Adubação foliar com silício na cultura do milho

Inúmeros trabalhos têm demonstrado o efeito benéfico da adubação com silício sobre o acréscimo da produção de diversas culturas, como, por exemplo, arroz, cana-de-açúcar e batata. No entanto, são escassas as informações sobre os benefícios nutricionais do silício para a cultura do milho. Desta maneira, objetivou-se, neste estudo, avaliar o efeito de doses e épocas de aplicação de silício, via foliar, nas características agronômicas e na produtividade do milho, cultivado no ano agrícola 2007/2008. O delineamento experimental adotado foi o de blocos casualizados, em esquema fatorial (4 x 3) + 1, com quatro repetições, envolvendo doses de silício (130, 260, 390 e 520 g ha-1 de Si) aplicadas via foliar, épocas de aplicação (2, 5 e 8 folhas expandidas) e uma testemunha (sem aplicação de Si). As variáveis analisadas foram altura das plantas e a inserção da primeira espiga, diâmetro de colmo, índice de clorofila foliar, teor foliar de silício, número de grãos por espiga, massa de 100 grãos e produtividade de grãos. O silício aplicado via foliar influenciou somente o teor foliar de Si.

Development of mint (Mentha piperita L.) grown on biosolids: evaluation of productivity and essential oil content

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of application time of APF and NaF gels on microhardness and fluoride uptake of in vitro enamel caries

Purpose : To evaluate the effect of time of fluoride application gel, acidulated or neutral, on in vitro enamel resistance to demineralization and fluoride uptake. Materials and Methods: One hundred and ninety-two human enamel blocks were used in this study and 144 were treated with fluoride gel, acidulated or neutral, for I or 4 minutes. Ninety-six blocks treated with fluoride and 24 control blocks were submitted to a high cariogenic challenge. After the pH-cycling, enamel demineralization was assessed by surface and cross-sectional microhardness. Fluoride in the enamel blocks was also determined after removing an enamel layer by etching acid. Results: Acidulated fluoride gel formed more fluoride in enamel than neutral gel (P < 0.05), and it was also more efficient in reducing the demineralization of the enamel blocks submitted to a cariogenic challenge than the neutral one (P < 0.05). It was found that the time of application was significant in terms of fluoride uptake, but it did not render the enamel more resistant to dernineralization.

Intercropping time of corn and palisadegrass or guineagrass affecting grain yield and forage production

Intercropping corn (Zea mays L.) with forages, such as palisadegrass {Urochloa brizantha (Hochst. ex A. rich.) r. D. Webster [syn. Brachiaria brizantha (Hochst. ex A. rich.) Stapf]} or guineagrass [Megathyrsus maximus (Jacq.) B. K. Simon & S. W. L. Jacobs (syn. Panicum maximum Jacq.)], provides large amounts of biomass for use as straw in no-tillage systems or as pasture. However, it is important to evaluate what time these forages have to be sown into corn systems to avoid reductions in both corn and forage production. This study, conducted for three growing seasons at Botucatu, Brazil, evaluated nutrient concentration and yield of corn as affected by time of forage intercropped as well as forage's dry matter production. our data showed that intercropping systems did not reduce leaf nutrient concentrations and grain yield of corn in relation to sole corn. The simultaneous intercropping of corn and guineagrass resulted in the lowest plant population (51, 200 plant ha-1), number of ears per plant (1.0), and, consequently, the lowest corn grain yield (9801 kg ha-1). Guineagrass seeded at the time of corn fertilizer topdressing resulted in the highest plant population (59, 400 plants ha-1), number of ears per plant (1.2), and corn grain yield (12, 077 kg ha-1). Forage production was highest when intercrop was done simultaneously. palisadegrass could be intercropped with corn both simultaneously or at topdressing fertilization stage. In contrast, it is recommended that guineagrass should only be intercropped with corn at topdressingfertilization. © Crop Science Society of America.

Nutritive value of high and low tanin content of sorghum high moisture silage for horses

Foram utilizados oito cavalos castrados sem raça definida em delineamento inteiramente casualizado. O objetivo foi determinar o valor nutritivo das silagens de grãos de sorgo de baixo (SBT) e alto (SAT) teores de tanino na alimentação de equinos. Os tratamentos consistiram de duas dietas-teste compostas pelos grãos de sorgo ensilados (SBT e SAT), substituindo em 30% a MS da dieta-referência, constituída exclusivamente por feno. Os valores de digestibilidade dos nutrientes dos SBT e SAT apresentaram diferenças nos CDMS, CDMO, CDEB, CDPB e CDAmido em que SAT foi inferior (p < 0,05) para todos os parâmetros, em que os valores médios foram de, respectivamente, 79,53, 84,54, 79,36, 76,11 e 100% para SBT e 60,29, 64,47, 59,38, 44,63 e 97,06% para SAT. Concluiu-se que a utilização do SBT é promissora na nutrição de equinos, tornando-se alimento alternativo nas formulações de rações.

Influence of carrageenan and total solids content on the rheological properties of lactic beverage made with yogurt and whey

The purpose of this work was to study the influence of carrageenan level (X 1) and total solids content of yogurt/whey mixture (X 2) on starter culture fermentation time, physicochetnical properties (pH, fat and total solids contents) and rheological characteristics of lactic beverages using response surface methodology. The physicochemical characteristics of the lactic beverages were similar to those of commercial products. All beverages showed non-Newtonian fluid behavior with thixotropy and yield stress. The total solids content of the lactic beverages had a greater influence on the rheological behavior of these products than the carrageenan level. Wide ranges of consistency measurements were observed by varying the stabilizer level and total solids content.

The Predation of Artemia Nauplii by the Larvae of the Amazon River Prawn, Macrobrachium amazonicum (Heller, 1862), is Affected by Prey Density, Time of Day, and Ontogenetic Development

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

Compressive strength and setting time of MTA and portland cement associated with different radiopacifying agents

The aim of this study was to evaluate the compressive strength and setting time of MTA and Portland cement (PC) associated with bismuth oxide (BO), zirconium oxide (ZO), calcium tungstate (CT), and strontium carbonate (SC). Methods. For the compressive strength test, specimens were evaluated in an EMIC DL 2000 apparatus at 0.5 mm/min speed. For evaluation of setting time, each material was analyzed using Gilmore-type needles. The statistical analysis was performed with ANOVA and the Tukey tests, at 5% significance. Results. After 24 hours, the highest values were found for PC and PC + ZO. At 21 days, PC + BO showed the lowest compressive strength among all the groups. The initial setting time was greater for PC. The final setting time was greater for PC and PC + CT, and MTA had the lowest among the evaluated materials (< 0.05). Conclusion. The results showed that all radiopacifying agents tested may potentially be used in association with PC to replace BO.

Coffee leaf and stem anatomy under boron deficiency

A deficiência de B é muito comum nos cafezais brasileiros, mas as respostas do cafeeiro ao B têm sido erráticas, dependendo do ano, do modo e época de aplicação e, ainda, da fonte de B empregada. Um melhor entendimento dos efeitos do B na fisiologia e anatomia do cafeeiro é importante para o desenvolvimento de um programa racional de adubação boratada, uma vez que a anatomia da planta pode influenciar a translocação do nutriente. Neste experimento, plantas de dois cultivares foram cultivadas em soluções nutritivas com 0,0 (deficiente), 5,0 (adequado) e 25,0 µM (alto) de B. Quando os primeiros sintomas de deficiência apareceram, as folhas foram cortadas e tiveram suas paredes celulares isoladas e analisadas quanto aos teores de B e Ca. Cortes foram feitos em folhas novas e no ápice de ponteiros e fotografados em microscópio eletrônico de varredura. A resposta dos dois cultivares ao B foi semelhante, não tendo sido observados sintomas de toxidez. O teor de B nas paredes celulares foi aumentado com o incremento da concentração desse elemento na solução, enquanto o teor de Ca não foi afetado. A relação Ca/B decresceu com o aumento da concentração de B na solução. Com deficiência de B, os tecidos vasculares foram desorganizados e as paredes do xilema ficaram mais finas. Folhas de café com deficiência deste nutriente apresentaram menos estômatos, os quais se encontravam.

Doses, fontes e épocas de aplicação de nitrogênio em cultivares de arroz

As exigências das culturas pelo nitrogênio são diferenciadas, tanto no que se refere às quantidades, quanto à época de aplicação, sendo que este nutriente pode ser perdido por lixiviação, volatilização e erosão. Conduziu-se este trabalho, com o objetivo de avaliar a resposta das cultivares de arroz BRSMG Curinga e IAC 202 à aplicação de doses, fontes e épocas de aplicação de nitrogênio. Os tratamentos constituíram-se de cinco doses de nitrogênio (0, 50, 100, 150 e 200 kg de N ha-1), sob a forma de três fontes nitrogenadas (sulfonitrato de amônio com inibidor de nitrificação, sulfato de amônio e uréia), em duas épocas de aplicação (semeadura ou perfilhamento), cultivado com irrigação suplementar. O delineamento experimental utilizado foi o de blocos ao acaso em esquema fatorial 5x3x2x2, com quatro repetições. A cultivar de arroz BRSMG Curinga apresentou a maior produtividade. As doses de N aumentaram o teor de N foliar, a altura de plantas, o número de panículas m-2, o número e a massa de espiguetas granadas panícula-1 e a produtividade de grãos, mas não influenciou a massa de 100 grãos. As fontes nitrogenadas e as épocas de aplicação tiveram efeito semelhante para todas as avaliações. A maior produtividade foi alcançada com a dose de 122 kg de N ha-1, independente da fonte utilizada.

A Case Study: The Effect of Visitors on Two Captive Pumas With Respect to the Time of the Day

This study analyzed the effects of noise levels and number of visitors on the behaviors of a mother puma and her daughter in a zoo environment with respect to the time of day. The study monitored visitation (noise and number) over two 1-week periods (4 weeks between periods) and frequency of various puma behaviors (videorecorded). The study analyzed videotaped behavior of the pumas based on the time of day and visitors number and noise levels. There was a direct association of puma behaviors with visitors number and noise levels. The daughter puma was the most affected and behavioral changes of both pumas correlated more strongly with the noise level than the number of visitors. The noise level and number of visitors affected the behavior of the mother and her daughter only in the morning. The results of this study indicate that both noise level and number of visitors affected these pumas but revealed the noise as predominant. Moreover, the response of these pumas to visitors depended on the time of the day.

The shared influence of phylogeny and ecology on the reproductive patterns of Myrteae (Myrtaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)