Organização das comunidades infestantes de plantas daninhas na cultura da cana-de-açúcar em agrupamentos-padrão

O objetivo deste estudo foi avaliar a possibilidade de agrupar talhões de cana-de-açúcar colhida mecanicamente e sem queima prévia da palha na região de Ribeirão Preto-SP, de acordo com o potencial de infestação de plantas daninhas, por meio de análise de agrupamento por método hierárquico e outras técnicas de análise multivariada, utilizando como variável o índice de infestação relativa atribuído por avaliações visuais, em duas etapas. A primeira contemplou 20 talhões de cana-planta com ciclo de 18 meses; essas áreas foram utilizadas para comparação de dois métodos de estimativa da composição específica da flora daninha: análise fitossociológica e por meio da porcentagem visual de cobertura geral (CG) e específica (CE). A segunda etapa consistiu no levantamento da composição específica da comunidade de plantas daninhas em 189 talhões, em áreas de cana-soca colhidas durante a safra de 2008, incluindo nesses talhões apenas CG e CE. Com as informações sobre os levantamentos da comunidade infestante foi construído um banco de dados, posteriormente submetido a análises exploratórias por técnicas de estatística multivariada. Para as principais espécies dentro dos talhões, que foram DIGNU, ARACH, IPOHF, MRRCI e IPOQU, seguidas de CYPRO, ELEIN e EPHHS, foram verificados 75% de coincidências de resultados entre os dois métodos de avaliação. Também notou-se que as avaliações visuais de porcentagem de cobertura das espécies podem substituir, para fins de praticidade, agilidade e aplicabilidade, as avaliações fitossociológicas, uma vez que proporcionaram boa capacidade de detecção das principais plantas daninhas dentro de cada talhão. As técnicas de estatística multivariada demonstraram que os talhões podem ser agrupados de acordo com semelhanças na intensidade da infestação e na composição específica.

Direct observation of the strange b baryon Xi(-)(b)

We report the first direct observation of the strange b baryon Xi(-)(b)(Xi) over bar (+)(b)). We reconstruct the decay Xi(-)(b)-->J/psi Xi(-), with J/psi-->mu(+)mu(-), and Xi(-)-->Lambda pi(-)-->p pi(-)pi(-) in p (p) over bar collisions at root s = 1.96 TeV. Using 1.3 fb(-1) of data collected by the D0 detector, we observe 15.2 +/- 4.4(stat)(-0.4)(+1.9)(syst) Xi(-)(b) candidates at a mass of 5.774 +/- 0.011(stat) +/- 0.015(syst) GeV. The significance of the observed signal is 5.5 sigma, equivalent to a probability of 3.3 x 10(-8) of it arising from a background fluctuation. Normalizing to the decay Lambda(b)-->J/psi Lambda, we measure the relative rate sigma(Xi(-)(b))xB(Xi(-)(b)-->J/psi Xi)/ sigma(Lambda(b))xB(Lambda(b)-->J/psi Lambda) = 0.28 +/- 0.09(stat)(-0.08)(+0.09)(syst).

Is maximal lactate steady state during intermittent cycling different for active compared with passive recovery?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Concentração, proporção molar e taxa de produção de ácidos graxos voláteis (AGV) no rúmen de bovinos alimentados com diferentes níveis de concentrado na dieta

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização da erosão hídrica laminar do solo em bacia hidrográfica com base na malha fundiária, por meio de sensoriamento remoto, geoprocessamento e modelagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do treinamento de caminhada com restrição do fluxo sanguíneo sobre economia de corrida em indivíduos ativos

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Comparison of polymers and ceramics in new and discarded electrical insulators: reuse and recycling possibilities

The expansion and maintenance of electricity distribution networks generates large amounts of waste, much of it in the form of discarded insulators that are not reused or recycled. This paper describes the results of tests on used and new ceramic and polymeric insulators to verify if their exposure to weathering justifies their replacement. In new and used ceramic insulators, properties such as contact angle, relative density, porosimetry, dilatometry and X-ray diffraction patterns showed no differences or the differences that were found could not be related to their use. The discarded ceramic material showed high thermal stability, an interesting characteristic for application as chamotte. It can also be reused to replace gravel used in substations. In polymeric insulators, thermogravimetry, differential scanning calorimetry and relative density test results suggest degradation of used material compared to new. This would justify their replacement and discard as waste, but they show little recycling potential.

Estimation of Maximal Work Rate Based on the 6-Minute Walk Test and Fat-Free Mass in Chronic Obstructive Pulmonary Disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

POSITIONING DURING RESISTANCE ELBOW FLEXOR EXERCISE AFFECTS ELECTROMYOGRAPHIC ACTIVITY, HEART RATE, and PERCEIVED EXERTION

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

THE RATE of FORCE DEVELOPMENT OBTAINED AT EARLY CONTRACTION PHASE IS NOT INFLUENCED BY ACTIVE STATIC STRETCHING

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Measurement of the relative prompt production rate of chi(c2) and chi(c1) in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Endurance training does not change the relative intensity at lactate threshold in elderly

Aim. The aim of the study was to verify whether endurance training may induce changes on the percentage of peak heart rate (% peak HR) at the lactate threshold (LT) intensity in untrained elderly. Methods. Sixteen healthy men (64.3 ± 4.1 yrs) underwent an incremental test on cycloergometer to determine the LT and the corresponding % peak HR at LT intensity. Afterwards, they were randomly distributed into two groups (n = 8 each): endurance training (ET) and control (C). The ET exercised 3 days a week for 12 weeks. The training session was divided into warm-up (5 min at 50% of LT;), a main part, and a cool-down (5 min 50% below of LT). The main part had a gradual increased volume through the weeks of 2 min. The initial volume on the 1st week was 25 min reaching 47 min at the 12th week. The relative intensity was kept constant (90 to 100% of LT). Results. After 12 weeks, the % peak HR at LT did not change significantly for both groups P > 0.05 (ET 82.9 ± 4.1 vs. 82.5 ± 3.4 and Ç 80.2 ± 7.1 vs. 81.8 ± 7.1). Conclusion. We conclude that endurance training proposed does not change the relative intensity at LT in elderly.

Comparison of body size, relative growth and size at onset sexual maturity of Uca uruguayensis (Crustacea: Decapoda: Ocypodidae) from different latitudes in the south-western Atlantic

Some crustaceans show variations of their reproductive biology within their geographical distribution, and knowledge about such variations is important for the comprehension of their reproductive adaptations. This study compared two populations of the fiddler crab Uca uruguayensis from two locations on the south-western Atlantic coast: Ubatuba Bay, São Paulo, Brazil and Samborombón Bay, Buenos Aires, Argentina. The population features analysed were the body size variation (carapace width = CW) and the size at the onset of sexual maturity (SOM) in order to test the hypothesis that the size at SOM, should be the same in relative terms (RSOM), independently of the latitudinal position. In the Brazilian population the CW ranged from 4.18 to 11.60 mm for males and 3.90 to 9.80 mm for females, and in the Argentinean population from 3.60 to 14.10 mm for males and 2.85 to 12.00 mm for females. In the Brazilian population the SOM was 7.1 (RSOM = 0.58) and 5.9 mm CW (RSOM = 0.57) for males and females, respectively, and in the Argentinean population it was 7.0 (RSOM = 0.42) and 6.75 mm CW (RSOM = 0.53) for males and females, respectively. This fact is probably related to a great plasticity in the life history features of Uca uruguayensis under different environmental conditions. © 2012 Marine Biological Association of the United Kingdom.

PLA and Organoclays Nanocomposites: Degradation Process and Evaluation of ecotoxicity Using Allium cepa as Test Organism

In this study, nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by the melt intercalation method and the obtained samples were characterized by transmission electron microscopy (TEM). Since composting is an important proposal to the final disposal of biopolymers, the influence of clays on the hydrolytic degradation process of PLA was evaluated by visual analysis and monitoring of molecular weight after periods of 15 and 30 days of degradation in compost. After degradation of the materials in composting environment, the evaluation of cytotoxic, genotoxic and mutagenic effects of compost aqueous extract was carried out using a bioassay with Allium cepa as test organism. The TEM micrographs permitted the observation of different levels of dispersion, including exfoliated regions. In the evaluation of hydrolytic degradation it was noted that the presence of organoclays can decrease the rate of degradation possibly due to the barrier effect of clay layers and/or the higher degree of crystallinity in the nanocomposite samples. Nevertheless, even in the case of nanocomposites, the molecular weight reduction was significant, indicating that the composting process is favorable to the chain scission of PLA in studied materials. In the analysis performed by the bioassay using A. cepa as test organism, it was found that after degradation of the PLA and its nanocomposites the aqueous extract of compost samples induced a decreasing in the mitotic index and an increasing in the induction of chromosomal abnormalities. These results were statistically significant in relation to the negative control (distilled water). By comparing the results obtained for the nanocomposites in relative to pure polymer, there were no statistically significant differences. The types of the observed chromosomal aberrations indicated a possible genotoxic effect of the materials, which may be related to an aneugenic action of PLA degradation products. © 2013 Springer Science+Business Media New York.

Test-retest reliability of a 3-min isokinetic all-out test using two different cadences

Objectives: To investigate the test-retest reliability of mechanical parameters derived from a 3-min isokinetic all-out test, performed at 60 and 100 rpm. Reliability and validity of the peak oxygen uptake derived from 3-min isokinetic all-out test were also tested. Design: 14 healthy male subjects completed an incremental ramp testing and four randomized 3-min isokinetic all-out test (two at 60 rpm and two at 100 rpm). Methods: The absolute and relative reliability of the following parameters were analyzed: peak power, mean power, end power, fatigue index, work performed above end power and peak oxygen uptake. Results: No difference was found between each two sets of data, although there were between-cadence differences for peak power, mean power, end power, and fatigue index. Higher intra-class correlation (ICC) and lower coefficient of variation (CV) were found for end power (ICC = 0.91 and 0.95; CV = 5.6 and 5.7%) and mean power (ICC = 0.97 and 0.98; CV = 2.4 and 3.1%), than for peak power (ICC = 0.81 and 0.84; CV = 8.7 and 10%) and work performed above end power (ICC = 0.79 and 0.84; CV = 7.9 and 10.6%; values reported for 60 rpm and 100 rpm, respectively). High reliability scores were also observed for peak oxygen uptake at both cadences (60 rpm, CV = 3.2%; 100 rpm, CV = 2.3%,) with no difference with the incremental ramp testing peak oxygen uptake. Conclusions: The power profile and peak oxygen uptake of a 3-min isokinetic all-out test are both highly reliable, whether the test is performed at 60 or 100 rpm. Besides, peak oxygen uptake and work performed above end power were not affected by the change in cadence while peak power, mean power, end power, and fatigue index were. © 2013.