Financiamento internacional para o setor agroindustrial no Mato Grosso: uma oportunidade para conservação?

Uma das principais tendências mundiais ligadas ao processo de globalização é a expansão da agroindústria nos trópicos úmidos. Embora a agroindústria seja uma importante fonte de renda para o Brasil, a sua expansão está levando ao deslocamento das populações locais e ao desmatamento extensivo da vegetação primária. Nesse contexto, enfocamos uma segunda tendência, também resultante da globalização, que consiste no movimento das instituições financeiras em direção à responsabilidade social e ambiental, evidenciado pela inclusão de condições socioambientais nos empréstimos para o setor agrícola. Nesse trabalho, examinamos a experiência de empréstimo da Corporação Financeira Internacional ao Grupo Maggi do Brasil analisando o potencial desse tipo de instrumento econômico para ajudar a reduzir os impactos negativos da expansão agroindustrial. Também é enfocado como os diferentes atores que participam desse debate (organizações não governamentais, indústrias, setor financeiro e governo) podem ajudar a otimizar esse potencial.

Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet

O objetivo deste trabalho foi realizar a caracterização físico-química e microbiológica do surimi obtido de resíduos da filetagem de piramutaba. Os resultados da caracterização físico-química dos resíduos e surimi foram: umidade (76,37 e 79,11%), lipídios totais (5,35 e 0,74%), proteínas (14,92 e 10,79%), cinzas (3,03 e 2,35%), pH (6,9 e 7,4), valor calórico (109,15 e 77,86 kcal.g^-1) e atividade de água (ambos 0,98), respectivamente. Os resultados dos valores de bases voláteis totais foi de 7,29 mgN/100^-1 g (resíduos) e carboidratos de 7,01% (surimi). Os valores de lipídios totais e proteínas foram reduzidos durante o preparo do surimi, provavelmente, devido a sucessivas lavagens durante o processamento. Os resíduos e o surimi foram analisados microbiologicamente estando em conformidade com os parâmetros exigidos. Os resultados mostraram que houve uma perda da cor vermelha (parâmetro a*) e amarela (parâmetro b*). Por outro lado, o parâmetro L* (luminosidade) aumentou após o processamento do surimi. Conclui-se que os resíduos de piramutaba podem ser empregados como matéria-prima de qualidade na elaboração de surimi e como fonte de nutrientes para a alimentação humana, constituindo-se também como uma alternativa para destino dos resíduos, antes lançados no ambiente.

Elementos traço em material particulado atmosférico de uma região agroindustrial do sudeste do Brasil

Trace element concentrations were measured in atmospheric particulate matter collected in 2009 and 2010, in a Brazilian region influenced by pre-harvest burning of sugar cane crops. For coarse particles, high concentrations of Al, Fe, K and Ca suggested that re-suspended soil dust was the main source of aerosol trace elements, subsequently confirmed by XRD analysis. High levels of K, Zn, As, Cd and Pb were found in fine particles, confirming the contribution of biomass burning and vehicle emissions, whereas Na, Al, K, Fe and Zn were the representative elements in ultrafine particles, influenced by a diversity of sources.

Color and shade parameters of ultramarine zeolitic pigments synthesized from kaolin waste

Ultramarine pigments were successful synthesized from zeolite A obtained from kaolin waste. This waste has been used as an excellent source of silicon and aluminum for zeolite synthesis because of its high kaolinite concentrations and low contents of other accessory minerals. The cost is naturally less than the industrialized product. Color additives (Sulfur and Sodium Carbonate) were mixed with different proportions of zeolite A and further calcined for 5 h at 500 °C. They were characterized by XRD and XRF in addition to visual classification by color and shade. These products show colors from blue to green at different shades, both influenced by the amount of additives and cooling rate after calcination. Thus, a different quantity of the same additives in the same zeolitic matrix provides an increase in the color intensity. Cooling rate after calcination induces the color change which is substantially important in the pigments production.

Synthesis and characterization of zeolite NaP using kaolin waste as a source of silicon and aluminum

The synthesis of zeolite NaP using kaolin waste, from the Amazon region, as a predominant source of silicon and aluminum has been studied. The zeolitisation process occurred in hydrothermal conditions using static autoclaving and the effects of time, temperature, and the Si/Al ratio were investigated. The starting material and the phases formed as reaction products were characterized by XRD, SEM and FTIR. The results showed that pure zeolite NaP is hydrothermally synthesized, at 100 °C for 20 hours, using metakaolin waste material in alkaline medium in presence of additional silica. The XRD and SEM analyses indicate that the synthesized zeolite presents good crystallinity.

Application of bauxite waste from amazon region in the heavy clay industry

In this work, a method was developed for the application of red mud, an alkaline leaching waste, from a bauxite processing plant located in northern Brazil (Amazon region) as starting material for heavy clay products. Samples were prepared by pressing blends of red mud and clay, which were then fired at temperatures from 900 ºC to 1190 ºC. Characterization was carried out by chemical analysis, differential thermal analysis (DTA) and X-ray diffraction (XRD), and the following ceramic properties were evaluated: water absorption, linear shrinkage and flexural strength. In order to evaluate the Na⁺ stability in the dense ceramic, leaching tests were also carried out on the specimens after sintering process. Results indicated that samples with 50 and 70 wt% of red mud are proper for being used in the production of ceramic bodies, due to its excellent properties, mainly high mechanical resistance and low water absorption, showing thus, an option to minimizing the environmental impacts caused by the aluminum industry.

Preliminary risk analysis applied to the handling of health-care waste

Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA) technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk) that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection) from pathogenic microorganisms, are shown.

Application of carbon composite adsorbents prepared from coffee waste and clay for the removal of reactive dyes from aqueous solutions

A novel carbon composite was prepared from a mixture of coffee waste and clay with inorganic:organic ratio of 1.3 (CC-1.3). The mixture was pyrolysed at 700 °C. Considering the application of this adsorbent for removal of anionic dyes, the CC-1.3 was treated with a 6 mol L^-1 HCl for 24 h to obtain ACC-1.3. Fourier transform infrared (FTIR), N₂ adsorption/desorption curves, scanning electron microscope (SEM) and powder X-ray diffractometry (XRD) were used for characterisation of CC-1.3 and ACC-1.3 carbon adsorbents. The adsorbents were effectively utilised for removal of reactive blue 19 (RB-19) and reactive violet 5 (RV-5) textile dyes from aqueous solutions. The maximum amounts of RB-19 dye adsorbed at 25 °C are 63.59 (CC-1.3) and 110.6 mg g^-1 (ACC-1.3), and 54.34 (CC-1.3) and 94.32 mg g^-1 (ACC-1.3) for RV-5 dye. Four simulated dye-house effluents were used to test the application of the adsorbents for treatment of effluents.