Codificação de fonte

Pós-graduação em Matemática Universitária - IGCE

DNA bar-coding reveals source and patterns of Thaumastocoris peregrinus invasions in South Africa and South America

Thaumastocoris peregrinus is a recently introduced invertebrate pest of non-native Eucalyptus plantations in the Southern Hemisphere. It was first reported from South Africa in 2003 and in Argentina in 2005. Since then, populations have grown explosively and it has attained an almost ubiquitous distribution over several regions in South Africa on 26 Eucalyptus species. Here we address three key questions regarding this invasion, namely whether only one species has been introduced, whether there were single or multiple introductions into South Africa and South America and what the source of the introduction might have been. To answer these questions, bar-coding using mitochondrial DNA (COI) sequence diversity was used to characterise the populations of this insect from Australia, Argentina, Brazil, South Africa and Uruguay. Analyses revealed three cryptic species in Australia, of which only T. peregrinus is represented in South Africa and South America. Thaumastocoris peregrinus populations contained eight haplotypes, with a pairwise nucleotide distance of 0.2-0.9% from seventeen locations in Australia. Three of these haplotypes are shared with populations in South America and South Africa, but the latter regions do not share haplotypes. These data, together with the current distribution of the haplotypes and the known direction of original spread in these regions, suggest that at least three distinct introductions of the insect occurred in South Africa and South America before 2005. The two most common haplotypes in Sydney, one of which was also found in Brisbane, are shared with the non-native regions. Sydney populations of T. peregrinus, which have regularly reached outbreak levels in recent years, might thus have served as source of these three distinct introductions into other regions of the Southern Hemisphere.

Reactive power support pricing of distributed generators with primary energy source uncertainty

In this paper, a novel methodology to price the reactive power support ancillary service of Distributed Generators (DGs) with primary energy source uncertainty is shown. The proposed methodology provides the service pricing based on the Loss of Opportunity Costs (LOC) calculation. An algorithm is proposed to reduce the uncertainty present in these generators using Multiobjective Power Flows (MOPFs) implemented in multiple probabilistic scenarios through Monte Carlo Simulations (MCS), and modeling the time series associated with the generation of active power from DGs through Markov Chains (MC). © 2011 IEEE.

Time-series-based maximization of distributed wind power generation integration

Energy policies and technological progress in the development of wind turbines have made wind power the fastest growing renewable power source worldwide. The inherent variability of this resource requires special attention when analyzing the impacts of high penetration on the distribution network. A time-series steady-state analysis is proposed that assesses technical issues such as energy export, losses, and short-circuit levels. A multiobjective programming approach based on the nondominated sorting genetic algorithm (NSGA) is applied in order to find configurations that maximize the integration of distributed wind power generation (DWPG) while satisfying voltage and thermal limits. The approach has been applied to a medium voltage distribution network considering hourly demand and wind profiles for part of the U.K. The Pareto optimal solutions obtained highlight the drawbacks of using a single demand and generation scenario, and indicate the importance of appropriate substation voltage settings for maximizing the connection of MPG.

Sequence characterization of coding regions of the myostatin gene (GDF8) from Brazilian Murrah buffaloes (Bubalus bubalis) and comparison with the Bos taurus sequence

Within about 30 years the Brazilian buffalo (Bubalus bubalis) herd will reach approximately 50 million head as a result of the great adaptive capacity of these animals to tropical climates, together with the good productive and reproductive potential which make these animals an important animal protein source for poor and developing countries. The myostatin gene (GDF8) is important in the physiology of stock animals because its product produces a direct effect on muscle development and consequently also on meat production. The myostatin sequence is known in several mammalian species and shows a high degree of amino acid sequence conservation, although the presence of non-silent and silent changes in the coding sequences and several alterations in the introns and untranslated regions have been identified. The objective of our work was to characterize the myostatin coding regions of B. bubalis (Murrah breed) and to compare them with the Bos taurus regions looking for variations in nucleotide and protein sequences. In this way, we were able to identify 12 variations at DNA level and five alterations on the presumed myostatin protein sequence as compared to non double-muscled bovine sequences.

Cryptic sexual populations account for genetic diversity and ecological success in a widely distributed, asexual fungus-growing ant

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tracing source and evolution of suspended particles in the Rio Negro Basin (Brazil) using chemical species of iron

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of tea from Turnera ulmifolia L. on mouse gastric mucosa support the Turneraceae as a new source of antiulcerogenic drugs

Turnera ulmifolia is a plant belonging to the family Turneraceae, popularly known in Brazil as chanana. This species is distributed from Guyana to southern Brazil where it is considered a weed. The plant occurs in tropical rain forest, fields, and gardens. Chanana tea is used in Brazilian folk medicine for the treatment of diseases related mainly to gastric dysfunction including gastric and duodenal ulcers. In this study, the ability of a lyophilized infusion, as an aqueous fraction (AqF) of the aerial parts of T. ulmifolia, was investigated for its ability to prevent ulceration of the gastric and duodenal mucosa was examined in mice and rats, respectively. The AqF significantly reduced the formation of lesions associated with HCl/ethanol administration by 39% and 46%, respectively, at doses of 500 mg/kg and 1000 mg/kg, p.o. The AqF also significantly reduced the incidence of gastric lesions induced by a combination of indomethacin and bethanechol by 58% and 72% at doses of 500 mg/kg and 1000 mg/kg, respectively. In stress-induced gastric ulcer, the inhibition by the AqF was 48%, 57%, and 58% at doses of 250 mg/kg, 500 mg/kg, and 1000 mg/kg, respectively (p<0.05). A pyloric ligature experiment showed that the highest dose of the AqF significantly affected the gastric juice parameters by increasing the pH from 2.5 (control) to 5.3 and decreasing the acid output from 11.3 (control) to 3.7 mEq/ml/4 h. The AqF had no significant effect on duodenal ulcers induced by cysteamine. Preliminary phytochemical screening confirmed that flavonoids were the major constituents of the AqF of T. ulmifolia. These results indicate that this extract has a significant antiulcerogenic effect, as popularly believed.

Influence of light curing source on microhardness of composite resins of different shades

Introduction: The evolution of light curing units can be noticed by the different systems recently introduced. The technology of LED units promises longer lifetime, without heating and with production of specific light for activation of camphorquinone. However, further studies are still required to check the real curing effectiveness of these units. Purpose: This study evaluated the microhardness of 4 shades (B-0.5, B-1, B-2 and B-3) of composite resin Filtek Z-250 (3M ESPE) after light curing with 4 light sources, being one halogen (Ultralux - Dabi Atlante) and three LED (Ultraled - Dabi Atlante, Ultrablue - DMC and Elipar Freelight - 3M ESPE). Methods: 192 specimens were distributed into 16 groups, and materials were inserted in a single increment in cylindrical templates measuring 4mm x 4mm and light cured as recommended by the manufacturer. Then, they were submitted to microhardness test on the top and bottom aspects of the cylinders. Results: The hardness values achieved were submitted to analysis of variance and to Tukey test at 5% confidence level. It was observed that microhardness of specimens varied according to the shade of the material and light sources employed. The LED appliance emitting greater light intensity provided the highest hardness values with shade B-0.5, allowing the best curing. On the other hand, appliances with low light intensity were the least effective. It was also observed that the bottom of specimens was more sensitive to changes in shade. Conclusion: Light intensity of LED light curing units is fundamental for their good functioning, especially when applied in resins with darker shades.

Enterprise systems modeling: The ERP5 development process

The design and implementation of an ERP system involves capturing the information necessary for implementing the system's structure and behavior that support enterprise management. This process should start on the enterprise modeling level and finish at the coding level, going down through different abstraction layers. For the case of Free/Open Source ERP, the lack of proper modeling methods and tools jeopardizes the advantages of source code availability. Moreover, the distributed, decentralized decision-making, and source-code driven development culture of open source communities, generally doesn't rely on methods for modeling the higher abstraction levels necessary for an ERP solution. The aim of this paper is to present a model driven development process for the open source ERP ERP5. The proposed process covers the different abstraction levels involved, taking into account well established standards and common practices, as well as new approaches, by supplying Enterprise, Requirements, Analysis, Design, and Implementation workflows. Copyright 2008 ACM.

Contribution of distributed generators to the harmonic distortion in low voltage power network

In the last 20 years immense efforts have been made to utilize renewable energy sources for electric power generation. This paper investigates some aspects of integration of the distributed generators into the low voltage distribution network. An assessment of impact of the distributed generators on the voltage and current harmonic distortion in the low voltage network is performed. Results obtained from a case study, using real-life low voltage network, are presented and discussed.

Source and frequency of dry season lipid supplementation of grazing, finishing cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

HLA-E coding and 3' untranslated region variability determined by next-generation sequencing in two West-African population samples

HLA-E is a non-classical Human Leucocyte Antigen class I gene with immunomodulatory properties. Whereas HLA-E expression usually occurs at low levels, it is widely distributed amongst human tissues, has the ability to bind self and non-self antigens and to interact with NK cells and T lymphocytes, being important for immunosurveillance and also for fighting against infections. HLA-E is usually the most conserved locus among all class I genes. However, most of the previous studies evaluating HLA-E variability sequenced only a few exons or genotyped known polymorphisms. Here we report a strategy to evaluate HLA-E variability by next-generation sequencing (NGS) that might be used to other HLA loci and present the HLA-E haplotype diversity considering the segment encoding the entire HLA-E mRNA (including 5'UTR, introns and the 3'UTR) in two African population samples, Susu from Guinea-Conakry and Lobi from Burkina Faso. Our results indicate that (a) the HLA-E gene is indeed conserved, encoding mainly two different protein molecules; (b) Africans do present several unknown HLA-E alleles presenting synonymous mutations; (c) the HLA-E 3'UTR is quite polymorphic and (d) haplotypes in the HLA-E 3'UTR are in close association with HLA-E coding alleles. NGS has proved to be an important tool on data generation for future studies evaluating variability in non-classical MHC genes.