131 resultados para ENCEFALITIS MARGINAL


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente trabalho toma como objeto de estudo o discurso sobre a literatura marginal em blogs. A literatura marginal é um movimento literário que tem como tema central o relato da própria experiência de sobreviver nos espaços marginais e marginalizados da sociedade brasileira contemporânea. A vida na periferia, lugar este pouco representado pela literatura canônica, passa a ser extensão do que se escreve, deste modo, o autor assume de forma concreta seus distintivos traços artísticos, culturais e sociais. Tendo em vista a internet como instrumento de “democratização” da prática e do uso da palavra escrita, por conta da heterogeneidade dos discursos veiculados, a literatura marginal contemporânea encontra, neste espaço, a possibilidade para expor e divulgar seus discursos carregados de traços distintivos de hibridismo, contraditoriedade, além de propagar, por meio da linguagem coloquial, sua temática que possui um caráter coletivo e representa uma específica realidade brasileira. Nos blogs, mais especificamente, os escritores de literatura marginal encontram um espaço de divulgação de textos inéditos e de suas obras. Para a realização do estudo proposto, foram feitas considerações gerais sobre os blogs pesquisados, segundo uma abordagem dialógica do material de pesquisa. O corpus compõe-se de blogs de sujeitos que têm alguma relação com a literatura marginal contemporânea: o blog da editora literatura marginal (editoraliteraturamarginal.blogspot.com.br) e os blogs pessoais dos escritores Ferréz (ferrez.blogspot.com.br) e Sérgio Vaz (colecionadordepedras1.blogspot.com.br). Para a descrição/análise dos dados, foi feito um estudo bibliográfico de escritos bakhtinianos, que embasam teoricamente a pesquisa. Também foi desenvolvido um estudo bibliográfico de literatura marginal no Brasil... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente estudo teve como objetivos principais analisar a biodiversidade de macroinvertebrados bentônicos em diferentes pontos localizados no fundo da Lagoa do Mian, zona de desembocadura do rio Paranapanema, na Represa de Jurumirim, Estado de São Paulo. Nove pontos de amostragem ao longo da lagoa foram selecionados, distribuídos em três transectos. Cada transecto possuía um ponto na margem direita, um ponto na margem esquerda e um ponto no meio. As coletas foram realizadas em dois períodos do ano, um em março e outro em agosto, para fins de comparação. 2009 representou um ano atípico com relação aos níveis pluviométricos, ocorrendo chuvas intensas no período de julho (um mês tipicamente seco). Foram medidas as variáveis físico-químicas da água, tais como: transparência, profundidade, oxigênio dissolvido, pH, condutividade elétrica e temperatura. Foram recolhidas amostras do sedimento para análise da fauna bentônica e análise do sedimento (quantidade de matéria orgânica presente e granulometria) utilizando-se a draga de Petersen. O material foi triado sob microscópio estereoscópico. A seguir, foi feita a identificação e contagem dos indivíduos. Medidas de densidade, abundância relativa, riqueza, diversidade e equitabilidade foram calculadas. A análise mostrou maior abundância dos táxons no mês de agosto, apontando para a predominância de alguns grupos, como Chaoboridae, Nematoda, Oligochaeta e Chironomidae, este último apenas no segundo mês de coleta. A distribuição dos organismos foi mais significativamente influenciada pela a condutividade elétrica da água, pela transparência, pelo oxigênio dissolvido e por características do sedimento

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Odontologia - FOA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A metal coping may undergo changes during porcelain firing, which compromises its marginal adaptation. The use of NiCrTi alloy proposes to minimize this effect through the high melting point of titanium present in its composition. This study evaluated the influence of porcelain firing cycle on the marginal adaptation of NiCrTi copings in different preparation designs. Forty standardized metal dies were fabricated with the following combinations finish line/convergence of the axial walls: 1) shoulder/6°; 2) shoulder/20°; 3) sloping shoulder/6°; 4) sloping shoulder/20°. On each die a metal ceramic restoration coping was made. The die/coping set was stabilized with orthodontic elastics, divided into four equidistant areas with three measurement points each and a cementation pressure was simulated. The measurements were taken under a stereomicroscope (32×). After the first measurement, the copings were submitted to sintering cycles simulating porcelain application. For repeated measurements, the same procedures described above were performed. Data were submitted to Student’s-t test, 1-way ANOVA and Tukey´s test (α = 0.05). Adaptation means (µm) before and after porcelain firing in different preparations were: 1) 111.92 and 127.31; 2) 124.15 and 135.48; 3) 122.19 and 138.77; 4) 166.09 and 186.72; respectively. The porcelain firing impaired adaptation, regardless of the preparation design. The preparation in a 20° sloping shoulder provided a worse adaptation when compared with preparations that had 6° and 20° shoulder, which were statistically equal. The 6° sloping shoulder was statistically equal to the other three preparation designs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objective: The objective of this paper was to verify if the final irrigation at 17% EDTA, separately or followed by chlorhexidine digluconate at 2% interferes on the apical marginal leakage in root canal overfilling, due to the use of two root canal filling materials (Sealer 26TM or SealapexTM). Methods: Forty lower incisors extracted, with a single root canal, were biomechanically prepared, at 2.0mm beyond the radicular apex, with ProTaper SystemTM, finishing it with the F3 instrument. Irrigation was accomplished with 1.0 mL NaOCl at 2.5% at each change of equipment caliper and, in the end, with 5.0 mL normal saline solution. After achieving this procedure, the foraminal channels was standardized with a file K 25 until its DO appears in the foraminal opening. From this moment, the teeth were subdivided into two groups of 20 specimens each, because of the final irrigation method used: I – irrigation with EDTA at 17% for 3min and II – identical protocol, thus, after EDTA aspiration at17%, it was again irrigated with chlorhexidine digluconate at 2%, also kept intra-canal for 3min. Each group was again sub-divided into two sub-groups (ten teeth each), according to the cement used (Sealer 26TM or SealapexTM), and filled by using a single gutta-percha F1 (ProTaperTM, Universal Filling), in such a manner that it goes 2.0 mm beyond the radicular apex. Soon after that, the teeth were immersed in Rhodamine BTM for 72h, vacuum and after the roots have been bucolingually grooved, the leakages marked were measured with program Image ToolTM. Results and Conclusions: The leakage magnitude was similar among themselves (p > 0.05), except for group Sealapex®, thus the final use with chlorhexidine reduced apical leakage (p < 0.05).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sealer 26® cement contains bisphenol epoxy resin associated with calcium hydroxide, presenting smaller radiopacity than other endodontic cements. Aiming to improve this property, iodoform has been added in its composition. However, this addition's possible changes in physical and chemical properties still need to be studied. OBJECTIVE: To evaluate the apical sealing ability, solubility, and pH of Sealer 26® alone or with iodoform, at several proportions. MATERIAL AND METHODS: Three experimental mixtures of Sealer 26®, alone or with iodoform, were prepared and subjected to solubility test. Additionally, these combinations were inserted into polyethylene tubes and immersed in distilled water, and, their pH was evaluated after 24-h and 7-day periods. Subsequently, forty roots of extracted lower incisors subdivided into four groups of 10 specimens each, were retrograde filled with one of the previously described mixtures and gutta-percha points. The roots were immersed in Rhodamine B, under vacuum, for 72 hours. After this period, the specimens were longitudinally sectioned, root fragments photographed, these images scanned, and apical infiltration measured by Image tool software. The obtained data were subjected to statistical analysis, at a significance level of 5%. RESULTS: Marginal leakage and solubility tests did not show any difference among the experimental groups (p > 0.05). pH analysis was only statistically different at 24-h period and between Sealer 26® alone and 1.1g iodoform group (p < 0.05). CONCLUSION: The presence of iodoform in Sealer 26®, at the used proportions, did not alter the solubility, apical marginal leakage and pH properties of the original cement.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study sought to assess the use of chlorhexidine with several excipients as a dentin surface treatment and its effect on marginal adaptation of class V restorations with current-generation dentin bonding agents. A total of 120 human third molars were selected and allocated into 12 groups, with standardized buccal class V restorations randomly divided into preconditioned dentin rinsed with: water; water + chlorhexidine; ethanol; or ethanol + chlorhexidine. After rinsing of dentin (previously conditioned with 35% phosphoric acid) with the test solutions, the Adper single bond 2, prime and bond 2.1, and Excite bonding systems were applied randomly. Restorations were performed with FiltekTM Z350 XT composite resin. The resulting specimens were subjected to thermal and mechanical load cycling. Quantitative analysis of marginal adaptation was performed on epoxy replicas by means of scanning electron microscopy. Results were assessed by means of the Kruskal-Wallis test (percentages of continuous margins) and Wilcoxon test (differences between percentages of continuous margins before and after thermal cycling and mechanical loading), at a significance level of p < 0.05. Outcomes in the chlorhexidine-treated groups were not superior to those obtained with other treatments.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to investigate the reliability of visual and digital methods to assess marginal microleakage in vitro. Materials and Methods: Typical Class V preparations were made in bovine teeth and filled with composite resin. After dye penetration (0.5% basic fuchsin), teeth were sectioned and the 53 obtained fragments were assessed according to visual (stereomicroscope) and digital methods (Image Tool Software ® -ITS) (University of Texas Health Science Center-San Antonio Dental School, USA). Two calibrated examiners (A and B) evaluated dye penetration, by means of a stereomicroscope with ×20 magnification (scores), and by the ITS (millimeters). The intra- and inter-examiner agreement was estimated according to Kappa statistics (κ), and intraclass correlation coefficient (ρ). Results: In relation to the visual method, the intra-examiner agreement was almost perfect (κA = 0.87) and substantial (κB = 0.76), respectively to the examiner A and B. The inter-examiner agreement showed an almost perfect reliability (κ = 0.84). For the digital method, the intra-examiner agreement was almost perfect for both examiners and equal to ρ = 0.99, and so was the inter-examiner agreement value. Conclusion: Visual (stereomicroscope) and digital methods (ITS) showed high levels of intra- and inter-examiner reproducibility when marginal microleakage was assessed.