Improvement and evaluation of the MS2SV for mixed systems design described in abstraction high level

This paper presents an important improvement of the MS2SV tool. The MS2SV performs the translation of mixed systems developed in MATLAB / Simulink for a structural or behavioral description in VHDL-AMS. Previously, the MS2SV translated only models of the LIB MS2SV library. This improvement allows designer to create your own library to translation. As case study was used a rudder controller employed in an unmanned aerial vehicle. For comparison with the original model the VHDL-AMS code obtained by the translation was simulated in SystemVision environment. The results proved the efficiency of the tool using the translation improvement proposed in this paper.

Performance, carcass characteristics and gain cost of feedlot cattle fed a high level of concentrate and different feed additives

The objective of this study was to evaluate the effects of feeding cattle with isoprotein and isoenergetic diets, with and without the addition of polyclonal antibody preparation (PAP), yeasts (YST) or monensin sodium (MON) on performance, carcass characteristics and gain cost in feedlot. Ninety-five 20-month old bullocks (323.3±21.8 kg) were distributed in 25 pens. The completely randomized experimental design had a 2 × 2 + 1 factorial arrangement and the treatments were replicated 5 times. There was no effect of MON for DMI throughout the feedlot period; however, MON reduced the dry matter intake (DMI) in g/kg of BW in the first 28 days when compared with the other treatments. The gain cost decreased with MON addition in relation to the other treatments. Inclusion of YST decreased average daily gain (ADG), final body weight, hot carcass weight, carcass weight, gain to feed ratio and DMI in g/kg body weight, worsening feed conversion and increasing the gain cost in the feeding periods. Inclusion of PAP increased ADG and decreased the gain cost, besides improving feed conversion. For MON and PAP, a difference was found for kidney-pelvic fat and kidney-pelvic fat per 100 kg of hot carcass weight. For MON and YST, there was a difference in ADG, feed conversion, gain cost and carcass yield and kidney-pelvic fat per 100 kg of hot carcass. Treatment YST worsened performance in relation to the non-supplemented treatments. Feeding PAP to animals did not influence performance and carcass characteristics of bullocks in feedlot negatively. Thus, PAP shows potential to substitute MON in cattle feeding using isoprotein and isoenergetic diets.

High-level production of functional muscle alpha-tropomyosin in Pichia pastoris

Although numerous studies have reported the production of skeletal muscle alpha -tropomyosin in E. coli, the protein needs to be modified at the amino terminus in order to be active. Without these modifications the protein does not bind to actin, does not exhibit head-to-tail polymerization, and does not inhibit the actomyosin Mg2+-ATPase in the absence of troponin. on the other hand, the protein produced in insect cells using baculovirus as an expression vector (Urbancikova, M., and Hitchcock-DeGregori, S. E., J. Biol. Chem., 269, 24310-24315, 1994) is only partially acetylated at its amino terminal and therefore is not totally functional. In an attempt to produce an unmodified functional recombinant muscle alpha -tropomyosin for structure-function correlation studies we have expressed the chicken skeletal alpha -tropomyosin cDNA in the yeast Pichia pastoris. Recombinant protein was produced at a high level (20 mg/L) and was similar to the wild type muscle protein in its ability to polymerize, to bind to actin and to regulate the actomyosin S1 Mg2+-ATPase. (C) 2001 Academic Press.

NH3+N2O3 reaction. High level calculations

We have undertaken a comprehensive study of the NH3 + N2O3 reaction in gas phase. Total energies of reactants, intermediates, transition states, and products have been calculated at CBS-QB3 level of theory. The corresponding BSSE analysis were performed at the highest level of theory, i.e. MP2 using the complete basis set (CBS) extrapolation at CBS-QB3 optimized geometries. A detailed mechanism was proposed for 2NH(3) - N2O3 -> 2N(2) - 3H(2)O with Delta H-r= - 170.08 kcal/mol N-2. (c) 2005 Elsevier B.V. All rights reserved.

Phylogenetic analysis reveals a high level of speciation in the Paracoccidioides genus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Application of a serum/protein-free medium for the growth of mammalian cell lines and high level production of classical, variant and very virulent strain of infectious bursal disease virus (IBDV)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Commissioning of the CMS High-Level Trigger with cosmic rays

The CMS High-Level Trigger (HLT) is responsible for ensuring that data samples with potentially interesting events are recorded with high efficiency and good quality. This paper gives an overview of the HLT and focuses on its commissioning using cosmic rays. The selection of triggers that were deployed is presented and the online grouping of triggered events into streams and primary datasets is discussed. Tools for online and offline data quality monitoring for the HLT are described, and the operational performance of the muon HLT algorithms is reviewed. The average time taken for the HLT selection and its dependence on detector and operating conditions are presented. The HLT performed reliably and helped provide a large dataset. This dataset has proven to be invaluable for understanding the performance of the trigger and the CMS experiment as a whole. © 2010 IOP Publishing Ltd and SISSA.

Finding best urban routes based on analyses of high level and IOPT Petri net models

This paper presents a tool that combines two kinds of Petri Net analyses to set the fastest routes to one vehicle in a bounded area of traffic urban. The first analysis consists of the discovery of possible routes in a state space generated from an IOPT Petri net model given the initial marking as the vehicle position. The second analysis receives the routes found in the first analysis and calculates the state equations at incidence matrix created from the High Level Petri net model to define the fastest route for each vehicle that arrive in the roads. It was considered the exchange of information between vehicle and infrastructure (V2I) to get the position and speed of all vehicles and support the analyses. With the results obtained we conclude that is possible optimizing the urban traffic flow if this tool is applied to all vehicles in a bounded urban traffic. © 2012 IEEE.

The canonical correlation between the biological markers of performance and physical fitness in high level judo athletes

The objective of this research was to verify the relationship between biological markers of performance of elite judo athletes and performance in different physical fitness tests. Twenty-one judo athletes were involved in the present observational and correlational study. Dermatoglyphic variables and the 2D:4D digit ratio were considered as biological markers, while the physical fitness variables analyzed were body fat, maximal strength, muscular power, the aerobic and anaerobic profile, and performance in specific tests. The statistics involved canonical correlations and a multivariate technique. A high and significant canonical correlation was observed between groups of variables, the first expressed by 1=0.999 (p<0.0001) and the second by 2=0.997 (p<0.001). It appears that, beyond height and body mass, total ridge count, pattern intensity for fingers and 2D:4D had more canonical loading. The physical fitness component of the first canonical variable incorporated, with high intensity were: the sum of skinfold thickness, the bench press onerepetition maximum (1RM), upper and lower body aerobic power. In the second canonical variable, physical fitness was composed of the squat 1RM, suspension time on the bar, the SJFT-index, and mean power during the upper body Wingate test. The data of this investigation showed the interdependence between biological markers of performance and physical fitness in high level judo athletes.

Digital system design process automation using place/transition petri nets

The constant increase in digital systems complexity definitely demands the automation of the corresponding synthesis process. This paper presents a computational environment designed to produce both software and hardware implementations of a system. The tool for code generation has been named ACG8051. As for the hardware synthesis there has been produced a larger environment consisting of four programs, namely: PIPE2TAB, AGPS, TABELA, and TAB2VHDL. ACG8051 and PIPE2TAB use place/transition net descriptions from PIPE as inputs. ACG8051 is aimed at generating assembly code for the 8051 micro-controller. PIPE2TAB produces a tabular version of a Mealy type finite state machine of the system, its output is fed into AGPS that is used for state allocation. The resulting digital system is then input to TABELA, which minimizes control functions and outputs of the digital system. Finally, the output generated by TABELA is fed to TAB2VHDL that produces a VHDL description of the system at the register transfer level. Thus, we present here a set of tools designed to take a high-level description of a digital system, represented by a place/transition net, and produces as output both an assembly code that can be immediately run on an 8051 micro-controller, and a VHDL description that can be used to directly implement the hardware parts either on an FPGA or as an ASIC.

Efeito da associação do herbicida clomazone a nanoesferas de alginato/quitosana na sorção em solos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

High levels of genetic differentiation and selfing in the Brazilian cerrado fruit tree Dipteryx alata Vog. (Fabaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Laboratory study on the bioremediation of diesel oil contaminated soil from a petrol station

O objetivo do presente estudo foi investigar possíveis métodos para aumentar a taxa de biodegradação aeróbia de hidrocarbonetos (tratamentos ex-situ). Neste trabalho, processos de biorremediação foram aplicados a um solo arenoso com alto nível de contaminação ocasionada por um vazamento de um tanque de armazenamento de óleo diesel subterrâneo em um posto de combustíveis. Experimentos em escala laboratorial (respirômetros de Bartha) foram utilizados para avaliar a biodegradação do óleo diesel. Estímulo da biodegradação foi realizado utilizando-se as técnicas de bioestímulo (adição de soluções de nitrogênio e fósforo ou surfactante Tween 80) e de bioaumento (consórcio bacteriano isolado de um sistema de landfarming). Para investigar as interações entre os fatores otimizadores, e encontrar a melhor combinação entre esses agentes, o estudo foi baseado em um delineamento experimental fatorial completo. A eficiência de biodegradação foi simultaneamente medida com dois métodos: respirométrico (produção de CO2 microbiano) e cromatografia gasosa. Testes de toxicidade aguda com Daphnia similis foram aplicados para examinar a eficiência dos processos em termos de geração de produtos menos tóxicos. Resultados mostraram que todas as estratégias de biorremediação aceleraram a biorremediação natural do solo contaminado e os melhores resultados foram obtidos quando os tratamentos tinham adição de nutrientes. Dados respirométricos indicaram uma máxima mineralização de hidrocarbonetos de 19,8%, obtida com a combinação dos três agentes, com uma remoção de hidrocarbonetos totais de petróleo (TPH) de 45,5% em 55 dias de tratamento. No final dos experimentos, duas espécies predominantes de bactéria foram isoladas e identificadas como Staphylococcus hominis e Kocuria palustris.

Optimization of temperature, sugar concentration, and inoculum size to maximize ethanol production without significant decrease in yeast cell viability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)