Object oriented modeling of piston engines

This work reports a conception phase of a piston engine global model. The model objective is forecast the motor performance (power, torque and specific consumption as a function of rotation and environmental conditions). Global model or Zero-dimensional is based on flux balance through each engine component. The resulting differential equations represents a compressive unsteady flow, in which, all dimensional variables are areas or volumes. A review is presented first. The ordinary differential equation system is presented and a Runge-Kutta method is proposed to solve it numerically. The model includes the momentum conservation equation to link the gas dynamics with the engine moving parts rigid body mechanics. As an oriented to objects model the documentation follows the UML standard. A discussion about the class diagrams is presented, relating the classes with physical model related. The OOP approach allows evolution from simple models to most complex ones without total code rewrite. Copyright © 2001 Society of Automotive Engineers, Inc.

Avaliação da utilização do atual Diesel (combustível) comercial brasileiro (ano de referência 2003-2004) para motores com gerenciamento eletrônico de combustível e sistema de recirculação de gases de escape (EGR), certificados pela legislação EPA, 2004

Pós-graduação em Engenharia Mecânica - FEG

Síntese de filmes finos a-C:H pela técnica de implantação e deposição por imersão em plasma

Pós-graduação em Ciência e Tecnologia de Materiais - FC

STUDY of THE TURNING NICKEL BASE ALLOY PYROMET (R) 31V (SAE HEV8)

Considering the constant technological developments in the aeronautical, space, automotive, shipbuilding, nuclear and petrochemical fields, among others, the use of materials with high strength mechanical capabilities at high temperatures has been increasingly used. Among the materials that meet the mechanical strength and corrosion properties at temperatures around 815 degrees C one can find the nickel base alloy Pyromet 31V (SAE HEV8). This alloy is commonly applied in the manufacturing of high power diesel engines exhaust valves where it is required high resistance to sulphide, corrosion and good resistance to creep. However, due to its high mechanical strength and low thermal conductivity its machinability is made difficult, creating major challenges in the analysis of the best combinations among machining parameters and cutting tools to be used. Its low thermal conductivity results in a concentration of heat at high temperatures in the interfaces of workpiece-tool and tool-chip, consequently accelerating the tools wearing and increasing production costs. This work aimed to study the machinability, using the carbide coated and uncoated tools, of the hot-rolled Pyromet 31V alloy with hardness between 41.5 and 42.5 HRC. The nickel base alloy used consists essentially of the following components: 56.5% Ni, 22.5% Cr, 2,2% Ti, 0,04% C, 1,2% Al, 0.85% Nb and the rest of iron. Through the turning of this alloy we able to analyze the working mechanisms of wear on tools and evaluate the roughness provided on the cutting parameters used. The tests were performed on a CNC lathe machine using the coated carbide tool TNMG 160408-23 Class 1005 (ISO S15) and uncoated tools TNMG 160408-23 Class H13A (ISO S15). Cutting fluid was used so abundantly and cutting speeds were fixed in 75 and 90 m/min. to feed rates that ranged from 0.12, 0.15, 0.18 and 0.21 mm/rev, and cutting depth of 0.8mm. The results of the comparison between uncoated tools and coated ones presented a machined length of just 30% to the first in relation to the performance of the second. The coated tools has obtained its best result for both 75 and 90 m/min. with feed rate of 0.15 mm/rev, unlike the uncoated tool which obtained its better results to 0.12 mm/rev.

Manejo de irrigação por aspersão com base no Kc e adubação mineral na cultura de arroz de terras altas

A irrigação por aspersão diminui bastante o risco de perda da lavoura por deficiência hídrica e aumenta a produtividade de grãos, incentivando maior uso de tecnologias como adubação mineral. Com o objetivo de avaliar o efeito de diferentes manejos da água da irrigação por aspersão com base no coeficiente de cultura (Kc) e da adubação mineral sobre a cultura do arroz cv. IAC 201, foram instalados dois experimentos em Latossolo Vermelho Distrófico, em Selvíria (MS). O delineamento foi em blocos casualizados, com quatro repetições. Os tratamentos constituíram-se de precipitação pluvial natural e três manejos de água fornecidos por aspersão. O manejo (M2) foi realizado com base no Kc do arroz de terras altas. Os manejos M1 e M3 foram definidos como 0,5 e 1,5 vezes os Kcs utilizados em M2 respectivamente. em 1995/96, utilizou-se o esquema de parcelas subdivididas, sendo as subparcelas constituídas por dois níveis de adubação: AD1 - 12 kg de N, 90 kg de P2O5 e 30 kg de K2O ha-1, e AD2 - 24 kg de N, 180 kg de P2O5 e 60 kg de K2O ha-1. A deficiência hídrica da emergência da plântula até a diferenciação do primórdio da panícula provocou aumento do ciclo e redução do porte da planta. A deficiência hídrica entre os estádios de diferenciação do primórdio da panícula e os de emborrachamento reduziu o número de espiguetas por panícula. A utilização de 1,5 vezes os valores de Kc recomendados, no manejo da irrigação por aspersão proporcionou maior produtividade de grãos. Os níveis de adubação utilizados não influenciaram a resposta da cultura ao manejo da irrigação por aspersão.

Qualidade da dieta de adolescentes: estudo de base populacional em Campinas, SP

O objetivo deste estudo foi avaliar a qualidade global da dieta e a adequação do consumo de cada componente da dieta de adolescentes segundo fatores demográficos, socioeconômicos e índice de massa corporal (IMC). Trata-se de estudo transversal, de base populacional, que analisou amostra representativa de 409 adolescentes, de 12 a 19 anos, utilizando o Índice de Qualidade da Dieta (IQD). Foram estimadas as prevalências de dietas classificadas no 1º quartil do IQD e as médias de escores de cada componente do IQD. Regressões múltiplas linear e de Poisson foram utilizadas nas análises. O escore médio do IQD foi de 59,7. Observou-se menor prevalência de dietas inadequadas no segmento de melhor escolaridade do chefe da família. Os estratos de menor nível socioeconômico, avaliados por renda e escolaridade, mostram um consumo inferior de verduras e legumes, frutas, leite e derivados e menor variedade da dieta e uma ingestão superior de cereais e derivados e leguminosas. Adolescentes com sobrepeso/obesidade consomem mais carnes e ovos e menos frutas comparados aos que apresentam baixo peso/eutrofia. As meninas tiveram maior ingestão de gordura total e menor ingestão de sódio. Os resultados identificam os componentes que merecem atenção nas estratégias de promoção de alimentação saudável e os segmentos mais vulneráveis à má alimentação.

Desenvolvimento de um dispositivo para obtenção de monocristais de ligas à base de cobre

This paper describes the drawing, construction and optimization of a device, which can be used to obtain single crystals of different metallic materials with melting point from 550 to 1050°C. Components of ease obtaining and of low cost were used. The device was based on the modified Bridgman technique and it was used to obtain single crystals of copper-based alloys. The temperature axial profiles and a difference less then 1% in the temperature between the wall and the center of the ceramic tube in the critical region for obtaining single crystals of good quality indicated that the oven presents a good thermal stability. Single crystals of CuZnAl and CuAlAg alloys of good quality were growth and characterized using optical microscopy and Laüe X-ray back reflection.

Cytotoxicity of denture base resins: Effect of water bath and microwave postpolymerization heat treatments

Purpose: This study compared the effect of two postpolymerization heat treatments on the cytotoxicity of three denture base resins on L929 cells using 3H-thymidine incorporation and MTT assays. Materials and Methods: Sample disks of Lucitone 550, QC 20, and Acron MC resins were fabricated under aseptic conditions and stored in distilled water at 37°C for 48 hours. Specimens were then divided into three groups: (1) heat treated in microwave oven for 3 minutes at 500 W; (2) heat treated in water bath at 55°C for 60 minutes; and (3) no heat treatment. Eluates were prepared by placing three disks into a sterile glass vial with 9 mL of Eagle's medium and incubating at 37°C for 24 hours. The cytotoxic effect from the eluates was evaluated using the 3H-thymidine incorporation and MTT assays, which reflect DNA synthesis levels and cell metabolism, respectively. Results: The components leached from the resins were cytotoxic to L929 cells when 3H- thymidine incorporation assay was employed. In contrast, eluates from all resins revealed noncytotoxic effects as measured by MTT assay. For both MTT assay and 3H-thymidine incorporation, the heat treatments did not decrease the cytotoxicity of the materials tested. Conclusion: Resins were graded by 3H-thymidine incorporation assay as slightly cytotoxic and by MTT assay as noncytotoxic. Cytotoxicity of the denture base materials was not influenced by microwave or water bath heat treatment.

Effect of post-polymerization heat treatments on the cytotoxicity of two denture base acrylic resins

Introduction: Most denture base acrylic resins have polymethylmethacrylate in their composition. Several authors have discussed the polymerization process involved in converting monomer into polymer because adequate polymerization is a crucial factor in optimizing the physical properties and biocompatibility of denture base acrylic resins. To ensure the safety of these materials, in vitro cytotoxicity assays have been developed as preliminary screening tests to evaluate material biocompatibility. 3H-thymidine incorporation test, which measures the number of cells synthesizing DNA, is one of the biological assays suggested for cytotoxicity testing. Aim: The purpose of this study was to investigate, using 3H-thymidine incorporation test, the effect of microwave and water-bath post-polymerization heat treatments on the cytotoxicity of two denture base acrylic resins. Materials and Methods: Nine disc-shaped specimens (10 x 1 mm) of each denture base resin (Lucitone 550 and QC 20) were prepared according to the manufacturers' recommendations and stored in distilled water at 37°C for 48 h. The specimens were assigned to 3 groups: 1) post-polymerization in a microwave oven for 3 min at 500 W; 2) post-polymerization in water-bath at 55°C for 60 min; and 3) without post-polymerization. For preparation of eluates, 3 discs were placed into a sterile glass vial with 9 mL of Eagle's medium and incubated at 37°C for 24 h. The cytotoxic effect of the eluates was evaluated by 3H-thymidine incorporation. Results: The results showed that the components leached from the resins were cytotoxic to L929 cells, except for the specimens heat treated in water bath (p<0.05). Compared to the group with no heat treatment, water-bath decreased the cytotoxicity of the denture base acrylic resins. Conclusion: The in vitro cytotoxicity of the tested denture base materials was not influenced by microwave post-polymerization heat treatment.

Study of utilization of petrol engine equipped with exhaust gas recirculation (EGR) and catalytic converter to reduce consumption and NOx emission

Study of consumption rate and gaseous pollutant emission from engine tests simulating real work conditions, using spark point manually controlled and exhaust gas recirculation (EGR) in diverse proportion levels. The objective of this work is to re-examine the potential of the EGR conception, a well-known method of combustion control, employed together electronic fuel injection and three-way catalytic converter closed-loop control at a spark ignition engine, verifying the performance characteristics and technical availability of this conception to improve pollution control, fuel economy at low torque drive condition and to improve the engine exhaust components useful life. The pollutant emissions and consumption levels under operational conditions simulations were analysed and compared with the expected by concerning theory and real tests performed by EGR equipped engines by factory. Copyright © 2006 Society of Automotive Engineers, Inc.

Seleção de genótipos resistentes de amendoinzeiro a Anticarsia gemmatalis Hübner (Lepidoptera: Noctuidae) com base em análises multivariadas

The velvetbean caterpillar Anticarsia gemmatalis Hübner attacks peanut leaves, and the use of resistant varieties has directly contributed to ecological and economic aspects of pest control. The aim of this work was to select resistant peanut genotypes to A. gemmatalis using cluster analyses (dendogram obtained by Ward's methods and K-means) and Principal Components analysis for data interpretation. The evaluated genotypes were: IAC 5, IAC 8112, IAC 22 and IAC Tatu ST with upright growth habit, and IAC 147, IAC 125, IAC Caiapó and IAC Runner 886 with runner growth habit, and soybean genotype BR 16 as a susceptible control. The biological parameters: leaf consumption, larval (4o instar) and pupal (24h old) weight, larval and pupal development time and adult longevity were evaluated at laboratory conditions. The genotypes IAC 147 and IAC Runner 886 were resistant to A. gemmatalis in both cluster tests, grouping apart from most of the other genotypes. Both dendrogram and K-means methods provided satisfactory biological explanation, and they can be complementary used together with Principal Component and vice-versa. These results suggest that cluster analyses may be an important statistical tool in the selection of host plant resistance.

Estimativas das radiações direta e difusa em superfícies inclinadas com base na razáo de insolação

Statistical equations were obtained and evaluated with annual, seasonal and monthly data groupings for estimates of direct and diffuse components of solar radiation based on the sunshine duration (ratio of sunshine and photoperiod) incident on horizontal and inclined surfaces to 12.85, 22.85 and 32.85° with facing to North, in Botucatu, SP. The ratios between the two components and radiation at the top of the atmosphere were used, in a database whose inclinations were measured in three different periods (22.85°: 04/1998 to 07/2001; 12.85°: 08/2011 to 02/2003; and 32.85°: 03/2003 to 12/2007) and concomitant with horizontal measures and sunshine duration. The correlations showed a linear and second degree polynomial behavior for the direct and diffuse radiation, with higher coefficients of determination in periods of low variation in the coverage of the sky (cloudiness). The highest values of the direct and diffuse radiation were found in winter and summer, respectively for all surfaces evaluated. The increase in the inclination angle decreased the performance of equations in all groups of data with increase in scattering and decrease in index of the adjustment, however, the monthly equations allowed better performance for the two components.

O emprego da metodologia de superfície de resposta no desenvolvimento de um novo produto simbiótico, fermentado com Enterococcus faecium CRL 183 e Lactobacillus helveticus ssp jugurti 416, à base de extratos aquosos de soja e de Yacon (Smallanthus sonchifolius)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de pré-tratamentos com emulsões a base de lecitina e óleo de soja na cinética de secagem da uva rubi

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Substituição de estabilizantes a base de chumbo pelo de cálcio-zinco no processo produtivo de tubos de PVC rígido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)