Permian stromatolites associated with bivalve coquina beds-Angatuba, SP, Brazil (Teresina Formation, Parana Basin)

Silicified stromatolites have been described in the Permian Teresina Formation, Passa Dois Group, of the Parana Basin. These stromatolites occur as blocks in the Fazenda Monte Alegre area at the headwaters of the creek known as Corrego Catanduva in the municipality of Angatuba. These blocks originate from the Serra de Angatuba region and were recognized in a road that was cut in the midst of sandstones and siltites. The stromatolites are isolated bioherms that are domed to subspherical with a flat base in profile and a rounded to lenticular shape in plan view. The stromatolites exhibit a reddish coloration and are composed of microcrystalline quartz. Lamination is continuous, non-columnar, and anastomosed, showing parallel to divergent growth; however, divergent columns also occur, especially at the tops of the bioherms. The lamination is fine and well preserved, with alternating light and dark laminas. Microfossils of filamentous cyanobacteria are preserved and were related to the genera Microcoleus and Rivularia. Silicified bivalves occur in association with the stromatolites and are preserved in the form of coquina beds and rare isolated specimens within the bioherms. The described specimens belong to the Pinzonella illusa biozone, with representatives of the species Pinzonella illusa, Angatubia cowperesioides, and Houldausiella elongata. The formation environment of these stromatolites is associated with tidal plains of shallow, brackish, relatively calm, warm waters of good luminosity with the presence of weak currents. There was likely a low level of predation, and the environment may have been hypersaline. The coquina beds associated with the stromatolites indicate a probable proximal tempestite, i.e., they were formed near the coastline. The stromatolites were originally composed of carbonates, although these were replaced by silica during early diagenesis.

Vacuumless kink systems from vacuum systems: An example

Some years ago, Cho and Vilenkin, introduced a model which presents topological solutions, despite not having degenerate vacua as is usually expected. Here we present a new model with topological defects, connecting degenerate vacua but which in a certain limit recovers precisely the one proposed originally by Cho and Vilenkin. In other words, we found a kind of parent model for the so called vacuumless model. Then the idea is extended to a model recently introduced by Bazeia et al. Finally, we trace some comments the case of the Liouville model.

Vacuum effects on massive spinor fields: S-1 x R-3 topology

The aim of this work was to investigate the role played by an external field on the Casimir energy density for massive fermions under S-1 x R-3 topology. Both twisted- and untwisted-spin connections are considered and the calculation in a closed form is performed using an alternative approach based on the combination of the analytic regularization method and the Euler-Maclaurin summation formula. It is shown that no mass scale appears in the final result and, therefore, Casimir effect arises only from the boundary conditions and vacuum fluctuations induced by the coupling with the external field.

Fermions bounded by kinks of false vacuum models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Reproductive output of the spider crab Epialtus bituberculatus (H. Milne Edwards, 1834) (Crustacea, Decapoda, Brachyura) associated with beds of the alga Sargassum cymosum (C. Agardh, 1820) on the southeastern Brazilian coast

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Shell beds as paleoecological puzzles: A case study from the Upper Permian of the Parana Basin, Brazil

Microstratigraphic, sedimentological, and taphonomic features of the Ferraz Shell Bed, from the Upper Permian (Kazanian-Tatarian?) Corumbatai Formation of Rio Claro Region (the Parana Basin, Brazil), indicate that the bed consists of four distinct microstratigraphic units. They include, from bottom to top, a lag concentration (Unit 1), a partly reworked storm deposit (Unit 2), a rapidly deposited sandstone unit with three thin horizons recording episodes of reworking (Unit 3), and a shell-rich horizon generated by reworking/winnowing that was subsequently buried by storm-induced obrution deposit (Unit 4). The bioclasts of the Ferraz Shell Bed represent exclusively bivalve mollusks. Pinzonella illusa and Terraia aequilateralis are the dominant species. Taphonomic analysis indicates that mollusks are heavily time-averaged (except for some parts of Unit 3). Moreover, different species are time-averaged to a different degree (disharmonious time-averaging). The units differ statistically from one another in their taxonomic and ecological composition, in their taphonomic pattern, and in the size-frequency distributions of the two most common species. Other Permian shell beds of the Parana Basin are similar to the Ferraz Shell Bed in their faunal composition (they typically contain similar sets of 5 to 10 bivalve species) and in their taphonomic, sedimentologic, and microstratigraphic characteristics. However, rare shell beds that include 2-3 species only and are dominated by articulated shells preserved in life position also occur. Diversity levels in the Permian benthic associations of the Parana Basin were very low, with the point diversity of 2-3 species and with the within-habitat and basin-wide (alpha and gamma) diversities of 10 species, at most. The Parana Basin benthic communities may have thus been analogous to low-diversity bivalve-dominated associations of the present-day Baltic Sea. The 'Ferraz-type' shell beds of the Parana Basin represent genetically complex and highly heterogeneous sources of paleontological data. They are cumulative records of spectra of benthic ecosystems time-averaged over long periods of time (10(2)-10(4) years judging from actualistic research). Detailed biostratinomic reconstructions of shell beds can not only offer useful insights into their depositional histories, but may also allow paleoecologists to optimize their sampling designs, and consequently, refine paleoecological and paleoenvironmental interpretations.

Calculation of the vacuum pressure gradient in field emission displays

The usual design of field-emission displays (FEDs) often results in high vacuum pressure gradients inside the glass plates of the device, and this is the main limitation to the widespread availability of large area FEDs. In this paper, we perform theoretical calculations using the finite element method for determining the pressure distributions in several pumping configurations, including a new FED configuration known as porous FED or pFED. The approach here is capable of clarifying the design issues influencing the final pressure relevant to the field-emission display devices. (C) 2001 Elsevier B.V. B.V. All rights reserved.

INFLUENCE of ENCAPSULATING MATERIALS on WATER SORPTION ISOTHERMS of VACUUM-DRIED PERSIMMON PULP POWDER

Water sorption isotherms for vacuum-dried persimmon pulp (PP) powder were determined in the temperature range of 20-50C, and the effects of maltodextrin (MD) or gum arabic (GA) addition on the water sorption behavior of the dried powders were analyzed. Several models were evaluated to fit the experimental data and the Guggenheim-Anderson-de Boer model was selected as the most adequate to describe the observed behavior. Addition of encapsulants affected the isotherms: at the same water activity, PP powder with added GA (PP + GA) or MD (PP + MD) presented lower equilibrium water content than pure PP and were less affected by temperature variations. Samples of PP + MD presented lower equilibrium moisture content than those of PP + GA. The isosteric heats of sorption of pulp powders with encapsulants were higher (less negative) than those of PP, suggesting that there are more active polar sites in PP than in pulp powder containing encapsulants.PRACTICAL APPLICATIONSThe choice of persimmon to carry out this work was due to the large persimmon production available in Brazil; moreover, persimmon pulp is rich in vitamin C, vitamin A and iron, as well as in phenolic compounds. Drying of fruit pulps with high sugar content presents technical difficulties because the hygroscopicity and thermoplasticity of the resulting powders when exposed to high temperature and relative humidity. For this reason, addition of high-molar-mass biopolymers, such as maltodextrin or gum arabic, is a strategy to aid drying and to improve storage stability. Knowledge of water sorption isotherms and net isosteric heats of sorption is important to various food processing operations, including drying, storage and packaging. They are useful in calculating time and energy consumptions during drying, modeling moisture changes during storage and predicting shelf life of food products.

Effects of vacuum structure on neutron star

We study the equation of state for neutron matter using the Walecka model including quantum corrections for baryons and sigma mesons through a realignment of the vacuum. We next use this equation of state to calculate the radius, mass and other properties of rotating neutron star.

Do static sources respond to massive scalar particles from the Hawking radiation as uniformly accelerated ones do in the inertial vacuum?

We examine the recently found equivalence for the response of a static scalar source interacting with a massless Klein-Gordon field when the source is (i) static in Schwarzschild spacetime, in the Unruh vacuum associated with the Hawking radiation, and (ii) uniformly accelerated in Minkowski spacetime, in the inertial vacuum, provided that the source's proper acceleration is the same in both cases. It is shown that this equivalence is broken when the massless Klein-Gordon field is replaced by a massive one.

QCD vacuum topology and glueballs

We outline a comprehensive study of spin-0 glueball properties which, in particular, keeps track of the topological gluon structure. Specifically, we implement (semi-hard) topological instanton physics as well as topological charge screening in the QCD vacuum into the operator product expansion (OPE) of the glueball correlators. A realistic instanton size distribution and the (gauge-invariant) renormalization of the instanton contributions are also implemented. Predictions for 0(++) and 0(-+) glueball properties are presented.

Vacuum polarization effects in hyperon-rich dense matter - a nonperturbative treatment

We derive the equation of state (EOS) for electrically charged neutral dense matter using the quantum hadrodynamics (QHD) model. This is carried out in a non-perturbative manner including quantum corrections for baryons through a realignment of vacuum with baryon-antibaryon condensates. This yields the results of relativistic Hartree approximation of summing over baryonic tadpole diagrams. The quantum corrections from the scalar meson is also taken into account in a similar way. This leads to a softening of the EOS for the hyperonic matter. The formalism also allows Lis to make a self-consistent calculation of the in-medium sigma meson mass. The effects of such quantum corrections on the composition of charged neutral dense matter is considered. The effect of the resulting EOS on the structure of neutron stars is also studied.

Coulomb gauge quark model, vacuum condensates and high density quark matter

We consider here a Coulomb gauge quark model which includes an explicit construct for a nontrivial vacuum structure in QCD at finite density. Non-perturbative renormalization of ultraviolet diverges is performed by adding counterterms. The equation of state for u and d quark matter at zero temperature is calculated in the Hartree-Fock approximation.

Vacuum energy as a c-function for theories with dynamically generated masses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Generating Erler-Schnabl-type solution for the tachyon vacuum in cubic superstring field theory

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)