Sistema de aterramento com cabo contrapeso representado por linhas de transmissão implementado em Matlab com circuitos em cascatas de PÍ

Pós-graduação em Engenharia Elétrica - FEIS

Probabilistic neural network to predict cracks in taphole mud used in blast furnaces

One of the major problems facing Blast Furnaces is the occurrence of cracks in taphole mud, as the underlying causes are not easily identifiable. The absence of this knowledge makes it difficult the use of conventional techniques for predictability and mitigation. This paper will address the application of Probabilistic Neural Network using the Matlab software as a means to detect and control such cracks. The most relevant BF operational variables were picked through the statistic tool "Principal Component Analysis - PCA." Based upon the selection of these variables a probabilistic neural network was built. A set of BF operational data, consisting of 30 controlling variables, was divided into 2 groups, one of which for network training, and the other one to validate the neural network. The neural network got 98% of the cases right. The results show the effectiveness of this tool for crack prediction in relation to clay intrinsic properties and as a result of the fluctuation in operational variables.

Aplicação de redes neurais artificiais no monitoramento da operação de dressagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de absorvedores de vibrações eletromecânicos lineares e não-lineares em sistemas não-lineares e não-ideais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem matemática e análise dinâmica da torre de um pulverizador de pomares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de lâminas serrilhadas no corte basal da cana-de- açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Lógica Fuzzy aplicada ao controle de um sistema híbrido de geração de energia elétrica: eólica, fotovoltaica e biogás

Pós-graduação em Engenharia Mecânica - FEG

Modelos lineares de sistemas elétricos de potência: um estudo comparativo

Pós-graduação em Engenharia Elétrica - FEIS

Análise comparativa dos sistemas de jogo e das ações técnicas realizadas pela seleção brasileira de futebol

Since its origin, soccer has been conquering followers all over the world. As a consequence of this cultural phenomenon, countless works are being done aiming to analyze the game systems and the fundamentals carried out by a team. The purpose of this paper is to analyze the Brazilian Soccer Team’s game systems and actions with ball possession in the 1958, 1962 and 2002 World Cup finals. Specifically, the paper analyzed the actions that occur during the match, such as control, dribble, pass, shot, foul and tackling. In order to achieve that, the Skout software (Barros et al., 2006) was utilized and, through it, all fundamentals carried out by the Brazilian team were identified and codified in a virtual field. The data from each match was transported into the Matlab® software, in which the zone of major action of each player was analyzed, represented by the main axis. The outcome showed that the game systems put into practice by the Brazilian team in the 1958 and 1962 World Cup finals didn’t present significant changes, nevertheless, regarding the 2002 final, there was a great difference. The Brazilian team got similar percentages in the technical actions carried out in the three World Cup finals analyzed, however, in absolute numbers, the passes, the shots and the dribbles decreased while the fouls increased.

Estudo e aplicação de diferentes métodos de resolução para problemas dinâmicos não-lineares em presença de atrito

The friction phenomena is present in mechanical systems with two surfaces that are in contact, which can cause serious damage to structures. Your understanding in many dynamic problems became the target of research due to its nonlinear behavior. It is necessary to know and thoroughly study each existing friction model found in the literature and nonlinear methods to define what will be the most appropriate to the problem in question. One of the most famous friction model is the Coulomb Friction, which is considered in the studied problems in the French research center Laboratoire de Mécanique des Structures et des Systèmes Couplés (LMSSC), where this search began. Regarding the resolution methods, the Harmonic Balance Method is generally used. To expand the knowledge about the friction models and the nonlinear methods, a study was carried out to identify and study potential methodologies that can be applied in the existing research lines in LMSSC and then obtain better final results. The identified friction models are divided into static and dynamic. Static models can be Classical Models, Karnopp Model and Armstrong Model. The dynamic models are Dahl Model, Bliman and Sorine Model and LuGre Model. Concerning about nonlinear methods, we study the Temporal Methods and Approximate Methods. The friction models analyzed with the help of Matlab software are verified from studies in the literature demonstrating the effectiveness of the developed programming

Estimação de parâmetros de linhas de transmissão utilizando técnicas de decomposição modal: Aplicação em linhas com plano de simetria vertical

Pós-graduação em Engenharia Elétrica - FEIS

Identificação de funções de transferência de ordem fracionária utilizando como entrada um degrau

Pós-graduação em Engenharia Elétrica - FEIS

Image segmentation using morphological watershed applied to cartography

Image segmentation is a process frequently used in several different areas including Cartography. Feature extraction is a very troublesome task, and successful results require more complex techniques and good quality data. The aims of this paper is to study Digital Image Processing techniques, with emphasis in Mathematical Morphology, to use Remote Sensing imagery, making image segmentation, using morphological operators, mainly the multi-scale morphological gradient operator. In the segmentation process, pre-processing operators of Mathematical Morphology were used, and the multi-scales gradient was implemented to create one of the images used as marker image. Orbital image of the Landsat satellite, sensor TM was used. The MATLAB software was used in the implementation of the routines. With the accomplishment of tests, the performance of the implemented operators was verified and carried through the analysis of the results. The extration of linear feature, using mathematical morphology techniques, can contribute in cartographic applications, as cartographic products updating. The comparison to the best result obtained was performed by means of the morphology with conventional techniques of features extraction. © Springer-Verlag 2004.

Novas condições de estabilidade de sistemas não lineares utilizando funções de Lyapunov fuzzy

Pós-graduação em Engenharia Elétrica - FEIS

Análise da assimetria nas ações motoras em atletas profissionais de futsal

Lateral asymmetries are in everywhere as well as in all movements made by man, which become more evident in movements of sport. The asymmetry is particularly pointed out in futsal when players, even with clear opportunity of making use of their non-preferred foot, try to place the ball in order to execute the action with their preferred foot. The study of asymmetry in futsal is quite relevant, once ambidextrous players present advantages in their performances during a match, which can help futsal athletes not only in their performance improvement but also with the prescription of training. For this reason, the present study had questioned: is there symmetry/asymmetry at the performance of lower contralateral limbs during actions with the possession ball (pass, receiving a ball and kick into the goal) during a futsal match? Thus, the aim of this study was to analyze the symmetry/asymmetry using the preferred and non-preferred foot in actions with the possession ball (pass, receiving and shoot) in adult Futsal's players (professional). The winner team of eight matches of the 2012 FIFA Futsal World Cup was analyzed. An average of 75 players had all their actions (pass, receiving a ball and shot on goal) using their lower limbs during the match analyzed. However, their actions with the head and torso were not analyzed. The games were acquired through a television broadcast. All eight matches were followed by an appraiser through a computer. The Skout® software was used to collect the data, taking notes of the player involved, the type of action (pass, receiving a ball and shot on goal), its foot used (preferred or non-preferred foot) and if the execution was correct or wrong. These data were saved in a text file, in the form of a matrix and imported into the Matlab® software, where was analyzed the following parameters: frequency of occurrence of each action with each foot and quantity of correct and wrong occurrences performed with...