Global stratigraphy, palaeobiogeography and palaeoecology of Albian-Maastrichtian pithonellid calcispheres: impact on Tethys configuration

This study reviews the stratigraphy, palaeobiogeography and palaeoecology of some important Albian-Maastrichtian pelagic calcispheres: Bonetocardiella conoidea, Pithonella ovalis, P. perlonga, P. sphaerica and P. trejoi. It also presents a significant new data set on these organisms from the western South Atlantic Ocean. The group reached its acme simultaneously all over the world during the highest Cretaceous sea level in late Albian to Coniacian times. A strong association also existed between the maximum temperature and the salinity of the Tethyan water mass and the climax of these opportunistic microfossils. Their remarkable presence along the Brazilian and west African margins during the Albian, in association with other typical Tethyan pelagic biotic elements, indicates that during this period the northern South Atlantic was a long, narrow arm of the Tethys Sea. (C) 2000 Academic Press.

Microfacies and sequence stratigraphy of the Amapa Formation, Late Paleocene to Early Eocene, Foz do Amazonas Basin, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Discrimination of geomorphic surfaces with multivariate analysis of soil attributes in sandstone - basalt lithosequence

O conceito de superfície geomórfica permite uma interligação entre os diferentes ramos da ciência do solo, tais como geologia, geomorfologia e pedologia. Esta associação favorece a compreensão da distribuição espacial dos solos na paisagem, e torna possível compreender o comportamento dos atributos do solo, que estão principalmente relacionadas com a estratigrafia e formas do relevo. Assim, este estudo visa à aplicação da estatística multivariada para categorizar superfícies geomórficas em uma litossequência arenito-basalto, de modo a fornecer uma base para a avaliação do solo em áreas afins. A área de estudo está localizada no município de Pereira Barreto, São Paulo, Brasil. A área escolhida possui 530 hectares, onde foram localizadas e mapeadas três superfícies geomórficas (I, II e III). Na área, 134 amostras foram coletadas nas profundidades de 0,0-0,2 m e 0,8-1,0 m, foram determinados os conteúdos de areia, silte e argila, pH em CaCl2, conteúdo de MO, P, Ca, Mg, K, Al e H+Al. Com base nos resultados, foram realizadas a análise univariada e multivariada de variância, clusters e principal componente, a fim de comparar as três superfícies geomórficas. A análise estatística univariada dos atributos do solo não foi eficiente na identificação das três superfícies geomórficas. Utilizando-se os atributos físicos e químicos do solo, as técnicas estatísticas multivariada permitiram à separação dos três grupos de corpos naturais do solo que foram equivalentes as três superfícies geomórficas mapeadas. Estes resultados são interessantes, pois demonstram a viabilidade da utilização de classificação numérica das superfícies geomórficas para ajudar no mapeamento de solo.

Major developments in conulariid research: problems of interpretation and future perspectives

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sedimentation of the Cretaceous Bauru Group in São Paulo, Parana Basin, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prospecção geofísica em ocorrência de cobre localizada na bacia sedimentar do Camaquã (RS)

Estudos de pesquisa mineral são fundamentais para o reconhecimento e a incorporação de novas reservas. Esse trabalho apresenta os resultados de aplicação do método geofísico da eletrorresistividade numa ocorrência mineralizada em carbonatos de cobre, por meio da técnica de caminhamento elétrico em arranjo azimutal. A área de estudos está inserida na bacia sedimentar do Camaquã, formada por um conjunto de unidades estratigráficas sedimentares e vulcanogênicas, onde são descritas diversas ocorrências cupríferas. A presença de azurita e malaquita em fraturas e zonas de maior porosidade em arenito encaixante define a geologia local. Os modelos de inversão revelam anomalias circulares de resistividade moderada para até 25m abaixo da ocorrência aflorante e anomalias de baixa resistividade em profundidades abaixo de 25m, além de áreas adjacentes com alta resistividade. Indicadores de mineralização descritos para ocorrências de cobre estudadas, no âmbito da bacia sedimentar do Camaquã, ocorrem na área de estudos e permitem caracterização em termos de resistividade elétrica. Áreas com silicificação apresentam alta resistividade, enquanto que valores intermediários são atribuídos a zonas com carbonatação e, finalmente, áreas de baixa resistividade, provavelmente, indicam concentrações de sulfetos disseminados.

Drill holes in shells of Permian benthic invertebrates

Newly discovered benthic fossils and specimens illustrated in the paleontological literature indicate that drilling predators (or parasites) were present in the Permian. New field data from southern Brazil document the first drill holes ever reported for Permian bivalve mollusks. In addition, a literature review revealed drill holes in shells of articulate brachiopods from Russia, Greece, and West Texas. Holes range in size from 0.1 to 5.8 mm and are typically round, cylindrical, singular penetrations perpendicular to the valve surface. Incomplete, healed, and multiple holes are absent. Drilling frequency, a proxy for predation intensity, is very low: less than 1 percent (this estimate may be seriously affected by taphonomic and monographic biases). Literature data suggest that frequency of drilled specimens varied significantly among higher brachiopod taxa. The geography and stratigraphy of drilled specimens indicate that drilling organisms were worldwide in their occurrence and continuously present in marine ecosystems throughout the Permian. This report is consistent with other recent studies indicating that although drillers were continuously present throughout the Phanerozoic, drilling intensity was lower in the Late Paleozoic and early Mesozoic.

A stratigraphic chart of the Late Carboniferous/Permian succession of the eastern border of the Parana Basin, Brazil, South America

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Calcretes of the Bauru Group ( Cretaceous), Brazil; petrology and geological significance.

Reinterprets petrologic studies and their geologic significance in the light of recent literature on the calcretes in the world, and the recent revision of Bauru Group stratigraphy.-from English summary

Concepcoes estratigraficas em analise de Bacias: A) a estratigrafia tradicional

This article is the first part of an overall theme dealing with different stratigraphic approaches to basin analysis. The traditional stratigraphy, based on formal units, is discussed here with an attempt to analyse their principles, methods and purposes. Using the Permian carboniferous sequence of Parana Basin as a paradigm, some critical inferences concerning the limitations of such an approach in environmental reconstruction are attained. -English summary

Concepcoes estratigraficas em analise de bacias: C) a estratigrafia genetica

The present work fits the concepts of depositional systems and depositional sequence as paralithostratigraphic and parachronostratigraphic units, respectively, and discusses the advantages of using this approach in environmental reconstructions. The depositional system concept came to a focus as a link between sedimentology and stratigraphy since it represents both a facies association and a mapping unit. Additionally, the depositional sequence represents the sedimentary episode of relative sea level change, in interaction with basin paleophysiography. In such a way a time-space diagnosis is reached in environmental interpretation as illustrated by the Permian-Carboniferous sequence of the Parana Basin. -English summary

Afloramento - modelo da Formacao Piramboia

This short paper describes an outcrop that is a very good example of the aeolian sedimentation in the Piramboia Formation (Triassic) in the Parana Basin. -English summary

Marcos estratigraficos regionais na Formacao Palermo: caracterizacao dos picos radioativos

During a basinal scale study on Palermo Formation (Upper Permian, Parana Basin) high elevated Gamma Ray picks were identified mainly in the lower third of that stratigraphic unit. Those Gamma Ray signatures have been used as good regional stratigraphic markers. From them it was possible one chronostratigraphic analysis of Palermo Formation as pointed out by previous papers (Perinotto). Potassium40 is the responsible for the high Gamma Ray picks in the Palermo Formation. -from English summary

Seqüência Ordovício-Siluriana e Devoniana no Flanco Norte da Bacia do Paraná

Two stratigraphic sequences characterize the basal units of the Paraná basin. The Ordovician-Silurian sequence overlie directly the Neoproterozoic basement and consists of a 55m-thick unit of coarse-grained sandstones, diamictites, fossiliferous shales and fine-grained micaceous sandstones. The Alto Garças Formation constitutes the base of the sequence and is made of coarse-grained, massive and reddish sandstones associated with conglomeratic lenses. Diamictites with pebbles of diverse composition in siltic and arenaceous matrix were deposited during the Ordovician-Silurian glaciation. Whenever the basal sandstones are absent, the diamictites directly overlie the basement. The diamictites were previously included in the Vila Maria Formation. However our study revealed that they are part of the Iapó Formation. A transgressive event following the glaciation is marked by the deposition of the Vila Maria Formation, which is characterized by fossiliferous (mollusks, brachiopods, cryptospores and microplankton) and laminated shales and siltstones, grading upward to fine-grained micaceous sandstones with hummocky cross stratification. Layers containing trace fossils (Anthrophycus) occur at the transition between the siltstones and the sandstones. The Devonian sequence is represented by 80-170 meters thick sandstones of the Furnas Formation (lower unit) and a sucession of sandstones, siltstones and shales of the Ponta Grossa Formation (upper unit). Unlike other areas of the Paraná Basin, the Ponta Grossa Formation is characterized by coarsening-upward succession beginning with fine sandstones and grading upward to coarse and very-coarse sandstone beds. Cretaceous modifying tectonics affected the Paleozoic sequences, which are cut by a series of faults, in some cases showing displacements greater than 500 meters.