The Social City : Middle-way approaches to housing and sub-urban golvernmentality in southern Stockholm, 1900-1945

This dissertation deals with the period bridging the era of extreme housing shortages in Stockholm on the eve of industrialisation and the much admired programmes of housing provision that followed after the second world war, when Stockholm district Vällingby became an example for underground railway-serviced ”new towns”. It is argued that important changes were made in the housing and town planning policy in Stockholm in this period that paved the way for the successful ensuing period. Foremost among these changes was the uniquely developed practice of municipal leaseholding with the help of site leasehold rights (Erbbaurecht). The study is informed by recent developments in Foucauldian social research, which go under the heading ’governmentality’. Developments within urban planning are understood as different solutions to the problem of urban order. To a large extent, urban and housing policies changed during the period from direct interventions into the lives of inhabitants connected to a liberal understanding of housing provision, to the building of a disciplinary city, and the conduct of ’governmental’ power, building on increased activity on behalf of the local state to provide housing and the integration and co-operation of large collectives. Municipal leaseholding was a fundamental means for the implementation of this policy. When the new policies were introduced, they were limited to the outer parts of the city and administered by special administrative bodies. This administrative and spatial separation was largely upheld throughout the period, and represented as the parallel building of a ’social’ outer city, while things in the inner ’mercantile’ city proceeded more or less as before. This separation was founded in a radical difference in land holding policy: while sites in the inner city were privatised and sold at market values, land in the outer city was mostly leasehold land, distributed according to administrative – and thus politically decided – priorities. These differences were also understood and acknowledged by the inhabitants. Thorough studies of the local press and the organisational life of the southern parts of the outer city reveals that the local identity was tightly connected with the representations connected to the different land holding systems. Inhabitants in the south-western parts of the city, which in this period was still largely built on private sites, displayed a spatial understanding built on the contradictions between centre and periphery. The inhabitants living on leaseholding sites, however, showed a clear understanding of their position as members of model communities, tightly connected to the policy of the municipal administration. The organisations on leaseholding sites also displayed a deep co-operation with the administration. As the analyses of election results show, the inhabitants also seemed to have felt a greater degree of integration with the society at large, than people living in other parts of the city. The leaseholding system in Stockholm has persisted until today and has been one of the strongest in the world, although the local neo-liberal politicians are currently disposing it off.

Dispersal in free-living, marine, benthic nematodes : passive or active processes?

Meiofauna, and especially marine nematodes are common in sediments around the world. Despite very wide ranging distributions in many nematode species, little is presently known about their dispersal mechanisms shaping these patterns. Rafting, and perhaps ballast water transport has been suggested as viable means for nematode long-range transport. On a much smaller scale other processes have been suggested for their dispersal. They generally include some form of passive suspension into the water column and later on a passive, haphazard settling back towards the bottom. Small-scale phenomena in nematode dispersal were studied by conducting a series of studies at Askö field station, Trosa Archipelago, Baltic proper. Studied aspects were one case of macrofaunal influence on nematode dispersal rate, using an amphipod, Monoporeia affinis as disturbing agent, and three different studies on mechanisms related to settling. The experiments were conducted both in laboratory and field settings. The amphipod Monoporeia affinis did not exert any influence on the dispersal rate in the nematodes. The nematode dispersal was only an effect of time, in the aspect that the more time that past, the more nematodes dispersed from their place of origin. The settling experiments revealed that nematodes do have an active component in their settling behaviour, as they were able to exert influence on the spot where they were to settle. They were able to choose settling spot in response to the food quality of the sediment. It also became evident that contrary to common belief, nematodes are able to extend their presence in the water column far beyond the times that would be predicted considering settling velocities and hydrodynamic conditions alone.

Preparation and characterisation of refractory whiskers and selected alumina composites

A whisker is a common name of single crystalline inorganic fibre of small dimensions, typically 0.5-1 μm in diameter and 20-50 μm in length. Whiskers are mainly used as reinforcement of ceramics. This work describes the synthesis and characterisation of new whisker types. Ti0.33Ta0.33Nb0.33CxN1-x, TiB2, B4C, and LaxCe1-xB6 have been prepared by carbothermal vapour–liquid–solid (CTR-VLS) growth mechanisms in the temperature range 900-1800°C, in argon or nitrogen. Generally, carbon and different suitable oxides were used as whisker precursors. The oxides reacted via a carbothermal reduction process. A halogenide salt was added to form gaseous metal halogenides or oxohalogenides and small amount of a transition metal was added to catalyse the whisker growth. In this mechanism, the whisker constituents are dissolved into the catalyst, in liquid phase, which becomes supersaturated. Then a whisker could nucleate and grow out under continuous feed of constituents. The syntheses of TiC, TiB2, and B4C were followed at ordinary synthesis conditions by means of mass spectrometry (MS), thermogravimetry (TG), differential thermal analysis (DTA) and quenching. The main reaction starting temperatures and reaction time for the different mixtures was revealed, and it was found that the temperature inside the crucible during the reactions was up to 100°C below the furnace set-point, due to endothermic nature of the reactions. Quench experiments showed that whiskers were formed already when reaching the temperature plateau, but the yield increased fast with the holding time and reached a maximum after about 20-30 minutes. Growth models for whisker formation have been proposed. Alumina based composites reinforced by (2-5 vol.%) TiCnano and TiNnano and 25 vol.% of carbide, and boride phases (whiskers and particulates of TiC, TiN, TaC, NbC, (Ti,Ta)C, (Ti,Ta,Nb)C, SiC, TiB2 and B4C) have been prepared by a developed aqueous colloidal processing route followed by hot pressing for 90 min at 1700°C, 28 MPa or SPS sintering for 5 minutes at 1200-1600°C and 75 MPa. Vickers indentation measurements showed that the lowest possible sintering temperature is to prefer from mechanical properties point of view. In the TiNnano composites the fracture mode was typically intergranular, while it was transgranular in the SiCnano composites. The whisker and particulate composites have been compared in terms of e.g. microstructure and mechanical properties. Generally, additions of whiskers yielded higher fracture toughness compared to particulates. Composites of commercially available SiC whiskers showed best mechanical properties with a low spread but all the other whisker phases, especially TiB2, exhibited a great potential as reinforcement materials.