Parâmetros Genéticos para a Produção de Leite, Gordura e Proteína em Bubalinos

The objective of this study was to estimate the genetic parameters affecting milk production (MP), fat (%F) and protein (%P) contents of buffalo milk. Restricted Maximum Likelihood (REML) using MTDFREML program under animal model analyzed a total of 1744 lactations records from 1268 cows. The means were: MP = 1259.47 +/- 523.09 kg, %F = 6.87 +/- 0.88% and %P = 3.91 +/- 0.61%. The estimates of repeatability and heritability coefficients were: MP = 0.38 and 0.24, %F = 0.28 and 0.21 and %P = 0.30 and 0.26, respectively. The estimated genetic and phenotypic correlations were MP x %F = -0.18 and -0.62, MP x %P = -0.23 and -0.59 and %F x %P = 0.50 and 0.77, respectively. According to these results it is possible to conclude that selection is a proper way to increase milk yield, fat and protein percentage. Although negative low values of genetic correlations among traits, it should be take into account that simultaneous selection based on these traits could not be so efficient.

Insects on decomposing carcasses of small rodents in a secondary forest in Southeastern Brazil

The decomposition of small carcasses in the open is frequently neglected although it may provide information of forensic importance. This paper describes an experimental study of arthropod species associated with carcasses of mouse, Mus musculus (Linnaeus, 1758) and rat, Rattus norvegicus (Berkenhout, 1769) (Rodentia: Muridae). Four carcasses were left inside iron cages in sunlit and shady areas in a secondary forest in Southeastern Brazil twice a season for four seasons (n = 16 carcasses of each rodent). The carcasses were removed when arthropods ceased to visit them. The visiting and colonizing invertebrates were collected daily and identified. Immatures were also collected and reared in a laboratory for identification. We collected 6,514 arthropods (820 adults and 5,694 juvenile forms) belonging to 53 species from the families Sarcophagidae, Calliphoridae, Muscidae, Fanniidae, Syrphidae, Richardiidae, Sepsidae, Micropezidae, Otitidae, Drosophilidae, Phoridae, Dolichopodidae, Anthomyiidae, Asilidae and Lauxaniidae (Diptera), Formicidae, Ichneumonidae, Encyrtidae and Apidae (Hymenoptera), Staphylinidae (Coleoptera) and Gonyleptidae (Opiliones). Lucilia eximia (Wiedemann, 1819) (Diptera: Calliphoridae) and Peckia (Pattonella) intermutans (Walker, 1861) (Diptera: Sarcophagidae) deserve special attention because both adult and immature forms were collected in all seasons and in both areas. Our results indicate that the frequency of occurrence of these arthropods was positively associated with carcass size (mouse or rat); no marked insect succession on the carcasses occurred; and the diversity of Calliphoridae and Sarcophagidae was high, irrespective of season.

Ant diversity (Hymenoptera: Formicidae) and predation by ants on the different stages of the sugarcane borer life cycle Diatraea saccharalis (Lepidoptera: Crambidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis of the testes and spermatogenesis in species of the family Pentatomidae (Heteroptera)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Valor nutritivo do feno de Brachiaria decumbens Stapf cv. Basilisk submetido a tratamento com amônia anidra ou uréia

The effects of the ammoniation of Brachiaria decumbens hay was evaluated. The hay bales were distributed into a complete randomized block design, with four replications and they were submitted to the treatments: untreated or treated with anhydrous ammonia (NH3)(2,0 and 3,0% of the DM) or with urea (3,6 and 5,4% of the DM). All the hays bales remained under plastic cover for 45 days. After three days of aeration, samples were collected for the determination of the chemical composition, nitrogenous compounds fraction and the in vitro dry matter (IVDDM) and organic matter (IVDOM) digestibility. In the metabolic study, Saanen goats breed was used in a 5x5 Latin squares design, where the apparent digestibility, the voluntary intake and the nutritive value index were evaluated. The ammoniation increased the contents of the total N, N ammonia (N-NH3) and non-protein N, with high effect on the levels of 3,0% of NH3 and 5,4% of urea. There were no differences between the level of 3,0% of NH3 and 5,4% of urea for the total N, N-NH3 and NPN. However, the treatment with 3,0% of NH3 allowed a larger fixation of N in ADIN and NDIN forms. The ammoniation increased the IVDMD and IVDMO and reduced the contents of neutral detergent fiber (NDF), hemicellulose, acid detergent fiber (ADF) and lignin, but it did not alter the cellulose and gross energy contents. The ammoniation increased the DM, OM, CP, NDF, ADF, hemicellulose, cellulose and gross energy apparent digestibility and as well as the voluntary intake of DM, digestible DM, digestible OM, digestible protein, digestible energy and the nutritive value index. The ammoniation increased the hay nutritive value index, but there were no differences between the levels of NH3 and urea.

Avaliação de um Sistema de Produção de Gado de Corte. 1. Desempenho Reprodutivo

Data from 1983 through 1991 on reproductive performance, collected from the Beef Cattle production system at Embrapa Gado do Corte, were analyzed. This system, based on exclusive grazing, presented a pregnancy rate (2-3 years old heifers and cows) of 75.9%. The others observed index were first calving reconception rate, 62.1%, total herd loss rate, 2.2%, and calf loss rate until weaning, 6.0%. The calf loss rate represented 53.7% of the total herd loss rate. For calf loss rate (CLR) data analysis, the used model included the effects of sex (S), calf birth year (ANB), cow birth year (ANV) and the interactions between S x ANB and ANV x ANB. Sex had a significant effect on CLR, with 8.1 and 3.8% for male and female loss rate, respectively. For calving interval analysis, the used model included the following fixed effects: ANV, birth month of cow (MNV), birth cow order when it was a calf (OPV) and the ANV x MNV interaction. The 205-day cow weight and her age at first calving were used as covariables. The calving interval was 463.45 days (15.2 mo), ranging from 388 to 543 days, and it was significantly affected by ANV. It is suggested that more research attention should be directed to the highest loss rate observed for male calves, which represent higher commercial value than females.

Digestibilidade Aparente e Efeito Macro-Microscópico em Tilápia do Nilo (Oreochromis niloticus) Arraçoadas com Torta de Dendê

To evaluate the nutritional value of palm kernel meal on the performance Nile tilapia (Oreochromis niloticus), five isonitrogenous (30% crude protein), isoenergetic (2800 kcal/kg of digestible energy), and isofibrous (10% crude fiber) diets, with increasing levels of palm kernel meal (0, 7, 14, 21, 28 and 35%). were ad libitum fed to fingerlings with initial body weight of 1.52g +/- 0.04, housed per 120 days in 35 aquarium of 60 liters with fingerlings each. The environmental culture condition were monitored during all experimental period. Statistical analyses of recorded data were performed through polynomial regression models. To determine the apparent digestibility, macroscopic analysis of viscera and microscopic analysis of intestine epithelium were performed. The obtained results indicated that the inclusion of palm kernel meal up to 35% Nile tilapia diets did not affects the apparent digestibility and did not induce any pathological effects on viscera and intestinal epithelium.

Determining the season of death from the family composition of insects infesting carrion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Three-dimensional modeling and highly refined mesh generation of the aorta artery and its tunics

This paper describes strategies and techniques to perform modeling and automatic mesh generation of the aorta artery and its tunics (adventitia, media and intima walls), using open source codes. The models were constructed in the Blender package and Python scripts were used to export the data necessary for the mesh generation in TetGen. The strategies proposed are able to provide meshes of complicated and irregular volumes, with a large number of mesh elements involved (12,000,000 tetrahedrons approximately). These meshes can be used to perform computational simulations by Finite Element Method (FEM). © Published under licence by IOP Publishing Ltd.

Caracterização molecular do arco da alça V3 da gp 120 do HIV-1

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Roteiros e produção de conteúdos interativos para celulares nos cursos de educação a distância na televisão digital interativa

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Design instrucional: uma abordagem do design gráfico para o desenvolvimento de ferramentas de suporte à Educação a Distância

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Subsídios metodológicos para o desenvolvimento de repertórios de interpretação funcional para uma professora das séries iniciais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A inserção do assistente social na equipe saúde da família no município de Uberaba - MG

Pós-graduação em Serviço Social - FCHS

Projetos Minerva: caixa de jogos caleidoscópica

Pós-graduação em Educação para a Ciência - FC