Estudo de propriedades estruturais e de piezeletricidade nos cristais de ADP e KDP puros e dopados com íons Ni2+ e Mn3+ com DMRX utilizando radiação síncrotron

A difração múltipla de raios-X utilizando radiação Síncrotron foi aplicada para o estudo de cátions de metais de transição Mn³⁺ e Ni²⁺ incorporados a rede cristalina do Fosfato de Amônio Monobásico (ADP) e Fosfato de Potássio Monobásico (KDP). Em todos os diagramas Renninger obtidos para as diferentes amostras e diferentes comprimentos de onda podemos observar que as posições angulares e o número de picos não sofrem alteração. Este fato nos diz que os parâmetros da célula unitária e a simetria do cristal são praticamente os mesmos, independentemente da incorporação de cátíons Mn³⁺ e Ni²⁺. Cálculos precisos dos parâmetros da célula unitária revelam que há expansão dos parâmetros de rede a = b e contração do parâmetro de rede c do cristal de ADP dopado com Ni²⁺ e Mn³⁺. Nas medidas com ambos os comprimentos de onda no ADP:Mn o digrama Renninger apresenta picos com perfis semelhantes aos perfis dos picos nos diagrama Renninger do cristal de ADP puro. Nenhum pico extra aparece no diagrama Renninger do cristal dopado. A partir dos diagramas resultantes das medidas no cristal de ADP:Ni pode-se observar claramente: (i) alguns picos que tinham um perfil assimétrico no diagrama do cristal de ADP puro apresentam perfis quase totalmente simétricos no diagrama do cristal dopado com Ni (nas medidas com comprimento de onda abaixo da borda de absorção do Ni) e, (ii) alguns picos sofrem uma forte inversão em seus perfis (nas medidas com comprimento de onda acima da borda de absorção do Ni), por exemplo, o pico (5-12)/(-112), que representa um caso de quatro feixes. Estes resultados indicam que o diagrama Renninger com radiação Síncrotron é uma sonda de alta resolução a serem utilizados na incorporação de impurezas na rede ADP. Além disso, investigamos os coeficientes piezelétricos dos cristais de ADP:Mn, KDP:Mn e KDP:Ni por difração de raios-X à temperatura ambiente. Os resultados das medidas das reflexões 440 e 066 permitiram a obtenção dos coeficientes d₃₆ e d₂₅. Nós observamos que estes coeficientes aumentaram com a dopagem dos íons Mn³⁺ e Ni²⁺ nos cristais de ADP e KDP.

Color and shade parameters of ultramarine zeolitic pigments synthesized from kaolin waste

Ultramarine pigments were successful synthesized from zeolite A obtained from kaolin waste. This waste has been used as an excellent source of silicon and aluminum for zeolite synthesis because of its high kaolinite concentrations and low contents of other accessory minerals. The cost is naturally less than the industrialized product. Color additives (Sulfur and Sodium Carbonate) were mixed with different proportions of zeolite A and further calcined for 5 h at 500 °C. They were characterized by XRD and XRF in addition to visual classification by color and shade. These products show colors from blue to green at different shades, both influenced by the amount of additives and cooling rate after calcination. Thus, a different quantity of the same additives in the same zeolitic matrix provides an increase in the color intensity. Cooling rate after calcination induces the color change which is substantially important in the pigments production.

Inversion method for obtaining electrical parameters for soil in the rural region in Brazil

This paper presents an inversion methodology through weighted least squares to obtain the electrical parameters for the soil of a typical mid-western region in Brazil using the model based in the formalism of the parabolic equations to calculate the electric field intensity received. To validate this methodology, the results of the radio signal measurement campaign conducted in six radial routes leaving the city of Brasilia, Federal District, where the transmitter was located, were used. The measurements were compared to computer simulations and, thus, the optimal values for the electric conductivity and relative permittivity for the soil of the region could be estimated. Finally, a quantitative analysis of these parameters was performed with the values found in the literature, which demonstrated the effectiveness of the proposed methodology.

The columnar to equiaxed transition of horizontal unsteady-state directionally solidified Al-Si alloys

Experiments were conducted to investigate the influence of thermal parameters on the columnar to equiaxed transition during the horizontal unsteady-state directional solidification of Al-Si alloys. The parameters analyzed include the heat transfer coefficients, growth rates, cooling rates, temperature gradients and composition. A combined theoretical and experimental approach is developed to determine the solidification thermal variables considered. The increasing solute content in Al-Si alloys was not found to affect significantly the experimental position of the CET which occurred for cooling rates in the range between 0.35 and 0.64 K/s for any of three alloy compositions examined. A comparative analysis between the results of this work and those from the literature proposed to analyze the CET during upward vertical solidification of Al-Si alloys is reported and the results have shown that the end of the columnar region during horizontal directional solidification is abbreviated as a result of about six times higher thermal gradient than that verified during upward unidirectional solidification of alloys investigated.