Interactions between calcium and heavy metals in Norway spruce : Accumulation and binding of metals in wood and bark

Waste products from the forest industry are to be spread in forests in Sweden to counteract nutrient depletion due to whole tree harvesting. This may increase the bioavailability of calcium (Ca) and heavy metals, such as cadmium (Cd), copper (Cu) and zinc (Zn) in forest soils. Heavy metals, like Cd, have already been enriched in forest soils in Sweden, due to deposition of air pollutions, and acidification of forest soils has increased the bioavailability of toxic metals for plant uptake. Changes in the bioavailability of metals may be reflected in altered accumulation of Ca and heavy metals in forest trees, changes in tree growth, including wood formation, and altered tree species composition. This thesis aims at examining: A) if inter- or intra- specific differences in sensitivity to Cd occur in the most common tree species of Sweden, and if so, to study if these can be explained by the uptake and distribution of Cd within the plant: B) how elevated levels of Ca, Cd, Cu and Zn affect the accumulation and attachment of metals in bark and wood, and growth of young Norway spruce (Picea abies): C) how waste products from the forest industry, such as wood ash, influence the contents of Ca, Cd, Cu and Zn in wood and bark of young Norway spruce. Sensitivity to Cd, and its uptake and distribution, in seedlings of Picea abies, Pinus sylvestris and Betula pendula from three regions (southern, central and northern parts) of Sweden, treated with varying concentrations of Cd, were compared. Differences in root sensitivity to Cd both among and within woody species were found and the differences could to some extent be explained by differences in uptake and translocation of Cd. The root sensitivity assays revealed that birch was the least, and spruce the most, sensitive species, both to the external and to tissue levels of Cd. The central ecotype of the species tested tended to be most Cd resistant. The radial distribution, accumulation and attachment of, and interactions between Ca and heavy metals in stems of two-year-old Norway spruce trees treated with elevated levels of Cd, Cu, Zn and/or Ca, were investigated. Further, the influence of these metals on growth, and on root metal content, was examined. Accumulation of the metals was enhanced in wood, bark and/or roots at elevated levels of the metal in question. Even at low levels of the metals, similar to after application of wood ash, an enhanced accumulation was apparent in wood and/or bark, except for Cd. The increased accumulation of Zn and Cu in the stem did not affect the growth. However, Cu decreased the accumulation of Ca in wood. Higher levels of Cu and Cd reduced the stem diameter and the toxic effect was associated with a reduced Ca content in wood. Copper and Cd also decreased the accumulation of Zn in the stem. On the other hand, elevated levels of Ca increased the stem diameter and reduced the accumulation of Cd, Cu, Zn and Mn in wood and/or bark. When metals interacted with each other the firmly bound fraction of the metal reduced was in almost all cases not affected. As an exception, Cd decreased the firmly bound fraction of Zn in the stem. The influence of pellets of wood ash (ash) or a mixture of wood ash and green liquor dregs (ash+GLD), in the amount of 3000 kg ha-1, on the contents of Ca, Cd, Cu and Zn in wood and bark of young Norway spruce in the field was examined. The effect of the treatments on the metal content of bark and wood was larger after 3 years than after 6 years. Treatment with ash+GLD had less effect on the heavy metal content of bark and wood than treatment with ash alone. The ash treatment increased the Cu and Zn content in bark and wood, respectively, after 3 years, and decreased the Ca content of the wood after 6 years. The ash+GLD treatment increased the Ca content of the bark and decreased the Zn content of bark and wood after 3 years. Both treatments reduced, or tended to decrease, the Cd content in wood and bark at both times. To conclude, small changes in the bioavailability of Ca, Cu, Cd and Zn in forest soils, such as after spreading pellets of wood ash or a mixture of wood ash and green liquor dregs from the forest industry, will be reflected in an altered accumulation of metals in wood and bark of Norway spruce. It will not only be reflected in changed accumulation of those metals in which bioavailability in the soil has been enhanced, but also of other metals, probably partly due to interactions between metals. When metals interact the exchangeable bound fraction of the metal reduced is suggested to be the main fraction affected. The small alterations in accumulation of metals should not affect the growth of Norway spruce, especially since the changes in accumulation of metals are low, and further since these decrease over time. However, as an exception, one positive and maybe persistent effect of the waste products is that these may decrease the accumulation of Cd in Norway spruce, which partly may be explained by competition with Ca for uptake, translocation and binding. A decreased accumulation of Cd in Norway spruce will probably affect the trees positively, since Norway spruce is one of the most sensitive species to Cd of the forest trees in Sweden. Thus, spreading of waste products from the forest industry may be a solution to decrease the accumulation of Cd in Norway spruce. In a longer perspective, this will decrease the risk of Cd altering the tree species composition of the forest ecosystem. An elevated bioavailability of Ca in forest soils will, in addition to Cd, probably also decrease the accumulation of other less competitive heavy metals, like Zn and Mn, in the stem.

Spark Plasma Sintering of Si3N4-based Ceramics : Sintering mechanism-Tailoring microstructure-Evaluationg properties

Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulating of sintering kinetics and therefore makes it possible to obtain Si3N4-based ceramics with tailored microstructures, consisting of grains with either equiaxed or elongated morphology. The presence of an extra liquid phase is necessary for forming tough interlocking microstructures in Yb/Y-stabilised α-sialon by HP. The liquid is introduced by a new method, namely by increasing the O/N ratio in the general formula RExSi12-(3x+n)Al3x+nOnN16-n while keeping the cation ratios of RE, Si and Al constant. Monophasic α-sialon ceramics with tailored microstructures, consisting of either fine equiaxed or elongated grains, have been obtained by using SPS, whether or not such an extra liquid phase is involved. The three processes, namely densification, phase transformation and grain growth, which usually occur simultaneously during conventional HP consolidation of Si3N4-based ceramics, have been precisely followed and separately investigated in the SPS process. The enhanced densification is attributed to the non-equilibrium nature of the liquid phase formed during heating. The dominating mechanism during densification is the enhanced grain boundary sliding accompanied by diffusion- and/or reaction-controlled processes. The rapid grain growth is ascribed to a dynamic ripening mechanism based on the formation of a liquid phase that is grossly out of equilibrium, which in turn generates an extra chemical driving force for mass transfer. Monophasic α-sialon ceramics with interlocking microstructures exhibit improved damage tolerance. Y/Yb- stabilised monophasic α-sialon ceramics containing approximately 3 vol% liquid with refined interlocking microstructures have excellent thermal-shock resistance, comparable to the best β-sialon ceramics with 20 vol% additional liquid phase prepared by HP. The obtained sialon ceramics with fine-grained microstructure show formidably improved superplasticity in the presence of an electric field. The compressive strain rate reaches the order of 10-2 s-1 at temperatures above 1500oC, that is, two orders of magnitude higher than that has been realised so far by any other conventional approaches. The high deformation rate recorded in this work opens up possibilities for making ceramic components with complex shapes through super-plastic forming.

Supersymmetric Dark Matter : aspects of sfermion coannihilations

There is very strong evidence that ordinary matter in the Universe is outweighed by almost ten times as much so-called dark matter. Dark matter does neither emit nor absorb light and we do not know what it is. One of the theoretically favoured candidates is a so-called neutralino from the supersymmetric extension of the Standard Model of particle physics. A theoretical calculation of the expected cosmic neutralino density must include the so-called coannihilations. Coannihilations are particle processes in the early Universe with any two supersymmetric particles in the initial state and any two Standard Model particles in the final state. In this thesis we discuss the importance of these processes for the calculation of the relic density. We will go through some details in the calculation of coannihilations with one or two so-called sfermions in the initial state. This includes a discussion of Feynman diagrams with clashing arrows, a calculation of colour factors and a discussion of ghosts in non-Abelian field theory. Supersymmetric models contain a large number of free parameters on which the masses and couplings depend. The requirement, that the predicted density of cosmic neutralinos must agree with the density observed for the unknown dark matter, will constrain the parameters. Other constraints come from experiments which are not related to cosmology. For instance, the supersymmetric loop contribution to the rare b -> sγ decay should agree with the measured branching fraction. The principles of the calculation of the rare decay are discussed in this thesis. Also on-going and planned searches for cosmic neutralinos can constrain the parameters. In one of the accompanying papers in the thesis we compare the detection prospects for several current and future searches for neutralino dark matter.

The Emergence of the Post-Socialist Welfare State - The Case of the Baltic States : Estonia, Latvia and Lithuania

This dissertation takes a step towards providing a better understanding of post-socialist welfare state development from a theoretical as well as an empirical perspective. The overall analytical goal of this thesis has been to critically assess the development of social policies in Estonia, Latvia and Lithuania using them as illustrative examples of post-socialist welfare state development in the light of the theories, approaches and typologies that have been developed to study affluent capitalist democracies. The four studies included in this dissertation aspire to a common aim in a number of specific ways. The first study tries to place the ideal-typical welfare state models of the Baltic States within the well-known welfare state typologies. At the same time, it provides a rich overview of the main social security institutions in the three countries by comparing them with each other and with the previous structures of the Soviet period. It examines the social insurance institutions of the Baltic States (old-age pensions, unemployment insurance, short-term benefits, sickness, maternity and parental insurance and family benefits) with respect to conditions of eligibility, replacement rates, financing and contributions. The findings of this study indicate that the Latvian social security system can generally be labelled as a mix of the basic security and corporatist models. The Estonian social security system can generally also be characterised as a mix of the basic security and corporatist models, even if there are some weak elements of the targeted model in it. It appears that the institutional changes developing in the social security system of Lithuania have led to a combination of the basic security and targeted models of the welfare state. Nevertheless, as the example of the three Baltic States shows, there is diversity in how these countries solve problems within the field of social policy. In studying the social security schemes in detail, some common features were found that could be attributed to all three countries. Therefore, the critical analysis of the main social security institutions of the Baltic States in this study gave strong supporting evidence in favour of identifying the post-socialist regime type that is already gaining acceptance within comparative welfare state research. Study Two compares the system of social maintenance and insurance in the Soviet Union, which was in force in the three Baltic countries before their independence, with the currently existing social security systems. The aim of the essay is to highlight the forces that have influenced the transformation of the social policy from its former highly universal, albeit authoritarian, form, to the less universal, social insurance-based systems of present-day Estonia, Latvia and Lithuania. This study demonstrates that the welfare–economy nexus is not the only important factor in the development of social programs. The results of this analysis revealed that people's attitudes towards distributive justice and the developmental level of civil society also play an important part in shaping social policies. The shift to individualism in people’s mentality and the decline of the labour movement, or, to be more precise, the decline in trade union membership and influence, does nothing to promote the development of social rights in the Baltic countries and hinders the expansion of social policies. The legacy of the past has been another important factor in shaping social programs. It can be concluded that social policy should be studied as if embedded not only in the welfare-economy nexus, but also in the societal, historical and cultural nexus of a given society. Study Three discusses the views of the state elites on family policy within a wider theoretical setting covering family policy and social policy in a broader sense and attempts to expand this analytical framework to include other post-socialist countries. The aim of this essay is to explore the various views of the state elites in the Baltics concerning family policy and, in particular, family benefits as one of the possible explanations for the observed policy differences. The qualitative analyses indicate that the Baltic States differ significantly with regard to the motives behind their family policies. Lithuanian decision-makers seek to reduce poverty among families with children and enhance the parents’ responsibility for bringing up their children. Latvian policy-makers act so as to increase the birth rate and create equal opportunities for children from all families. Estonian policy-makers seek to create equal opportunities for all children and the desire to enhance gender equality is more visible in the case of Estonia in comparison with the other two countries. It is strongly arguable that there is a link between the underlying motives and the kinds of family benefits in a given country. This study, thus, indicates how intimately the attitudes of the state bureaucrats, policy-makers, political elite and researchers shape social policy. It confirms that family policy is a product of the prevailing ideology within a country, while the potential influence of globalisation and Europeanisation is detectable too. The final essay takes into account the opinions of welfare users and examines the performances of the institutionalised family benefits by relying on the recipients’ opinions regarding these benefits. The opinions of the populations as a whole regarding government efforts to help families are compared with those of the welfare users. Various family benefits are evaluated according to the recipients' satisfaction with those benefits as well as the contemporaneous levels of subjective satisfaction with the welfare programs related to the absolute level of expenditure on each program. The findings of this paper indicate that, in Latvia, people experience a lower level of success regarding state-run family insurance institutions, as compared to those in Lithuania and Estonia. This is deemed to be because the cash benefits for families and children in Latvia are, on average, seen as marginally influencing the overall financial situation of the families concerned. In Lithuania and Estonia, the overwhelming majority think that the family benefit systems improve the financial situation of families. It appears that recipients evaluated universal family benefits as less positive than targeted benefits. Some universal benefits negatively influenced the level of general satisfaction with the family benefits system provided in the countries being researched. This study puts forward a discussion about whether universalism is always more legitimate than targeting. In transitional economies, in which resources are highly constrained, some forms of universal benefits could turn out to be very expensive in relative terms, without being seen as useful or legitimate forms of help to families. In sum, by closely examining the different aspects of social policy, this dissertation goes beyond the over-generalisation of Eastern European welfare state development and, instead, takes a more detailed look at what is really going on in these countries through the examples of Lithuania, Latvia and Estonia. In addition, another important contribution made by this study is that it revives ‘western’ theoretical knowledge through ‘eastern’ empirical evidence and provides the opportunity to expand the theoretical framework for post-socialist societies.

Essays on the Economics of Networks Under Incomplete Information

Social networks constitute a major channel for the diffusion of information and the formation of attitudes in a society. Introducing a dynamic model of social learning, the first part of this thesis studies the emergence of socially influential individuals and groups, and identifies the characteristics that make them influential. The second part uses a Bayesian network game to analyse the role of social interaction and conformism in the making of decisions whose returns or costs are ex ante uncertain.