a more mature stage with respect to mainstream programming practice, by increasing the effectiveness of its implementation, and by revealing its full expressive power in real world scenario. With respect to the current research setting, the main contribution of the thesis is twofold. First, we propose a revised implementation for Java generics that greatly increases the expressiveness of the Java platform by adding reification support for generic types. Secondly, we show how Java genericity can be leveraged in a real world case-study in the context of the multi-paradigm language integration. Several approaches have been proposed in order to overcome the lack of reification of generic types in the Java programming language. Existing approaches tackle the problem of reification of generic types by defining new translation techniques which would allow for a runtime representation of generics and wildcards. Unfortunately most approaches suffer from several problems: heterogeneous translations are known to be problematic when considering reification of generic methods and wildcards. On the other hand, more sophisticated techniques requiring changes in the Java runtime, supports reified generics through a true language extension (where clauses) so that backward compatibility is compromised. In this thesis we develop a sophisticated type-passing technique for addressing the problem of reification of generic types in the Java programming language; this approach — first pioneered by the so called EGO translator — is here turned into a full-blown solution which reifies generic types inside the Java Virtual Machine (JVM) itself, thus overcoming both performance penalties and compatibility issues of the original EGO translator. Java-Prolog integration Integrating Object-Oriented and declarative programming has been the subject of several researches and corresponding technologies. Such proposals come in two flavours, either attempting at joining the two paradigms, or simply providing an interface library for accessing Prolog declarative features from a mainstream Object-Oriented languages such as Java. Both solutions have however drawbacks: in the case of hybrid languages featuring both Object-Oriented and logic traits, such resulting language is typically too complex, thus making mainstream application development an harder task; in the case of library-based integration approaches there is no true language integration, and some “boilerplate code” has to be implemented to fix the paradigm mismatch. In this thesis we develop a framework called PatJ which promotes seamless exploitation of Prolog programming in Java. A sophisticated usage of generics/wildcards allows to define a precise mapping between Object-Oriented and declarative features. PatJ defines a hierarchy of classes where the bidirectional semantics of Prolog terms is modelled directly at the level of the Java generic type-system.

Il concetto di sezione nel metodo compositivo di Aldo Rossi.

Purpose of this research is to deepen the study on the section in architecture. The survey aims as important elements in the project Teatro Domestico by Aldo Rossi built for the XVII Triennale di Milano in 1986 and, through the implementation on several topics of architecture, verify the timeliness and fertility in the new compositional exercises. Through the study of certain areas of the Rossi’s theory we tried to find a common thread for the reading of the theater project. The theater is the place of the ephemeral and the artificial, which is why his destiny is the end and the fatal loss. The design and construction of theater setting has always had a double meaning between the value of civil architecture and testing of new technologies available. Rossi's experience in this area are clear examples of the inseparable relationship between the representation of architecture as art and design of architecture as a model of reality. In the Teatro Domestico, the distinction between representation and the real world is constantly canceled and returned through the reversal of the meaning and through the skip of scale. At present, studies conducted on the work of Rossi concern the report that the architectural composition is the theory of form, focusing compositional development of a manufacturing process between the typological analysis and form invention. The research, through the analysis of some projects few designs, will try to analyze this issue through the rules of composition both graphical and concrete construction, hoping to decipher the mechanism underlying the invention. The almost total lack of published material on the project Teatro Domestico and the opportunity to visit the archives that preserve the drawings, has allowed the author of this study to deepen the internal issues in the project, thus placing this search as a first step toward possible further analysis on the works of Rossi linked to performance world. The final aim is therefore to produce material that can best describe the work of Rossi. Through the reading of the material published by the same author and the vision of unpublished material preserved in the archives, it was possible to develop new material and increasing knowledge about the work, otherwise difficult to analyze. The research is divided into two groups. The first, taking into account the close relationship most frequently mentioned by Rossi himself between archeology and architectural composition, stresses the importance of tipo such as urban composition reading system as well as open tool of invention. Resuming Ezio Bonfanti’s essay on the work of the architect we wanted to investigate how the paratactic method is applied to the early work conceived and, subsequently as the process reaches a complexity accentuated, while keeping stable the basic terms. Following a brief introduction related to the concept of the section and the different interpretations that over time the term had, we tried to identify with this facility a methodology for reading Rossi’s projects. The result is a constant typological interpretation of the term, not only related to the composition in plant but also through the elevation plans. The section is therefore intended as the overturning of such elevation is marked on the same plane of the terms used, there is a different approach, but a similarity of characters. The identification of architectural phonemes allows comparison with other arts. The research goes in the direction of language trying to identify the relationship between representation and construction, between the ephemeral and the real world. In this sense it will highlight the similarities between the graphic material produced by Ross and some important examples of contemporary author. The comparison between the composition system with the surrealist world of painting and literature will facilitate the understanding and identification of possible rules applied by Rossi. The second part of the research is characterized by a focus on the intent of the project chosen. Teatro Domestico embodies a number of elements that seem to conclude (assuming an end point but also to start) a curriculum author. With it, the experiments carried out on the theater started with the project for the Teatrino Scientifico (1978) through the project for the Teatro del Mondo (1979), into a Laic Tabernacle representative collective and private memory of the city. Starting from a reading of the draft, through the collection of published material, we’ve made an analysis on the explicit themes of the work, finding the conceptual references. Following the taking view of the original materials not published kept at Aldo Rossi's Archive Collection of the Canadian Center for Architecture in Montréal, will be implemented through the existing techniques for digital representation, a virtual reconstruction of the project, adding little to the material, a new element for future studies. The reconstruction is part of a larger research studies where the current technologies of composition and representation in architecture stand side by side with research on the method of composition of this architect. The results achieved are in addition to experiences in the past dealt with the reconstruction of some of the lost works of Aldo Rossi. A partial objective is to reactivate a discourse around this work is considered non-principal, among others born in the prolific activities. Reassessment of development projects which would bring the level of ephemeral works most frequented by giving them the value earned. In conclusion, the research aims to open a new field of interest on the part not only as a technical instrument of representation of an idea but as an actual mechanism through which composition is formed and the idea is developed.

Design and development of new green catalytic methodologies for the synthesis of enantiomerically enriched molecules

The following Ph.D work was mainly focused on catalysis, as a key technology, to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and an assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry was briefly discussed and illustrated via an analysis of some selected and relevant examples. Afterwards, as a continuation of the ongoing interest in Dr. Marco Bandini’s group on organometallic and organocatalytic processes, I addressed my efforts to the design and development of novel catalytic green methodologies for the synthesis of enantiomerically enriched molecules. In the first two projects the attention was focused on the employment of solid supports to carry out reactions that still remain a prerogative of omogeneous catalysis. Firstly, particular emphasis was addressed to the discovery of catalytic enantioselective variants of nitroaldol condensation (commonly termed Henry reaction), using a complex consisting in a polyethylene supported diamino thiopene (DATx) ligands and copper as active species. In the second project, a new class of electrochemically modified surfaces with DATx palladium complexes was presented. The DATx-graphite system proved to be efficient in promoting the Suzuki reaction. Moreover, in collaboration with Prof. Wolf at the University of British Columbia (Vancouver), cyclic voltammetry studies were reported. This study disclosed new opportunities for carbon–carbon forming processes by using heterogeneous, electrodeposited catalyst films. A straightforward metal-free catalysis allowed the exploration around the world of organocatalysis. In fact, three different and novel methodologies, using Cinchona, Guanidine and Phosphine derivatives, were envisioned in the three following projects. An interesting variant of nitroaldol condensation with simple trifluoromethyl ketones and also their application in a non-conventional activation of indolyl cores by Friedel-Crafts-functionalization, led to two novel synthetic protocols. These approaches allowed the preparation of synthetically useful trifluoromethyl derivatives bearing quaternary stereocenters. Lastly, in the sixth project the first γ-alkylation of allenoates with conjugated carbonyl compounds was envisioned. In the last part of this Ph.D thesis bases on an extra-ordinary collaboration with Prof. Balzani and Prof. Gigli, I was involved in the synthesis and characterization of a new type of heteroleptic cyclometaled-Ir(III) complexes, bearing bis-oxazolines (BOXs) as ancillary ligands. The new heteroleptic complexes were fully characterized and in order to examine the electroluminescent properties of FIrBOX(CH2), an Organic Light Emitting Device was realized.