Effects of substrate temperature, substrate orientation, and energetic atomic collisions on the structure of GaN films grown by reactive sputtering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Temperatura e substrato para o teste de germinação de sementes de pinhão-manso

Official rules for seed analysis don't establish criteria to execute germination tests for all species. This way, the aim of this research was to determinate the substrate, temperature and counting time for the germination test of physic nut seeds. For the germination test, four replications of 20 seeds were used, evaluating daily the normal seedlings until the end of germination. Initially, the substrates with sowing in vermiculite, were evaluated in rolled paper towels, in sand and in soil using alternating temperature of 20-30 degrees C. The most favorable substrates for germination were evaluated with another stage, using constant temperatures of 25, 30 and 35 degrees C and alternating ones, of 15-35 degrees C, 20-35 degrees C and 20-30 degrees C. One concluded that the germination test of physic nut seeds must be performed with the alternating temperature of 20-30 degrees C in sand or paper towel and with final counting 10 days after sowing.

Germinação de sementes de Mimosa caesalpiniaefolia Benth. em diferentes substratos e temperaturas

A Mimosa caesalpiniaefolia Benth. é uma espécie nativa da região Nordeste, que vem sendo progressivamente cultivada do Maranhão ao Rio de Janeiro. A planta apresenta grande potencial para arborização, cerca viva e produção de madeira. O presente trabalho teve como objetivo definir o tipo de substrato, a temperatura, o tempo médio e a frequência relativa de germinação, para auxiliar a condução de testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia. Para tanto, realizou-se um experimento no Laboratório de Análise de Sementes do CCA-UFPB, em Areia-PB, em delineamento inteiramente casualizado com os tratamentos distribuídos em esquema fatorial 4x4, com os fatores temperaturas (20, 25, 30ºC constantes e 20-30ºC alternadas) e substratos (entre papel, sobre papel, entre areia e entre vermiculita), em quatro repetições de 25 sementes. Foram analisados os seguintes parâmetros: porcentagem de germinação e de plântulas anormais, primeira contagem da germinação e velocidade de germinação, tempo médio e frequência relativa de germinação, massa fresca e massa seca de plântulas. A temperatura de 25ºC mostrou-se mais adequada para a condução dos testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia, independentemente do substrato utilizado. O substrato entre papel foi o mais apropriado para avaliação da qualidade fisiológica das sementes e a sincronização do processo germinativo foi maior no substrato entre papel, independentemente da temperatura empregada.

Properties of DLC films deposited by an oxyacetylene flame

Diamond-like carbon (DLC) films were obtained by spinning a tungsten carbide substrate at a high speed using an oxyacetylene flame. The films deposited at a typical experimental condition of substrate temperature of 810 degrees C, rotation of 600 rpm and 3 h deposition time, exhibited an uniform, very smooth, hard and glassy surface covering the entire exposed face of the substrate. These films were identified as DLC by their characteristic broad Raman spectra centered at 1554 cm(-1) and micro-Vicker's hardness > 3400 kg mm(-2). For substrate temperatures < 800 degrees C the film started losing the uniform glassy surface and the hardness deteriorated. For temperatures > 950 degrees C the film was still hard and shiny, but black in color. DLC films were also obtained in a wide range of speeds of rotation (300-750 rpm), as long as the temperature remained close to 850 degrees C. (C) 1999 Elsevier B.V. S.A. All rights reserved.

Adequação da metodologia para o teste de germinação de sementes de pitaia vermelha

Hylocereus undatus (Haw.), popularmente conhecida como pitaia vermelha é uma cactácea para a qual se tem registrado um aumento de consumo nos últimos anos e, por ser ainda pouco explorada, vários aspectos referentes à sua propagação ainda são desconhecidos. Até o momento, não existem critérios para a execução de testes de germinação para sementes dessa espécie, publicados nas Regras para Análise de Sementes. Nesse sentido, objetivou-se com este trabalho adequar a metodologia quanto ao substrato, temperatura e tempo de contagem inicial e final para o teste de germinação. Foram testados quatro substratos (rolo de papel, areia, vermiculita e solo) e quatro temperaturas (20, 25, 30 e 20-30°C). O efeito dos substratos no desempenho germinativo das sementes foi avaliado pelo teste de germinação e de primeira contagem instalado com quatro subamostras de 50 sementes. Foram feitas contagens diárias do número de plântulas emergidas até atingirem a estabilidade e, no final do experimento, foram avaliados a porcentagem de germinação das sementes, considerando as plântulas normais, anormais e sementes mortas. Concluiu-se que o teste de germinação de sementes de pitaia vermelha deve ser realizado à temperatura constante de 25°C em rolo de papel, com contagens inicial e final aos cinco e dez dias após a semeadura, respectivamente.

Thermal evaporation furnace with improved configuration for growing nanostructured inorganic materials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Temperatura e substrato para o teste de germinação de sementes de barbatimão ((Stryphnodendron adstringens (Mart.) Coville (Leguminosae))

As normas oficiais para análise de sementes não estabelecem critérios para a execução de testes de germinação da maioria das espécies florestais. Assim, o objetivo deste trabalho foi a determinação do substrato, da temperatura e da necessidade de superação da dormência das sementes para o teste de germinação de Stryphnodendron adstringens. Foram avaliados o tratamento de escarificação com ácido sulfúrico por 60 min, os substratos vermiculita, rolo de papel, areia e solo e as temperaturas constantes de 20, 25, 30 e 35 ºC e alternadas de 15-35 ºC e 20-30 ºC, utilizando-se a primeira contagem de germinação (7 dias) e a porcentagem de plântulas normais, anormais, sementes mortas e dormentes (42º dia após a semeadura) com quatro repetições de 50 sementes. As sementes de S. adstringens devem ser submetidas ao teste de germinação, após superação da dormência, em substrato papel e nas temperaturas constantes de 25, 30 ou 35 ºC ou alternadas de 20-30 ºC.

Structural electrical and optical properties of undoped and indium doped ZnO thin films prepared by the pyrosol process at different temperatures

The influence of the substrate temperature on the structural features and opto-electrical properties of undoped and indium-doped ZnO thin films deposited by pyrosol process was investigated. The addition of indium induces a drastic decrease (by a factor approximate to 10(10) for samples deposited at 300 degreesC) in the electrical resistivity of films, the lowest electrical resistivity (6 mOmega-cm) being observed for the film deposited at 450 degreesC. Films are highly transparent (>80%) in the Vis-NIR ranges, and the optical band gap exhibits a blue shift (from 3.29 to 3.33 eV) for the In-doped films deposited at increasing temperature. Preferential orientation of the ZnO crystallites with the c-axis perpendicular to the substrate surface and an anisotropic morphology of the nanoporous structure was observed for films growth at 300 and 350 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Pyrosol preparation and structural characterization of SnO2 thin films

Polycrystalline tin oxide thin films were prepared from ethanol solution of SnCl2.H2O (concentrations: 0.05, 0.1, 0.2 and 0.4 mol/dm(3)) at different substrate temperatures ranging from 300 to 450 degreesC. The kinetic deposition processes were studied in terms of various process parameters. The crystal phases, crystalline structure, grain size and surface morphology are revealed in accordance to X-ray diffractometry and scanning electron microscopy (SEM). Texture coefficients (TCs) for (110), (2 0 0), (2 11) and (3 0 1) reflections of the tetragonal SnO2 were calculated. Structural characteristics of deposited films with respect to varying precursor chemistry and substrate temperature are presented and discussed. (C) 2003 Published by Elsevier B.V.

The valuable role of renucleation rate in ultrananocrystalline diamond growth

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films

In this work we optimized conditions for aerosol deposition of homogeneous, nano-grained, smooth Ba0.8Sr0.2TiO3 thin films. Investigation involved optimization of deposition parameters, namely deposition time and temperature for different substrates. Solutions were prepared from titanium isopropoxide, strontium acetate and barium acetate. Films were deposited on Si (1 0 0) or Si covered by platinum (Pt (1 1 1) /Ti/SiO2/Si). Investigation showed that the best films were obtained at substrate temperature of 85 degrees C. After deposition films were slowly heated up to 650 degrees C, annealed for 30 min, and slowly cooled. Grain size of BST films deposited on Si substrate were in the range 40-70 nm, depending on deposition conditions, while the same films deposited on Pt substrates showed mean grain size in the range 35-50 nm. Films deposited under optimal conditions were very homogeneous, crack-free, and smooth with rms roughness lower than 4 nm for both substrates.

Caracterização morfométrica de sementes e plântulas e germinação de anadenanthera macrocarpa (benth.) brenan

Anadenanthera macrocarpa (Benth.) Brenan is a tree species belonging to the family Leguminosae-Mimosoideae which is popularly known as mimosa-black. It features characteristics of early successional, natural occurrence in Brazil and can form clusters almost homogeneous, with great potential in the recovery of degraded areas. This study was conducted at the Center for Agricultural Sciences, University Federal of Alagoas state, aiming at the physical and morphological characterization of seeds, describing the various stages of post-seminal development, and to evaluate various conditions of temperature and substrate to perform the test germination. The seeds were manually extracted, then homogenized, where two samples of 50 seeds were used to determine the initial moisture. Another sample, consisting of eight repetitions of 100 seeds was used to measure the biometry and the number of seeds per fruit. The morphological characterization and the seeds were immersed in distilled water to allow the cuts to the observed structure in microscopes. In the post-seminal study, it was observed the daily processes of seedling growth in rolled paper filter and constant temperature of 30 °C. To assess the germination behavior, the constant temperatures of 15 °C, 25 °C, 30 °C, 40 °C and 20-30 °C as well as the paper and the sand substrates were tested and it was evaluated the percentage, the rate of germination, the relative frequency distribution, and the tests conducted in a randomized design in factorial 5 x 2 (x substrate temperature) with four replicates of 25 seeds, and the averages compared by Duncan 5 % probability. The fruits of black angico show great variation in the seed number per fruit. The embryonic axis occupies part of the central region of the seed with axial and linear positions. The germination is epigeal and the seedlings are fanerocotylar. The temperature determines the 30 °C and the filter paper substrate provided higher average percentage and germination rate.

Structural transition of ZnO thin films produced by RF magnetron sputtering at low temperatures

Zinc oxide (ZnO) thin films were prepared using reactive radio-frequency magnetron sputtering of a pure metallic zinc target onto glass substrates. The evolution of the surface morphology and the optical properties of the films were studied as a function of the substrate temperature, which was varied from 50 to 250 C. The surface topography of the samples was examined using atomic force microscopy (AFM), and their optical properties were studied via transmittance measurements in the UV-Vis-NIR region. DRX and AFM analyses showed that the surface morphology undergoes a structural transition at substrate temperatures of around 150 C. Actually, at 50 C the formation of small grains was observed while at 250 C the grains observed were larger and had more irregular shapes. The optical gap remained constant at ∼3.3 eV for all films. In the visible region, the average optical transmittance was 80 %. From these results, one can conclude that the morphological properties of the ZnO thin films were more greatly affected by the substrate temperature, due to mis-orientation of polycrystalline grains, than were the optical properties. © 2013 Springer Science+Business Media New York.

Preparação e caracterização óptica de filmes nanocristalinos de GaAs:H depositados por RF magnetron sputtering

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Influência da temperatura e do tipo de substrato em filmes de GaN depositados por magnetron sputtering reativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)