3 resultados para Heavy fermions
em Universidade Federal do Pará
Resumo:
Estudos de minerais pesados provenientes em depósitos cauliníticos da Formação Ipixuna na região do rio Capim (Brasil) revelaram uma mineralogia matura a supermatura, representada dominantemente por zircão e turmalina e, subordinadamente, rutilo, cianita e estaurolita. Os minerais encontrados não variam muito, entretanto cada unidade caulinítica apresenta uma assinatura particular definida por diferenças nasproporções entre os principais minerais, assim como em suas características texturais. Este trabalho demonstrou que asunidades de caulim soft (inferior) e semi-flint (superior) podem ser consideradas seqüências deposicionais distintas. As altas percentagens de opacos em relação aos minerais transparentes e altos teores de zircão são diagnósticos da unidade caulinítica inferior. O incremento no volume de grãos de zircão e turmalina arredondados a subarredondados na unidade caulinítica superior sugere que esta inclui grãos que foram submetidos a um grau mais elevado de retrabalhamento. O aumento no volume de grãos não alterados de estaurolita e cianita na unidade superior leva a concluir que, além da reciclagem sedimentar, uma fonte distinta deve ser invocada. Estes resultados também mostram que as características da assembléia de minerais pesados da unidade intermediária são comparáveis com aqueles da unidade superior, o que sugere mesmo posicionamento estratigráfico.
Resumo:
In this work, a method was developed for the application of red mud, an alkaline leaching waste, from a bauxite processing plant located in northern Brazil (Amazon region) as starting material for heavy clay products. Samples were prepared by pressing blends of red mud and clay, which were then fired at temperatures from 900 ºC to 1190 ºC. Characterization was carried out by chemical analysis, differential thermal analysis (DTA) and X-ray diffraction (XRD), and the following ceramic properties were evaluated: water absorption, linear shrinkage and flexural strength. In order to evaluate the Na+ stability in the dense ceramic, leaching tests were also carried out on the specimens after sintering process. Results indicated that samples with 50 and 70 wt% of red mud are proper for being used in the production of ceramic bodies, due to its excellent properties, mainly high mechanical resistance and low water absorption, showing thus, an option to minimizing the environmental impacts caused by the aluminum industry.
Resumo:
Adsorption and regeneration of ion exchange resins were studied using a subcritical solution of a CO2-H2O mixture and a fixed bed column. The commercial Amberlite IRC-50/IRC-86 cation exchange resins and Amberlite IRA-67 anion exchange resin were tested for heavy metals (Pb, Cu, Cd) adsorption from a solution with different initial metal concentrations at different temperatures. After adsorption, the loaded resins were regenerated with water and carbon dioxide at different temperatures and a pressure of 25 MPa. The efficiency of the IRC-50 resin was lower than that of the IRC-86 resin for the adsorption of metals like Cd, Cu and Pb. Results obtained for desorption of these metals indicated that the process could be used for Cd and in principle for Cu. Sorption of metal ions depended strongly on feed concentration. Mathematical modeling of the metal desorption process was carried out successfully as an extraction process. For this purpose, the VTII Model, which is applied to extraction from solids using supercritical solvents, was used in this work.